Discrete element modelling of a rotating drum and drum granulation

This thesis reports the results of DEM (Discrete Element Method) simulations of rotating drums operated in a number of different flow regimes. DEM simulations of drum granulation have also been conducted. The aim was to demonstrate that a realistic simulation is possible, and further understanding of the particle motion and granulation processes in a rotating drum. The simulation model has shown good qualitative and quantitative agreement with other published experimental results. A two-dimensional bed of 5000 disc particles, with properties similar to glass has been simulated in the rolling mode (Froude number 0.0076) with a fractional drum fill of approximately 30%. Particle velocity fields in the cascading layer, bed cross-section, and at the drum wall have shown good agreement with experimental PEPT data. Particle avalanches in the cascading layer have been shown to be consistent with single layers of particles cascading down the free surface towards the drum wall. Particle slip at the drum wall has been shown to depend on angular position, and ranged from 20% at the toe and shoulder, to less than 1% at the mid-point. Three-dimensional DEM simulations of a moderately cascading bed of 50,000 spherical elastic particles (Froude number 0.83) with a fractional fill of approximately 30% have also been performed. The drum axis was inclined by 50 to the horizontal with periodic boundaries at the ends of the drum. The mean period of bed circulation was found to be 0.28s. A liquid binder was added to the system using a spray model based on the concept of a wet surface energy. Granule formation and breakage processes have been demonstrated in the system.

Modeling foreign exchange rate pass-through using the exponential GARCH

In this chapter, the authors use an EGARCH-ECM to estimate the pass-through effects of Foreign Exchange (FX) rate changes and changes in producers' prices for 20 U.K. export sectors. The long-run adjustments of export prices to FX rate changes and changes in producers' prices are within the range of -1.02% (for the Textiles sector) and -17.22% (for the Meat sector). The contemporaneous Pricing-To-Market (PTM) coefficients are within the range of -72.84% (for the Fuels sector) and -8.05% (for the Textiles sector). Short-run FX rate pass-through is not complete even after several months. Rolling EGARCH-ECMs show that the short and long-run effects of changes in FX rate and producers' prices vary substantially, as do asymmetry and volatility estimates before equilibrium is achieved.

Your students have excellent knowledge and skills but they don’t think about them...:a reflective learning project

This paper describes two phases of a project set up to encourage students to be more reflective about their studies and their career goals. it takes as its starting point a discussion with employers about the Jack of reflection that they observed in otherwise highly skilled management graduates. The project.examin!ld.a number of processes, including mentoring, logbooks and learning style questionnaires to gauge which was the most effective in inspiring students to be reflective. Having identified the best methods the project entered a second phase which involved rolling out the findings to large numbers of students. The challenges of doing this are analysed in the paper.

Pricing-to-market using EGARCH-error correction model

In this paper, the authors use an exponential generalized autoregressive conditional heteroscedastic (EGARCH) error-correction model (ECM), that is, EGARCH-ECM, to estimate the pass-through effects of foreign exchange (FX) rates and producers’ prices for 20 U.K. export sectors. The long-run adjustment of export prices to FX rates and producers’ prices is within the range of -1.02% (for the Textiles sector) and -17.22% (for the Meat sector). The contemporaneous pricing-to-market (PTM) coefficient is within the range of -72.84% (for the Fuels sector) and -8.05% (for the Textiles sector). Short-run FX rate pass-through is not complete even after several months. Rolling EGARCH-ECMs show that the short and long-run effects of FX rate and producers’ prices fluctuate substantially as are asymmetry and volatility estimates before equilibrium is achieved.

Low frequency dielectric spectroscopy of bitumen binders as an indicator of adhesion potential to quartz aggregates using Portland cement

The purpose of this investigation was to interpret the bitumen-aggregate adhesion based on the dielectric spectroscopic response of individual material components utilizing their dielectric constants, refractive indices and average tangent of the dielectric loss angle (average loss tangent). Dielectric spectroscopy of bitumen binders at room temperature was performed in the frequency range of 0.01–1000 Hz. Dielectric spectroscopy is an experimental method for characterizing the dielectric permittivity of a material as a function of frequency. Adhesion data has been determined using the Rolling bottle method. The results show that the magnitude of the average tangent of the dielectric loss angle (average loss tangent) depends on bitumen type. The average loss tangent in the frequency range 0.01–1 Hz is introduced as a potential indicator for predicting polarizability and, thereby, adhesion potential of bitumen binders to quartz aggregates when using Portland cement. In order to obtain acceptable adhesion of 70/100 penetration grade bitumen binders and quartz aggregates when using Portland cement, it is suggested that the binder have an average tan δ > 0.035 in the frequency range 0.01–1 Hz.

Measuring the flow properties of small powder samples using an avalanche tester

The feasibility of using a small-scale avalanche tester to measure the flow properties of pharmaceutical lactose powders was examined. The modes of behaviour observed in larger systems were displayed and showed a clear distinction between angular, free-flowing particles and more spherical particles of similar flow characteristics. Angular Lactohale LH100 particles showed slumping behaviour at a rotational frequency of 0.33Hz which disappeared at higher frequencies. Spherical lactose powder with a similar flow function to LH100 only showed rolling behaviour under the same conditions, as did more cohesive powders LH200 and LH300. Further investigation of the LH100 data using Fast Fourier analysis showed that the slumping frequency was 1/10th of the rotational frequency.

Who gives a damn about intellectually disabled people and their families? Care-less spaces personified in the case of LB

On 5 October 2015 the inquest into Connor Sparrowhawk’s death began. A young autistic man, aged 18, died in the bath on 4 July 2013. He had a seizure. The rolling tweets from @LBInquest are harrowing to say the least. Unimaginable torture for Sara and Richard (his mother and step-father), as well as his siblings and others caring. Comments from the inquest such as ‘I felt that Connor should be checked on every 5 or 10 minutes when he was in the bath because of his epilepsy’ and ‘ensuring someone was outside the door when he was bathing was basic nursing care’ sound all the alarm bells for lack of care, because allegedly this did not happen. Clearly there was no one person looking out for him when he needed it the most. On 16 October 2015 the inquest jury found Connor’s death was contributed by neglect. This article will explore the absence of care in a care-less system.