Evaluating approaches to product design and sourcing decisions in multinational companies

Product design and sourcing decisions are among the most difficult and important of all decisions facing multinational manufacturing companies, yet associated decision support and evaluation systems tend to be myopic in nature. Design for manufacture and assembly techniques, for example, generally focuses on manufacturing capability and ignores capacity although both should be considered. Similarly, most modelling and evaluation tools available to examine the performance of various solution and improvement techniques have a narrower scope than desired. A unique collaboration, funded by the US National Science Foundation, between researchers in the USA and the UK currently addresses these problems. This paper describes a technique known as Design For the Existing Environment (DFEE) and an holistic evaluation system based on enterprise simulation that was used to demonstrate the business benefits of DFEE applied in a simple product development and manufacturing case study. A project that will extend these techniques to evaluate global product sourcing strategies is described along with the practical difficulties of building an enterprise simulation on the scale and detail required.

Patterns of networking in the innovation process:a comparative study of the UK, Germany and Ireland

The research reported in this paper arose from collaboration with Brian Ashcroft (Fraser of Allander Institute, University of Strathclyde) and Stephen Roper (Northern Ireland Economic Research Centre, Queen's University of Belfast). The author is, however, solely responsible for the views expressed. The following sections are included: -Introduction -An Economics Perspective on Innovation Networks -The Product Development Survey -Discussion: Innovation, Networks and Institutions -Conclusions -References Read More: http://www.worldscientific.com/doi/abs/10.1142/9781848161481_0005

Is China's manufacturing sector becoming more high-tech? Evidence on shifts in comparative advantage, 1987-2005

Purpose – The paper assesses the extent to which China’s comparative advantage in manufacturing has shifted towards higher-tech sectors between 1987 and 2005 and proposes possible explanations for the shift. Design/methodology/approach – Revealed comparative advantage (RCA) indices for 27 product groups, representing high-, medium and low-tech sectors have been calculated. Examination of international market attractiveness complements the RCA analysis. Findings for selected sectors are evaluated in the context of other evidence. Findings – While China maintains its competitiveness in low-tech labour intensive products, it has gained RCA in selected medium-tech sectors (e.g. office machines and electric machinery) and the high-tech telecommunications and automatic data processing equipment sectors. Evidence from firm and sector specific studies suggests that improved comparative advantage in medium and high-tech sectors is based on capabilities developing through combining international technology transfer and learning. Research limitations/implications – The quantitative analysis does not explain the shifts in comparative advantage, though the paper suggests possible explanations. Further research at firm and sector levels is required to understand the underlying capability development of Chinese enterprises and the relative competitiveness of Chinese and foreign invested enterprises. Practical implications – Western companies should take account of capability development in China in forming their international manufacturing strategies. The rapid shifts in China’s comparative advantage have lessons for other industrialising countries. Originality/value – While RCA is a well-known methodology, its application at the disaggregated product group level combined with market attractiveness assessment is distinctive. The paper provides a broad assessment of changes in Chinese manufacturing as a basis for further research on capability development at firm and sector levels.

Development and application of an electronic-manufacturing selection framework for SMEs

With a wide diversity of available technologies, it is extremely problematic for SMEs to identify, plan, prioritize and use the correct strategy. Electronic-manufacturing has been evolving for some time, but currently an effective planning framework to assist managers with implementing electronic-manufacturing planning is still lacking. A framework, built around three elements: the Balanced Scorecard, Quality Function Deployment and Value Chain Analysis, is proposed here to assist SMEs in managing complexity in e-manufacturing planning. A case study, carried out in Singapore, demonstrates the practicality and utility of the framework in the context of a real business environment. © World Scientific Publishing Company.

Access to technological and financial resources for SME innovation

Editorial: The contributions to this special issue of the International Journal of Technology Management are all based on selected papers presented at the European Conference on Management of Technology held at Aston University, Birmingham, UK in June 1995. This conference was held on behalf of the International Association for Management of Technology (IAMOT) and was the first of the association’s major conferences to be held outside North America. The overall theme of the conference was ‘Technological Innovation and Global Challenges’. Altogether more than 130 papers were presented within four sub-themes and twenty seven topic sessions. This special issue draws on papers within five difference topic sessions: ‘Small firm linkages’; ‘The global company’; ‘New technology based firms’; ‘Financing innovation’; ‘Technology and development’. Together they cover a wide range of issues around the common question of accessing resources for innovation in small and medium sized enterprises. They present a global perspective on this important subject with authors from The Netherlands, Canada, USA, Ireland, France, Finland, Brazil and UK. A wide range of subjects are covered including the move away from public support for innovation, the role of alliances and networks, linkages to larger enterprises and the social implications associated with small enterprise innovation in developing countries.

Understanding the factors affecting e-business adoption and impact on logistics processes

Purpose: The purpose of this paper is to conceptualize e-business adoption and to generate understanding of the range of factors affecting the adoption process. The paper also aims at exploring the perceived impact of e-business adoption on logistics-related processes. Design/methodology/approach: Case study research, by conducting in-depth interviews in eight companies. Findings: E-business adoption is not exclusively a matter of resources. Increased e-business adoption and impact are caused by increased operational compatibility, as well as increased levels of collaboration. In terms of e-business impact this mainly refers to cycle time reductions and quality improvements, rather than direct cost reductions as reported by other authors. Research limitations/implications: The intrinsic weakness of the research method and the way concepts are operationalized limits the ability to generalize findings. Practical implications: Managers should emphasize developing their relationships with theirsuppliers/customers, in an effort to do common e-business investments, and should aim to increase their partners' commitment to the use of these applications. Originality/value: This paper provides empirical evidence from a sector where limited research efforts have taken place. Explanations can be helpful to other researchers involved in the understanding of the adoption of e-business and its impact. © Emerald Group Publishing Limited.

Quality risk in global supply network

Purpose - The rise of recent product recalls reveals that manufacturing firms are particularly vulnerable to product quality and safety where goods and materials have been sourced globally. The purpose of this paper is to explore the issues of quality and safety problems in global supply networks, and introduce a supply chain risk management (SCRM) framework to reduce the quality risk. Design/methodology/approach - A conceptual SCRM framework for mitigating quality risk is developed. In addition, four SCRM treatment practices are proposed by consolidating the empirical literature in the operations management and supply chain management areas. The general feasibility was discussed based on literature. Findings - The research has identified the root causes of the recent product recalls and a series of product harm scandals ranging from automobiles to unsafe toys. Supply chains are extended by outsourcing and stretched by globalization, which greatly increase the complexity of supply networks and decrease the visibility in risk and operation processes. Originality/value - The paper identifies four SCRM practices, and proposes two distinct antecedents that can prompt the effectiveness of SCRM. © 2011 Emerald Group Publishing Limited. All rights reserved.

Servitization within manufacturing:exploring the provision of advanced services and their impact on vertical integration

Purpose – The debate about services-led competitive strategies continues to grow, with much interest emerging around the differing practices between production and servitized operations. The purpose of this paper is to contribute to this discussion by investigating the vertical integration practice (in particular the micro-vertical integration, otherwise known as the supply chain position) of manufacturers who are successful in their adoption of servitization. Design/methodology/approach – To achieve this the authors have investigated a cross-section of four companies which are successfully delivering advanced services coupled to their products. Findings – Manufacturers who have embraced the servitization trend tend to retain capabilities in design and production, and do so because this benefits their speed, effectiveness and costs of supporting assets on advanced services contracts. Research limitations/implications – These are preliminary findings from a longer term research programme. Practical implications – Through this research note the authors seek to simultaneously contribute to the debate in the research community and offer guidance to practitioners exploring the consequences of servitization. Originality/value – Successful servitization demands that manufacturers adopt new and alternative practices and technologies to those traditionally associated with production operations. A prevailing challenge is to understand these differences and their underpinning rationale. Therefore, in this research note, the authors report on the practices of four case companies, explore the rationale underpinning these, and propose an hypothesis for the impact on vertical integration of successful servitization.

Building up resilience of construction sector SMEs and their supply chains to extreme weather events

Wider scientific community now accept that the threat of climate change as real and thus acknowledge the importance of implementing adaptation measures in a global context. In the UK , the physical effects of climate change are likely to be directly felt in the form of extreme weather events, which are predicted to escalate in number and severity in future under the changing climatic conditions. Construction industry; which consists of supply chains running across various other industries, economies and regions, will also be affected due to these events. Thus, it is important that the construction organisations are well prepared to withstand the effects of extreme weather events not only directly affecting their organisations but also affecting their supply chains which in turn might affect the organisation concerned. Given the fact that more than 99% of construction sector businesses are SMEs, the area can benefit significantly from policy making to improve SME resilience and coping capacity. This paper presents the literature review and synthesis of a doctoral research study undertaken to address the issue of extreme weather resilience of construction sector SMEs and their supply chains. The main contribution of the paper to both academia and practitioners is a synthesis model that conceptualises the factors that enhances resilience of SMEs and their supply chains against extreme weather events. This synthesis model forms the basis of a decision making framework that will enable SMEs to both reduce their vulnerability and enhance their coping capacity against extreme weather. The value of this paper is further extended by the overall research design that is set forth as the way forward.

The servitization of manufacturing:a review of literature and reflection on future challenges

Purpose – The purpose of this paper is to report the state-of-the-art of servitization by presenting a clinical review of literature currently available on the topic. The paper aims to define the servitization concept, report on its origin, features and drivers and give examples of its adoption along with future research challenges. Design/methodology/approach – In determining the scope of this study, the focus is on articles that are central and relevant to servitization within a wider manufacturing context. The methodology consists of identifying relevant publication databases, searching these using a wide range of key words and phrases associated with servitization, and then fully reviewing each article in turn. The key findings and their implications for research are all described. Findings – Servitization is the innovation of an organisation's capabilities and processes to shift from selling products to selling integrated products and services that deliver value in use. There are a diverse range of servitization examples in the literature. These tend to emphasize the potential to maintain revenue streams and improve profitability. Practical implications – Servitization does not represent a panacea for manufactures. However, it is a concept of significant potential value, providing routes for companies to move up the value chain and exploit higher value business activities. There is little work to date that can be used to help practitioners. Originality/value – This paper provides a useful review of servitization and a platform on which to base more in-depth research into the broader topic of service-led competitive strategy by drawing on the work from other related research communities.

Introduction : the role of quality, production and technological innovation in improving competitive performance

Quality, production and technological innovation management rank among the most important matters of concern to modern manufacturing organisations. They can provide companies with the decisive means of gaining a competitive advantage, especially within industries where there is an increasing similarity in product design and manufacturing processes. The papers in this special issue of International Journal of Technology Management have all been selected as examples of how aspects of quality, production and technological innovation can help to improve competitive performance. Most are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the theme was 'Getting Ahead Through Technology and People'. At the conference itself over 80 papers were presented by authors from 15 countries around the world. Among the many topics addressed within the conference theme, technological innovation, quality and production management emerged as attracting the greatest concern and interest of delegates, particularly those from industry. For any new initiative to be implemented successfully, it should be led from the top of the organization. Achieving the desired level of commitment from top management can, however, be a difficulty. In the first paper of this issue, Mackness investigates this question by explaining how systems thinking can help. In the systems approach, properties such as 'emergence', 'hierarchy', 'commnication' and 'control' are used to assist top managers in preparing for change. Mackness's paper is then complemented by Iijima and Hasegawa's contribution in which they investigate the development of Quality Information Management (QIM) in Japan. They present the idea of a Design Review and demonstrate how it can be used to trace and reduce quality-related losses. The next paper on the subject of quality is by Whittle and colleagues. It relates to total quality and the process of culture change within organisations. Using the findings of investigations carried out in a number of case study companies, they describe four generic models which have been identified as characterising methods of implementing total quality within existing organisation cultures. Boaden and Dale's paper also relates to the management of quality, but looks specifically at the construction industry where it has been found there is still some confusion over the role of Quality Assurance (QA) and Total Quality Management (TQM). They describe the results of a questionnaire survey of forty companies in the industry and compare them to similar work carried out in other industries. Szakonyi's contribution then completes this group of papers which all relate specifically to the question of quality. His concern is with the two ways in which R&D or engineering managers can work on improving quality. The first is by improving it in the laboratory, while the second is by working with other functions to improve quality in the company. The next group of papers in this issue all address aspects of production management. Umeda's paper proposes a new manufacturing-oriented simulation package for production management which provides important information for both design and operation of manufacturing systems. A simulation for production strategy in a Computer Integrated Manufacturing (CIM) environment is also discussed. This paper is then followed by a contribution by Tanaka and colleagues in which they consider loading schedules for manufacturing orders in a Material Requirements Planning (MRP) environment. They compare mathematical programming with a knowledge-based approach, and comment on their relative effectiveness for different practical situations. Engstrom and Medbo's paper then looks at a particular aspect of production system design, namely the question of devising group working arrangements for assembly with new product structures. Using the case of a Swedish vehicle assembly plant where long cycle assembly work has been adopted, they advocate the use of a generally applicable product structure which can be adapted to suit individual local conditions. In the last paper of this particular group, Tay considers how automation has affected the production efficiency in Singapore. Using data from ten major industries he identifies several factors which are positively correlated with efficiency, with capital intensity being of greatest interest to policy makers. The two following papers examine the case of electronic data interchange (EDI) as a means of improving the efficiency and quality of trading relationships. Banerjee and Banerjee consider a particular approach to material provisioning for production systems using orderless inventory replenishment. Using the example of a single supplier and multiple buyers they develop an analytical model which is applicable for the exchange of information between trading partners using EDI. They conclude that EDI-based inventory control can be attractive from economic as well as other standpoints and that the approach is consistent with and can be instrumental in moving towards just-in-time (JIT) inventory management. Slacker's complementary viewpoint on EDI is from the perspective of the quality relation-ship between the customer and supplier. Based on the experience of Lucas, a supplier within the automotive industry, he concludes that both banks and trading companies must take responsibility for the development of payment mechanisms which satisfy the requirements of quality trading. The three final papers of this issue relate to technological innovation and are all country based. Berman and Khalil report on a survey of US technological effectiveness in the global economy. The importance of education is supported in their conclusions, although it remains unclear to what extent the US government can play a wider role in promoting technological innovation and new industries. The role of technology in national development is taken up by Martinsons and Valdemars who examine the case of the former Soviet Union. The failure to successfully infuse technology into Soviet enterprises is seen as a factor in that country's demise, and it is anticipated that the newly liberalised economies will be able to encourage greater technological creativity. This point is then taken up in Perminov's concluding paper which looks in detail at Russia. Here a similar analysis is made of the concluding paper which looks in detail at Russia. Here a similar analysis is made of the Soviet Union's technological decline, but a development strategy is also presented within the context of the change from a centralised to a free market economy. The papers included in this special issue of the International Journal of Technology Management each represent a unique and particular contribution to their own specific area of concern. Together, however, they also argue or demonstrate the general improvements in competitive performance that can be achieved through the application of modern principles and practice to the management of quality, production and technological innovation.

A design and implementation methodology for high variety electronics assembly systems

Small indigenous manufacturers of electronic equipment are coming under increasingly severe pressure to adopt a strong defensive position against large multinational and Far Eastern companies. A common response to this threat has been for these firms to adopt a 'market driven' business strategy based on quality and customer service, rather than a 'technology led' strategy which uses technical specification and price to compete. To successfully implement this type of strategy there is a need for production systems to be redesigned to suit the new demands of marketing. Increased range and fast response require economy of scope rather t ban economy or scale while the organisation's culture must promote quality and process consciousness. This paper describes the 'Modular Assembly Cascade' concept which addresses these needs by applying the principles of flexible manufacturing (FMS) and just in time (,JlT) to electronics assembly. A methodology for executing the concept is also outlined. This is called DRAMA (Design Houtirw !'or· Adopting Modular Assembly).

Building a competitive advantage through sustainable operations strategy

This paper addresses an important gap in sustainability and technology management studies: the strategies for sustainable operations. Based on analysis of cases from automotive, textile, chemical, and food processing industries, the authors discuss the responses companies take to environmental and social pressures when aiming at increasing profitability. Our findings show that adaptations of traditional operations strategy frameworks can be useful when developing and assessing sustainability strategy for operations. Lastly, we also offer definitions for ‘sustainable operations strategy’ and ‘sustainable technology’ as those are not yet established in the literature. We consider the contribution of this article to be linked to the development and evaluation of sustainable operations strategies, which will invariably include the choice and use of technologies.