User interface design support for the development of knowledge-based systems

The present scarcity of operational knowledge-based systems (KBS) has been attributed, in part, to an inadequate consideration shown to user interface design during development. From a human factors perspective the problem has stemmed from an overall lack of user-centred design principles. Consequently the integration of human factors principles and techniques is seen as a necessary and important precursor to ensuring the implementation of KBS which are useful to, and usable by, the end-users for whom they are intended. Focussing upon KBS work taking place within commercial and industrial environments, this research set out to assess both the extent to which human factors support was presently being utilised within development, and the future path for human factors integration. The assessment consisted of interviews conducted with a number of commercial and industrial organisations involved in KBS development; and a set of three detailed case studies of individual KBS projects. Two of the studies were carried out within a collaborative Alvey project, involving the Interdisciplinary Higher Degrees Scheme (IHD) at the University of Aston in Birmingham, BIS Applied Systems Ltd (BIS), and the British Steel Corporation. This project, which had provided the initial basis and funding for the research, was concerned with the application of KBS to the design of commercial data processing (DP) systems. The third study stemmed from involvement on a KBS project being carried out by the Technology Division of the Trustees Saving Bank Group plc. The preliminary research highlighted poor human factors integration. In particular, there was a lack of early consideration of end-user requirements definition and user-centred evaluation. Instead concentration was given to the construction of the knowledge base and prototype evaluation with the expert(s). In response to this identified problem, a set of methods was developed that was aimed at encouraging developers to consider user interface requirements early on in a project. These methods were then applied in the two further projects, and their uptake within the overall development process was monitored. Experience from the two studies demonstrated that early consideration of user interface requirements was both feasible, and instructive for guiding future development work. In particular, it was shown a user interface prototype could be used as a basis for capturing requirements at the functional (task) level, and at the interface dialogue level. Extrapolating from this experience, a KBS life-cycle model is proposed which incorporates user interface design (and within that, user evaluation) as a largely parallel, rather than subsequent, activity to knowledge base construction. Further to this, there is a discussion of several key elements which can be seen as inhibiting the integration of human factors within KBS development. These elements stem from characteristics of present KBS development practice; from constraints within the commercial and industrial development environments; and from the state of existing human factors support.

The role of manufacturing and market managers in strategy development:lessons from three companies

According to researchers and managers, there is a lack of agreement between marketing and manufacturing managers on critical strategic issues. However, most of the literature on the subject is anecdotal and little formal empirical research has been done. Three companies are investigated to study the extent of agreement/disagreement between manufacturing and marketing managers on strategy content and process. A novel method permits the study of agreement between the two different functional managers on the process of developing strategy. The findings consistently show that manufacturing managers operate under a wider range of strategic priorities than marketing managers, and that manufacturing managers participate less than marketing managers in the strategy development process. Further, both marketing and manufacturing managers show higher involvement in the strategy development process in the latter stages of the Hayes and Wheelwright four-stage model of manufacturing’s strategic role.

The innovation value chain in new technology-based firms:evidence from the U.K.

Innovation is central to the survival and growth of firms, and ultimately to the health of the economies of which they are part. A clear understanding both of the processes by which firms perform innovation and the benefits which flow from innovation in terms of productivity and growth is therefore essential. This paper demonstrates the use of a conceptual framework and modeling tool, the innovation value chain (IVC), and shows how the IVC approach helps to highlight strengths and weaknesses in the innovation performance of a key group of firms-new technology-based firms. The value of the IVC is demonstrated in showing the key interrelationships in the whole process of innovation from sourcing knowledge through product and process innovation to performance in terms of the growth and productivity outcomes of different types of innovation. The use of the IVC highlights key complementarities, such as that between internal R&D, external R&D, and other external sources of knowledge. Other important relationships are also highlighted. Skill resources matter throughout the IVC, being positively associated with external knowledge linkages and innovation success, and also having a direct influence on growth independent of the effect on innovation. A key benefit of the IVC approach is therefore its ability to highlight the roles of different factors at various stages of the knowledge-innovation-performance nexus, and to show their indirect as well as direct impact. This in turn permits both managerial and policy implications to be drawn. © 2012 Product Development & Management Association.

Capabilities and competitiveness of Chinese state owned manufacturing enterprises:what has been learned over 20 years and what remains to be learned

Technological capabilities in Chinese manufacturing have been transformed in the last three decades. However, the extent to which and how domestic market oriented state owned enterprises (SOEs) have developed their capabilities remain important questions. The East Asian latecomer model has been adapted to study six Chinese SOEs in the automotive, steel and machine tools sectors to assess capability levels attained and the role of external sources and internal efforts in developing them. All six enterprises demonstrate high competence in operating established technology, managing investment and making product and process improvements but differ in innovative capability. While the East Asian latecomer model in which linking, leveraging and learning explain technological capability development is relevant for the companies studied, it needs to be adapted for Chinese SOEs to take account of types of external links and leverage of enterprises, the role of government, enterprise level management motives and means of financing development.

Innovation in leadership development

In the light of the financial crisis and the radically changed conditions in the market place, international leadership development is facing new demands. The Danish-based International Leadership Institute Mannaz has researched the new conditions in collaboration with the Institute of Executive Development in the United States. The research, conducted in 2008 and 2009, combines, in an innovative way, quantitative and qualitative inputs, from both current and future perspectives, from some 111 senior Corporate Executives, Heads of Human Resources and of Learning and Organisational Development in large international corporations headquartered in Europe and the United States; together with the thoughts of some 50 experienced practitioners involved in executive coaching as well as in designing, developing and facilitating leadership development programmes. Also we include a section summarising the key findings from recently published research from other leadership development surveys. Conclusions reveal that the crisis has propelled a long-awaited decline of the traditional classroom-based educational approach to leadership development. Instead, effective leadership development is suggested to build on experiential learning approaches rooted in real life, real time and allowing for more immediate impact and providing for considerably higher relevance and motivation. Coaching, leaders teaching leaders, stretch assignments, action learning, peer networking, customer insights and selective use of technology are seen as important contributors to the leadership development process going forward.

Metaphor in translation:possibilities for process research

This paper explores potential benefits of closer interaction between metaphor studies and translation process research. It presents some developments within Translation Studies which make use of conceptual metaphor theory and illustrates some process research methods for investigating metaphors. The paper considers a number of methodological recommendations and argues that of greatest importance is the need to take full account of insights from metaphor studies and associated disciplines. Another important potential innovation is the use of a multilingual approach in respect of both product- and process-oriented studies in order to increase both the amount and generality of data available for analysis. Thirdly, it is important to extend and complement the current ST-oriented approach. The paper concludes by suggesting some options for triangulating data gathered through a combination of methods.

Learning from openness : the dynamics of breadth in external innovation linkages

We explore how openness in terms of external linkages generates learning effects, which enable firms to generate more innovation outputs from any given breadth of external linkages. Openness to external knowledge sources, whether through search activity or linkages to external partners in new product development, involves a process of interaction and information processing. Such activities are likely to be subject to a learning process, as firms learn which knowledge sources and collaborative linkages are most useful to their particular needs, and which partnerships are most effective in delivering innovation performance. Using panel data from Irish manufacturing plants, we find evidence of such learning effects: establishments with substantial experience of external collaborations in previous periods derive more innovation output from openness in the current period. © 2013 The Authors. Strategic Management Journal published by John Wiley & Sons Ltd.

Information systems, inter-functional collaboration and innovation in Taiwanese high-tech manufacturing firms

This article investigates whether (1) cross-functional integration within a firm and the use of information systems (IS) that support information sharing with external parties can enhance integration across the supply chain and wider networks and (2) whether collaboration with customers, suppliers and other external parties leads to increased supply chain performance in terms of new product development and introduction of new processes. Data from a high-quality survey carried out in Taiwan in 2009 were used, and appropriate econometric models were applied. Results show that the adoption of IS that enhance information sharing is vital not only for the effective communication with suppliers and with wider network members, but their adoption also has a direct effect across a firm's innovative effort. Cross-functional integration appears to matter only for the introduction of an innovative process. Collaboration with customers and suppliers affected a product's design and its overall features and functionality, respectively. © 2013 Copyright Taylor and Francis Group, LLC.

Surviving the global economic crisis in the automotive industry through sustainable supplier management

This chapter looks at how the current global economic crisis has impacted upon the global automotive industry from an operations and supply chain perspective. It presents an empirical and theoretical background to help long and short term planning for organisations experiencing adverse trading conditions. The empirical research study (conducted between 2004-07 primarily in Germany) revealed that organisations are able to make short term improvements to performance by reducing costs and making process and structural improvements, but in the long term the deeper rooted causes of the industry can in part only be dealt with by improving interfirm R&D collaborations based upon competencies rather than cost related issues. A new approach known as Collaborative Enterprise Governance is presented which supports the design and management of competitive sustainable enterprises; it consists of a data capture tool, a body of knowledge and a dynamic reference grid to show how many part-to-part company relationships can exist simultaneously to make up productprocess focused enterprises. Examples from the German automotive industry are given, impact upon the overall product development lifecycle and the implications for organisational strategists are discussed. © 2010 Nova Science Publishers, Inc. All rights reserved.

Learning from openness:the dynamics of breadth in external innovation linkages

We explore how openness in terms of external linkages generates learning effects, which enable firms to generate more innovation outputs from any given breadth of external linkages. Openness to external knowledge sources, whether through search activity or linkages to external partners in new product development, involves a process of interaction and information processing. Such activities are likely to be subject to a learning process, as firms learn which knowledge sources and collaborative linkages are most useful to their particular needs, and which partnerships are most effective in delivering innovation performance. Using panel data from Irish manufacturing plants, we find evidence of such learning effects: establishments with substantial experience of external collaborations in previous periods derive more innovation output from openness in the current period. © 2013 The Authors. Strategic Management Journal published by John Wiley & Sons Ltd.

The early career researcher's toolkit:translating tissue engineering, regenerative medicine and cell therapy products

Although the importance of translation for the development of tissue engineering, regenerative medicine and cell-based therapies is widely recognized, the process of translation is less well understood. This is particularly the case among some early career researchers who may not appreciate the intricacies of translational research or make decisions early in development which later hinders effective translation. Based on our own research and experiences as early career researchers involved in tissue engineering and regenerative medicine translation, we discuss common pitfalls associated with translational research, providing practical solutions and important considerations which will aid process and product development. Suggestions range from effective project management, consideration of key manufacturing, clinical and regulatory matters and means of exploiting research for successful commercialization.

A methodological evaluation and predictive in silico investigation into the multi-functionality of arginine in directly compressed tablets

The acceleration of solid dosage form product development can be facilitated by the inclusion of excipients that exhibit poly-/multi-functionality with reduction of the time invested in multiple excipient optimisations. Because active pharmaceutical ingredients (APIs) and tablet excipients present diverse densification behaviours upon compaction, the involvement of these different powders during compaction makes the compaction process very complicated. The aim of this study was to assess the macrometric characteristics and distribution of surface charges of two powders: indomethacin (IND) and arginine (ARG); and evaluate their impact on the densification properties of the two powders. Response surface modelling (RSM) was employed to predict the effect of two independent variables; Compression pressure (F) and ARG percentage (R) in binary mixtures on the properties of resultant tablets. The study looked at three responses namely; porosity (P), tensile strength (S) and disintegration time (T). Micrometric studies showed that IND had a higher charge density (net charge to mass ratio) when compared to ARG; nonetheless, ARG demonstrated good compaction properties with high plasticity (Y=28.01MPa). Therefore, ARG as filler to IND tablets was associated with better mechanical properties of the tablets (tablet tensile strength (σ) increased from 0.2±0.05N/mm2 to 2.85±0.36N/mm2 upon adding ARG at molar ratio of 8:1 to IND). Moreover, tablets' disintegration time was shortened to reach few seconds in some of the formulations. RSM revealed tablet porosity to be affected by both compression pressure and ARG ratio for IND/ARG physical mixtures (PMs). Conversely, the tensile strength (σ) and disintegration time (T) for the PMs were influenced by the compression pressure, ARG ratio and their interactive term (FR); and a strong correlation was observed between the experimental results and the predicted data for tablet porosity. This work provides clear evidence of the multi-functionality of ARG as filler, binder and disintegrant for directly compressed tablets.

Linking design and manufacturing domains via web-based and enterprise integration technologies

The manufacturing industry faces many challenges such as reducing time-to-market and cutting costs. In order to meet these increasing demands, effective methods are need to support the early product development stages by bridging the gap of communicating early design ideas and the evaluation of manufacturing performance. This paper introduces methods of linking design and manufacturing domains using disparate technologies. The combined technologies include knowledge management supporting for product lifecycle management systems, Enterprise Resource Planning (ERP) systems, aggregate process planning systems, workflow management and data exchange formats. A case study has been used to demonstrate the use of these technologies, illustrated by adding manufacturing knowledge to generate alternative early process plan which are in turn used by an ERP system to obtain and optimise a rough-cut capacity plan. Copyright © 2010 Inderscience Enterprises Ltd.

Guest editorial:special issue on digitial enterprise technology

Full text This Proceedings volume contains selected papers from the Fourth International CIRP-sponsored, Conference on Digital Enterprise Technology (DET2007), which was held at the University of Bath, UK, 19–21 September 2007. All selected papers have been suitably enhanced for publication in the Journal and have undergone full review. Digital enterprise technology (DET) is ‘the collection of systems and methods for the digital modelling and analysis of the global product development and realization process, in the context of lifecycle management.’ The principal aim of the DET concept is to provide a coherent context for the development and integration of the various digital technologies that underpin modern design and manufacturing. These technologies can be classified according to the following five key areas. 1. Distributed and collaborative design. 2. Process modelling and process planning. 3. Advanced factory design and modelling. 4. Physical-to-digital environment integrators–verification. 5. Enterprise integration technologies. This special issue is representative of the wide breadth of the DET concept including; a comprehensive review of digital engineering, design processes, digital modelling of machine tools, forming, robotics and machining processes, verification and metrology, and dynamic networks. It is particularly pleasing to see the development of metrology as a key aspect of modern manufacturing technology, linking design intent to process capability. The papers published herein will facilitate the exploration of new and evolving research concepts by the international research community and will influence the development of international standards for the application of DET technologies.