Supply chain strategies for competitive manufacture

Few people would argue that there is one single solution to the design of a manufacturing supply chain. Relatively recent concepts such as strategic outsourcing and partnership sourcing are extremely valuable to some manufacturing organisations. This paper presents the findings of a comprehensive survey of manufacturing sourcing practices in the UK. This study has set out to understand current and intended practices that manufacturing companies have with their key suppliers, and also the decision processes and circumstances that have caused these relationships to occur.

Using min-sum loopy belief propagation for decentralised supply chain formation

Modern business trends such as agile manufacturing and virtual corporations require high levels of flexibility and responsiveness to consumer demand, and require the ability to quickly and efficiently select trading partners. Automated computational techniques for supply chain formation have the potential to provide significant advantages in terms of speed and efficiency over the traditional manual approach to partner selection. Automated supply chain formation is the process of determining the participants within a supply chain and the terms of the exchanges made between these participants. In this thesis we present an automated technique for supply chain formation based upon the min-sum loopy belief propagation algorithm (LBP). LBP is a decentralised and distributed message-passing algorithm which allows participants to share their beliefs about the optimal structure of the supply chain based upon their costs, capabilities and requirements. We propose a novel framework for the application of LBP to the existing state-of-the-art case of the decentralised supply chain formation problem, and extend this framework to allow for application to further novel and established problem cases. Specifically, the contributions made by this thesis are: • A novel framework to allow for the application of LBP to the decentralised supply chain formation scenario investigated using the current state-of-the-art approach. Our experimental analysis indicates that LBP is able to match or outperform this approach for the vast majority of problem instances tested. • A new solution goal for supply chain formation in which economically motivated producers aim to maximise their profits by intelligently altering their profit margins. We propose a rational pricing strategy that allows producers to earn significantly greater profits than a comparable LBP-based profitmaking approach. • An LBP-based framework which allows the algorithm to be used to solve supply chain formation problems in which goods are exchanged in multiple units, a first for a fully decentralised technique. As well as multiple-unit exchanges, we also model in this scenario realistic constraints such as factory capacities and input-to-output ratios. LBP continues to be able to match or outperform an extended version of the existing state-of-the-art approach in this scenario. • Introduction of a dynamic supply chain formation scenario in which participants are able to alter their properties or to enter or leave the process at any time. Our results suggest that LBP is able to deal easily with individual occurences of these alterations and that performance degrades gracefully when they occur in larger numbers.

Decentralised supply chain formation:a belief propagation-based approach

Decentralised supply chain formation involves determining the set of producers within a network able to supply goods to one or more consumers at the lowest cost. This problem is frequently tackled using auctions and negotiations. In this paper we show how it can be cast as an optimisation of a pairwise cost function. Optimising this class of functions is NP-hard but good approximations to the global minimum can be obtained using Loopy Belief Propagation (LBP). Here we detail a LBP-based approach to the supply chain formation problem, involving decentralised message-passing between potential participants. Our approach is evaluated against a well-known double-auction method and an optimal centralised technique, showing several improvements: it obtains better solutions for most networks that admit a competitive equilibrium Competitive equilibrium as defined in [3] is used as a means of classifying results on certain networks to allow for minor inefficiencies in their auction protocol and agent bidding strategies. while also solving problems where no competitive equilibrium exists, for which the double-auction method frequently produces inefficient solutions.

Exploring supply chain related graduate programmes in the UK:a view on their structure, content and approaches

Research in skill requirements needed by supply chain/logistics (SCL) managers has been published since the early nineties, however, research on what is really taught (e.g. curriculum, learning philosophies) by universities is scant. This paper's aim is to fill in this gap by analysing SCL graduate teaching in the UK. Data from 50 SCL MSc programmes were collected from 43 universities. Findings indicate that there seems to be a gap emerging between industry's needs and the content of the programmes being offered. This gap concerns employability, problem based learning, international business and the acquisition of softer interpersonal and problem solving skills.

A firm's capability to calibrate supply chain knowledge-antecedents and consequences

This paper proposes a conceptual model for a firm's capability to calibrate supply chain knowledge (CCK). Knowledge calibration is achieved when there is a match between managers' ex ante confidence in the accuracy of held knowledge and the ex post accuracy of that knowledge. Knowledge calibration is closely related to knowledge utility or willingness to use the available ex ante knowledge: a manager uses the ex ante knowledge if he/she is confident in the accuracy of that knowledge, and does not use it or uses it with reservation, when the confidence is low. Thus, knowledge calibration attained through the firm's CCK enables managers to deal with incomplete and uncertain information and enhances quality of decisions. In the supply chain context, although demand- and supply-related knowledge is available, supply chain inefficiencies, such as the bullwhip effect, remain. These issues may be caused not by a lack of knowledge but by a firm's lack of capability to sense potential disagreement between knowledge accuracy and confidence. Therefore, this paper contributes to the understanding of supply chain knowledge utilization by defining CCK and identifying a set of antecedents and consequences of CCK in the supply chain context.

Implementing collaborative practices in the healthcare supply chain:insights into hospital-vendor operations

The paper discusses the characteristics of healthcare supply chains, and puts particular emphasis on the implementation of VMI/CMI in this sector specific context. By the means of case study research the paper provides empirical data on the benefits of the above collaborative practices for both the hospital and vendors. The paper contributes to the stream of research on VMI/CMI in the healthcare sector, where limited research attempts have been conducted so far. In contrast to other surveys this case study shows that specific and measurable cost reductions exist, in addition to other improvements such as better control over the inventories, and also in reduction of administrative work. Results obtained may be also relevant to other hospitals and vendors and as they can form a basis for comparisons. Copyright © 2013 Inderscience Enterprises Ltd.

Experimenting with supply chain learning (SCL):supplier diversity and ethnic minority businesses

This paper reports on an innovative UK-based ‘Supply Chain Learning’ (SCL) initiative to encourage the corporate sector to consider supplier diversity in respect of ethnic minority businesses. This follows academic and policy interest in programmes to empower ethnic minority enterprises to achieve breakout to mainstream markets and business growth. The first phase of the initiative, entitled Supplier Development East Midlands (SDEM) is examined. By adopting an inter-organisational action learning approach, some of the key attributes of the programme are delineated, focusing on the recurrent action-reflection cycle taking place in a learning group comprising SDEM, LPOs (Large Purchasing Organisations) and small EMSs (Ethnic Minority Suppliers).

Decentralized supply chain formation using max-sum loopy belief propagation

Supply chain formation is the process by which a set of producers within a network determine the subset of these producers able to form a chain to supply goods to one or more consumers at the lowest cost. This problem has been tackled in a number of ways, including auctions, negotiations, and argumentation-based approaches. In this paper we show how this problem can be cast as an optimization of a pairwise cost function. Optimizing this class of energy functions is NP-hard but efficient approximations to the global minimum can be obtained using loopy belief propagation (LBP). Here we detail a max-sum LBP-based approach to the supply chain formation problem, involving decentralized message-passing between supply chain participants. Our approach is evaluated against a well-known decentralized double-auction method and an optimal centralized technique, showing several improvements on the auction method: it obtains better solutions for most network instances which allow for competitive equilibrium (Competitive equilibrium in Walsh and Wellman is a set of producer costs which permits a Pareto optimal state in which agents in the allocation receive non-negative surplus and agents not in the allocation would acquire non-positive surplus by participating in the supply chain) while also optimally solving problems where no competitive equilibrium exists, for which the double-auction method frequently produces inefficient solutions. © 2012 Wiley Periodicals, Inc.

Theoretical perspectives in purchasing and supply chain management:an analysis of the literature

Purpose – This paper attempts to seek answers to four questions. Two of these questions have been borrowed (but adapted) from the work of Defee et al.: RQ1. To what extent is theory used in purchasing and supply chain management (P&SCM) research? RQ2. What are the prevalent theories to be found in P&SCM research? Following on from these questions an additional question is posed: RQ3. Are theory-based papers more highly cited than papers with no theoretical foundation? Finally, drawing on the work of Harland et al., the authors have added a fourth question: RQ4. To what extent does P&SCM meet the tests of coherence, breadth and depth, and quality necessary to make it a scientific discipline? Design/methodology/approach – A systematic literature review was conducted in accordance with the model outlined by Tranfield et al. for three journals within the field of “purchasing and supply chain management”. In total 1,113 articles were reviewed. In addition a citation analysis was completed covering 806 articles in total. Findings – The headline features from the results suggest that nearly a decade-and-a-half on from its development, the field still lacks coherence. There is the absence of theory in much of the work and although theory-based articles achieved on average a higher number of citations than non-theoretical papers, there is no obvious contender as an emergent paradigm for the discipline. Furthermore, it is evident that P&SCM does not meet Fabian's test necessary to make it a scientific discipline and is still some way from being a normal science. Research limitations/implications – This study would have benefited from the analysis of further journals, however the analysis of 1,113 articles from three leading journals in the field of P&SCM was deemed sufficient in scope. In addition, a further significant line of enquiry to follow is the rigour vs relevance debate. Practical implications – This article is of interest to both an academic and practitioner audience as it highlights the use theories in P&SCM. Furthermore, this article raises a number of important questions. Should research in this area draw more heavily on theory and if so which theories are appropriate? Social implications – The broader social implications relate to the discussion of how a scientific discipline develops and builds on the work of Fabian and Amundson. Originality/value – The data set for this study is significant and builds on a number of previous literature reviews. This review is both greater in scope than previous reviews and is broader in its subject focus. In addition, the citation analysis (not previously conducted in any of the reviews) and statistical test highlights that theory-based articles are more highly cited than non-theoretically based papers. This could indicate that researchers are attempting to build on one another's work.