Measuring the spatial extent of texture pooling using reverse correlation

The local image representation produced by early stages of visual analysis is uninformative regarding spatially extensive textures and surfaces. We know little about the cortical algorithm used to combine local information over space, and still less about the area over which it can operate. But such operations are vital to support perception of real-world objects and scenes. Here, we deploy a novel reverse-correlation technique to measure the extent of spatial pooling for target regions of different areas placed either in the central visual field, or more peripherally. Stimuli were large arrays of micropatterns, with their contrasts perturbed individually on an interval-by-interval basis. By comparing trial-by-trial observer responses with the predictions of computational models, we show that substantial regions (up to 13 carrier cycles) of a stimulus can be monitored in parallel by summing contrast over area. This summing strategy is very different from the more widely assumed signal selection strategy (a MAX operation), and suggests that neural mechanisms representing extensive visual textures can be recruited by attention. We also demonstrate that template resolution is much less precise in the parafovea than in the fovea, consistent with recent accounts of crowding. © 2014 The Authors.

Design and development of logistics workflow systems for demand management with RFID

This paper discusses demand and supply chain management and examines how artificial intelligence techniques and RFID technology can enhance the responsiveness of the logistics workflow. This proposed system is expected to have a significant impact on the performance of logistics networks by virtue of its capabilities to adapt unexpected supply and demand changes in the volatile marketplace with the unique feature of responsiveness with the advanced technology, Radio Frequency Identification (RFID). Recent studies have found that RFID and artificial intelligence techniques drive the development of total solution in logistics industry. Apart from tracking the movement of the goods, RFID is able to play an important role to reflect the inventory level of various distribution areas. In today’s globalized industrial environment, the physical logistics operations and the associated flow of information are the essential elements for companies to realize an efficient logistics workflow scenario. Basically, a flexible logistics workflow, which is characterized by its fast responsiveness in dealing with customer requirements through the integration of various value chain activities, is fundamental to leverage business performance of enterprises. The significance of this research is the demonstration of the synergy of using a combination of advanced technologies to form an integrated system that helps achieve lean and agile logistics workflow.

A case study analysis on information and communication technology usage in small logistics service companies

The impact of ICT (information and communications technology) on the logistics service industry is reshaping its organisation and structure. Within this process, the nature of changes resulting from ICT dissemination in small 3PLs (third party logistics providers) is still unclear, although a large number of logistics service markets, especially in the EU context, are populated by a high number of small 3PLs. In addition, there is still a gap in the literature where the role of technological capability in small 3PLs is seriously underestimated. This gives rise to the need to develop investigation in this area. The paper presents the preliminary results of a case study analysis on ICT usage in a sample of 7 small Italian 3PLs. The results highlight some of the barriers to effective ICT implementation, as well as some of the critical success factors.

Integrated logistics and supply chain management:the state of practice in Ireland

The Republic of Ireland and Northern Ireland were provided with aid to offset locational disadvantages in the run up to the Single European Market. Since then the Republic has emerged as the fastest growing member of the E.U. Success has not been underpinned by the transport system, suggesting that business has had to overcome locational disadvantages by strong performance elsewhere in the supply chain. The evidence indicates that there are Irish firms operating supply chain management techniques at a truly international standard. The problem is that there are so few in that category Meeting Ireland’s competitiveness challenge means closing the gap between the small group of large and foreign-owned firms, which display excellence in SCM, and the larger group of indigenous small and medium size businesses, which do not.

Logistics Innovation in Small 3PLs:what is the Role of ICT?

For companies competing in highly dynamic markets, the search for new sources of competitive advantages is mandatory. Innovation is considered a fundamental component of a successful business as it allows companies to sustain profit margins and sales growth and to reduce pressures coming from competitors. In the knowledge-driven economy, information and communication technology (ICT) plays an important role as it enables innovation in product/service, processes and organisations especially in service companies. This paper investigates the role of ICT in logistics innovation. The focus of the paper is on the effects that ICT usage is having on the management of small third-party logistics service providers (3PLs). On the basis of quantitative and qualitative evidence emerging from a recent survey carried out on the Italian logistic service market, the paper analyses how ICT is used to support logistics innovation and the factors inhibiting/facilitate the usage of ICT in such companies. Implications for logistics innovation management will be outlined from both research and managerial perspectives.

Technology influences on small logistics providers:a case study analysis

ICT has triggered many changes in the logistics service industry. New technology is reshaping the organisation and structure of this industry as ICT impacts significantly on the operations of 3PLs. Within this process, while large 3PLs are gaining substantial benefits from technology usage, the nature of changes resulting from ICT usage in small 3PLs remains unclear. This is critical particularly for those markets populated by a high number of small 3PLs such as the Italian logistics industry. From the research point of view, there is still a gap in the literature where the role of technological capability in small 3PLs are seriously underestimated. This gives rise to the need to develop investigation in this area. This paper presents the preliminary results of a case study analysis on ICT usage in a sample of 7 small Italian 3PLs. The results highlight some of the barriers to effective ICT implementation, as well as some of the critical success factors.

An exploratory study of ICT usage in small logistics service providers

Information and communication technology (ICT) developments have strongly affected supply chain management (SCM) in recent years. ICT has had a great impact on all supply chain processes including planning, purchasing, production management, stock management, physical distribution and related integration management. Technology has become an important dimension of third party logistics (3PL) service supply as competitive advantage increasingly depends on the ability to create value for customers through the effective application of ICT. Within this process, while large 3PLs are gaining substantial benefits from technology usage and implementation, the magnitude of changes spurred by ICT dissemination in small logistics service providers remains unclear. This is reflected by the existing gap in literature where the role and competitive developing processes of small 3PLs are seriously underestimated. This gives rise to the need to develop research and investigation in this particular area. The objective of this paper is to narrow the knowledge gap in the field of ICT adoption in small 3PLs through an empirical investigation. It presents the results of a survey on a sample of small Italian 3PLs.

Purchasing green transport and logistics services:implications from the environmental sustainability attitude of 3PLs

Environmental sustainability is an area of increasing importance for third party logistics (3PL) companies. As the design and implementation of services requires interaction between buyer and 3PL, the 3PLs are in a critical position to support the efforts towards greening operations of different supply chain participants. However the literature in this field reflects a gap between the perspectives of buyers and 3PLs. This chapter attempts to fill this void through an explorative case study analysis on the environmental attitude of 3PLs in order to derive implications for buyers’ behavior. The results indicate that the buyer’s role is critical in different ways in the development of green initiatives among 3PLs. An increased orientation towards longer-term contracts and joint development would likely enhance the level of green initiatives. Indirectly, the buyer has the opportunity to influence its 3PLs through interaction with employees on different levels in the company, including top management.

Desalination of brackish water by a batch reverse osmosis desalink system for use with solar thermal energy

For remote, semi-arid areas, brackish groundwater (BW) desalination powered by solar energy may serve as the most technically and economically viable means to alleviate the water stresses. For such systems, high recovery ratio is desired because of the technical and economical difficulties of concentrate management. It has been demonstrated that the current, conventional solar reverse osmosis (RO) desalination can be improved by 40–200 times by eliminating unnecessary energy losses. In this work, a batch-RO system that can be powered by a thermal Rankine cycle has been developed. By directly recycling high pressure concentrates and by using a linkage connection to provide increasing feed pressures, the batch-RO has been shown to achieve a 70% saving in energy consumption compared to a continuous single-stage RO system. Theoretical investigations on the mass transfer phenomena, including dispersion and concentration polarization, have been carried out to complement and to guide experimental efforts. The performance evaluation of the batch-RO system, named DesaLink, has been based on extensive experimental tests performed upon it. Operating DesaLink using compressed air as power supply under laboratory conditions, a freshwater production of approximately 300 litres per day was recorded with a concentration of around 350 ppm, whilst the feed water had a concentration range of 2500–4500 ppm; the corresponding linkage efficiency was around 40%. In the computational aspect, simulation models have been developed and validated for each of the subsystems of DesaLink, upon which an integrated model has been realised for the whole system. The models, both the subsystem ones and the integrated one, have been demonstrated to predict accurately the system performance under specific operational conditions. A simulation case study has been performed using the developed model. Simulation results indicate that the system can be expected to achieve a water production of 200 m3 per year by using a widely available evacuated tube solar collector having an area of only 2 m2. This freshwater production would satisfy the drinking water needs of 163 habitants in the Rajasthan region, the area for which the case study was performed.

From 3LSP (Third Party Logistics Service Provider) to 4LSP (Fourth Party Logistics Service Provider):a case study from Ireland

Increased competition, geographically expanded marketplaces, technology replication and an ever discerning consumer base, are reasons why companies need to regularly reappraise their competencies in terms of activities and functions they perform themselves. Where viable alternatives exist, companies should consider outsourcing of non-core activities and functions. Within SCM (Supply Chain Management) it could be preferable if a “one stop shop” existed for companies seeking to outsource functions identified as non-core. “Traditionally” structured LSP’s who have concentrated their service offer around providing warehousing and transport activities are potentially at a crossroads – clients and potential clients requiring “new” services which could increase LSP’s revenues if provided, whilst failure to provide could perhaps result in clients seeking outsourced services elsewhere.

Using a systems approach in logistics design and planning

The international economic and business environment continues to develop at a rapid rate. Increasing interactions between economies, particularly between Europe and Asia, has raised many important issues regarding transport infrastructure, logistics and broader supply chain management. The potential exists to further stimulate trade provided that these issues are addressed in a logical and systematic manner. However, if this potential is to be realised in practice there is a need to re-evaluate current supply chain configurations. A mismatch currently exists between the technological capability and the supply chain or logistical reality. This mismatch has sharpened the focus on the need for robust approaches to supply chain re-engineering. Traditional approaches to business re-engineering have been based on manufacturing systems engineering and business process management. A recognition that all companies exist as part of bigger supply chains has fundamentally changed the focus of re-engineering. Inefficiencies anywhere in a supply chain result in the chain as a whole being unable to reach its true competitive potential. This reality, combined with the potentially radical impact on business and supply chain architectures of the technologies associated with electronic business, requires organisations to adopt innovative approaches to supply chain analysis and re-design. This paper introduces a systems approach to supply chain re-engineering which is aimed at addressing the challenges which the evolving business environment brings with it. The approach, which is based on work with a variety of both conventional and electronic supply chains, comprises underpinning principles, a methodology and guidelines on good working practice, as well as a suite of tools and techniques. The adoption of approaches such as that outlined in this paper helps to ensure that robust supply chains are designed and implemented in practice. This facilitates an integrated approach, with involvement of all key stakeholders throughout the design process.

ICT adoption by logistics service providers:developing a learning agenda

Recent years have seen innovations in the logistics and freight transport industry in relation to Information and communication technologies (ICT) diffusion. The implementation of such technologies by third party logistics providers (3PLs) allows the real-time exchange of information between supply chain partners, thereby improving planning capability and customer service. However, the logistics and freight transport industry is lagging somewhat behind other sectors in ICT diffusion. In relation to the latter point, it is important to note that the dissemination of ICT in logistics and supply chain management (SCM) is shifting the 3PL industry to an increasingly knowledge-intensive approach. In this process, the role of learning becomes more central and an assessment of the impact of future ICT learning needs for the logistics providers is a strategic imperative. The aim of this paper is to assess the impact of ICT on logistics and freight transport industry in Italy and Ireland, and to identify learning needs for more effective ICT adoption in 3PLs.

The use of ICT by logistics service providers and implications for training needs:a cross-country perspective

Changes in the international economic scenario in recent years have made it necessary for both industrial and service firms to reformulate their strategies, with a strong focus on the resources required for successful implementation. In this scenario, information and communication technologies (ICT) has a potentially vital role to play both as a key resource for re-engineering business processes within a framework of direct connection between suppliers and customers, and as a source of cost optimisation. There have also been innovations in the logistics and freight transport industry in relation to ICT diffusion. The implementation of such systems by third party logistics providers (3PL) allows the real-time exchange of information between supply chain partners, thereby improving planning capability and customer service. Unlike other industries, the logistics and freight transport industry is lagging somewhat behind other sectors in ICT diffusion. This situation is to be attributed to a series of both industry-specific and other factors, such as: (a) traditional resistance to change on the part of transport and logistics service providers; (b) the small size of firms that places considerable constraints upon investment in ICT; (c) the relative shortage of user-friendly applications; (d) the diffusion of internal standards on the part of the main providers in the industry whose aim is to protect company information, preventing its dissemination among customers and suppliers; (e) the insufficient degree of professional skills for using such technologies on the part of staff in such firms. The latter point is of critical importance insofar as the adoption of ICT is making it increasingly necessary both to develop new technical skills to use different hardware and new software tools, and to be able to plan processes of communication so as to allow the optimal use of ICT. The aim of this paper is to assess the impact of ICT on transport and logistics industry and to highlight how the use of such new technologies is affecting providers' training needs. The first part will provide a conceptual framework of the impact of ICT on the transport and logistics industry. In the second part the state of ICT dissemination in the Italian and Irish third party logistics industry will be outlined. In the third part, the impact of ICT on the training needs of transport and logistics service providers - based on case studies in both countries - are discussed. The implications of the foregoing for the development of appropriate training policies are considered. For the covering abstract see ITRD E126595.

Multiple criteria optimization of contemporary logistics distribution network problems

In the contemporary customer-driven supply chain, maximization of customer service plays an equally important role as minimization of costs for a company to retain and increase its competitiveness. This article develops a multiple-criteria optimization approach, combining the analytic hierarchy process (AHP) and an integer linear programming (ILP) model, to aid the design of an optimal logistics distribution network. The proposed approach outperforms traditional cost-based optimization techniques because it considers both quantitative and qualitative factors and also aims at maximizing the benefits of deliverer and customers. In the approach, the AHP is used to determine the relative importance weightings or priorities of alternative warehouses with respect to some critical customer-oriented criteria. The results of AHP prioritization are utilized as the input of the ILP model, the objective of which is to select the best warehouses at the lowest possible cost. In this article, two commercial packages are used: including Expert Choice and LINDO.