Implementing collaborative practices in the healthcare supply chain:insights into hospital-vendor operations

The paper discusses the characteristics of healthcare supply chains, and puts particular emphasis on the implementation of VMI/CMI in this sector specific context. By the means of case study research the paper provides empirical data on the benefits of the above collaborative practices for both the hospital and vendors. The paper contributes to the stream of research on VMI/CMI in the healthcare sector, where limited research attempts have been conducted so far. In contrast to other surveys this case study shows that specific and measurable cost reductions exist, in addition to other improvements such as better control over the inventories, and also in reduction of administrative work. Results obtained may be also relevant to other hospitals and vendors and as they can form a basis for comparisons. Copyright © 2013 Inderscience Enterprises Ltd.

Selection of simulation tools for improving supply chain performance

Simulation is an effective method for improving supply chain performance. However, there is limited advice available to assist practitioners in selecting the most appropriate method for a given problem. Much of the advice that does exist relies on custom and practice rather than a rigorous conceptual or empirical analysis. An analysis of the different modelling techniques applied in the supply chain domain was conducted, and the three main approaches to simulation used were identified; these are System Dynamics (SD), Discrete Event Simulation (DES) and Agent Based Modelling (ABM). This research has examined these approaches in two stages. Firstly, a first principles analysis was carried out in order to challenge the received wisdom about their strengths and weaknesses and a series of propositions were developed from this initial analysis. The second stage was to use the case study approach to test these propositions and to provide further empirical evidence to support their comparison. The contributions of this research are both in terms of knowledge and practice. In terms of knowledge, this research is the first holistic cross paradigm comparison of the three main approaches in the supply chain domain. Case studies have involved building ‘back to back’ models of the same supply chain problem using SD and a discrete approach (either DES or ABM). This has led to contributions concerning the limitations of applying SD to operational problem types. SD has also been found to have risks when applied to strategic and policy problems. Discrete methods have been found to have potential for exploring strategic problem types. It has been found that discrete simulation methods can model material and information feedback successfully. Further insights have been gained into the relationship between modelling purpose and modelling approach. In terms of practice, the findings have been summarised in the form of a framework linking modelling purpose, problem characteristics and simulation approach.

An investigation into the adoption of electronic commerce among Saudi Arabian SMEs

Despite the proliferation of e-commerce adoption by SMEs and the world-wide growth of e-commerce, in general there is a paucity of empirical studies that examine the adoption of e-commerce by SMEs in the Middle East. In this paper, the authors provide insights into the salient e-commerce adoption issues by focusing on Saudi Arabian SMEs. This research was designed using a qualitative approach through in-depth case studies selected from firms in Saudi Arabia. The findings contribute toward a better conceptual and practical understanding of the main factors driving SMEs to adopt e-commerce. The authors find that the level of e-commerce implementation has yet to mature and customer readiness for Internet shopping must improve before e-commerce reaches the levels of maturity seen in other regions of the world. This study highlights directions for future inquiry and implications for information and technology managers and policymakers in developing Arab nations.

An investigation into the adoption and implementation of electronic commerce in Saudi Arabian small and medium enterprises

Saudi Arabian Small and Medium Enterprises (SMEs) will face fierce competition from new entrants to local markets as a result of their accession to the Word Trade Organisation (WTO), and electronic commerce (e-commerce) technologies can reinforce SME’s competitive edge. This study investigates the state of e-commerce adoption and analyses the factors that determine the extent to which SMEs in Saudi Arabia are inclined towards deploying e-commerce technologies. This could assist future firms in designing effective implementation projects. Seven SMEs’ e-commerce adoption levels are studied as a case. The Technology-Organization-Environment (TOE) framework was used as the major source of inspiration in our analysis of e-commerce adoption amongst Saudi SMEs. In addition to advancing research on e-commerce in Saudi Arabia, this chapter also highlights several directions for future inquiry and implications for managers and policymakers.

Reverse resource exchanges in service supply chains:the case of returnable transport packaging

Purpose: The purpose of this paper is to understand how reverse resource exchanges and resource dependencies are managed in the service supply chain (SSC) of returnable transport packaging (RTP). Design/methodology/approach: A single case study was conducted in the context of automotive logistics focusing on the RTP SSC. Data were collected through 16 interviews, primarily with managers of a logistics service provider (LSP) and document analysis of contractual agreements with key customers of the packaging service. Findings: Resource dependencies among actors in the SSC result from the importance of the RTP for the customer’s production processes, the competition among users for RTP and the negative implications of the temporary unavailability of RTP for customers and the LSP (in terms of service performance). Amongst other things, the LSP is dependent on its customers and third-party users (e.g. the customer’s suppliers) for the timely return of package resources. The role of inter-firm integration and collaboration, formal contracts as well as customers’ power and influence over third-party RTP users are stressed as key mechanisms for managing LSP’s resource dependencies. Research limitations/implications: A resource dependence theory (RDT) lens is used to analyse how reverse resource exchanges and associated resource dependencies in SSCs are managed, thus complementing the existing SSC literature emphasising the bi-directionality of resource flows. The study also extends the recent SSC literature stressing the role of contracting by empirically demonstrating how formal contracts can be mobilised to explicate resource dependencies and to specify, and regulate, reverse exchanges in the SSC. Practical implications: The research suggests that logistics providers can effectively manage their resource dependencies and regulate reverse exchanges in the SSC by deploying contractual governance mechanisms and leveraging their customers’ influence over third-party RTP users. Originality/value: The study is novel in its application of RDT, which enhances our understanding of the management of reverse exchanges and resource dependencies in SSCs.

The role of third party logistics providers (3PLs) in the adoption of green supply chain initiatives

The increasing importance of environmental sustainability has sharpened the focus on the need for innovative approaches to the purchasing of transport and logistics services. This article points out some of the challenges that purchasers of transport and logistics services, as well as their suppliers in the third party logistics (3PL) industry, are facing. These include the need for closer collaboration between 3PLs and their customers, as well as developing systems for the robust assessment of the environmental sustainability of services. The article is based on several years’ research experience in Ireland, Italy and Sweden.

Integrating supply chain operations in the Internet era

The internet's potential impact on supply chain operations is often approached in the literature in a quite generic way due to the complex nature of supply chains and the different levels of operations' integration. Drawing on existing research, this paper proposes an overall framework of supply chain integration and then attempts to provide a categorisation of the internet's role in the supply chain activities, providing insights from various sectors. The purpose of this paper is to describe and present the alternative ways that the internet impacts on the integration of supply chain operations, by comparing four different sectors: the automotive, the computer, the food and the grocery sector. The paper concludes that in the food, grocery and computer sector, internet's impact on supply chain operations has been quite poor, particularly forward integration, while it has been significant, in the backward integration of the automotive sector. Copyright © 2007 Inderscience Enterprises Ltd.

Internet-based applications in the agri-food supply chain:a survey on the Greek canning sector

In the agri-food industry, Internet-based applications changed the way companies conduct business mainly by facilitating activities that were already taking place, rather by giving birth to virtual networks creation. Due to the specific characteristics of the sector, Internet's huge potential has not been fully exploited yet, still remaining a new communication tool. This paper aims at giving empirical insights regarding the use of Internet-based applications in the agri-food supply chain, by focusing on the Greek fruit canning sector. In particular, the paper identifies companies' perceptions regarding perceived benefits, constrained factors and motivation factors towards the use of Internet-based applications. Results indicate that companies recognise benefits arising from the use of Internet, however they still use traditional ways when communicating with their partners. Regarding transportation issues, while companies' overall satisfaction is rather moderate and differs significantly from the importance placed on a number of criteria, companies are still sceptical in using Electronic Transportation Marketplace. © 2004 Elsevier Ltd. All rights reserved.

Design and development of logistics workflow systems for demand management with RFID

This paper discusses demand and supply chain management and examines how artificial intelligence techniques and RFID technology can enhance the responsiveness of the logistics workflow. This proposed system is expected to have a significant impact on the performance of logistics networks by virtue of its capabilities to adapt unexpected supply and demand changes in the volatile marketplace with the unique feature of responsiveness with the advanced technology, Radio Frequency Identification (RFID). Recent studies have found that RFID and artificial intelligence techniques drive the development of total solution in logistics industry. Apart from tracking the movement of the goods, RFID is able to play an important role to reflect the inventory level of various distribution areas. In today’s globalized industrial environment, the physical logistics operations and the associated flow of information are the essential elements for companies to realize an efficient logistics workflow scenario. Basically, a flexible logistics workflow, which is characterized by its fast responsiveness in dealing with customer requirements through the integration of various value chain activities, is fundamental to leverage business performance of enterprises. The significance of this research is the demonstration of the synergy of using a combination of advanced technologies to form an integrated system that helps achieve lean and agile logistics workflow.

Decision support system for vendor managed inventory supply chain:a case study

Vendor-managed inventory (VMI) is a widely used collaborative inventory management policy in which manufacturers manages the inventory of retailers and takes responsibility for making decisions related to the timing and extent of inventory replenishment. VMI partnerships help organisations to reduce demand variability, inventory holding and distribution costs. This study provides empirical evidence that significant economic benefits can be achieved with the use of a genetic algorithm (GA)-based decision support system (DSS) in a VMI supply chain. A two-stage serial supply chain in which retailers and their supplier are operating VMI in an uncertain demand environment is studied. Performance was measured in terms of cost, profit, stockouts and service levels. The results generated from GA-based model were compared to traditional alternatives. The study found that the GA-based approach outperformed traditional methods and its use can be economically justified in small- and medium-sized enterprises (SMEs).

Holonic supply chain:a study from family-based manufacturing perspective

In the contemporary business environment, to adhere to the need of the customers, caused the shift from mass production to mass-customization. This necessitates the supply chain (SC) to be effective flexible. The purpose of this paper is to seek flexibility through adoption of family-based dispatching rules under the influence of inventory system implemented at downstream echelons of an industrial supply chain network. We compared the family-based dispatching rules in existing literature under the purview of inventory system and information sharing within a supply chain network. The dispatching rules are compared for Average Flow Time performance, which is averaged over the three product families. The performance is measured using extensive discrete event simulation process. Given the various inventory related operational factors at downstream echelons, the present paper highlights the importance of strategically adopting appropriate family-based dispatching rule at the manufacturing end. In the environment of mass customization, it becomes imperative to adopt the family-based dispatching rule from the system wide SC perspective. This warrants the application of intra as well as inter-echelon information coordination. The holonic paradigm emerges in this research stream, amidst the holistic approach and the vital systemic approach. The present research shows its novelty in triplet. Firstly, it provides leverage to manager to strategically adopting a dispatching rule from the inventory system perspective. Secondly, the findings provide direction for the attenuation of adverse impact accruing from demand amplification (bullwhip effect) in the form of inventory levels by appropriately adopting family-based dispatching rule. Thirdly, the information environment is conceptualized under the paradigm of Koestler's holonic theory.

Detecting EPCIS exceptions in linked traceability streams across supply chain business processes

The EPCIS specification provides an event oriented mechanism to record product movement information across stakeholders in supply chain business processes. Besides enabling the sharing of event-based traceability datasets, track and trace implementations must also be equipped with the capabilities to validate integrity constraints and detect runtime exceptions without compromising the time-to-deliver schedule of the shipping and receiving parties. In this paper we present a methodology for detecting exceptions arising during the processing of EPCIS event datasets. We propose an extension to the EEM ontology for modelling EPCIS exceptions and show how runtime exceptions can be detected and reported. We exemplify and evaluate our approach on an abstraction of pharmaceutical supply chains.