Business implications of manufacturing innovation : the experience of increasing automation in smaller to medium sized companies.

Despite the considerable potential of advanced manufacturing technologies (AMT) for improving the economic performance of many firms, a growing body of literature highlights many instances where realising this potential has proven to be a more difficult task than initially envisaged. Focussing upon the implementation of new manufacturing technologies in several smaller to medium sized enterprises (SME), the research examines the proposition that many of these problems can be attributed in part to inadequate consideration of the integrated nature of such technologies, where the effects of their implementation are not localised, but are felt throughout a business. The criteria for the economic evaluation of such technologies are seen as needing to reflect this, and the research develops an innovative methodology employing micro-computer based spreadsheets, to demonstrate how a series of financial models can be used to quantify the effects of new investments upon overall company performance. Case studies include: the development of a prototype machine based absorption costing system to assist in the evaluation of CNC machine tool purchases in a press making company; the economics and strategy of introducing a flexible manufacturing system for the production of ballscrews; and analysing the progressive introduction of computer based printing presses in a packaging and general print company. Complementary insights are also provided from discussion with the management of several other companies which have experienced technological change. The research was conducted as a collaborative CASE project in the Interdisciplinary Higher Degrees Scheme and was jointly funded by the SERC and Gaydon Technology Limited and later assisted by PE-Inbucon. The findings of the research shows that the introduction of new manufacturing technologies usually requires a fundamental rethink of the existing practices of a business. In particular, its implementation is seen as ideally needing to take place as part of a longer term business and manufacturing strategy, but that short term commercial pressures and limited resources often mean that firms experience difficulty in realising this. The use of a spreadsheet based methodology is shown to be of considerable assistance in evaluating new investments, and is seen as being the limit of sophistication that a smaller business is willing to employ. Several points for effective modelling practice are also given, together with an outline of the context in which a modelling approach is most applicable.

Setting parameters in MRP for the effective management of bought-out inventory in a JIT assembly environment

In recent years, UK industry has seen an explosive growth in the number of `Computer Aided Production Management' (CAPM) system installations. Of the many CAPM systems, materials requirement planning/manufacturing resource planning (MRP/MRPII) is the most widely implemented. Despite the huge investments in MRP systems, over 80 percent are said to have failed within 3 to 5 years of installation. Many people now assume that Just-In-Time (JIT) is the best manufacturing technique. However, those who have implemented JIT have found that it also has many problems. The author argues that the success of a manufacturing company will not be due to a system which complies with a single technique; but due to the integration of many techniques and the ability to make them complement each other in a specific manufacturing environment. This dissertation examines the potential for integrating MRP with JIT and Two-Bin systems to reduce operational costs involved in managing bought-out inventory. Within this framework it shows that controlling MRP is essential to facilitate the integrating process. The behaviour of MRP systems is dependent on the complex interactions between the numerous control parameters used. Methodologies/models are developed to set these parameters. The models are based on the Pareto principle. The idea is to use business targets to set a coherent set of parameters, which not only enables those business targets to be realised, but also facilitates JIT implementation. It illustrates this approach in the context of an actual manufacturing plant - IBM Havant. (IBM Havant is a high volume electronics assembly plant with the majority of the materials bought-out). The parameter setting models are applicable to control bought-out items in a wide range of industries and are not dependent on specific MRP software. The models have produced successful results in several companies and are now being developed as commercial products.

Trade unions and productivity:the impact of union presence on labour productivity in Korean manufacturing

This thesis examines the theoretical and empirical relationship between trade unions and productivity in the Korean auto and cement manufacturing industries, during the 1980s. It challenges the tenets of the existing debate by stressing the contingent nature of this relationship. In particular this thesis pinpoints inadequacies of econometric analysis as the only method of judging this association between union presence and productivity, because this ignores national and historical industrial relations contexts. Moreover, the polarity between positive and negative views of trade union influences on productivity is seen as needlessly limited, failing as it does to consider the full context of labour-management dynamics within the employment relationship. Empirically, this thesis focuses on the unionism and productivity during two contrasting political periods: the first a time of constraint on union action and the second a period of relative freedom. It examines these periods using a full range of quantitative and qualitative analysis. Of particular significant is the inclusion of attitude surveys of the relationship between the presence of unions and productivity conducted amongst workers, managers and trade union officials. The broad conclusion of the thesis is a rejection of the validity of continuing to examine the relationship between trade unions and productivity without locating this within national and historical industrial relations contexts.

The interaction between master production scheduling and detailed capacity requirements planning : closing the loop in manufacturing resource planning (MRPII) systems

The widespread implementation of Manufacturing Resource Planning (MRPII) systems in this country and abroad and the reported dissatisfaction with their use formed the initial basis of this piece of research which concentrates on the fundamental theory and design of the Closed Loop MRPII system itself. The dissertation concentrates on two key aspects namely; how Master Production Scheduling is carried out in differing business environments and how well the `closing of the loop' operates by checking the capcity requirements of the different levels of plans within an organisation. The main hypothesis which is tested is that in U.K. manufacturing industry, resource checks are either not being carried out satisfactorily or they are not being fed back to the appropriate plan in a timely fashion. The research methodology employed involved initial detailed investigations into Master Scheduling and capacity planning in eight diverse manufacturing companies. This was followed by a nationwide survey of users in 349 companies, a survey of all the major suppliers of Production Management software in the U.K. and an analysis of the facilities offered by current software packages. The main conclusion which is drawn is that the hypothesis is proved in the majority of companies in that only just over 50% of companies are attempting Resource and Capacity Planning and only 20% are successfully feeding back CRP information to `close the loop'. Various causative factors are put forward and remedies are suggested.

Aspects of the design and control of manufacturing systems subject to demand uncertainty

The recent explosive growth in advanced manufacturing technology (AMT) and continued development of sophisticated information technologies (IT) is expected to have a profound effect on the way we design and operate manufacturing businesses. Furthermore, the escalating capital requirements associated with these developments have significantly increased the level of risk associated with initial design, ongoing development and operation. This dissertation has examined the integration of two key sub-elements of the Computer Integrated Manufacturing (CIM) system, namely the manufacturing facility and the production control system. This research has concentrated on the interactions between production control (MRP) and an AMT based production facility. The disappointing performance of such systems has been discussed in the context of a number of potential technological and performance incompatibilities between these two elements. It was argued that the design and selection of operating policies for both is the key to successful integration. Furthermore, policy decisions are shown to play an important role in matching the performance of the total system to the demands of the marketplace. It is demonstrated that a holistic approach to policy design must be adopted if successful integration is to be achieved. It is shown that the complexity of the issues resulting from such an approach required the formulation of a structured design methodology. Such a methodology was subsequently developed and discussed. This combined a first principles approach to the behaviour of system elements with the specification of a detailed holistic model for use in the policy design environment. The methodology aimed to make full use of the `low inertia' characteristics of AMT, whilst adopting a JIT configuration of MRP and re-coupling the total system to the market demands. This dissertation discussed the application of the methodology to an industrial case study and the subsequent design of operational policies. Consequently a novel approach to production control resulted. A central feature of which was a move toward reduced manual intervention in the MRP processing and scheduling logic with increased human involvement and motivation in the management of work-flow on the shopfloor. Experimental results indicated that significant performance advantages would result from the adoption of the recommended policy set.

Computer integrated manufacturing control

Many manufacturing companies have long endured the problems associated with the presence of `islands of automation'. Due to rapid computerisation, `islands' such as Computer-Aided Design (CAD), Computer-Aided Manufacturing (CAM), Flexible Manufacturing Systems (FMS) and Material Requirement Planning (MRP), have emerged, and with a lack of co-ordination, often lead to inefficient performance of the overall system. The main objective of Computer-Integrated Manufacturing (CIM) technology is to form a cohesive network between these islands. Unfortunately, a commonly used approach - the centralised system approach, has imposed major technical constraints and design complication on development strategies. As a consequence, small companies have experienced difficulties in participating in CIM technology. The research described in this thesis has aimed to examine alternative approaches to CIM system design. Through research and experimentation, the cellular system approach, which has existed in the form of manufacturing layouts, has been found to simplify the complexity of an integrated manufacturing system, leading to better control and far higher system flexibility. Based on the cellular principle, some central management functions have also been distributed to smaller cells within the system. This concept is known, specifically, as distributed planning and control. Through the development of an embryo cellular CIM system, the influence of both the cellular principle and the distribution methodology have been evaluated. Based on the evidence obtained, it has been concluded that distributed planning and control methodology can greatly enhance cellular features within an integrated system. Both the cellular system approach and the distributed control concept will therefore make significant contributions to the design of future CIM systems, particularly systems designed with respect to small company requirements.

Computer integrated manufacturing (CIM) and the principle of business control

In response to the increasing international competitiveness, many manufacturing businesses are rethinking their management strategies and philosophies towards achieving a computer integrated environment. The explosive growth in Advanced Manufacturing Technology (AMI) has resulted in the formation of functional "Islands of Automation" such as Computer Aided Design (CAD), Computer Aided Manufacturing (CAM), Computer Aided Process Planning (CAPP) and Manufacturing Resources Planning (MRPII). This has resulted in an environment which has focussed areas of excellence and poor overall efficiency, co-ordination and control. The main role of Computer Integrated Manufacturing (CIM) is to integrate these islands of automation and develop a totally integrated and controlled environment. However, the various perceptions of CIM, although developing, remain focussed on a very narrow integration scope and have consequently resulted in mere linked islands of automation with little improvement in overall co-ordination and control. This thesis, that is the research described within, develops and examines a more holistic view of CIM, which is based on the integration of various business elements. One particular business element, namely control, has been shown to have a multi-facetted and underpinning relationship with the CIM philosophy. This relationship impacts various CIM system design aspects including the CIM business analysis and modelling technique, the specification of systems integration requirements, the CIM system architectural form and the degree of business redesign. The research findings show that fundamental changes to CIM system design are required; these are incorporated in a generic CIM design methodology. The affect and influence of this holistic view of CIM on a manufacturing business has been evaluated through various industrial case study applications. Based on the evidence obtained, it has been concluded that this holistic, control based approach to CIM can provide a greatly improved means of achieving a totally integrated and controlled business environment. This generic CIM methodology will therefore make a significant contribution to the planning, modelling, design and development of future CIM systems.

Some aspects of system design for production management in the rolling-mill industry

Case studies in copper-alloy rolling mill companies showed that existing planning systems suffer from numerous shortcomings. Where computerised systems are in use, these tend to simply emulate older manual systems and still rely heavily on modification by experienced planners on the shopfloor. As the size and number of orders increase, the task of process planners, while seeking to optimise the manufacturing objectives and keep within the production constraints, becomes extremely complicated because of the number of options for mixing or splitting the orders into batches. This thesis develops a modular approach to computerisation of the production management and planning functions. The full functional specification of each module is discussed, together with practical problems associated with their phased implementation. By adapting the Distributed Bill of Material concept from Material Requirements Planning (MRP) philosophy, the production routes generated by the planning system are broken down to identify the rolling stages required. Then to optimise the use of material at each rolling stage, the system generates an optimal cutting pattern using a new algorithm that produces practical solutions to the cutting stock problem. It is shown that the proposed system can be accommodated on a micro-computer, which brings it into the reach of typical companies in the copper-alloy rolling industry, where profit margins are traditionally low and the cost of widespread use of mainframe computers would be prohibitive.

Aspects of the design and operation of production control systems in manufacturing industry

Computerised production control developments have concentrated on Manufacturing Resources Planning (MRP II) systems. The literature suggests however, that despite the massive investment in hardware, software and management education, successful implementation of such systems in manufacturing industries has proved difficult. This thesis reviews the development of production planning and control systems, in particular, investigates the causes of failures in implementing MRP/MRP II systems in industrial environments and argues that the centralised and top-down planning structure, as well as the routine operational methodology of such systems, is inherently prone to failure. The thesis reviews the control benefits of cellular manufacturing systems but concludes that in more dynamic manufacturing environments, techniques such as Kanban are inappropriate. The basic shortcomings of MRP II systems are highlighted and a new enhanced operational methodology based on distributed planning and control principles is introduced. Distributed Manufacturing Resources Planning (DMRP), was developed as a capacity sensitive production planning and control solution for cellular manufacturing environments. The system utilises cell based, independently operated MRP II systems, integrated into a plant-wide control system through a Local Area Network. The potential benefits of adopting the system in industrial environments is discussed and the results of computer simulation experiments to compare the performance of the DMRP system against the conventional MRP II systems presented. DMRP methodology is shown to offer significant potential advantages which include ease of implementation, cost effectiveness, capacity sensitivity, shorter manufacturing lead times, lower working in progress levels and improved customer service.

Organizational weaknesses of the Greek Manufacturing industry: a case study of footwear

This thesis is concerned with those factors influencing the present performance of Greek manufacturing industry and the ways in which improvements could be realized after Greece joins European Communities..Detailed examination is made of the Greek footwear industry and its problems as the country emerges from a semi developed state to a position approaching parity with Western European countries. Particular attention is paid to the technology employed, capital deployment, industrial structure and managerial performance. In order to illustrate the path of development of the Greek footwear industry a comparison is undertaken with the British footwear industry which has a longer history and has employed larger scale methods since the 19th century. This comparison illustrates the opportunities and pitfalls likely to face the Greek industry in coming years. One section of the thesis is also concerned with trading relationships between the U.K. and Greece and identifies the market opportunities available to Greek industrialists. A detailed analysis is undertaken of the available secondary sources of information particularly official statistical data relating to production, capital expenditure, imports and exports, employment and consumption. Use is also made of various surveys of trade and production in footwear undertaken by trade associations and other bodies. The field research study has been largely directed towards practicing managers in companies of various size and is concerned with exposing standards of management and of relating efficiency to organization structure. The thesis is also concerned with the many wide issues affecting the development of manufacturing industry in Greece including the influence of social structure and social institutions, the values of modern Greek society and the complex organizational problems which Greece needs to overcome in order to take its place amongst the more established states of Europe.

Management and management education in a less developed economy: the case of Malawi

Malawi is seen as a society in transition, and as a consequence, it is argued, Malawian managers face particular problems where traditional and Western values intersect. The role of the Polytechnic of Malawi as a provider of management education in this environment is thus problematical. The thesis begins with a description of the Malawian business environment in its geographical, historical, political, cultural, economic and institutional forms, and then goes on to examine the problems practising managers themselves feel they face, and attempts to explain these problems in terms of the environmental factors described, and the environmental changes taking place. It is concluded, from the analysis conducted, that the environmental features discussed interact in a complex way to make Malawian managers averse to exercising initiative and taking decisions. The question of what the Polytechnic can do to help overcome this aversion is addressed. The field research was conducted in Malawi in the seven months January to July, 1980, during which time 207 questionnaires were administered to junior and middle managers working in all sectors of the economy at levels equivalent to Polytechnic graduate entry. In addition, a number of senior managers (both Malawian and expatriate) were interviewed, a case study was conducted in a manufacturing organisation, and a second questionnaire was administered to all business students at the Polytechnic. Extensive use of official statistics was also made where appropriate.

Nations and organizations:a comparative study of English and Indian work-related attitudes and values in matched manufacturing firms

This thesis reports a cross-national study carried out in England and India in an attempt to clarify the association of certain cultural and non-cultural characteristics with people's work-related attitudes and values, and with the structure of their work organizations. Three perspectives are considered to be relevant to the objectives of the study. The contingency perspective suggests that a 'fit' between an organization's context and its structural arrangements will be fundamentally necessary for achieving success and survival. The political economy perspective argues for the determining role of the social and economic structures within which the organization operates. The culturalist perspective looks to cultural attitudes and values of organizational members for an explanation for their organization's structure. The empirical investigation was carried out in three stages in each of the two countries involved by means of surveys of cultural attitudes, work-related attitudes and organizational structures and systems. The cultural surveys suggested that Indian and English people were different from one another with regard to fear of, and respect and obedience to, their seniors, ability to cope with ambiguity, honesty, independence, expression of emotions, fatalism, reserve, and care for others; they were similar with regard to tolerance, friendliness, attitude to change, attitude to law, self-control and self-confidence, and attitude to social differentiation. The second stage of the study, involving the employees of fourteen organizations, found that the English ones perceived themselves to have more power at work, expressed more tolerance for ambiguity, and had different expectations from their job than did the Indian equivalents. The two samples were similar with respect to commitment to their company and trust in their colleagues. The findings also suggested that employees' occupations, education and age had some influences on their work-related attitudes. The final stage of the research was a study of structures, control systems, and reward and punishment policies of the same fourteen organizations which were matched almost completely on their contextual factors across the two countries. English and Indian organizations were found to be similar in terms of centralization, specialization, chief executive's span of control, height and management control strategies. English organizations, however, were far more formalized, spent more time on consultation and their managers delegated authority lower down the hierarchy than Indian organizations. The major finding of the study was the multiple association that cultural, national and contingency factors had with the structural characteristics of the organizations and with the work-related attitudes of their members. On the basis of this finding, a multi-perspective model for understanding organizational structures and systems is proposed in which the contributions made by contingency, political economy and cultural perspectives are recognized and incorporated.

A comparison of U.S. and Japanese management systems and their transferability to Singapore industry

This research compares U.S. and Japanese management systems and evaluates their transferability to the Singaporean manufacturing industry. The objectives were:- a) To determine the effectiveness of U.S. and Japanese management systems when applied to Singapore. b) Determine the extent of transferability of U.S. and Japanese management systems to Singapore. c) Survey general problems ecountered in the application of U.S. and Japanese management systems to the Singapore industry. The study using questionnaire survey and interviews covered a total of eighty companies from four groups of firms in four industrial sectors comprising of U.S. and Japanese subsidiaries based in Singapore and their respective parent companies. Data from the questionnaires and interviews were used to investigate environmental conditions, management philosophy, management functions/practices, management effectiveness, and firm productivity. Two-way analysis of variance was used to analyse the questionnaire data. The analysis of the perceptual data from the questionnaire survey and interviews suggested that both U.S. and Japanese parent companies performed better in almost all the management variables studied when compared to their subsidiaries in Singapore. U.S. subsidiaries have less difficulty in adjusting to the Singapore environmental conditions and obtained better results than the Japanese subsidiaries in management functions/practices and management philosophy than the U.S. subsidiaries. In addition, the firm productivity (in terms of labour and capital productivity) of U.S. subsidiaries in Singapore was found to be higher than those of the Japanese subsidiaries. It was found that the Japanese parent companies returned the highest score among the four groups of firms in all the four industrial sectors for all the four management variables (i.e. environmental conditions, management philosophy, management functions/practices, and management effectiveness) surveyed using questionnaires. In contrast, the average score for Japanese subsidiaries in Singapore was generally the lowest among the four groups of firms. Thus the results of this study suggest that the transfer of U.S. management system into the Singapore industry is more successful than the Japanese management system. The problems encountered in the application of U.S. and Japanese management in Singapore were identified and discussed by the study. General recommendations for the Singaporean manufacturing industry were then made based on the findings of the questionnaire survey and interview analysis.

Virtual manufacturing:a study of some important issues relating to the transformation of traditional manufacturing organisations

This thesis starts with a literature review, outlining the major issues identified in the literature concerning virtual manufacturing enterprise (VME) transformation. Then it details the research methodology used – a systematic approach for empirical research. next, based on the conceptual framework proposed, this thesis builds three modules to form a reference model, with the purpose of clarifying the important issues relevant to transforming a traditional manufacturing company into a VME. The first module proposes a mechanism of VME transformation – operating along the VME metabolism. The second module builds a management function within a VME to ensure a proper operation of the mechanism. This function helps identify six areas as closely related to VME transformation: lean manufacturing; competency protection; internal operation performance measurement; alliance performance measurement; knowledge management; alliance decision making. The third module continues and proposes an alliance performance measurement system which includes 14 categories of performance indicators. An analysis template for alliance decision making is also proposed and integrated into the first module. To validate these three modules, 7 manufacturing organisations (5 in China and 2 in the UK) were investigated, and these field case studies are analysed in this thesis. The evidence found in these organisations, together with the evidence collected from the literature, including both researcher views and literature case studies, provide support for triangulation evidence. In addition, this thesis identifies the strength and weakness patterns of the manufacturing companies within the theoretical niche of this research, and clarifies the relationships among some major research areas from the perspective of virtual manufacturing. Finally, the research findings are summarised, as well as their theoretical and practical implications. Research limitations and recommendations for future work conclude this thesis.

Product innovation in a medium size mature manufacturing company

This thesis is concerned with the management of product innovation inside the medium size, mature, manufacturing company. An academic perspective of innovation is integrated with an account of direct participation acquired over a two year period. The emergent synthesis provides fresh insight into some of the problems associated with producing and sustaining innovation. Product innovation is a very complex activity, and it presents particular difficulties for mature industry. However, the ability to innovate is fundamental to a company's continued survival. Three aspects of product innovation are examined in detail. Firstly, is the requirement to separate innovation activity from the on-going business interests; dependency between the degree of separation and novelty is supported. Secondly, a simple sequential model of the innovation process is tested and shown to be of considerable practical value. Thirdly a relationship is established between the age of the recipient market and the type of innovation to be found in that market All three aspects are found to have important implications for management in their pursuit of innovation. Management deficiencies which inhibited the successful resolution of innovation-linked problems are described and solutions which stress the need for commitment and coherency are proposed. The long existing management structure in the mature company which mitigates against successful and continuing innovation are examined in detail and a strategy is evolved which uses the intrinsic strengths of the mature company to promote innovation of a kind compatible with success in the market. A set of guidelines of practical value is presented for those managers wishing to pursue, and sustain, product innovation in the medium size mature company.