Competitive edge through operations management

A view has emerged within manufacturing and service organizations that the operations management function can hold the key to achieving competitive edge. This has recently been emphasized by the demands for greater variety and higher quality which must be set against a background of increasing cost of resources. As nations' trade barriers are progressively lowered and removed, so producers of goods and service products are becoming more exposed to competition that may come from virtually anywhere around the world. To simply survive in this climate many organizations have found it necessary to improve their manufacturing or service delivery systems. To become real ''winners'' some have adopted a strategic approach to operations and completely reviewed and restructured their approach to production system design and operations planning and control. The articles in this issue of the International journal of Operations & Production Management have been selected to illustrate current thinking and practice in relation to this situation. They are all based on papers presented to the Sixth International Conference of the Operations Management Association-UK which was held at Aston University in June 1991. The theme of the conference was "Achieving Competitive Edge" and authors from 15 countries around the world contributed to more than 80 presented papers. Within this special issue five topic areas are addressed with two articles relating to each. The topics are: strategic management of operations; managing change; production system design; production control; and service operations. Under strategic management of operations De Toni, Filippini and Forza propose a conceptual model which considers the performance of an operating system as a source of competitive advantage through the ''operation value chain'' of design, purchasing, production and distribution. Their model is set within the context of the tendency towards globalization. New's article is somewhat in contrast to the more fashionable literature on operations strategy. It challenges the validity of the current idea of ''world-class manufacturing'' and, instead, urges a reconsideration of the view that strategic ''trade-offs'' are necessary to achieve a competitive edge. The importance of managing change has for some time been recognized within the field of organization studies but its relevance in operations management is now being realized. Berger considers the use of "organization design", ''sociotechnical systems'' and change strategies and contrasts these with the more recent idea of the ''dialogue perspective''. A tentative model is suggested to improve the analysis of different strategies in a situation specific context. Neely and Wilson look at an essential prerequisite if change is to be effected in an efficient way, namely product goal congruence. Using a case study as its basis, their article suggests a method of measuring goal congruence as a means of identifying the extent to which key performance criteria relating to quality, time, cost and flexibility are understood within an organization. The two articles on production systems design represent important contributions to the debate on flexible production organization and autonomous group working. Rosander uses the results from cases to test the applicability of ''flow groups'' as the optimal way of organizing batch production. Schuring also examines cases to determine the reasons behind the adoption of ''autonomous work groups'' in The Netherlands and Sweden. Both these contributions help to provide a greater understanding of the production philosophies which have emerged as alternatives to more conventional systems -------for intermittent and continuous production. The production control articles are both concerned with the concepts of ''push'' and ''pull'' which are the two broad approaches to material planning and control. Hirakawa, Hoshino and Katayama have developed a hybrid model, suitable for multistage manufacturing processes, which combines the benefits of both systems. They discuss the theoretical arguments in support of the system and illustrate its performance with numerical studies. Slack and Correa's concern is with the flexibility characteristics of push and pull material planning and control systems. They use the case of two plants using the different systems to compare their performance within a number of predefined flexibility types. The two final contributions on service operations are complementary. The article by Voss really relates to manufacturing but examines the application of service industry concepts within the UK manufacturing sector. His studies in a number of companies support the idea of the ''service factory'' and offer a new perspective for manufacturing. Harvey's contribution by contrast, is concerned with the application of operations management principles in the delivery of professional services. Using the case of social-service provision in Canada, it demonstrates how concepts such as ''just-in-time'' can be used to improve service performance. The ten articles in this special issue of the journal address a wide range of issues and situations. Their common aspect is that, together, they demonstrate the extent to which competitiveness can be improved via the application of operations management concepts and techniques.

Technology adoption in small and medium-sized logistics providers

Purpose - The main aim of the research is to shed light on the role of information and communication technology (ICT) in the logistics innovation process of small and medium-sized third party logistics providers (3PLs). Design/methodology/approach - A triangulated research strategy was designed using a combination of quantitative and qualitative methods. The former involved the use of a questionnaire survey of small and medium-sized Italian 3PLs with 153 usable responses received. The latter comprised a series of focus groups and the use of seven case studies. Findings - There is a relatively low level of ICT expenditure with few companies adopting formal technology investment strategies. The findings highlight the strategic importance of supply chain integration for 3PLs with companies that have embarked on an expansion of their service portfolios showing a higher level of both ICT usage and information integration. Lack of technology skills in the workforce is a major constraint on ICT adoption. Given the proliferation of logistics-related ICT tools and applications in recent years it has been difficult for small and medium-sized 3PLs to select appropriate applications. Research limitations/implications - The paper provides practical guidelines to researchers in the effective use of mixed-methods research based on the concept of methodological triangulation. In particular, it shows how questionnaire surveys, focus groups and case study analysis can be used in combination to provide insights into multi-faceted supply chain phenomena. It also identifies several potentially fruitful avenues for future research in this specific field. Practical implications - The paper's findings provide useful guidance for practitioners on the effective adoption of ICT as part of the logistics innovation process. The findings also provide support for ICT vendors in the design of ICT solutions that are aligned to the needs of small 3PLs. Originality/value - There is currently a paucity of research into the drivers and inhibitors of ICT in the innovation processes of small and medium-sized 3PLs. This paper fills this gap by exploring the issue using a range of complementary research approaches. Copyright © 2013 Emerald Group Publishing Limited. All rights reserved.

Intellectual property asset management:how to identify, protect, manage and exploit intellectual property within the business environment

In the new ‘knowledge-intensive economies’ Intellectual assets increasingly play a key part on balance sheets. There is an increasing global awareness that in order to promote innovation and the growth of the economy, businesses must fully recognise and exploit their intellectual assets. A company’s ability to innovate rapidly and successfully is now regarded as essential and most breakthroughs are made by Small and Medium-sized Enterprises (SMEs), usually with no in-house legal professionals to help them. It is essential that those working with or creating intellectual property rights (IPR) are aware of the basics of Intellectual Property Law. Intellectual Property Asset Management provides business and management students at all levels with an accessible-straight-forward explanation of what the main Intellectual Property rights are and how these rights are protected. Locating the subject squarely in a business context and using case studies and examples throughout drawn from a wide range of business organisations, it explains how an organisation can exploit their rights through licensing, franchising and other means in order to make the best possible use of their IP assets. This book will provide students with: • the basic Intellectual Property law knowledge needed to identify a potential IP issue • the tools and understanding to assess an IP breach • the ability to identify where the problem cannot be solved in house and where expert legal assistance is required • the knowledge required to work effectively with lawyers and other legal professionals to achieve the desired outcome

Techonology usage in the supply chain:the case of small 3PLs

In today's supply chain management practices, a successful strategy depends increasingly on the performance of third party logistics (3PLs) providers as they play a key integrative role linking the different supply chain elements more effectively. Information and communications technology (ICT) has become an important element of 3PL competitive capability as it enables higher levels of supply chain integration. Recent industry developments have widened the technological gap between large and small 3PLs. This is critical particularly for those markets populated by a large number of small 3PLs such as the Italian logistics industry. The purpose of this paper is to provide an overview of ICT adoption in small logistics service providers. The focus of the study is the Italian 3PL market. The methodology adopted in this paper is based on the action research framework and it is a combination of theoretical analysis and empirical findings (focus groups and surveys). Firstly, a literature review on ICT dissemination in the international and Italian 3PL industry has been carried out. Then, a field survey has been developed preceded by two focus groups. The empirical investigation examined a sample of 153 small Italian 3PLs on the base of a definition and taxonomy proposed by the authors. The results provide a useful technological profile of the surveyed companies, as well as an analysis of the role of ICT in customising services and of the factors influencing ICT adoption. To give a more robust scientific justification of the survey results, it would be useful to carry out an additional large-scale analysis including other countries with a high presence of small logistics service companies. Furthermore, a complementary case-study analysis would be of help in defining the role of specific factors in different types of 3PL. Further investigations in this field are needed to better understand innovation paths, and how ICT can improve the competitive capabilities of 3PLs and of the wider supply chain. Managers of small 3PLs can use the findings to set-up guidelines for improving a company's technology innovation. Technology vendors can use the findings to better market their service/product into the small logistics service provider segment. Despite the fact that much has been written about the dissemination of ICT, there is still a shortage of research in the field of small 3PLs with little empirical investigation into the usage of ICT by small 3PLs. This paper provides a contribution to filling this void and suggests some possible research directions.

Supply network strategy:role and competence requirements

This paper presents an argument that it is possible for an organisation to manage networks, but understanding this involves consideration of what is meant by "managing". Based on prior research and data from a major longitudinal action research study in the health sector, the paper describes six network management roles: network structuring agent; co-ordinator; advisor; information broker; relationship broker; innovation sponsor. The necessary "assets" for effective performance of these roles are identified, in particular those relating to team competence. The findings enrich and significantly develop previous work on network management roles and activities, and their influencing factors. It is concluded that, given the specific nature of the networks studied, further research is required to evaluate the generalisability of the findings, though initial indications are promising.

Putting policy initiatives into practice:adopting an “honest broker” approach to adapting small businesses against flooding

Purpose: Amidst the current economic climate, which places many constraints on expensive flood defence schemes, the policy makers tend to favour schemes that are sympathetic to the needs of small and medium-sized enterprises (SMEs) and which promote empowering local communities based on their individual local contexts. Research has shown that although several initiatives are in place to create behavioural change among SMEs in undertaking adaptation approaches against flooding, they often tend to delay their responses by means of a "wait and see" attitude. The paper aims to discuss these issues. Design/methodology/approach: This paper argues that unless there are conscious efforts in the policy-making community to undertake explicit measures to engage with SMEs in a collaborative way, the uptake of adaptation measures will not be achieved as intended. With the use of the "honest broker" approach the paper provides a conceptual way forward of how a sense of collaboration can be instigated in an engagement process between the policy makers and SMEs, so that the scientific knowledge is translated in an appropriately rational way, which best meets the expectations of the SMEs. Findings: The paper proposes a conceptual model for engaging SMEs that will potentially increase the uptake of flood adaptation measures by SMEs. This could be a useful model with which to kick start a collaborative engagement process that could escalate to wider participation in other areas to improve impact of policy initiatives. Originality/value: The paper lays the conceptual foundation for a new theoretical base in the area, which will encourage more empirical investigations that will potentially enhance the practicality of some of the existing policies. © Emerald Group Publishing Limited.

Integrated logistics and supply chain management:the state of practice in Ireland

The Republic of Ireland and Northern Ireland were provided with aid to offset locational disadvantages in the run up to the Single European Market. Since then the Republic has emerged as the fastest growing member of the E.U. Success has not been underpinned by the transport system, suggesting that business has had to overcome locational disadvantages by strong performance elsewhere in the supply chain. The evidence indicates that there are Irish firms operating supply chain management techniques at a truly international standard. The problem is that there are so few in that category Meeting Ireland’s competitiveness challenge means closing the gap between the small group of large and foreign-owned firms, which display excellence in SCM, and the larger group of indigenous small and medium size businesses, which do not.

Regional competitiveness, economic growth and stages of development

This paper positions the concept of regional competitiveness within theories concerning regional economic growth and stages of economic development. It examines the sources of regional competitiveness encompassing an analysis based on the particular stage of economic development that the nations within which regions are situated have reached. As a means to achieve this, the paper undertakes an empirical analysis of data stemming from the World Competitiveness Index of Regions, and identifies regional competitiveness as a dual concept that explains relative differences in rates of economic development across regions, as well as an understanding of the future economic growth trajectories of regions at a similar stage of economic development. As with endogenous growth and development theory, the notion of regional competitiveness presented here places knowledge, innovation and entrepreneurship at the forefront of conceptualisations of regional economic differentiation.

Measurement of intervertebral cervical motion by means of dynamic X-ray image processing and data interpolation

Accurate measurement of intervertebral kinematics of the cervical spine can support the diagnosis of widespread diseases related to neck pain, such as chronic whiplash dysfunction, arthritis, and segmental degeneration. The natural inaccessibility of the spine, its complex anatomy, and the small range of motion only permit concise measurement in vivo. Low dose X-ray fluoroscopy allows time-continuous screening of cervical spine during patient's spontaneous motion. To obtain accurate motion measurements, each vertebra was tracked by means of image processing along a sequence of radiographic images. To obtain a time-continuous representation of motion and to reduce noise in the experimental data, smoothing spline interpolation was used. Estimation of intervertebral motion for cervical segments was obtained by processing patient's fluoroscopic sequence; intervertebral angle and displacement and the instantaneous centre of rotation were computed. The RMS value of fitting errors resulted in about 0.2 degree for rotation and 0.2 mm for displacements. © 2013 Paolo Bifulco et al.

modern foreign languages classroom:is inclusion of all exclusion in disguise?

The past decade has seen a drive to give all pupils the opportunity to study a Modern Foreign Language (MFL) in schools in England, making the teaching and learning of foreign languages part of the primary school curriculum. The Languages for All: Languages for Life (DfES, 2002) policy was introduced through the National Languages Strategy with an objective to increase the nation’s language capability. Raising the educational standard for all pupils is another government initiative with a strong emphasis on inclusion. As the Languages for All policy stresses the importance and benefits of language learning, and inclusion suggests equality and provision for all, this study examines the inclusion of all key stage 2 pupils in foreign language learning and describes perceptions and experiences of pupils, particularly those identified as having special educational needs (SEN) in their performances and negotiations in learning French. As a small scale, qualitative and ethnographically informed, this research is based on participant observation and semi-structured interviews with pupils, teachers of French, teaching assistants and parents. This study draws upon Nussbaum’s capabilities approach and Bourdieu’s concepts as theoretical foundations to analyse the ‘inclusive’ French classroom. As the capabilities approach takes people as ends not means, and goes beyond a focus on resources, it lends itself to critical thinking on issues around inclusion in education. In this context, this researcher investigates the experiences of pupils who struggle with foreign language learning because of their abilities or disabilities, and frames the discussion around the capabilities approach. The study also focuses on motivation and identity in foreign language learning, and draws upon Bourdieu’s concepts of capital, habitus and field to analyse how the participants make sense of and respond to their own circumstances in relation to their performances in the language learning process. This research thus considers Bourdieu’s concepts for a deeper understanding of issues of inequality in learning French and takes up Nussbaum’s insight that pupils may differ in what learning French means to them, and it is not how they differ, but the difference between their capability to choose and achieve what they value that should matter. The findings indicate that although, initially, the French classroom appears ‘inclusive’ due to the provision and practices of inclusion, a closer look shows it to be exclusionary. In addition, responses from the participants on the usefulness and benefits of foreign language learning are contradictory to the objectives of the Languages for All policy, illustrating the complexity of the ‘inclusive’ MFL classroom. This research concludes that structural and interpersonal practices of inclusion contribute to the disguising of exclusion in a classroom deemed ‘inclusive’. Implications are that an understanding and consideration of other aspect of life such as well-being, interests, needs and values should form a necessary part of the language policy.

Assembly accuracy analysis for small components with a planar surface in large-scale metrology

Large-scale mechanical products, such as aircraft and rockets, consist of large numbers of small components, which introduce additional difficulty for assembly accuracy and error estimation. Planar surfaces as key product characteristics are usually utilised for positioning small components in the assembly process. This paper focuses on assembly accuracy analysis of small components with planar surfaces in large-scale volume products. To evaluate the accuracy of the assembly system, an error propagation model for measurement error and fixture error is proposed, based on the assumption that all errors are normally distributed. In this model, the general coordinate vector is adopted to represent the position of the components. The error transmission functions are simplified into a linear model, and the coordinates of the reference points are composed by theoretical value and random error. The installation of a Head-Up Display is taken as an example to analyse the assembly error of small components based on the propagation model. The result shows that the final coordination accuracy is mainly determined by measurement error of the planar surface in small components. To reduce the uncertainty of the plane measurement, an evaluation index of measurement strategy is presented. This index reflects the distribution of the sampling point set and can be calculated by an inertia moment matrix. Finally, a practical application is introduced for validating the evaluation index.

Development of a technological innovation capability assessment model:a case study of manufacturing SMEs in Sialkot, Pakistan

Small and Medium Enterprises (SMEs) play an important part in the economy of any country. Initially, a flat management hierarchy, quick response to market changes and cost competitiveness were seen as the competitive characteristics of an SME. Recently, in developed economies, technological capabilities (TCs) management- managing existing and developing or assimilating new technological capabilities for continuous process and product innovations, has become important for both large organisations and SMEs to achieve sustained competitiveness. Therefore, various technological innovation capability (TIC) models have been developed at firm level to assess firms‘ innovation capability level. These models output help policy makers and firm managers to devise policies for deepening a firm‘s technical knowledge generation, acquisition and exploitation capabilities for sustained technological competitive edge. However, in developing countries TCs management is more of TCs upgrading: acquisitions of TCs from abroad, and then assimilating, innovating and exploiting them. Most of the TIC models for developing countries delineate the level of TIC required as firms move from the acquisition to innovative level. However, these models do not provide tools for assessing the existing level of TIC of a firm and various factors affecting TIC, to help practical interventions for TCs upgrading of firms for improved or new processes and products. Recently, the Government of Pakistan (GOP) has realised the importance of TCs upgrading in SMEs-especially export-oriented, for their sustained competitiveness. The GOP has launched various initiatives with local and foreign assistance to identify ways and means of upgrading local SMEs capabilities. This research targets this gap and developed a TICs assessment model for identifying the existing level of TIC of manufacturing SMEs existing in clusters in Sialkot, Pakistan. SME executives in three different export-oriented clusters at Sialkot were interviewed to analyse technological capabilities development initiatives (CDIs) taken by them to develop and upgrade their firms‘ TCs. Data analysed at CDI, firm, cluster and cross-cluster level first helped classify interviewed firms as leader, follower and reactor, with leader firms claiming to introduce mostly new CDIs to their cluster. Second, the data analysis displayed that mostly interviewed leader firms exhibited ‗learning by interacting‘ and ‗learning by training‘ capabilities for expertise acquisition from customers and international consultants. However, these leader firms did not show much evidence of learning by using, reverse engineering and R&D capabilities, which according to the extant literature are necessary for upgrading existing TIC level and thus TCs of firm for better value-added processes and products. The research results are supported by extant literature on Sialkot clusters. Thus, in sum, a TIC assessment model was developed in this research which qualitatively identified interviewed firms‘ TIC levels, the factors affecting them, and is validated by existing literature on interviewed Sialkot clusters. Further, the research gives policy level recommendations for TIC and thus TCs upgrading at firm and cluster level for targeting better value-added markets.