A study of the properties and applications of electrostatic charged particle oscillators

This investigation originated from work by Dr. A.H. McIlraith of the National Physical Laboratory who, in 1966, described a new type of charged particle oscillator. This makes use of two equal cylindrical electrodes to constrain the particles in such a way that they follow extremely long oscillatory paths between the electrodes under the influence of an electrostatic field alone. The object of this work has been to study the principle of the oscillator in detail and to investigate its properties and applications. Any device which is capable of creating long electron trajectories has potential application in the field of ultra high vacuum technology. It was therefore considered that a critical review of the problems associated with the production and measurement of ultra high vacuum was relevant in the initial stages of the work. The oscillator has been applied with a considerable degree of success as a high energy electrostatic ion source. This offers several advantages over existing ion sources. It can be operated at much lower pressures without the need of a magnetic field. The oscillator principle has also been applied as a thermionic ionization gauge and has been compared with other ionization gauges to pressures as low as 5 x 10- 11 torr.. This new gauge exhibited a number of advantages over most of the existing gauges. Finally the oscillator has been used in an evaporation ion pump and has exhibited fairly high pumping speeds for argon gas relative to those for nitrogen. This investigation supports the original work of Dr. A.H. McIlraith and shows that his proposed oscillator has considerable potential in the fields of vacuum technology and electron physics.

Developments in technologies for human-centric mobile computing and applications

With recent expansions in technology, mobile computing continues to play a vital role in all aspects of our lives. Digital technology tools such as Web browsing, media tracking, social media, and emailing have made mobile technology more than just a means of communication but has widespread use in business and social networks. Developments in Technologies for Human-Centric Mobile Computing and Applications is a comprehensive collection of knowledge and practice in the development of technologies in human –centric mobile technology. This book focuses on the developmental aspects of mobile technology; bringing together researchers, educators, and practitioners to encourage readers to think outside of the box.

UV-inscription, polarization-dependant loss characteristics and applications of 45° tilted fiber gratings

We have UV-inscribed and theoretically and experimentally analyzed fiber gratings with the structure tilted at 45° and implemented this type of devices as an in-fiber polarizer. A systematic investigation has been carried out on the characterization of 45° tilted fiber gratings (45° TFGs) in terms of the polarization-dependant loss (PDL) and thermal response. The detailed theoretical modeling has revealed a linear correlation between the grating length and the PDL, which has been proved by the experimental results. For the first time, we have examined the UV beam diffraction from a tilted phase mask and designed the UV-inscription system to suit the 45° TFG fabrication. Experimentally, a 24 mm long 45° TFG UV-inscribed in standard telecom single-mode fiber exhibited around 25 dB PDL at 1530 nm and an over ~300 nm bandwidth of PDL spectrum. By the concatenation method, a 44 mm long grating showed a PDL as high as 40 dB that is close to the high polarization extinction ratio of commercial products. Moreover, we have revealed that the PDL of 45° TFGs has low thermal influence, which is desirable for real application devices. Finally, we experimentally demonstrated an all-fiber twist sensor system based on a 45° and an 81° TFG.

Editorial:welcome to the LRN2004 annual conference special issue of the International journal of logistics: research and applications

It is a great pleasure to be Guest Editor for this issue – I hope that the papers which are included will be stimulating and support you in your ongoing research activities. A number of guiding principles were adopted in selecting the papers for inclusion in this issue. Firstly, the papers cover a wide range of logistics and supply chain management (SCM) topics. This is a reflection of the evolution of the field in recent years. In terms of the “buy-make-store-move-sell” model of SCM all the main constituent areas are addressed. Secondly, it is important that the conference issue of this Journal reflects the emphasis and content of the conference itself. I have tried to achieve this in terms of the papers included. One interesting point to note is that outsourcing is a theme which is a major issue in a number of papers. This reflects the increasing importance of this issue to organisations of all kinds and sizes. Economic globalisation and the trend towards vertical disintegration of supply chain architectures have sharpened the focus on outsourcing as a key element of supply chain strategy. The need to move beyond the notion that sourcing of certain activities can be some kind of panacea in evident from the relevant contributions. Thirdly, the LRN Annual Conference has become a more international event in recent years...the number of delegates and papers presented from outside the UK has continued to grow. The papers collected in this issue reflect this internationalization. Two papers are worthy of particular comment from an LRN perspective. The contribution by Jaafar and Rafiq has been developed from the submission which won the best paper prize at the LRN 2004 event. The paper by Pettit and Beresford is based on research which was supported by LRN seed corn funding. It was developed form the final report on this work submitted to CITL (UK) via the LRN. The seed corn funding is an important mechanism whereby the LRN supports research in innovative aspects of logistics in UK universities. In many ways, the LRN2004 event in Dublin seems like a long time ago. From my point of view it was one of the most professionally rewarding activities in which I have been involved in my career. It was a time to meet old friends and new and to keep abreast of the multitude of interesting projects being undertaken in over 20 countries. There are too many people to thank for the smooth running of the event. However, my colleague John Mee does warrant a special mention. His logistical skills were seriously put to the test in the weeks and months leading up to September 9th. 2004. I want to acknowledge his particular contribution to the success of the event. Since then we have had the 2005 event at the University of Plymouth. This was again a great opportunity to network with colleagues and many congratulations are due to John Dinwoodie and his team. We now look forward to LRN 2006 in Newcastle...form my part I hope and trust that this issue provides some useful perspectives and insights into the range of topics addressed.

Knowledge transfer in website design:exploring the processes and benefits of design collaboration for non-creative Micros

This thesis explores the interaction between Micros (<10 employees) from non-creative sectors and website designers ("Creatives") that occurred when creating a website of a higher order than a basic template site. The research used Straussian Grounded Theory Method with a longitudinal design, in order to identify what knowledge transferred to the Micros during the collaboration, how it transferred, what factors affected the transfer and outcomes of the transfer including behavioural additionality. To identify whether the research could be extended beyond this, five other design areas were also examined, as well as five Small to Medium Enterprises (SMEs) engaged in website and branding projects. The findings were that, at the start of the design process, many Micros could not articulate their customer knowledge, and had poor marketing and visual language skills, knowledge core to web design, enabling targeted communication to customers through images. Despite these gaps, most Micros still tried to lead the process. To overcome this disjoint, the majority of the designers used a knowledge transfer strategy termed in this thesis as ‘Bi-Modal Knowledge Transfer’, where the Creative was aware of the transfer but the Micro was unaware, both for drawing out customer knowledge from the Micro and for transferring visual language skills to the Micro. Two models were developed to represent this process. Two models were also created to map changes in the knowledge landscapes of customer knowledge and visual language – the Knowledge Placement Model and the Visual Language Scale. The Knowledge Placement model was used to map the placement of customer knowledge within the consciousness, extending the known Automatic-Unconscious -Conscious model, adding two more locations – Peripheral Consciousness and Occasional Consciousness. Peripheral Consciousness is where potential knowledge is held, but not used. Occasional Consciousness is where potential knowledge is held but used only for specific tasks. The Visual Language Scale was created to measure visual language ability from visually responsive, where the participant only responds personally to visual symbols, to visually multi-lingual, where the participant can use visual symbols to communicate with multiple thought-worlds. With successful Bi-Modal Knowledge Transfer, the outcome included not only an effective website but also changes in the knowledge landscape for the Micros and ongoing behavioural changes, especially in marketing. These effects were not seen in the other design projects, and only in two of the SME projects. The key factors for this difference between SMEs and Micros appeared to be an expectation of knowledge by the Creatives and failure by the SMEs to transfer knowledge within the company.

Multi-frequency segmental bio-impedance device:design, development and applications

Bio-impedance analysis (BIA) provides a rapid, non-invasive technique for body composition estimation. BIA offers a convenient alternative to standard techniques such as MRI, CT scan or DEXA scan for selected types of body composition analysis. The accuracy of BIA is limited because it is an indirect method of composition analysis. It relies on linear relationships between measured impedance and morphological parameters such as height and weight to derive estimates. To overcome these underlying limitations of BIA, a multi-frequency segmental bio-impedance device was constructed through a series of iterative enhancements and improvements of existing BIA instrumentation. Key features of the design included an easy to construct current-source and compact PCB design. The final device was trialled with 22 human volunteers and measured impedance was compared against body composition estimates obtained by DEXA scan. This enabled the development of newer techniques to make BIA predictions. To add a ‘visual aspect’ to BIA, volunteers were scanned in 3D using an inexpensive scattered light gadget (Xbox Kinect controller) and 3D volumes of their limbs were compared with BIA measurements to further improve BIA predictions. A three-stage digital filtering scheme was also implemented to enable extraction of heart-rate data from recorded bio-electrical signals. Additionally modifications have been introduced to measure change in bio-impedance with motion, this could be adapted to further improve accuracy and veracity for limb composition analysis. The findings in this thesis aim to give new direction to the prediction of body composition using BIA. The design development and refinement applied to BIA in this research programme suggest new opportunities to enhance the accuracy and clinical utility of BIA for the prediction of body composition analysis. In particular, the use of bio-impedance to predict limb volumes which would provide an additional metric for body composition measurement and help distinguish between fat and muscle content.

Wind power forecasts using Gaussian processes and numerical weather prediction

Since wind at the earth's surface has an intrinsically complex and stochastic nature, accurate wind power forecasts are necessary for the safe and economic use of wind energy. In this paper, we investigated a combination of numeric and probabilistic models: a Gaussian process (GP) combined with a numerical weather prediction (NWP) model was applied to wind-power forecasting up to one day ahead. First, the wind-speed data from NWP was corrected by a GP, then, as there is always a defined limit on power generated in a wind turbine due to the turbine controlling strategy, wind power forecasts were realized by modeling the relationship between the corrected wind speed and power output using a censored GP. To validate the proposed approach, three real-world datasets were used for model training and testing. The empirical results were compared with several classical wind forecast models, and based on the mean absolute error (MAE), the proposed model provides around 9% to 14% improvement in forecasting accuracy compared to an artificial neural network (ANN) model, and nearly 17% improvement on a third dataset which is from a newly-built wind farm for which there is a limited amount of training data. © 2013 IEEE.

Special issue on intelligent wireless sensor networks and applications

Editorial

Guest editors' introduction : diversity and inclusion in different work settings:emerging patterns, challenges, and research agenda

The purpose of this article is to analyze and highlight the developments in the current scholarship on managing diversity and inclusion (D&I) and provide insights for future research. While doing so, the article advances our understanding of “what matters” in this field, through the integration of different literature concerning the dimensions of D&I. It also provides a neo-institutionalist framework, which locates different themes in the D&I scholarship to assist in further development of the field. It argues for a consideration of inquiry in D&I from a neo-institutionalist perspective to encourage interdisciplinarity and align with broader social science research in human resource management (HRM) and development, highlighting the complexity involved in the theorizing of D&I management in organizations. Specifically, we argue for the need to engage with a variety of stakeholders concerned with the management of D&I, to enable cross-fertilization of theories and mixing methods for future research designs. The article also introduces the manuscripts included in this special issue and build on them as well to develop the future research agenda. © 2015 Wiley Periodicals, Inc.

Design and applications of in-cavity pulse shaping by spectral sculpturing in mode-locked fibre lasers

We review our recent progress on the realisation of pulse shaping in passively-mode-locked fibre lasers by inclusion of an amplitude and/or phase spectral filter into the laser cavity. We numerically show that depending on the amplitude transfer function of the in-cavity filter, various regimes of advanced waveform generation can be achieved, including ones featuring parabolic-, flat-top- and triangular-profiled pulses. An application of this approach using a flat-top spectral filter is shown to achieve the direct generation of high-quality sinc-shaped optical Nyquist pulses with a widely tunable bandwidth from the laser oscillator. We also present the operation of an ultrafast fibre laser in which conventional soliton, dispersion-managed soliton (stretched-pulse) and dissipative soliton mode-locking regimes can be selectively and reliably targeted by adaptively changing the dispersion profile and bandwidth programmed on an in-cavity programmable filter. The results demonstrate the strong potential of an in-cavity spectral pulse shaper for achieving a high degree of control over the dynamics and output of mode-locked fibre lasers.

Recent advances in fundamentals and applications of random fiber lasers

Random fiber lasers blend together attractive features of traditional random lasers, such as low cost and simplicity of fabrication, with high-performance characteristics of conventional fiber lasers, such as good directionality and high efficiency. Low coherence of random lasers is important for speckle-free imaging applications. The random fiber laser with distributed feedback proposed in 2010 led to a quickly developing class of light sources that utilize inherent optical fiber disorder in the form of the Rayleigh scattering and distributed Raman gain. The random fiber laser is an interesting and practically important example of a photonic device based on exploitation of optical medium disorder. We provide an overview of recent advances in this field, including high-power and high-efficiency generation, spectral and statistical properties of random fiber lasers, nonlinear kinetic theory of such systems, and emerging applications in telecommunications and distributed sensing.

A framework for enabling dynamic e-business strategies via new enterprise paradigms and ERP solutions

In the global Internet economy, e-business as a driving force to redefine business models and operational processes is posing new challenges for traditional organizational structures and information system (IS) architectures. These are showing promises of a renewed period of innovative thinking in e-business strategies with new enterprise paradigms and different Enterprise Resource Planning (ERP) systems. In this chapter, the authors consider and investigate how dynamic e-business strategies, as the next evolutionary generation of e-business, can be realized through newly diverse enterprise structures supported by ERP, ERPII and so-called "ERPIII" solutions relying on the virtual value chain concept. Exploratory inductive multi-case studies in manufacturing and printing industries have been conducted. Additionally, it proposes a conceptual framework to discuss the adoption and governance of ERP systems within the context of three enterprise forms for enabling dynamic and collaborative e-business strategies, and particularly demonstrate how an enterprise can dynamically migrate from its current position to the patterns it desires to occupy in the future - a migration that must and will include dynamic e-business as a core competency, but that also relies heavily on ERP-based backbone and other robust technological platform and applications.