81 resultados para small- and medium-sized enterprises
Resumo:
Small and medium-sized enterprises (SMEs) are considered to be the driving engine for employment growth, source of innovation and technological progress. Moreover, the success of small exporters is critical for economic growth and is considered as an important development stage for many SMEs. However, their competitive advantage lies within the firm’s ability to innovate. This thesis contributes to the above literature by examining two main factors believed to promote firm growth namely ‘exporting’ and ‘innovation’ activities. Growing interests on the relationship between exporting, innovation and growth have recently been tackled. However, there remains a gap in literature on the relationship between exporting, innovation and firm growth for SMEs in emerging economies. Previous studies are conducted in developed counties such as UK, Ireland, USA, Germany, and Switzerland, which leaves the gap for those developing countries. Thus, this thesis addresses the gap by examining the importance of innovation and exporting activities in the growth of SMEs in Egypt. It is also the researcher’s intent to recognise the unique contribution of innovation on firm exporting activities covering all sectors. Egypt, one of the countries that were tremendously affected by the so-called ‘Arab Spring revolution’, is suffering from slow economic growth, high unemployment and poverty rate. Thus, the government must ensure economic growth and job creation. Programmes to encourage and develop SMEs should be part of inclusive growth strategy. Meanwhile, exporting is regarded as a key factor to help the economy recover from recession and stimulate economic growth. On the other hand, innovation leads to better performance in terms of growth, exporting and productivity. Therefore, SMEs and their exporting and innovation activities should be an integral part of any recovery and growth strategy for the economy. Moreover, Egypt is suffering from the so-called ‘Missing Middle’, which is problematic as medium firms tend to provide better employment growth and productivity. Therefore, more light is to shed on the importance of exporting and innovation in the growth of firms. The research design was quantitative in nature, testing the proposed hypotheses. The study was conducted in 2013 based on questionnaires of 406 Egyptians SMEs. The results of the empirical study suggest that both exporting and innovation activities are important in firm growth. However, the results show that, after controlling for endogeneity, innovation does not affect exporting activities in SMEs.
Resumo:
Access to external sources of technical knowledge is one of the keys to staying innovative for small and medium-sized enterprises (SMEs). The literature suggests that SMEs with a weak internal R&D capacity do not make much use of institutional sources like research institutes and universities. In this paper I investigate how trade associations can induce member SMEs to use a research institute. The case of a public research institute and SMEs in the textile industry in Kyoto, Japan is examined. Evidence from the case suggests that trade associations facilitate the use of the institute by expressing a collective `voice' to the management of the institute. The effect is evident among active members in the use of services involving a large information gap as to their benefits. I also consider a shortcoming of the collective approach and suggest some measures to be taken on the part of research institutes.
Resumo:
This exploratory paper, developing a conceptual model of owner-manager characteristics and access to finance, aims to investigate whether the concept of strategic groups plays a role in the process of small and medium-sized enterprises (SMEs) accessing finance. Strategic groups are groups of firms making similar patterns of investments in order to achieve their goals. This paper explores how strategic groups, which represent a classification of SMEs based upon their realised strategies, helps to provide an understanding of the success of SMEs in raising finance. The data, from a representative survey of 400 SMEs conducted by the Barclays Bank Telephone Research Unit, were subject to two-stage cluster analysis, thus codified into strategic groups using the natural rhythm of the data, rather than any subjective and value-laden categories being imposed by the authors. The findings show clear differentiation between strategic groups of SMEs, the characteristics of their owner-managers, and the financing strategies adopted. As such, the paper develops a novel typology of strategic groups of SMEs which, therefore, informs their financing strategies, as well as advising other stakeholders.
Resumo:
Determining an appropriate research methodology is considered as an important element in a research study; especially in a doctoral research study. It involves approach to the entire process of a research study, starting from theoretical underpinnings and spanning to data collection and analysis, and extending to developing the solutions for the problems investigated. Research methodology in essence is focused around the problems to be investigated in a research study and therefore varies according to the problems investigated. Thus, identifying the research methodology that best suits a research in hand is important, not only as it will benefit achieving the set objectives of a research, but also as it will serve establishing the credibility of the work. Research philosophy, approach, strategy, choice, and techniques are inherent components of the methodology. Research strategy provides the overall direction of the research including the process by which the research is conducted. Case study, experiment, survey, action research, grounded theory and ethnography are examples for such research strategies. Case study is documented as an empirical inquiry that investigates a contemporary phenomenon within its real-life context, especially when the boundaries between phenomenon and context are not clearly evident. Case study was adopted as the overarching research strategy, in a doctoral study developed to investigate the resilience of construction Small and Medium-sized Enterprises (SMEs) in the UK to extreme weather events. The research sought to investigate how construction SMEs are affected by EWEs, respond to the risk of EWEs, and means of enhancing their resilience to future EWEs. It is argued that utilising case study strategy will benefit the research study, in achieving the set objectives of the research and answering the research questions raised, by comparing and contrasting with the alternative strategies available. It is also claimed that the selected strategy will contribute towards addressing the call for improved methodological pluralism in construction management research, enhancing the understanding of complex network of relationships pertinent to the industry and the phenomenon being studied.
Resumo:
Improving the performance of private sector small and medium sized enterprises (SMEs) in a cost effective manner is a major concern for government. Governments have saved costs by moving information online rather than through more expensive face-to-face exchanges between advisers and clients. Building on previous work that distinguished between types of advice, this article evaluates whether these changes to delivery mechanisms affect the type of advice received. Using a multinomial logit model of 1334 cases of business advice to small firms collected in England, the study found that advice to improve capabilities was taken by smaller firms who were less likely to have limited liability or undertake business planning. SMEs sought word-of-mouth referrals before taking internal, capability-enhancing advice. This is also the case when that advice was part of a wider package of assistance involving both internal and external aspects. Only when firms took advice that used extant capabilities did they rely on the Internet. Therefore, when the Internet is privileged over face-to-face advice the changes made by each recipient of advice are likely to diminish causing less impact from advice within the economy. It implies that fewer firms will adopt the sorts of management practices that would improve their productivity. © 2014 Taylor & Francis.
Resumo:
Determining an appropriate research methodology is considered as an important element in a research study; especially in a doctoral research study. It involves approach to the entire process of a research study, starting from theoretical underpinnings and spanning to data collection and analysis, and extending to developing the solutions for the problems investigated. Research methodology in essence is focused around the problems to be investigated in a research study and therefore varies according to the problems investigated. Thus, identifying the research methodology that best suits a research in hand is important, not only as it will benefit achieving the set objectives of a research, but also as it will serve establishing the credibility of the work. Research philosophy, approach, strategy, choice, and techniques are inherent components of the methodology. Research strategy provides the overall direction of the research including the process by which the research is conducted. Case study, experiment, survey, action research, grounded theory and ethnography are examples for such research strategies. Case study is documented as an empirical inquiry that investigates a contemporary phenomenon within its real-life context, especially when the boundaries between phenomenon and context are not clearly evident. Case study was adopted as the overarching research strategy, in a doctoral study developed to investigate the resilience of construction Small and Medium-sized Enterprises (SMEs) in the UK to extreme weather events. The research sought to investigate how construction SMEs are affected by EWEs, respond to the risk of EWEs, and means of enhancing their resilience to future EWEs. It is argued that utilising case study strategy will benefit the research study, in achieving the set objectives of the research and answering the research questions raised, by comparing and contrasting with the alternative strategies available. It is also claimed that the selected strategy will contribute towards addressing the call for improved methodological pluralism in construction management research, enhancing the understanding of complex network of relationships pertinent to the industry and the phenomenon being studied.
Resumo:
Enhancing the resilience of local communities to weather extremes has gained significant interest over the years, amidst the increased intensity and frequency of such events. The fact that such weather extremes are forecast to further increase in number and severity in future has added extra weight to the importance of the issue. As a local community consists of a number of community groups such as households, businesses and policy makers, the actions of different community groups in combination will determine the resilience of the community as a whole. An important role has to be played by Small and Medium-sized Enterprises (SMEs); which is an integral segment of a local community in the UK, in this regard. While it is recognised that they are vital to the economy of a country and determines the prosperity of communities, they are increasingly vulnerable to effects of extreme weather. This paper discusses some of the exploratory studies conducted in the UK on SMEs and their ability to cope with extreme weather events, specifically flooding. Although a reasonable level of awareness of the risk was observed among the SMEs, this has not always resulted in increased preparedness even if they are located in areas at risk of flooding. The attitude and the motivation to change differed widely between SMEs. The paper presents schemas by which the SMEs can identify their vulnerability better so that they can be populated among a community of SMEs, which can be taken forward to inform policy making in this area. Therefore the main contribution the paper makes to the body of knowledge in the area is a novel way to communicate to SMEs on improving resilience against extreme weather, which will inform some of the policy making initiatives in the UK.
Resumo:
Recent policy changes in the UK encourage at-risk communities to learn to live with and adapt to flooding. Adaptation of individual properties by embracing resilient and resistant measures is an important aspect endorsed therein. Uptake of such protection measures by property owners, including that of Small and Medium-sized Enterprises (SMEs), has traditionally been low. A post-flood situation offers an opportunity to reinstate / reconstruct by integrating flood protection measures, in such a way that reduce damage and enhance the ability to recover in the event of a future flood incidence. In order to investigate the reinstatement / reconstruction experiences of flood affected SMEs, those affected by the 2009 Cockermouth flood event were studied. The results of a questionnaire survey revealed that many SMEs have opted for traditional reinstatement rather than resilient reinstatement. A detailed case study revealed requirements of getting the business back and running as soon as possible, a lack of guidance and advice from professionals and financial concerns as some of the barriers faced by SMEs. It is important that SMEs are provided with necessary guidance during the post-flood reinstatement stage, in order to make sure that the opportunity to build back better, integrating flood-protection measures is grasped by the SME owners. Stakeholders related to the construction industry, who are actively involved with post-flood reinstatement work, have an important role to play in this regard, providing necessary guidance and expertise to flooded SMEs.
Resumo:
Weather extremes have created a considerable impact on Small and Medium-sized Enterprises (SMEs) in the UK during the recent years, especially on SMEs in the construction sector. Evidence in relation to the recent weather extremes have demonstrated that SMEs are some of the worst impacted by the Extreme Weather Events (EWEs) and have confirmed them as a highly vulnerable section of the UK economy to the impact of extreme weather. This is of particular importance to the construction industry, as an overarching majority of construction companies are SMEs who account for the majority of employment and income generation within the industry. Whilst construction has been perceived as a sector significantly vulnerable to the impacts of EWEs, there is scant evidence of how construction SMEs respond to such events and cope with their impact. Based on the evidence emerged from case studies of construction SMEs, current coping strategies of construction SMEs were identified. Some of the strategies identified were focused at organisational level whereas others were focused at project level. Further, some of the strategies were general risk management / business continuity strategies whereas others have been specifically developed to address the risk of EWEs. Accordingly, coping strategies can be broadly categorised based on their focus; i.e. those focused at project or organisational level, and based on the risks that they seek to address; i.e. business / continuity risks in general or EWE risk specifically. By overlapping these two aspects; their focus and risks that they seek to address, four categories of coping strategies can be devised. There are; general risk management strategies focused at business level, general risk management strategies focused at project level, EWE specific strategies focused at business level, and EWE specific strategies focused at project level. It is proposed that for a construction SME to effectively cope with the impact of EWEs and develop their resilience against EWEs a rich mix of these coping strategies are required to suite the particular requirements of the business.
Resumo:
This report details research into the enforcement of intellectual property (IP). It considers the attitudes and practices of small and medium-sized enterprises (SMEs) and micro firms as well as the cost implications of the present IP enforcement system in the UK. According to an earlier report for SABIP, by Weatherall et al. 2009, in the Gowers Review of Intellectual Property questions of enforcement were largely addressed through assertion, rather than empirical research. This report aims to provide such research. Our study included both an online survey and a phone survey. These concentrated on SMEs and micro firms rather than being a comparative study with large firms. Further work obtained information on Patents and Registered Design cases listed for hearings in the Patents Court from 2003 to 2009. The analysis of this data provides some evidence that complements the results of the survey.
Resumo:
This report details research into the enforcement of intellectual property (IP). It considers the attitudes and practices of small and medium-sized enterprises (SMEs) and micro firms as well as the cost implications of the present IP enforcement system in the UK. According to an earlier report for SABIP, by Weatherall et al. 2009, in the Gowers Review of Intellectual Property questions of enforcement were largely addressed through assertion, rather than empirical research. This report aims to provide such research. Our study included both an online survey and a phone survey. These concentrated on SMEs and micro firms rather than being a comparative study with large firms. Further work obtained information on Patents and Registered Design cases listed for hearings in the Patents Court from 2003 to 2009. The analysis of this data provides some evidence that complements the results of the survey.
Resumo:
The UK has a relatively low ratio of business R&D to GDP (the BERD ratio) compared to other leading economies. There has also been a small decline in UK’s BERD ratio in the 1990s, whereas other leading economies have experienced small rises. The relatively low BERD ratio cannot be explained solely by sectoral or industry-level differences between the UK and other countries. There is, therefore, considerable interest in understanding the firm-level determinants of investment in R&D. This report was commissioned by the DTI to analyse the link between R&D and productivity for a sample of firms derived from merging the ONS’s Business Research and Development Database (BERD) and the Annual Respondents Database (ARD). The analysis estimates the private rates of returns to R&D, and not the social rates of return, since it is the private returns that should drive firms’ decisions. A key objective of this research is to analyse the productivity of R&D in small and medium sized enterprises (SME). The analysis is intended to allow comparisons to the results in Rogers (2005), which uses publicly available data on R&D in medium to large UK firms in the 1990s.
Resumo:
Vendor-managed inventory (VMI) is a widely used collaborative inventory management policy in which manufacturers manages the inventory of retailers and takes responsibility for making decisions related to the timing and extent of inventory replenishment. VMI partnerships help organisations to reduce demand variability, inventory holding and distribution costs. This study provides empirical evidence that significant economic benefits can be achieved with the use of a genetic algorithm (GA)-based decision support system (DSS) in a VMI supply chain. A two-stage serial supply chain in which retailers and their supplier are operating VMI in an uncertain demand environment is studied. Performance was measured in terms of cost, profit, stockouts and service levels. The results generated from GA-based model were compared to traditional alternatives. The study found that the GA-based approach outperformed traditional methods and its use can be economically justified in small- and medium-sized enterprises (SMEs).
Resumo:
Purpose Small and Medium-sized Enterprises (SMEs), which form a significant portion in many economies, are some of the most vulnerable to the impact of Extreme Weather Events (EWEs). This is of particular importance to the construction industry, as an overarching majority of construction companies are SMEs who account for the majority of employment and income generation within the industry. In the UK, previous research has identified construction SMEs as some of the worst affected by EWEs. Design/methodology/approach Given the recent occurrences of EWEs and predictions suggesting increases in both the intensity and frequency of EWEs in the future, improving the resilience of construction SMEs is vital for achieving a resilient construction industry. A conceptual framework is first developed which is then populated and expanded based on empirical evidence. Positioned within a pragmatic research philosophy, case study research strategy was adopted as the overall research strategy in undertaking this investigation. Findings Based on the findings of two in-depth case studies of construction SMEs, a framework was developed to represent EWE resilience of construction SMEs, where resilience was seen as a collective effect of vulnerability, coping strategies and coping capacities of SMEs, characteristics of the EWE and the wider economic climate. Originality/value The paper provides an original contribution towards the overarching agenda of the resilience of SMEs, and policy making in the area of EWE risk management by presenting a novel conceptual framework depicting the resilience of medium-sized construction companies.
Resumo:
The purpose of this research is to propose a procurement system across other disciplines and retrieved information with relevant parties so as to have a better co-ordination between supply and demand sides. This paper demonstrates how to analyze the data with an agent-based procurement system (APS) to re-engineer and improve the existing procurement process. The intelligence agents take the responsibility of searching the potential suppliers, negotiation with the short-listed suppliers and evaluating the performance of suppliers based on the selection criteria with mathematical model. Manufacturing firms and trading companies spend more than half of their sales dollar in the purchase of raw material and components. Efficient data collection with high accuracy is one of the key success factors to generate quality procurement which is to purchasing right material at right quality from right suppliers. In general, the enterprises spend a significant amount of resources on data collection and storage, but too little on facilitating data analysis and sharing. To validate the feasibility of the approach, a case study on a manufacturing small and medium-sized enterprise (SME) has been conducted. APS supports the data and information analyzing technique to facilitate the decision making such that the agent can enhance the negotiation and suppler evaluation efficiency by saving time and cost.