Fluidized bed gasification of biomass

A fluidized bed process development unit of 0.8 m internal diameter was designed on basis of results obtained from a bench scale laboratory unit. For the scaling up empirical models from the literature were used. The process development unit and peripheral equipment were constructed, assembled and commissioned, and instruments were provided for data acquisition. The fluidization characteristics of the reactor were determined and were compared to the design data. An experimental programme was then carried out and mass and energy balances were made for all the runs. The results showed that the most important independent experimental parameter was the air factor, with an optimum at 0.3. The optimum higher heating value of the gas produced was 6.5 MJ/Nm3, while the thermal efficiency was 70%. Reasonably good agreement was found between the experimental results, theoretical results from a thermodynamic model and data from the literature. It was found that the attainment of steady state was very sensitive to a continuous and constant feedstock flowrate, since the slightest variation in feed flow resulted in fluctuations of the gas quality. On the basis of the results a set of empirical relationships was developed, which constitutes an empirical model for the prediction of the performance of fluidized bed gasifiers. This empirical model was supplemented by a design procedure by which fluidized bed gasifiers can be designed and constructed. The design procedure was then extended to cover feedstock feeding and gas cleaning in a conceptual design of a fluidized bed gasification facility. The conceptual design was finally used to perform an economic evaluation of a proposed gasification facility. The economics of this plant (retrofit application) were favourable.

Synthesis of novel cylic monomers for hydrogel polymers

The aim of the project was to synthesise hydrophilic derivatives of 1,2-dihydroxy-3,5-cyclohexadiene (DHCD) and to copolymerise these derivatives with 2-hydroxyethyl methacrylate (HEMA), to give a completely new range of hydrogel materials. It was thought that hydro gels incorporating hydrophilic derivatives of DHCD could have good mechanical properties and good water binding ability. A model compound for cis-DHCD was sought, as cis-DHCD was expensive and stable under only a narrow range of conditions. Catechol was found to be an excellent model for cis-DHCD, as 1H NMR spectroscopy indicated that both compounds contained eclipsed hydroxy groups and flat rings. A number of catechol derivatives were prepared in good yield, under non-acidic conditions at room temperature. The limited availabilty of cis-DHCD led to an investigation into synthesising hydrophilic derivatives of both cis and trans-DHCD indirectly. Hydrophobic derivatives were easily prepared by indirect routes, but it was found that hydrophilic derivatives were considerably more difficult to synthesise. A number of novel routes to both cis and trans-DHCD were also explored. Copolymerisation of diacetate, dimethylcarbonate and dipivalate derivatives of cis-DHCD with HEMA, to form a hitherto unknown group of hydrogels, is reported. Hydrogels containing these monomers showed significant improvements in both tensile strength and Youngs modulus, at both equivalent composition and water content, over the corresponding HEMA / styrene and HEMA / methyl methacrylate analogues. It was observed that derivatives of trans-DHCD polymerise with difficulty. 1H NMR studies indicated that both faces of the ring were shielded by the pendant groups thereby preventing efficient polymerisation of the trans monomers.

Organizational and textual structuring of radio news discourse in English and Arabic.

The present work studies the overall structuring of radio news discourse via investigating three metatextual/interactive functions: (1) Discourse Organizing Elements (DOEs), (2) Attribution and (3) Sentential and Nominal Background Information (SBI & NBI). An extended corpus of about 73,000 words from BBC and Radio Damascus news is used to study DOEs and a restricted corpus of 38,000 words for Attribution and S & NBI. A situational approach is adopted to assess the influence of factors such as medium and audience on these functions and their frequence. It is found that: (1) DOEs are organizational and their frequency is determined by length of text; (2) Attribution Function in accordance with the editor's strategy and its frequency is audience sensitive; and (3) BI provides background information and is determined by audience and news topics. Secondly, the salient grammatical elements in DOEs are discourse deictic demonstratives, address pronouns and nouns referring to `the news'. Attribution is realized in reporting/reported clauses, and BI in a sentence, a clause or a nominal group. Thirdly, DOEs establish a hierarchy of (1) news, (2) summary/expansion and (3) item: including topic introduction and details. While Attribution is generally, and SBI solely, a function of detailing, NBI and proper names are generally a function of summary and topic introduction. Being primarily addressed to audience and referring metatextually, the functions investigated support Sinclair's interactive and autonomous planes of discourse. They also shed light on the part(s) of the linguistic system which realize the metatextual/interactive function. Strictly, `discourse structure' inevitably involves a rank-scale; but news discourse also shows a convention of item `listing'. Hence only within the boundary of variety (ultimately interpreted across language and in its situation) can textual functions and discourse structure be studied. Finally, interlingual variety study provides invaluable insights into a level of translation that goes beyond matching grammatical systems or situational factors, an interpretive level which has to be described in linguistic analysis of translation data.

Linkages between ecocentric values and action in expert discourse: the case of genetically modified food in the UK

Attitudes towards the environment can be manifest in two broad categories, namely anthropocentric and ecocentric. The former regards nature as of value only insofar as it is useful to humanity, whereas the latter assigns intrinsic value to natural entities. Industrial society can be characterised as being dominated by anthropocentrism, which leads to the assumption that a majority of people hold anthropocentric values. However, research shows the most widely held values are ecocentric, which implies that many people's actions are at variance with their values. Furthermore, policy relating to environmental issues is predominantly anthropocentric, which implies it is failing to take account of the values of the majority. Research among experts involved in policy formulation has shown that their values, often ecocentric, are excluded from the policy process. The genetic modification of food can be categorised as anthropocentric, which implies that the technique is in conflict with widely held ecocentric values. This thesis examines data collected from interviews with individuals who have an influence on the debate surrounding the introduction of genetically modified foods, and can be considered 'experts'. Each interviewee is categorised according to whether their values and actions are ecocentric or anthropocentric, and the linkages between the two and the arguments used to justify their positions are explored. Particular emphasis is placed on interviewees who have ecocentric values but act professionally in an anthropocentric way. Finally, common themes are drawn out, and the features the arguments used by the interviewees have in common are outlined.

Differences in market-oriented behaviour levels across firms' domestic and export marketing operations:a study of antecedents and consequences

Researchers are beginning to recognise that organisations often have different levels of market orientation across different aspects of their operations. Focusing on firms involved in export marketing, this study examines how market-oriented behaviour differs across firms' domestic and export marketing operations. In this respect, the study is the first of its kind since it investigates three main issues: (1) to what extent do differences exist in firms' levels of market-oriented behaviour in their domestic markets (i.e., their domestic market-oriented behaviour) and in their export markets (i.e., their export market-oriented behaviour), (2) what are the key drivers of such differences, and (3) what are the performance implications for firms of having different levels of domestic and export market-oriented behaviour. To shed light on these research questions, data were collected from 225 British exporting firms using a mail questionnaire. Structural equation modelling techniques were used to develop and purify measures of all construct of interest, and to test the theoretical models developed. The results indicate that many of businesses sampled have very different levels of market orientation in their domestic and exporting operations: typically, firms tend to be more market-oriented in their domestic markets relative to their export markets. Several key factors were identified as drivers of differences in market orientation levels across firms' domestic and export markets. In particular, it was found that differences were more pronounced when: (i) interfunctional interactions between domestic marketing and export marketing are rare, (ii) when domestic and export marketing follow asymmetric business strategies, (iii) when mutual dependence between the functions is low, (iv) when one or other of the functions dominates the firm's sales, and (v) when there are pronounced differences in the degree to which the domestic and the export markets are experiencing environmental turbulence. The consequences of differences in market-oriented behaviour across firms' domestic and export markets were also studied. The results indicate that overall sales performance of firms (as determined by the composite of firms' domestic sales and export sales performance) is positively related to levels of domestic market-oriented behaviour under high levels of environmental turbulence in firms' domestic markets. However, as domestic market turbulence decreases, so to does the strength of this positive relationship. On the other hand, export market-oriented behaviour provides a positive contribution to firms' overall sales success under conditions of relatively low export market turbulence. As the turbulence in export markets increases, this positive relationship becomes weaker. These findings indicate that there are numerous situations in which it is sub-optimal for firms to have identical levels of market-oriented behaviour in their domestic and exporting operations. The theoretical and practical implications of these findings are discussed.

The human factors of automatic speech recognition in control room systems

This thesis addresses the viability of automatic speech recognition for control room systems; with careful system design, automatic speech recognition (ASR) devices can be useful means for human computer interaction in specific types of task. These tasks can be defined as complex verbal activities, such as command and control, and can be paired with spatial tasks, such as monitoring, without detriment. It is suggested that ASR use be confined to routine plant operation, as opposed the critical incidents, due to possible problems of stress on the operators' speech.  It is proposed that using ASR will require operators to adapt a commonly used skill to cater for a novel use of speech. Before using the ASR device, new operators will require some form of training. It is shown that a demonstration by an experienced user of the device can lead to superior performance than instructions. Thus, a relatively cheap and very efficient form of operator training can be supplied by demonstration by experienced ASR operators. From a series of studies into speech based interaction with computers, it is concluded that the interaction be designed to capitalise upon the tendency of operators to use short, succinct, task specific styles of speech. From studies comparing different types of feedback, it is concluded that operators be given screen based feedback, rather than auditory feedback, for control room operation. Feedback will take two forms: the use of the ASR device will require recognition feedback, which will be best supplied using text; the performance of a process control task will require task feedback integrated into the mimic display. This latter feedback can be either textual or symbolic, but it is suggested that symbolic feedback will be more beneficial. Related to both interaction style and feedback is the issue of handling recognition errors. These should be corrected by simple command repetition practices, rather than use error handling dialogues. This method of error correction is held to be non intrusive to primary command and control operations. This thesis also addresses some of the problems of user error in ASR use, and provides a number of recommendations for its reduction.

Control of antibiotic prescribing in UK NHS hosptials. Available in 2 volumes.

This thesis is an evaluation of practices to control antibiotic prescribing in UK NHS hospitals. Within the past ten years there has been increasing international concern about escalating antibiotic resistance, and the UK has issued several policy documents for pmdent antibiotic prescribing. Chief Pharmacists in 253 UK NHS hospitals were surveyed about the availability and nature of documents to control antibiotic prescribing (formularies, policies and guidelines), and the role of pharmacists and medical microbiologists in monitoring prescribers' compliance with the recommendations of such documents. Although 235 hospitals had at least one document, only 60% had both an antibiotic formulary and guidelines, and only about one-half planned an annual revision of document(s). Pharmacists were reported as mostly checking antibiotic prescribing on every ward whilst medical microbiologists mostly visited selected units only. Response to a similar questionnaire was obtained from the Chief Medical Microbiologists in 131 UK NHS hospitals. Comparisons of the questionnaires indicated areas of apparent disagreement about the roles of pharmacists and medical microbiologists. Eighty three paired-responses received from pharmacists and medical microbiologists in the same hospital revealed poor agreement and awareness about controls. A total of 205 institutional prescribing guidelines were analysed for recommendations for the empirical antibiotic prescribing of Community-Acquired Pneumonia (CAP). Variation was observed in recommendations and agreement with national guidance from the British Thoracic Society (BTS). A questionnaire was subsequently sent to 235 Chief Pharmacists to investigate their awareness of this new guidance from the BTS, and subsequent revision of institutional guidelines. Documents had been revised in only about one-half of hospitals where pharmacists were aware of the new guidance. An audit of empirical antibiotic prescribing practices for CAP was performed at one hospital. Although problems were experienced with retrieval of medical records, diagnostic criteria were poorly recorded, and only 57% of prescribing for non-severe CAP was compliant with institutional guidelines. A survey of clinicians at the same hospital identified that almost one-half used the institutional guidelines and most found them useful. However, areas for improvement concernmg awareness of the guidelines and ease of access were identified. It is important that hospitals are equipped to react to changes in the hospital environment including frequent movement of junior doctors between institutions, the employment of specialist "infectious diseases pharmacists" and the increasing benefits offered by information technology. Recommendations for policy have been suggested.

Generation of nitric oxide and its protective and toxic actions in the gastrointestinal tract

Nitric oxide is a free-radical gas which can exert both protective and damaging effects. The objectives of the thesis were: (i) to investigate arginine metabolism in isolated rat gastric mucosal cells, (ii) to investigate the role of NO in the induction of ornithine decarboxylase in the rat gastric mucosa damaged by hypertonic saline in vivo, (iii) to expose primary cultures of guinea-pig gastric mucosal cells to oxidative challenge and an NO donor, and to investigate the response in terms of heat shock protein 72 (HSP 72) induction, and (iv) to investigate the induction of iNOS and the role of potential modulators of activity in gastric cell lines. Isolated rat gastric mucosal cells converted exogenous arginine to ornithine and citrulline. This metabolism of arginine was not affected by a range of NO synthase inhibitors, but was reduced by the arginase inhibitors NG-hydroxy-L-arginine and L-ornithine. Thus, the predominant pathway of arginine metabolism involves arginase and ornithine transcarbamoylase, not NO synthase. Pretreatment of rats with NG-nitro-L-arginine promoted activation of ornithine decarboxylase after intragastric hypertonic saline, but did not increase acid phosphatase release (damage). NO may therefore restrict activation of ornithine decarboxylase in response to damage. Exposure of primary cultures of guinea-pig gastric mucosal cells to S-nitroso-N-acetyl-penicillamine (SNAP) caused a concentration dependent induction of HSP 72, which was inhibited by an NO scavenger and blockade of transcription. The effect of SNAP was enhanced by decreasing the intracellular reduced thiol content with diethyl maleate, which itself also induced HSP 72 formation. Substantial amounts of NO may induce defensive responses in cells. Induction of iNOS was not detected in HGT-1 or AGS cells exposed to cytokines. Conclusions An arginase pathway may restrict availability of arginine for NO synthase in gastric mucosa or may be present to supply ornithine for polyamine synthesis. NO may modulate the response to damage of the stomach epithelium in vivo. Exogenous NO may induce a defensive response in gastric mucosal cells.

Surface studies in ultra high vacuum

An ultra high vacuum system capable of attaining pressures of 10-12 mm Hg was used for thermal desorption experiments. The metal chosen for these experiments was tantalum because of its suitability for thermal desorption experiments and because relatively little work has been done using this metal. The gases investigated were carbon monoxide, hydrogen and ethylene. The kinetic and thermodynamic parameters relating to the desorption reaction were calculated and the values obtained related to the reaction on the surface. The thermal desorption reaction was not capable of supplying all the information necessary to form a complete picture of the desorption reaction. Further information was obtained by using a quadrupole mass spectrometer to analyse the desorbed species. The identification of the desorbed species combined with the value of the desorption parameters meant that possible adatom structures could be postulated. A combination of these two techniques proved to be a very powerful tool when investigating gas-metal surface reactions and gave realistic values for the measured parameters such as the surface coverage, order of reaction, the activation energy and pre-exponential function for desorption. Electron microscopy and X-ray diffraction were also used to investigate the effect of the gases on the metal surface.

Computer aided manufacturing of geometric models

As systems for computer-aided-design and production of mechanical parts have developed, there has arisen a need for techniques for the comprehensive description of the desired part, including its 3-D shape. The creation and manipulation of shapes is generally known as geometric modelling. It is desirable that links be established between geometric modellers and machining programs. Currently, unbounded APT and some bounded geometry systems are being widely used in manufacturing industry for machining operations such as: milling, drilling, boring and turning, applied mainly to engineering parts. APT systems, however, are presently only linked to wire-frame drafting systems. The combination of a geometric modeller and APT will provide a powerful manufacturing system for industry from the initial design right through part manufacture using NC machines. This thesis describes a recently developed interface (ROMAPT) between a bounded geometry modeller (ROMULUS) and an unbounded NC processor (APT). A new set of theoretical functions and practical algorithms for the computer aided manufacturing of 3D solid geometric model has been investigated. This work has led to the development of a sophisticated computer program, ROMAPT, which provides a new link between CAD (in form of a goemetric modeller ROMULUS) and CAM (in form of the APT NC system). ROMAPT has been used to machine some engineering prototypes successfully both in soft foam material and aluminium. It has been demonstrated above that the theory and algorithms developed by the author for the development of computer aided manufacturing of 3D solid modelling are both valid and applicable. ROMAPT allows the full potential of a solid geometric modeller (ROMULUS) to be further exploited for NC applications without requiring major investment in new NC processor. ROMAPT supports output in APT-AC, APT4 and the CAM-I SSRI NC languages.

A political economy of the ethnic chinese catering industry

The present political climate in which the ideals of entrepreneurship and self-help are strongly encouraged has drawn attention to those ethnic minorities noted for their entrepreneurial activity. Since the Chinese appear to be an exemplary case in point, this thesis focusses upon the historical material conditions which have led to the formation of a Chinese 'business* community in Britain, both past and present As such, it rejects the theories of cultural determinism which characterise most studies of the Chinese. For rather than representing the endurance of cultural norms, the existence of the contemporary Chinese 'niche' of ethnically exclusive firms in the catering industry is due to the conjunction of a number of historical processes. The first is the imperialist expansion into China of Britain's capitalist empire during the nineteenth century which established a relationship of dependency upon the interests of British capital by colonial Chinese labour. The second is the post war development of the catering industry and its demand for cheap labour as administered by the British state together with the contemporaneous development of the agricultural economy of colonial Hong Kong. Far from representing a source of material benefit to all, the ethnic Chinese 'niche' in catering is highly exploitative and merely underlines the racial oppression of Chinese in Britain. Attempts to promote business interests within the ethnic community therefore serve merely to entrench the structures of oppression.