46 resultados para Research processes
Resumo:
The editorial section of the special issue of Production Planning & Control discusses contemporary approaches and scope for further research into the management of supply chain integration. Supply chain integration (SCI) is one of the major challenges in enhancing supply chain performance. Building and sustaining competitive advantage requires strategic collaboration between supply chain partners and synchronized management of intra- and inter-organizational practices and processes. The special issue attempts to address some of the fundamental SCI questions, which include but are not limited to the fields of organizational collaboration, information technology (IT) use, and risk and vulnerability management. The editorial first reviews a few key articles on SCI to provide information about the existing state of knowledge on SCI along with scope for further research.
Resumo:
The objectives of the research were to identify factors that influence e-business adoption and its impact on logistics processes in the Greek food industry. Drawing on existing research, a conceptual framework and propositions were developed and six in depth case studies were carried out. In the framework, three major categories of influencing factors were distinguished: intra-enterprise, sector and supply chain factors. Findings suggest that e-business adoption is more affected by supply chain and sector factors, rather than intra-enterprise factors. Regarding the impact of e-business on logistics process, it seems that it is affected by the frequency of its use and it is greater in processes occurring at the company-customer interface. Finally, e-business impact is more related to the dimensions of time and quality, rather than cost improvements.
Resumo:
Inhibition of return (IOR) effects, in which participants detect a target in a cued box more slowly than one in an uncued box, suggest that behavior is aided by inhibition of recently attended irrelevant locations. To investigate the controversial question of whether inhibition can be applied to object identity in these tasks, in the present research we presented faces upright or inverted during cue and/or target sequences. IOR was greater when both cue and target faces were upright than when cue and/or target faces were inverted. Because the only difference between the conditions was the ease of facial recognition, this result indicates that inhibition was applied to object identity. Interestingly, inhibition of object identity affected IOR both whenencoding a cue face andretrieving information about a target face. Accordingly, we propose that episodic retrieval of inhibition associated with object identity may mediate behavior in cuing tasks.
Resumo:
Neuroimaging (NI) technologies are having increasing impact in the study of complex cognitive and social processes. In this emerging field of social cognitive neuroscience, a central goal should be to increase the understanding of the interaction between the neurobiology of the individual and the environment in which humans develop and function. The study of sex/gender is often a focus for NI research, and may be motivated by a desire to better understand general developmental principles, mental health problems that show female-male disparities, and gendered differences in society. In order to ensure the maximum possible contribution of NI research to these goals, we draw attention to four key principles—overlap, mosaicism, contingency and entanglement—that have emerged from sex/gender research and that should inform NI research design, analysis and interpretation. We discuss the implications of these principles in the form of constructive guidelines and suggestions for researchers, editors, reviewers and science communicators.
Resumo:
This thesis explores the interaction between Micros (<10 employees) from non-creative sectors and website designers ("Creatives") that occurred when creating a website of a higher order than a basic template site. The research used Straussian Grounded Theory Method with a longitudinal design, in order to identify what knowledge transferred to the Micros during the collaboration, how it transferred, what factors affected the transfer and outcomes of the transfer including behavioural additionality. To identify whether the research could be extended beyond this, five other design areas were also examined, as well as five Small to Medium Enterprises (SMEs) engaged in website and branding projects. The findings were that, at the start of the design process, many Micros could not articulate their customer knowledge, and had poor marketing and visual language skills, knowledge core to web design, enabling targeted communication to customers through images. Despite these gaps, most Micros still tried to lead the process. To overcome this disjoint, the majority of the designers used a knowledge transfer strategy termed in this thesis as ‘Bi-Modal Knowledge Transfer’, where the Creative was aware of the transfer but the Micro was unaware, both for drawing out customer knowledge from the Micro and for transferring visual language skills to the Micro. Two models were developed to represent this process. Two models were also created to map changes in the knowledge landscapes of customer knowledge and visual language – the Knowledge Placement Model and the Visual Language Scale. The Knowledge Placement model was used to map the placement of customer knowledge within the consciousness, extending the known Automatic-Unconscious -Conscious model, adding two more locations – Peripheral Consciousness and Occasional Consciousness. Peripheral Consciousness is where potential knowledge is held, but not used. Occasional Consciousness is where potential knowledge is held but used only for specific tasks. The Visual Language Scale was created to measure visual language ability from visually responsive, where the participant only responds personally to visual symbols, to visually multi-lingual, where the participant can use visual symbols to communicate with multiple thought-worlds. With successful Bi-Modal Knowledge Transfer, the outcome included not only an effective website but also changes in the knowledge landscape for the Micros and ongoing behavioural changes, especially in marketing. These effects were not seen in the other design projects, and only in two of the SME projects. The key factors for this difference between SMEs and Micros appeared to be an expectation of knowledge by the Creatives and failure by the SMEs to transfer knowledge within the company.
Resumo:
Purpose – The purpose of this research is to study the perceived impact of some factors on the resources allocation processes of the Nigerian universities and to suggest a framework that will help practitioners and academics to understand and improve such processes. Design/methodology/approach – The study adopted the interpretive qualitative approach aimed at an ‘in-depth’ understanding of the resource allocation experiences of key university personnel and their perceived impact of the contextual factors affecting such processes. The analysis of individual narratives from each university established the conditions and factors impacting the resources allocation processes within each institution. Findings – The resources allocation process issues in the Nigerian universities may be categorised into people (core and peripheral units’ challenge, and politics and power); process (resources allocation processes); and resources (critical financial shortage and resources dependence response). The study also provides insight that resourcing efficiency in Nigerian universities appears strongly constrained by the rivalry among the resource managers. The efficient resources allocation process (ERAP) model is proposed to resolve the identified resourcing deficiencies. Research limitations/implications – The research is not focused to provide generalizable observations but ‘in-depth’ perceived factors and their impact on the resources allocation processes in Nigerian universities. The study is limited to the internal resources allocation issues within the universities and excludes the external funding factors. The resource managers’ responses to the identified factors may affect their internal resourcing efficiency. Further research using more empirical samples is required to obtain more widespread results and the implications for all universities. Originality/value – This study contributes a fresh literature framework to resources allocation processes focusing at ‘people’, ‘process’ and ‘resources’. Also a middle range theory triangulation is developed in relation to better understanding of resourcing process management. The study will be of interest to university managers and policy makers.
Resumo:
This article takes stock of the current state of research on knowledge processes in virtual teams (VTs) and consolidates the extent research findings. Virtual teams, on the one hand, constitute important organisational entities that facilitate the integration of diverse and distributed knowledge resources. On the other hand, collaborating in a virtual environment creates particular challenges for the knowledge processes. The article seeks to consolidate the diverse evidence on knowledge processes in VTs with a specific focus on identifying the factors that influence the effectiveness of these knowledge processes. The article draws on the four basic knowledge processes outlined by Alavi and Leidner (2001) (i.e. creation, transferring, storage/retrieval and application) to frame the investigation and discuss the extent research. The consolidation of the existing research findings allows us to recognise the gaps in the understanding of knowledge processes in VTs and identify the important avenues for future research.
Resumo:
Purpose – This paper aims to clarify what ‘narrative analysis’ may entail when it is assumed that interview accounts can be treated as (collections of) narratives. What is considered a narrative and how these may be analyzed is open to debate. After suggesting an approach of how to deal with narrative analysis, the authors critically discuss how far it might offer insights into a particular accounting case. Design/methodology/approach – After having explained what the authors’ view on narrative analysis is, and how this is linked with the extant literature, the authors examine the socialisation processes of two early career accountants that have been articulated in an interview context. Findings – The approach to narrative analysis set out in this paper could help to clarify how and why certain interpretations from an interview are generated by a researcher. The authors emphasise the importance of discussing a researcher’s process of discovery when an interpretive approach to research is adopted. Research limitations/implications – The application of any method, and what a researcher thinks can be distilled from this, depends on the research outlook he/she has. As the authors adopt an interpretive approach to research in this paper, they acknowledge that the interpretations of narratives, and what they deem to be narratives, will be infused by their own perceptions. Practical implications – The authors believe that the writing-up of qualitative research from an interpretive stance would benefit from an explicit acceptance of the equivocal nature of interpretation. The way in which they present and discuss the narrative analyses in this paper intends to bring this to the fore. Originality/value – Whenever someone says he/she engages in narrative analysis, both the “narrative” and “analysis” part of “narrative analysis” need to be explicated. The authors believe that this only happens every so often. This paper puts forward an approach of how more clarity on this might be achieved by combining two frameworks in the extant literature, so that the transparency of the research is enhanced.
Resumo:
This paper presents for the first time the concept of measurement assisted assembly (MAA) and outlines the research priorities of the realisation of this concept in the industry. MAA denotes a paradigm shift in assembly for high value and complex products and encompasses the development and use of novel metrology processes for the holistic integration and capability enhancement of key assembly and ancillary processes. A complete framework for MAA is detailed showing how this can facilitate a step change in assembly process capability and efficiency for large and complex products, such as airframes, where traditional assembly processes exhibit the requirement for rectification and rework, use inflexible tooling and are largely manual, resulting in cost and cycle time pressures. The concept of MAA encompasses a range of innovativemeasurement- assisted processes which enable rapid partto- part assembly, increased use of flexible automation, traceable quality assurance and control, reduced structure weight and improved levels of precision across the dimensional scales. A full scale industrial trial of MAA technologies has been carried out on an experimental aircraft wing demonstrating the viability of the approach while studies within 140 smaller companies have highlighted the need for better adoption of existing process capability and quality control standards. The identified research priorities for MAA include the development of both frameless and tooling embedded automated metrology networks. Other research priorities relate to the development of integrated dimensional variation management, thermal compensation algorithms as well as measurement planning and inspection of algorithms linking design to measurement and process planning. © Springer-Verlag London 2013.
Resumo:
Rework strategies that involve different checking points as well as rework times can be applied into reconfigurable manufacturing system (RMS) with certain constraints, and effective rework strategy can significantly improve the mission reliability of manufacturing process. The mission reliability of process is a measurement of production ability of RMS, which serves as an integrated performance indicator of the production process under specified technical constraints, including time, cost and quality. To quantitatively characterize the mission reliability and basic reliability of RMS under different rework strategies, rework model of RMS was established based on the method of Logistic regression. Firstly, the functional relationship between capability and work load of manufacturing process was studied through statistically analyzing a large number of historical data obtained in actual machining processes. Secondly, the output, mission reliability and unit cost in different rework paths were calculated and taken as the decision variables based on different input quantities and the rework model mentioned above. Thirdly, optimal rework strategies for different input quantities were determined by calculating the weighted decision values and analyzing advantages and disadvantages of each rework strategy. At last, case application were demonstrated to prove the efficiency of the proposed method.
Resumo:
Learning to Research Researching to Learn explores the integration of research into teaching and learning at all levels of higher education. The chapters draw on the long and ongoing debate about the teaching research nexus in universities. Although the vast majority of academics believe that there is an important and valuable link between teaching and research, the precise nature of this relationship continues to be contested. The book includes chapters that showcase innovative ways of learning to research; how research is integrated into coursework teaching; how students learn the processes of research, and how universities are preparing students to engage with the world. The chapters also showcase innovative ways of researching to learn, exploring how students learn through doing research, how they conceptualise the knowledge of their fields of study through the processes of doing research, and how students experiment and reflect on the results produced. These are the key issues addressed by this anthology, as it brings together analyses of the ways in which university teachers are developing research skills in their students, creating enquiry-based approaches to teaching, and engaging in education research themselves. The studies here explore the links between teaching, learning and research in a range of contexts, from pre-enrolment through to academic staff development, in Australia, the UK, the US, Singapore and Denmark. Through a rich array of theoretical and methodological approaches, the collection seeks to further our understanding of how universities can play an effective role in educating graduates suited to the twenty-first century
Resumo:
Purpose – The objective of this paper is to address the question whether and how firms can follow a standard management process to cope with emerging corporate social responsibility (CSR) challenges? Both researchers and practitioners have paid increasing attention to the question because of the rapidly evolving CSR expectations of stakeholders and the limited diffusion of CSR standardization. The question was addressed by developing a theoretical framework to explain how dynamic capabilities can contribute to effective CSR management. Design/methodology/approach – Based on 64 world-leading companies’ contemporary CSR reports, we carried out a large-scale content analysis to identify and examine the common organizational processes involved in CSR management and the dynamic capabilities underpinning those management processes. Findings – Drawing on the dynamic capabilities perspective, we demonstrate how the deployment of three dynamic capabilities for CSR management, namely, scanning, sensing and reconfiguration capabilities can help firms to meet emerging CSR requirements by following a set of common management processes. The findings demonstrate that what is more important in CSR standardization is the identification and development of the underlying dynamic capabilities and the related organizational processes and routines, rather than the detailed operational activities. Originality/value - Our study is an early attempt to examine the fundamental organizational capabilities and processes involved in CSR management from the dynamic capabilities perspective. Our research findings contribute to CSR standardization literature by providing a new theoretical perspective to better understand the capabilities enabling common CSR management processes.
Resumo:
Research indicates associative and strategic deficits mediate age related deficits in memory, whereas simple associative processes are independent of strategic processing and strategic processes mediate resistance to interference. The present study showed age-related deficits in a contingency learning task, although older participants' resistance to interference was not disproportionately affected. Recognition memory predicted discrimination, whereas general cognitive ability predicted resistance to interference, suggesting differentiation between associative and strategic processes in learning and memory, and age declines in associative processes. Older participants' generalisation of associative strength from existing to novel stimulus-response associations was consistent with elemental learning theories, whereas configural models predicted younger participants' responses. This is consistent with associative deficits and reliance on item-level representations in memory during later life. © 2011 Psychology Press Ltd.
Resumo:
En los últimos años, la servitización de la manufactura ha llegado a ser un tópico de interés tanto a nivel académico como empresarial. Así, las empresas están contemplando que la servitización es una forma de mejorar su posición competitiva y estar más cerca de sus clientes. Diferentes estudios empíricos han intentado explicar por qué y cómo se servitiza. Facilitan información clave para entender mejor el proceso de servitización. La conexión entre la academia y la práctica empresarial es decisiva en los fundamentos de este tópico de investigación. La fundamentación del mismo, permitirá continuar con su desarrollo y a la puesta en práctica en las empresas. Así, este número especial pretende contribuir en el avance de la teoría y práctica de la servitización. In recent years, the servitization of manufacturing has become a topic of interest to both academics and practitioners. Indeed, companies are realising that servitization is a way to enhance their competitive advantage and get closer to their customers. Several empirical studies have attempted to explain why and how to servitize. They provide important insights to better understand the processes of servitization. The connection between academia and business practices is decisive in the foundation of this research topic. This foundation will allow continuing with its development, contributing in turn to improve the implementation in companies. Hence, this special issue aims to contribute to the theoretical and practical aspects of servitization.
Resumo:
Much has been written in the educational psychology literature about effective feedback and how to deliver it. However, it is equally important to understand how learners actively receive, engage with, and implement feedback. This article reports a systematic review of the research evidence pertaining to this issue. Through an analysis of 195 outputs published between 1985 and early 2014, we identified various factors that have been proposed to influence the likelihood of feedback being used. Furthermore, we identified diverse interventions with the common aim of supporting and promoting learners' agentic engagement with feedback processes. We outline the various components used in these interventions, and the reports of their successes and limitations. Moreover we propose a novel taxonomy of four recipience processes targeted by these interventions. This review and taxonomy provide a theoretical basis for conceptualizing learners' responsibility within feedback dialogues and for guiding the strategic design and evaluation of interventions. Receiving feedback on one's skills and understanding is an invaluable part of the learning process, benefiting learners far more than does simply receiving praise or punishment (Black & Wiliam, 1998 Black, P., & Wiliam, D. (1998). Assessment and classroom learning. Assessment in Education: Principles, Policy & Practice, 5, 7–74. doi:10.1080/0969595980050102[Taylor & Francis Online]; Hattie & Timperley, 2007 Hattie, J., & Timperley, H. (2007). The power of feedback. Review of Educational Research, 77, 81–112. doi:10.3102/003465430298487[CrossRef], [Web of Science ®]). Inevitably, the benefits of receiving feedback are not uniform across all circumstances, and so it is imperative to understand how these gains can be maximized. There is increasing consensus that a critical determinant of feedback effectiveness is the quality of learners' engagement with, and use of, the feedback they receive. However, studies investigating this engagement are underrepresented in academic research (Bounds et al., 2013 Bounds, R., Bush, C., Aghera, A., Rodriguez, N., Stansfield, R. B., & Santeen, S. A. (2013). Emergency medicine residents' self-assessments play a critical role when receiving feedback. Academic Emergency Medicine, 20, 1055–1061. doi:10.1111/acem.12231[CrossRef], [PubMed], [Web of Science ®]), which leaves a “blind spot” in our understanding (Burke, 2009 Burke, D. (2009). Strategies for using feedback students bring to higher education. Assessment & Evaluation in Higher Education, 34, 41–50. doi:10.1080/02602930801895711[Taylor & Francis Online], [Web of Science ®]). With this blind spot in mind, the present work sets out to systematically map the research literature concerning learners' proactive recipience of feedback. We use the term “proactive recipience” here to connote a state or activity of engaging actively with feedback processes, thus emphasizing the fundamental contribution and responsibility of the learner (Winstone, Nash, Rowntree, & Parker, in press Winstone, N. E., Nash, R. A., Rowntree, J., & Parker, M. (in press). ‘It'd be useful, but I wouldn't use it’: Barriers to university students' feedback seeking and recipience. Studies in Higher Education. doi: 10.1080/03075079.2015.1130032[Taylor & Francis Online]). In other words, just as Reeve and Tseng (2011 Reeve, J., & Tseng, M. (2011). Agency as a fourth aspect of student engagement during learning activities. Contemporary Educational Psychology, 36, 257–267. doi:10.1016/j.cedpsych.2011.05.002[CrossRef], [Web of Science ®]) defined “agentic engagement” as a “student's constructive contribution into the flow of the instruction they receive” (p. 258), likewise proactive recipience is a form of agentic engagement that involves the learner sharing responsibility for making feedback processes effective.