Productivity and price performance in the privatized water and sewerage companies of England and Wales

After its privatization in 1989, the water and sewerage industry of England and Wales faced a new regulatory régime and implemented a substantial capital investment program aimed at improving water and environmental standards. A new RPI + K regulatory pricing system was designed to compensate the industry for its increased capital costs, encourage increased efficiency, and maintain fair prices for customers. This paper evaluates how successful privatization and the resulting system of economic regulation has been. Estimates of productivity growth, derived with quality adjusted output indices, suggest that despite reductions in labor usage, total factor productivity growth has not improved since privatization. Moreover, total price performance indices reveal that increases in output prices have outstripped increases in input costs, a trend which is largely responsible for the increase in economic profits that has occurred since privatization. * We would like to thank Emmanuel Thanassoulis, Joshy Easaw, Jim Love, John Sawkins, and an anonymous referee for helpful comments on earlier drafts of this paper. The usual disclaimer applies.

An analysis of the effectiveness of a behavioural based safety intervention in a UK paper mill

This research examines a behavioural based safety (BBS) intervention within a paper mill in the South East of England. Further to this intervention two other mills are examined for the purposes of comparison — one an established BBS programme and the other an improving safety management system through management ownership. BBS programmes have become popular within the UK, but most of the research about their efficacy is carried out by the BBS providers themselves. This thesis aims to evaluate a BBS intervention from a standpoint which is not commercially biased in favour of BBS schemes. The aim of a BBS scheme is to either change personnel behaviours or attitudes, which in turn will positively affect the organisation's safety culture. The research framework involved a qualitative methodology in order to examine the effects of the intervention on the paper mill's safety culture. The techniques used were questionnaires and semi structured interviews, in addition to observation and discussions which were possible because of the author's position as participant observer. The results demonstrated a failure to improve any aspect of the mill's safety culture, which worsened following the BBS intervention. Issues such as trust, morale, communication and support of management showed significant signs of negative workforce response. The paper mill where the safety management system approach was utilised demonstrated a significantly improved safety culture and achieved site ownership from middle managers and supervisors. Research has demonstrated that a solid foundation is required prior to successfully implementing a BBS programme. For a programme to work there must be middle management support in addition to senior management commitment. If a trade union actively distances itself from BBS, it is also unlikely to be effective. This thesis proposes that BBS observation programmes are not suitable for the papermaking industry, particularly when staffing levels are low due to challenging economic conditions. Observers are not available when there are high hazard situations and this suggests that BBS implementation is not the correct intervention for the paper industry.

Drying processess in the United Kingdom:assessment of industrial energy utilisation and efficiency of drying systems and the modelling of drying characters using neural networks (BL)

Drying is an important unit operation in process industry. Results have suggested that the energy used for drying has increased from 12% in 1978 to 18% of the total energy used in 1990. A literature survey of previous studies regarding overall drying energy consumption has demonstrated that there is little continuity of methods and energy trends could not be established. In the ceramics, timber and paper industrial sectors specific energy consumption and energy trends have been investigated by auditing drying equipment. Ceramic products examined have included tableware, tiles, sanitaryware, electrical ceramics, plasterboard, refractories, bricks and abrasives. Data from industry has shown that drying energy has not varied significantly in the ceramics sector over the last decade, representing about 31% of the total energy consumed. Information from the timber industry has established that radical changes have occurred over the last 20 years, both in terms of equipment and energy utilisation. The energy efficiency of hardwood drying has improved by 15% since the 1970s, although no significant savings have been realised for softwood. A survey estimating the energy efficiency and operating characteristics of 192 paper dryer sections has been conducted. Drying energy was found to increase to nearly 60% of the total energy used in the early 1980s, but has fallen over the last decade, representing 23% of the total in 1993. These results have demonstrated that effective energy saving measures, such as improved pressing and heat recovery, have been successfully implemented since the 1970s. Artificial neural networks have successfully been applied to model process characteristics of microwave and convective drying of paper coated gypsum cove. Parameters modelled have included product moisture loss, core gypsum temperature and quality factors relating to paper burning and bubbling defects. Evaluation of thermal and dielectric properties have highlighted gypsum's heat sensitive characteristics in convective and electromagnetic regimes. Modelling experimental data has shown that the networks were capable of simulating drying process characteristics to a high degree of accuracy. Product weight and temperature were predicted to within 0.5% and 5C of the target data respectively. Furthermore, it was demonstrated that the underlying properties of the data could be predicted through a high level of input noise.

Which factors drive firm survival within an industry boundary over time?:the UK onshore oil and gas production industry 1984-1999

This thesis looks at the UK onshore oil and gas production industry and follows the history of a population of firms over a fifteen-year period following the industry's renaissance. It examines the linkage between firm survival, selection pressures and adaptation responses at the firm level, especially the role of discretionary adaptation, specifically exploration and exploitation strategies.Taking a Realist approach and using quantitative and qualitative methods for triangulation on a new data base derived from archival data, as well as informant interviews, it tests seven hypotheses' about post-entry survival of firms. The quantitative findings suggest that firm survival within this industry is linked to discretionary adaptation, when measured at the firm level, and to a mixture of selection and adaptation forces when measured for each firm for each individual year. The qualitative research suggests that selection factors dominate. This difference in views is unresolved. However the small, sparse population and the nature of the oil and gas industry compared with other common research contexts such as manufacturing or service firms suggests the results be treated with caution as befits a preliminary investigation. The major findings include limited support for the theory that the external environment is the major determinant of firm survival, though environment components affect firms differentially; resolution of apparent literature differences relating to the sequencing of exploration and exploitation and potential tangible evidence of coevolution. The research also finds that, though selection may be considered important by industry players, discretionary adaptation appears to play the key role, and that the key survival drivers for thispopulation are intra-industry ties, exploitation experience and a learning/experience component. Selection has a place, however, in determining the life-cycle of the firm returning to be a key survival driver at certain ages of the firm inside the industry boundary.

Rethinking policy options for industry:Appropriateness of policies for industry and UK farming and food

Purpose - Studies the implementation of lean supply and partnership relationships in the UK food and farming industry to assess if these types of interventions are effective. Design/methodology/approach - Reviews the challenges affecting the UK supply chain for red meat. Describes the initiatives that were set up to develop a lean supply chain management approach and examines their application in the UK pig and beef industries. Assesses if these changes benefited all participants in the supply chains. Uses semi-structured interviews with key actors in each stage of the supply chain to do this, identifying the power relations within the supply chains and how these affected the outcomes for those participating in the chain. Findings - Concludes that lean initiatives were appropriate for the pig industry but were of limited value for the beef industry. Even within the pig industry, highlights that benefits were not shared equally, with producers, in particular, losing out. Lastly, points out that lean supply chain management is unlikely to be appropriate operationally and commercially in all circumstances in one industry. Argues for a differentiated policy approach and sets out a framework which enables decision makers to select industrial policy options. Research limitations/ implications - Describes the analysis and the framework developed from it. Originality/value - Assesses the effectiveness of lean supply chain management.

A barrier and techno-economic analysis of small-scale bCHP (biomass combined heat and power) schemes in the UK

bCHP (Biomass combined heat and power) systems are highly efficient at smaller-scales when a significant proportion of the heat produced can be effectively utilised for hot water, space heating or industrial heating purposes. However, there are many barriers to project development and this has greatly inhibited deployment in the UK. Project viability is highly subjective to changes in policy, regulation, the finance market and the low cost fossil fuel incumbent. The paper reviews the barriers to small-scale bCHP project development in the UK along with a case study of a failed 1.5MWel bCHP scheme. The paper offers possible explanations for the project's failure and suggests adaptations to improve the project resilience. Analysis of the project's: capital structuring contract length and bankability; feedstock type and price uncertainty, and plant oversizing highlight the negative impact of the existing project barriers on project development. The research paper concludes with a discussion on the effects of these barriers on the case study project and this industry more generally. A greater understanding of the techno-economic effects of some barriers for small-scale bCHP schemes is demonstrated within this paper, along with some methods for improving the attractiveness and resilience of projects of this kind. © 2014 Elsevier Ltd.

The use of ICT by logistics service providers and implications for training needs:a cross-country perspective

Changes in the international economic scenario in recent years have made it necessary for both industrial and service firms to reformulate their strategies, with a strong focus on the resources required for successful implementation. In this scenario, information and communication technologies (ICT) has a potentially vital role to play both as a key resource for re-engineering business processes within a framework of direct connection between suppliers and customers, and as a source of cost optimisation. There have also been innovations in the logistics and freight transport industry in relation to ICT diffusion. The implementation of such systems by third party logistics providers (3PL) allows the real-time exchange of information between supply chain partners, thereby improving planning capability and customer service. Unlike other industries, the logistics and freight transport industry is lagging somewhat behind other sectors in ICT diffusion. This situation is to be attributed to a series of both industry-specific and other factors, such as: (a) traditional resistance to change on the part of transport and logistics service providers; (b) the small size of firms that places considerable constraints upon investment in ICT; (c) the relative shortage of user-friendly applications; (d) the diffusion of internal standards on the part of the main providers in the industry whose aim is to protect company information, preventing its dissemination among customers and suppliers; (e) the insufficient degree of professional skills for using such technologies on the part of staff in such firms. The latter point is of critical importance insofar as the adoption of ICT is making it increasingly necessary both to develop new technical skills to use different hardware and new software tools, and to be able to plan processes of communication so as to allow the optimal use of ICT. The aim of this paper is to assess the impact of ICT on transport and logistics industry and to highlight how the use of such new technologies is affecting providers' training needs. The first part will provide a conceptual framework of the impact of ICT on the transport and logistics industry. In the second part the state of ICT dissemination in the Italian and Irish third party logistics industry will be outlined. In the third part, the impact of ICT on the training needs of transport and logistics service providers - based on case studies in both countries - are discussed. The implications of the foregoing for the development of appropriate training policies are considered. For the covering abstract see ITRD E126595.

How does the tobacco industry attempt to influence marketing regulations? A systematic review

BACKGROUND: The Framework Convention on Tobacco Control makes a number of recommendations aimed at restricting the marketing of tobacco products. Tobacco industry political activity has been identified as an obstacle to Parties' development and implementation of these provisions. This study systematically reviews the existing literature on tobacco industry efforts to influence marketing regulations and develops taxonomies of 1) industry strategies and tactics and 2) industry frames and arguments. METHODS: Searches were conducted between April-July 2011, and updated in March 2013. Articles were included if they made reference to tobacco industry efforts to influence marketing regulations; supported claims with verifiable evidence; were written in English; and concerned the period 1990-2013. 48 articles met the review criteria. Narrative synthesis was used to combine the evidence. RESULTS: 56% of articles focused on activity in North America, Europe or Australasia, the rest focusing on Asia (17%), South America, Africa or transnational activity. Six main political strategies and four main frames were identified. The tobacco industry frequently claims that the proposed policy will have negative unintended consequences, that there are legal barriers to regulation, and that the regulation is unnecessary because, for example, industry does not market to youth or adheres to a voluntary code. The industry primarily conveys these arguments through direct and indirect lobbying, the promotion of voluntary codes and alternative policies, and the formation of alliances with other industrial sectors. The majority of tactics and arguments were used in multiple jurisdictions. CONCLUSIONS: Tobacco industry political activity is far more diverse than suggested by existing taxonomies of corporate political activity. Tactics and arguments are repeated across jurisdictions, suggesting that the taxonomies of industry tactics and arguments developed in this paper are generalisable to multiple jurisdictions and can be used to predict industry activity.

Experimental investigation of the fuel properties of glidfuel, palm oil mill effluent biodiesel and blends

Biofuels derived from industry waste have potential to substitute fossil fuels (Diesel and Gasoline) in internal combustion (IC) engines. Use of waste streams as fuels would help to reduce considerably life-cycle greenhouse gas emissions and minimise waste processing costs. In this study an investigation into the fuel properties of two waste derived biofuels were carried out, they are: (i) Glidfuel (GF) biofuel - a waste stream from paper industry, and (ii) Palm Oil Mill Effluent (POME) biodiesel - biodiesel produced from palm oil industry effluent through various treatment and transesterification process. GF and POME was mixed together at various proportions and separately with fossil diesel (FD) to assess the miscibility and various physical and chemical properties of the blends. Fuel properties such as kinematic viscosity, higher heating value, water content, acid number, density, flash point temperature, CHNO content, sulphur content, ash content, oxidation stability, cetane number and copper corrosion ratings of all the fuels were measured. The properties of GF, POME and various blends were compared with the corresponding properties of the standard FD. Significance of the fuel properties and their expected effects on combustion and exhaust emission characteristics of the IC engine were discussed. Results showed that most properties of both GF and POME biodiesel were comparable to FD. Both GF and POME were miscible with each other, and also separately with the FD. Flash point temperatures of GF and POME biodiesel were 40.7°C and 158.7°C respectively. The flash point temperature of GF was about 36% lower than corresponding FD. The water content in GF and FD were 0.74 (% wt) and 0.01 (% wt) respectively. Acidity values and corrosion ratings of both GF and POME biodiesel were low compared to corresponding value for FD. The study concluded that optimum GF-POME biofuel blends can substitute fossil diesel use in IC engines.