Teamwork for product innovation in Taiwanese family firms:an indigenous psychology perspective: An indigenous psychology

As the existing team literature mostly excludes context and culture, little is known about how these elements affect real-life team working (Engestrom, 2008; Salas & Wildman, 2009), and how teams work in non-Western settings, such as in Chinese firms (Phan, Zhou, & Abrahamson, 2010).This research addresses this issue by investigating how new product design (NPD) teams use team working to carry out product innovation in the context of Chinese family businesses (CFBs) via an indigenous psychology perspective. Unlike mainstream teamwork literature which mostly employs an etic design, an indigenous psychology perspective adopts an emic approach which places emphasis on understanding real-life phenomena in context through a cultural-insider perspective (Kim, 2000). Compatible with this theoretical position, a multiple qualitative case study approach was used as the research methodology. Three qualitative case studies were carried out in three longstanding family-run manufacturing firms in Taiwan, where family firms have been the pillars of high economic growth in the past five decades (W.-w. Chu, 2009). Two salient findings were established across the three case studies. First, the team processes identified across the three family firms are very similar with the exception of owners’ involvement and on-the-job training. All three family firms’ NPD teams are managed in a highly hierarchical manner, with considerable emphasis placed on hierarchical ranking, cost-effectiveness, efficiency, practicability, and interpersonal harmony. Second, new products developed by CFBNPD teams are mostly incremental innovation or copycat innovation, while radical or original products are rare. In many ways, CFBNPD teams may not be the ideal incubators for innovation. This is because several aspects of their unique context can cast constraints on how they work and innovate, and thus limit the ratio of radical innovation. A multi-level review into the facilitators and inhibitors of creativity or innovation in CFBNPD teams is provided. The theoretical and practical implications of the findings and the limitations of the study are also addressed.

Getting marketing back in the boardroom:understanding the drivers of marketing's influence within the firm

As many strategically important aspects of marketing are addressed by other functions in the organization, the decreased influence of the marketing department within companies is a topic of growing debate. In this study, the authors investigate this diminished influence and assess its determinants and consequences. They interviewed 25 marketing and finance executives from leading Dutch firms. They also conducted a large-scale Internet-based survey of several hundred marketing, finance, and general managers. Their results show that accountability and the innovativeness of the marketing department are the major drivers of the marketing department’s influence. They also demonstrate that a firm’s short-term orientation is negatively related to the influence of the marketing department. Marketing influence is positively related to market orientation, which is positively related to firm performance. Their results do not support prior findings of a direct positive link between marketing influence and firm performance, which might suggest that there is no need for a strong marketing department. The study suggests that an influential marketing department is relevant primarily when the firm is not market oriented. When firms are market oriented, a less influential marketing department does not lower their performance. Hence, it appears that they can choose to have an influential or noninfluential marketing department without any repercussions for their performance. Marketing activities could move to other functions. The authors suggest that marketing departments should aim to retain their influence. Dispersing marketing decision making among many functions can cause a lack of coordination; customers also lose their advocate within the firm. How can marketing departments regain their influence? The authors suggest two general solutions. First, marketing departments should become more accountable by linking marketing actions and policies with financial results. Marketers should become capable in analytics and finance. Second, they should become more innovative by increasing their share in new product or service concepts. They can do so by using their knowledge of the market and customers to contribute to new product or service development.

Introduction : the role of quality, production and technological innovation in improving competitive performance

Quality, production and technological innovation management rank among the most important matters of concern to modern manufacturing organisations. They can provide companies with the decisive means of gaining a competitive advantage, especially within industries where there is an increasing similarity in product design and manufacturing processes. The papers in this special issue of International Journal of Technology Management have all been selected as examples of how aspects of quality, production and technological innovation can help to improve competitive performance. Most are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the theme was 'Getting Ahead Through Technology and People'. At the conference itself over 80 papers were presented by authors from 15 countries around the world. Among the many topics addressed within the conference theme, technological innovation, quality and production management emerged as attracting the greatest concern and interest of delegates, particularly those from industry. For any new initiative to be implemented successfully, it should be led from the top of the organization. Achieving the desired level of commitment from top management can, however, be a difficulty. In the first paper of this issue, Mackness investigates this question by explaining how systems thinking can help. In the systems approach, properties such as 'emergence', 'hierarchy', 'commnication' and 'control' are used to assist top managers in preparing for change. Mackness's paper is then complemented by Iijima and Hasegawa's contribution in which they investigate the development of Quality Information Management (QIM) in Japan. They present the idea of a Design Review and demonstrate how it can be used to trace and reduce quality-related losses. The next paper on the subject of quality is by Whittle and colleagues. It relates to total quality and the process of culture change within organisations. Using the findings of investigations carried out in a number of case study companies, they describe four generic models which have been identified as characterising methods of implementing total quality within existing organisation cultures. Boaden and Dale's paper also relates to the management of quality, but looks specifically at the construction industry where it has been found there is still some confusion over the role of Quality Assurance (QA) and Total Quality Management (TQM). They describe the results of a questionnaire survey of forty companies in the industry and compare them to similar work carried out in other industries. Szakonyi's contribution then completes this group of papers which all relate specifically to the question of quality. His concern is with the two ways in which R&D or engineering managers can work on improving quality. The first is by improving it in the laboratory, while the second is by working with other functions to improve quality in the company. The next group of papers in this issue all address aspects of production management. Umeda's paper proposes a new manufacturing-oriented simulation package for production management which provides important information for both design and operation of manufacturing systems. A simulation for production strategy in a Computer Integrated Manufacturing (CIM) environment is also discussed. This paper is then followed by a contribution by Tanaka and colleagues in which they consider loading schedules for manufacturing orders in a Material Requirements Planning (MRP) environment. They compare mathematical programming with a knowledge-based approach, and comment on their relative effectiveness for different practical situations. Engstrom and Medbo's paper then looks at a particular aspect of production system design, namely the question of devising group working arrangements for assembly with new product structures. Using the case of a Swedish vehicle assembly plant where long cycle assembly work has been adopted, they advocate the use of a generally applicable product structure which can be adapted to suit individual local conditions. In the last paper of this particular group, Tay considers how automation has affected the production efficiency in Singapore. Using data from ten major industries he identifies several factors which are positively correlated with efficiency, with capital intensity being of greatest interest to policy makers. The two following papers examine the case of electronic data interchange (EDI) as a means of improving the efficiency and quality of trading relationships. Banerjee and Banerjee consider a particular approach to material provisioning for production systems using orderless inventory replenishment. Using the example of a single supplier and multiple buyers they develop an analytical model which is applicable for the exchange of information between trading partners using EDI. They conclude that EDI-based inventory control can be attractive from economic as well as other standpoints and that the approach is consistent with and can be instrumental in moving towards just-in-time (JIT) inventory management. Slacker's complementary viewpoint on EDI is from the perspective of the quality relation-ship between the customer and supplier. Based on the experience of Lucas, a supplier within the automotive industry, he concludes that both banks and trading companies must take responsibility for the development of payment mechanisms which satisfy the requirements of quality trading. The three final papers of this issue relate to technological innovation and are all country based. Berman and Khalil report on a survey of US technological effectiveness in the global economy. The importance of education is supported in their conclusions, although it remains unclear to what extent the US government can play a wider role in promoting technological innovation and new industries. The role of technology in national development is taken up by Martinsons and Valdemars who examine the case of the former Soviet Union. The failure to successfully infuse technology into Soviet enterprises is seen as a factor in that country's demise, and it is anticipated that the newly liberalised economies will be able to encourage greater technological creativity. This point is then taken up in Perminov's concluding paper which looks in detail at Russia. Here a similar analysis is made of the concluding paper which looks in detail at Russia. Here a similar analysis is made of the Soviet Union's technological decline, but a development strategy is also presented within the context of the change from a centralised to a free market economy. The papers included in this special issue of the International Journal of Technology Management each represent a unique and particular contribution to their own specific area of concern. Together, however, they also argue or demonstrate the general improvements in competitive performance that can be achieved through the application of modern principles and practice to the management of quality, production and technological innovation.

Surviving the global economic crisis in the automotive industry through sustainable supplier management

This chapter looks at how the current global economic crisis has impacted upon the global automotive industry from an operations and supply chain perspective. It presents an empirical and theoretical background to help long and short term planning for organisations experiencing adverse trading conditions. The empirical research study (conducted between 2004-07 primarily in Germany) revealed that organisations are able to make short term improvements to performance by reducing costs and making process and structural improvements, but in the long term the deeper rooted causes of the industry can in part only be dealt with by improving interfirm R&D collaborations based upon competencies rather than cost related issues. A new approach known as Collaborative Enterprise Governance is presented which supports the design and management of competitive sustainable enterprises; it consists of a data capture tool, a body of knowledge and a dynamic reference grid to show how many part-to-part company relationships can exist simultaneously to make up productprocess focused enterprises. Examples from the German automotive industry are given, impact upon the overall product development lifecycle and the implications for organisational strategists are discussed. © 2010 Nova Science Publishers, Inc. All rights reserved.

Frontline employees' collaboration in industrial service innovation:routes of co-creation's effects on new service performance

From a Service-Dominant Logic (S-DL) perspective, employees constitute operant resources that firms can draw to enhance the outcomes of innovation efforts. While research acknowledges that frontline employees (FLEs) constitute, through service encounters, a key interface for the transfer of valuable external knowledge into the firm, the range of potential benefits derived from FLE-driven innovation deserves more investigation. Using a sample of knowledge intensive business services firms (KIBS), this study examines how the collaboration with FLEs along the new service development (NSD) process, namely FLE co-creation, impacts on service innovation performance following two routes of different effects. Partial least squares structural equation modeling (PLS-SEM) results indicate that FLE co-creation benefits the NS success among FLEs and firm’s customers, the constituents of the resources route. FLE co-creation also has a positive effect on the NSD speed, which in turn enhances the NS quality. NSD speed and NS quality integrate the operational route, which proves to be the most effective path to impact the NS market performance. Accordingly, KIBS managers must value their FLEs as essential partners to achieve successful innovation from an internal and external perspective, and develop the appropriate mechanisms to guarantee their effective involvement along the NSD process.

The East-Central European new donors:mapping capacity building and remaining challenges

In the past decade, the East-Central European countries were provided significant external capacity building assistance to help their emergence as donors of foreign aid. This paper aims to map these capacity development programmes and identify where they have helped and what challenges remain for the new donors. The main conclusion is that although capacity building has been instrumental in building organisational structures, working procedures and training staff, deeper underlying problems such as low levels of financing, lacking political will, the need for visibility and low staff numbers continue to hinder the new international development policies. Copyright © 2013 John Wiley & Sons, Ltd.

Reliability modelling and verification of manufacturing processes based on process knowledge management

Reliability modelling and verification is indispensable in modern manufacturing, especially for product development risk reduction. Based on the discussion of the deficiencies of traditional reliability modelling methods for process reliability, a novel modelling method is presented herein that draws upon a knowledge network of process scenarios based on the analytic network process (ANP). An integration framework of manufacturing process reliability and product quality is presented together with a product development and reliability verification process. According to the roles of key characteristics (KCs) in manufacturing processes, KCs are organised into four clusters, that is, product KCs, material KCs, operation KCs and equipment KCs, which represent the process knowledge network of manufacturing processes. A mathematical model and algorithm is developed for calculating the reliability requirements of KCs with respect to different manufacturing process scenarios. A case study on valve-sleeve component manufacturing is provided as an application example of the new reliability modelling and verification procedure. This methodology is applied in the valve-sleeve component manufacturing processes to manage and deploy production resources.

Decision-making in product quality based on failure knowledge

Decision-making in product quality is an indispensable stage in product development, in order to reduce product development risk. Based on the identification of the deficiencies of quality function deployment (QFD) and failure modes and effects analysis (FMEA), a novel decision-making method is presented that draws upon a knowledge network of failure scenarios. An ontological expression of failure scenarios is presented together with a framework of failure knowledge network (FKN). According to the roles of quality characteristics (QCs) in failure processing, QCs are set into three categories namely perceptible QCs, restrictive QCs, and controllable QCs, which present the monitor targets, control targets and improvement targets respectively for quality management. A mathematical model and algorithms based on the analytic network process (ANP) is introduced for calculating the priority of QCs with respect to different development scenarios. A case study is provided according to the proposed decision-making procedure based on FKN. This methodology is applied in the propeller design process to solve the problem of prioritising QCs. This paper provides a practical approach for decision-making in product quality. Copyright © 2011 Inderscience Enterprises Ltd.

Guest editorial:special issue on digitial enterprise technology

Full text This Proceedings volume contains selected papers from the Fourth International CIRP-sponsored, Conference on Digital Enterprise Technology (DET2007), which was held at the University of Bath, UK, 19–21 September 2007. All selected papers have been suitably enhanced for publication in the Journal and have undergone full review. Digital enterprise technology (DET) is ‘the collection of systems and methods for the digital modelling and analysis of the global product development and realization process, in the context of lifecycle management.’ The principal aim of the DET concept is to provide a coherent context for the development and integration of the various digital technologies that underpin modern design and manufacturing. These technologies can be classified according to the following five key areas. 1. Distributed and collaborative design. 2. Process modelling and process planning. 3. Advanced factory design and modelling. 4. Physical-to-digital environment integrators–verification. 5. Enterprise integration technologies. This special issue is representative of the wide breadth of the DET concept including; a comprehensive review of digital engineering, design processes, digital modelling of machine tools, forming, robotics and machining processes, verification and metrology, and dynamic networks. It is particularly pleasing to see the development of metrology as a key aspect of modern manufacturing technology, linking design intent to process capability. The papers published herein will facilitate the exploration of new and evolving research concepts by the international research community and will influence the development of international standards for the application of DET technologies.

Measurement resource planning:a methodology that uses quality characteristics mapping

Integration of the measurement activity into the production process is an essential rule in digital enterprise technology, especially for large volume product manufacturing, such as aerospace, shipbuilding, power generation and automotive industries. Measurement resource planning is a structured method of selecting and deploying necessary measurement resources to implement quality aims of product development. In this research, a new mapping approach for measurement resource planning is proposed. Firstly, quality aims are identified in the form of a number of specifications and engineering requirements of one quality characteristics (QCs) at a specific stage of product life cycle, and also measurement systems are classified according to the attribute of QCs. Secondly, a matrix mapping approach for measurement resource planning is outlined together with an optimization algorithm for combination between quality aims and measurement systems. Finally, the proposed methodology has been studied in shipbuilding to solve the problem of measurement resource planning, by which the measurement resources are deployed to satisfy all the quality aims. © Springer-Verlag Berlin Heidelberg 2010.

Stimulating design reuse through automated coding

In designing new product the ability to retrieve drawings of existing components is important if costs are to be controlled by preventing unnecessary duplication if parts. Component coding and classification systems have been used successfully for these purposes but suffer from high operational costs and poor usability arising directly from the manual nature of the coding process itself. A new version of an existing coding system (CAMAC) has been developed to reduce costs by automatically coding engineering drawings. Usability is improved be supporting searches based on a drawing or sketch of the desired component. Test results from a database of several thousand drawings are presented.

Patterns of networking in the innovation process:a comparative study of the UK, Germany and Ireland

The research reported in this paper arose from collaboration with Brian Ashcroft (Fraser of Allander Institute, University of Strathclyde) and Stephen Roper (Northern Ireland Economic Research Centre, Queen's University of Belfast). The author is, however, solely responsible for the views expressed. The following sections are included: -Introduction -An Economics Perspective on Innovation Networks -The Product Development Survey -Discussion: Innovation, Networks and Institutions -Conclusions -References Read More: http://www.worldscientific.com/doi/abs/10.1142/9781848161481_0005

Process integration and improvement using systemic diagrams and a human-centred approach

If product cycle time reduction is the mission, and the multifunctional team is the means of achieving the mission, what then is the modus operandi by which this means is to accomplish its mission? This paper asserts that a preferred modus operandi for the multifunctional team is to adopt a process-oriented view of the manufacturing enterprise, and for this it needs the medium of a process map [16] The substance of this paper is a methodology which enables the creation of such maps Specific examples of process models drawn from the product develop ment life cycle are presented and described in order to support the methodology's integrity and value The specific deliverables we have so far obtained are a methodology for process capture and analysis, a collection of process models spanning the product development cycle, and, an engineering handbook which hosts these models and presents a computer-based means of navigating through these processes in order to allow users a better understanding of the nature of the business, their role in it, and why the job that they do benefits the work of the company We assert that this kind of thinking is the essence of concurrent engineering implementation, and further that the systemigram process models uniquely stim ulate and organise such thinking.

Macro-level change and micro-level effects:a twenty year perspective on changing grocery shopping behaviour in Britain

In this paper we summarise key elements of retail change in Britain over a twenty-year period. The time period is that covered by a funded study into long-term change in grocery shopping habits in Portsmouth, England. The major empirical findings—to which we briefly allude—are reported elsewhere: the present task is to assess the wider context underlying that change. For example, it has frequently been stated that retailing in the UK is not as competitive as in other leading economies. As a result, the issue of consumer choice has become increasingly important politically. Concerns over concentration in the industry, new format development and market definition have been expressed by local planners, competition regulators and consumer groups. Macro level changes over time have also created market inequality in consumer opportunities at a local level—hence our decision to attempt a local-level study. Situational factors affecting consumer experiences over time at the local level involve the changing store choice sets available to particular consumers. Using actual consumer experiences thus becomes a yardstick for assessing the practical effectiveness of policy making. The paper demonstrates that choice at local level is driven by store use and that different levels of provision reflect real choice at the local level. Macro-level policy and ‘one size fits all’ approaches to regulation, it is argued, do not reflect the changing reality of grocery shopping. Accordingly, arguments for a more local and regional approach to regulation are made.