Development of an electric heat pump for domestic use

This thesis records the design and development of an electrically driven, air to water, vapour compression heat pump of nominally 6kW heat output, for residential space heating. The study was carried out on behalf of GEC Research Ltd through the Interdisciplinary Higher Degrees Scheme at Aston University. A computer based mathematical model of the vapour compression cycle was produced as a design aid, to enable the effects of component design changes or variations in operating conditions to be predicted. This model is supported by performance testing of the major components, which revealed that improvements in the compressor isentropic efficiency offer the greatest potential for further increases in cycle COPh. The evaporator was designed from first principles, and is based on wire-wound heat transfer tubing. Two evaporators, of air side area 10.27 and 16.24m2, were tested in a temperature and humidity controlled environment, demonstrating that the benefits of the large coil are greater heat pump heat output and lower noise levels. A systematic study of frost growth rates suggested that this problem is most severe at the conditions of saturated air at 0oC combined with low condenser water temperature. A dynamic simulation model was developed to predict the in-service performance of the heat pump. This study confirmed the importance of an adequate radiator area for heat pump installations. A prototype heat pump was designed and manufactured, consisting of a hermetic reciprocating compressor, a coaxial tube condenser and a helically coiled evaporator, using Refrigerant 22. The prototype was field tested in a domestic environment for one and a half years. The installation included a comprehensive monitoring system. Initial problems were encountered with defrosting and compressor noise, both of which were solved. The unit then operated throughout the 1985/86 heating season without further attention, producing a COPh of 2.34.

Expatriate managers adjustment and its impact on subordinates reactions: a cross cultural leadership study of Kenya and Ethiopia

Research on culture, leadership and adjustment shows that societal culture influences leadership in such a way that it can impact on expatriate managers' effectiveness and adjustment in a new culture. In previous research, cultural background, personality, motives or behaviour of expatriate managers and their followers' reactions to them have been investigated in Europe, America and Asia. However, little attention has been paid on research on expatriate managers in African cultures especially in Eastern Africa. The present study represents an attempt to address the gap by examining how societal culture, leadership and adjustment success are interrelated for expatriate managers in Kenya and Ethiopia. Questionnaire data were obtained from a) local middle managers (N=160) for studying societal culture and leadership in Kenya and Ethiopia, b) expatriate managers in non-governmental organizations - NGOs (N=28) for studying expatriate managers' personality, motives and adjustment success and c) their immediate subordinates (N=125) for studying the expatriate managers' behaviours and their subordinates' reactions to them. Additionally, expatriate managers were interviewed and responses were coded for implicit motives, experiences and adjustment. SPSS was used to analyse data from questionnaires to obtain cultural and leadership dimensions, leader behaviour and subordinate reactions. The NVIVO computer based disclosure analysis package was used to analyse interview data. Findings indicate that societal culture influences leadership behaviours and leadership perceptions while the expatriate managers' motives, behaviours, personality and the cross cultural training they received prior to their assignment impact on the expatriates' adjustment success and on subordinates' reactions to them. The cultural fit between expatriate managers' home country (19 countries) and the target country (Kenya or Ethiopia) had no significant association with adjustment success but was positively related to expatriate behaviour and negatively associated with subordinates reactions. However, some particular societal practices - obviously adopted by expatriates and transferred to their target country - did predict subordinates' commitment, motivation and job satisfaction. Furthermore, expatriates' responsibility motivation was positively related to their adjustment success. Regarding leadership behaviours and effectiveness, expatriate' supportive behaviours predicted subordinates' job satisfaction most strongly. Expatriate managers expressing their management philosophies and experience shed light on the various aspects of adjustment and management of NGOs. In addition, review of Kenyan and Ethiopian cultures and the NGO context in these countries offers valuable information for expatriate managers. This study's general imphcation for Cross Cultural Management and lnternational Human Resources Management is that the combination of culture general and culture specific knowledge and reflections on Eastern Africa countries can inform senior management and international HR staff about the critical issue of what to include in training, coaching, and actual experience in a particular host country in order to ensure effective leadership. Furthennore, this knowledge is expected to influence expatriate managers' behaviour modification to enhance positive subordinate reactions. Questions about how to prepare expatriate managers and subordinates to work more competently and sensitively across cultures are addressed. Further theoretical implications, limitations of the study and directions for future research are also addressed.

Modelling human performance within manufacturing systems design:from a theoretical towards a practical framework

Computer-based simulation is frequently used to evaluate the capabilities of proposed manufacturing system designs. Unfortunately, the real systems are often found to perform quite differently from simulation predictions and one possible reason for this is an over-simplistic representation of workers' behaviour within current simulation techniques. The accuracy of design predictions could be improved through a modelling tool that integrates with computer-based simulation and incorporates the factors and relationships that determine workers' performance. This paper explores the viability of developing a similar tool based on our previously published theoretical modelling framework. It focuses on evolving this purely theoretical framework towards a practical modelling tool that can actually be used to expand the capabilities of current simulation techniques. Based on an industrial study, the paper investigates how the theoretical framework works in practice, analyses strengths and weaknesses in its formulation, and proposes developments that can contribute towards enabling human performance modelling in a practical way.

Humans:the missing link in manufacturing simulation?

Computer based discrete event simulation (DES) is one of the most commonly used aids for the design of automotive manufacturing systems. However, DES tools represent machines in extensive detail, while only representing workers as simple resources. This presents a problem when modelling systems with a highly manual work content, such as an assembly line. This paper describes research at Cranfield University, in collaboration with the Ford Motor Company, founded on the assumption that human variation is the cause of a large percentage of the disparity between simulation predictions and real world performance. The research aims to improve the accuracy and reliability of simulation prediction by including models of human factors.

A manufacturing systems modelling using system dynamics:forming a dedicated modelling tool

Discrete event simulation is a popular aid for manufacturing system design; however in application this technique can sometimes be unnecessarily complex. This paper is concerned with applying an alternative technique to manufacturing system design which may well provide an efficient form of rough-cut analysis. This technique is System Dynamics, and the work described in this paper has set about incorporating the principles of this technique into a computer based modelling tool that is tailored to manufacturing system design. This paper is structured to first explore the principles of System Dynamics and how they differ from Discrete Event Simulation. The opportunity for System Dynamics is then explored, and this leads to defining the capabilities that a suitable tool would need. This specification is then transformed into a computer modelling tool, which is then assessed by applying this tool to model an engine production facility. Read More: http://www.worldscientific.com/doi/abs/10.1142/S0219686703000228

Agent-orientated auction mechanism and strategy design

Agent-based technology is playing an increasingly important role in today’s economy. Usually a multi-agent system is needed to model an economic system such as a market system, in which heterogeneous trading agents interact with each other autonomously. Two questions often need to be answered regarding such systems: 1) How to design an interacting mechanism that facilitates efficient resource allocation among usually self-interested trading agents? 2) How to design an effective strategy in some specific market mechanisms for an agent to maximise its economic returns? For automated market systems, auction is the most popular mechanism to solve resource allocation problems among their participants. However, auction comes in hundreds of different formats, in which some are better than others in terms of not only the allocative efficiency but also other properties e.g., whether it generates high revenue for the auctioneer, whether it induces stable behaviour of the bidders. In addition, different strategies result in very different performance under the same auction rules. With this background, we are inevitably intrigued to investigate auction mechanism and strategy designs for agent-based economics. The international Trading Agent Competition (TAC) Ad Auction (AA) competition provides a very useful platform to develop and test agent strategies in Generalised Second Price auction (GSP). AstonTAC, the runner-up of TAC AA 2009, is a successful advertiser agent designed for GSP-based keyword auction. In particular, AstonTAC generates adaptive bid prices according to the Market-based Value Per Click and selects a set of keyword queries with highest expected profit to bid on to maximise its expected profit under the limit of conversion capacity. Through evaluation experiments, we show that AstonTAC performs well and stably not only in the competition but also across a broad range of environments. The TAC CAT tournament provides an environment for investigating the optimal design of mechanisms for double auction markets. AstonCAT-Plus is the post-tournament version of the specialist developed for CAT 2010. In our experiments, AstonCAT-Plus not only outperforms most specialist agents designed by other institutions but also achieves high allocative efficiencies, transaction success rates and average trader profits. Moreover, we reveal some insights of the CAT: 1) successful markets should maintain a stable and high market share of intra-marginal traders; 2) a specialist’s performance is dependent on the distribution of trading strategies. However, typical double auction models assume trading agents have a fixed trading direction of either buy or sell. With this limitation they cannot directly reflect the fact that traders in financial markets (the most popular application of double auction) decide their trading directions dynamically. To address this issue, we introduce the Bi-directional Double Auction (BDA) market which is populated by two-way traders. Experiments are conducted under both dynamic and static settings of the continuous BDA market. We find that the allocative efficiency of a continuous BDA market mainly comes from rational selection of trading directions. Furthermore, we introduce a high-performance Kernel trading strategy in the BDA market which uses kernel probability density estimator built on historical transaction data to decide optimal order prices. Kernel trading strategy outperforms some popular intelligent double auction trading strategies including ZIP, GD and RE in the continuous BDA market by making the highest profit in static games and obtaining the best wealth in dynamic games.

Attentional demand and cost responsibility as stressors in shopfloor jobs

Two studies were conducted to test for the effects of attentional demand and cost responsibility on psychological strain. One was a field experiment involving operators of computer-based manufacturing equipment, and the other was a cross-sectional investigation of employees in a wide range of jobs. The results showed increased strain only for those in jobs high on both attentional demand and cost responsibility. Implications for job design for new manufacturing technologies are discussed.

Reinforcing the security of corporate information resources:a critical review of the role of the acceptable use policy

Increasingly users are seen as the weak link in the chain, when it comes to the security of corporate information. Should the users of computer systems act in any inappropriate or insecure manner, then they may put their employers in danger of financial losses, information degradation or litigation, and themselves in danger of dismissal or prosecution. This is a particularly important concern for knowledge-intensive organisations, such as universities, as the effective conduct of their core teaching and research activities is becoming ever more reliant on the availability, integrity and accuracy of computer-based information resources. One increasingly important mechanism for reducing the occurrence of inappropriate behaviours, and in so doing, protecting corporate information, is through the formulation and application of a formal ‘acceptable use policy (AUP). Whilst the AUP has attracted some academic interest, it has tended to be prescriptive and overly focussed on the role of the Internet, and there is relatively little empirical material that explicitly addresses the purpose, positioning or content of real acceptable use policies. The broad aim of the study, reported in this paper, is to fill this gap in the literature by critically examining the structure and composition of a sample of authentic policies – taken from the higher education sector – rather than simply making general prescriptions about what they ought to contain. There are two important conclusions to be drawn from this study: (1) the primary role of the AUP appears to be as a mechanism for dealing with unacceptable behaviour, rather than proactively promoting desirable and effective security behaviours, and (2) the wide variation found in the coverage and positioning of the reviewed policies is unlikely to be fostering a coherent approach to security management, across the higher education sector.

The information security policy unpacked:a critical study of the content of university policies

Ensuring the security of corporate information, that is increasingly stored, processed and disseminated using information and communications technologies [ICTs], has become an extremely complex and challenging activity. This is a particularly important concern for knowledge-intensive organisations, such as universities, as the effective conduct of their core teaching and research activities is becoming ever more reliant on the availability, integrity and accuracy of computer-based information resources. One increasingly important mechanism for reducing the occurrence of security breaches, and in so doing, protecting corporate information, is through the formulation and application of a formal information security policy (InSPy). Whilst a great deal has now been written about the importance and role of the information security policy, and approaches to its formulation and dissemination, there is relatively little empirical material that explicitly addresses the structure or content of security policies. The broad aim of the study, reported in this paper, is to fill this gap in the literature by critically examining the structure and content of authentic information security policies, rather than simply making general prescriptions about what they ought to contain. Having established the structure and key features of the reviewed policies, the paper critically explores the underlying conceptualisation of information security embedded in the policies. There are two important conclusions to be drawn from this study: (1) the wide diversity of disparate policies and standards in use is unlikely to foster a coherent approach to security management; and (2) the range of specific issues explicitly covered in university policies is surprisingly low, and reflects a highly techno-centric view of information security management.

Application of ensemble averaging to the analysis of electromyography recordings under whole body vibratory stimulation

The aim of this study is to evaluate the application of ensemble averaging to the analysis of electromyography recordings under whole body vibratory stimulation. Recordings from Rectus Femoris, collected during vibratory stimulation at different frequencies, are used. Each signal is subdivided in intervals, which time duration is related to the vibration frequency. Finally the average of the segmented intervals is performed. By using this method for the majority of the recordings the periodic components emerge. The autocorrelation of few seconds of signals confirms the presence of a pseudosinusoidal components strictly related to the soft tissues oscillations caused by the mechanical waves. © 2014 IEEE.

Mobility changes in older age: neuropsychological, neurophysiological and cognitive predictors of successful adaptation in a real world scenario

The aims of this thesis were to investigate the neuropsychological, neurophysiological, and cognitive contributors to mobility changes with increasing age. In a series of studies with adults aged 45-88 years, unsafe pedestrian behaviour and falls were investigated in relation to i) cognitive functions (including response time variability, executive function, and visual attention tests), ii) mobility assessments (including gait and balance and using motion capture cameras), iii) motor initiation and pedestrian road crossing behavior (using a simulated pedestrian road scene), iv) neuronal and functional brain changes (using a computer based crossing task with magnetoencephalography), and v) quality of life questionnaires (including fear of falling and restricted range of travel). Older adults are more likely to be fatally injured at the far-side of the road compared to the near-side of the road, however, the underlying mobility and cognitive processes related to lane-specific (i.e. near-side or far-side) pedestrian crossing errors in older adults is currently unknown. The first study explored cognitive, motor initiation, and mobility predictors of unsafe pedestrian crossing behaviours. The purpose of the first study (Chapter 2) was to determine whether collisions at the near-side and far-side would be differentially predicted by mobility indices (such as walking speed and postural sway), motor initiation, and cognitive function (including spatial planning, visual attention, and within participant variability) with increasing age. The results suggest that near-side unsafe pedestrian crossing errors are related to processing speed, whereas far-side errors are related to spatial planning difficulties. Both near-side and far-side crossing errors were related to walking speed and motor initiation measures (specifically motor initiation variability). The salient mobility predictors of unsafe pedestrian crossings determined in the above study were examined in Chapter 3 in conjunction with the presence of a history of falls. The purpose of this study was to determine the extent to which walking speed (indicated as a salient predictor of unsafe crossings and start-up delay in Chapter 2), and previous falls can be predicted and explained by age-related changes in mobility and cognitive function changes (specifically within participant variability and spatial ability). 53.2% of walking speed variance was found to be predicted by self-rated mobility score, sit-to-stand time, motor initiation, and within participant variability. Although a significant model was not found to predict fall history variance, postural sway and attentional set shifting ability was found to be strongly related to the occurrence of falls within the last year. Next in Chapter 4, unsafe pedestrian crossing behaviour and pedestrian predictors (both mobility and cognitive measures) from Chapter 2 were explored in terms of increasing hemispheric laterality of attentional functions and inter-hemispheric oscillatory beta power changes associated with increasing age. Elevated beta (15-35 Hz) power in the motor cortex prior to movement, and reduced beta power post-movement has been linked to age-related changes in mobility. In addition, increasing recruitment of both hemispheres has been shown to occur and be beneficial to perform similarly to younger adults in cognitive tasks (Cabeza, Anderson, Locantore, & McIntosh, 2002). It has been hypothesised that changes in hemispheric neural beta power may explain the presence of more pedestrian errors at the farside of the road in older adults. The purpose of the study was to determine whether changes in age-related cortical oscillatory beta power and hemispheric laterality are linked to unsafe pedestrian behaviour in older adults. Results indicated that pedestrian errors at the near-side are linked to hemispheric bilateralisation, and neural overcompensation post-movement, 4 whereas far-side unsafe errors are linked to not employing neural compensation methods (hemispheric bilateralisation). Finally, in Chapter 5, fear of falling, life space mobility, and quality of life in old age were examined to determine their relationships with cognition, mobility (including fall history and pedestrian behaviour), and motor initiation. In addition to death and injury, mobility decline (such as pedestrian errors in Chapter 2, and falls in Chapter 3) and cognition can negatively affect quality of life and result in activity avoidance. Further, number of falls in Chapter 3 was not significantly linked to mobility and cognition alone, and may be further explained by a fear of falling. The objective of the above study (Study 2, Chapter 3) was to determine the role of mobility and cognition on fear of falling and life space mobility, and the impact on quality of life measures. Results indicated that missing safe pedestrian crossing gaps (potentially indicating crossing anxiety) and mobility decline were consistent predictors of fear of falling, reduced life space mobility, and quality of life variance. Social community (total number of close family and friends) was also linked to life space mobility and quality of life. Lower cognitive functions (particularly processing speed and reaction time) were found to predict variance in fear of falling and quality of life in old age. Overall, the findings indicated that mobility decline (particularly walking speed or walking difficulty), processing speed, and intra-individual variability in attention (including motor initiation variability) are salient predictors of participant safety (mainly pedestrian crossing errors) and wellbeing with increasing age. More research is required to produce a significant model to explain the number of falls.

An empirical study of the imperatives for a supply chain implementation project in Seagate Technology International

Singapore's electronics manufacturers are facing many questions. In the computer hard-drive industry, where the problem of obsolescence is common and where a product's lifecycle may be only six months, manufacturers are anxious to know what the next order-winning criteria will be. Since low labour costs are no longer a key factor, many organisations are developing their competencies in research and development, sales and marketing, logistics and supply chain management in order to maintain competitiveness. This paper illustrates how Seagate has envisaged a climate of cooperation and collaboration to better serve its customers in the areas of technology, cost and delivery. The paper is based on observations and findings following a longitudinal case study approach at the Seagate Storage Product Group (SPG) in Singapore. The seven-stage implementation framework adopted by Seagate in their SCM project is discussed, together with the process of how Seagate has created a paradigm shift towards a new culture of teamwork-based collaboration.

Knowledge management systems:finding a way with technology

Purpose - To consider the role of technology in knowledge management in organizations, both actual and desired. Design/methodology/approach - Facilitated, computer-supported group workshops were conducted with 78 people from ten different organizations. The objective of each workshop was to review the current state of knowledge management in that organization and develop an action plan for the future. Findings - Only three organizations had adopted a strongly technology-based "solution" to knowledge management problems, and these followed three substantially different routes. There was a clear emphasis on the use of general information technology tools to support knowledge management activities, rather than the use of tools specific to knowledge management. Research limitations/implications - Further research is needed to help organizations make best use of generally available software such as intranets and e-mail for knowledge management. Many issues, especially human, relate to the implementation of any technology. Participation was restricted to organizations that wished to produce an action plan for knowledge management. The findings may therefore represent only "average" organizations, not the very best practice. Practical implications - Each organization must resolve four tensions: Between the quantity and quality of information/knowledge, between centralized and decentralized organization, between head office and organizational knowledge, and between "push" and "pull" processes. Originality/value - Although it is the group rather than an individual that determines what counts as knowledge, hardly any previous studies of knowledge management have collected data in a group context.

The innovation value chain in new technology based firms:evidence from the UK

We present the first innovation value chain analysis for a representative sample of new technology based firms (NTBFs) in the UK. This involves determining which factors lead to the usage of different knowledge sources and the relationships that exist between those sources of knowledge; the effect that each knowledge source has on innovative activity; and how innovation outputs affect the performance of NTBFs. We find that internal and external knowledge sources are complementary for NTBFs, and that supply chain linkages have both a direct and indirect effect on innovation. NTBFs’ skill resources matter throughout the innovation value chain, being positively associated with external knowledge linkages and innovation success, and also having a direct effect on growth independent of the effect on innovation. Exporting matters for performance, but not through any effect on innovation.

R&D, innovation and exporting:evidence from UK new technology based firms

We examine the relationship between R&D, innovation and exporting for a sample of new technology based firms (NTBFs) in the UK. Allowance is made for selection bias and for endogeneity between innovation and exporting. Innovators are more likely to export, but conditional on entering export markets successful innovation does not increases subsequent export intensity. Lagged productivity is strongly associated with exporting, supporting the view that efficient firms are better able to overcome the barriers to entering export markets. We also find strong evidence of the importance of internal R&D and of supply-chain collaborations in fostering innovation, and that formal commercial collaborations can be important in overcoming the (information) sunk costs of entering export markets. The use of e-commerce does nothing to boost entry into export markets, but the intensity of its use is associated with increased export intensity.