A multi-organisational approach for disaster preparedness and response:the use of optimisation and GIS for facility location, stock pre-positioning, resource allocation and relief distribution

From 1992 to 2012 4.4 billion people were affected by disasters with almost 2 trillion USD in damages and 1.3 million people killed worldwide. The increasing threat of disasters stresses the need to provide solutions for the challenges faced by disaster managers, such as the logistical deployment of resources required to provide relief to victims. The location of emergency facilities, stock prepositioning, evacuation, inventory management, resource allocation, and relief distribution have been identified to directly impact the relief provided to victims during the disaster. Managing appropriately these factors is critical to reduce suffering. Disaster management commonly attracts several organisations working alongside each other and sharing resources to cope with the emergency. Coordinating these agencies is a complex task but there is little research considering multiple organisations, and none actually optimising the number of actors required to avoid shortages and convergence. The aim of the this research is to develop a system for disaster management based on a combination of optimisation techniques and geographical information systems (GIS) to aid multi-organisational decision-making. An integrated decision system was created comprising a cartographic model implemented in GIS to discard floodable facilities, combined with two models focused on optimising the decisions regarding location of emergency facilities, stock prepositioning, the allocation of resources and relief distribution, along with the number of actors required to perform these activities. Three in-depth case studies in Mexico were studied gathering information from different organisations. The cartographic model proved to reduce the risk to select unsuitable facilities. The preparedness and response models showed the capacity to optimise the decisions and the number of organisations required for logistical activities, pointing towards an excess of actors involved in all cases. The system as a whole demonstrated its capacity to provide integrated support for disaster preparedness and response, along with the existence of room for improvement for Mexican organisations in flood management.

The state of the nations:current and future developments in technology enhanced learning

Right across Europe technology is playing a vital part in enhancing learning for an increasingly diverse population of learners. Learning is increasingly flexible, social and mobile and supported by high quality multi-media resources. Institutional VLEs are seeing a shift towards open source products and these core systems are supplemented by a range of social and collaborative learning tools based on web 2.0 technologies. Learners undertaking field studies and those in the workplace are coming to expect that these off-campus experiences will also be technology-rich whether supported by institutional or user-owned devices. As well as keeping European businesses competitive, learning is seen as a means of increasing social mobility and supporting an agenda of social justice. For a number of years the EUNIS E-Learning Task Force (ELTF) has conducted snapshot surveys of e-learning across member institutions, collected case studies of good practice in e-learning see (Hayes, et al., 2009) in references, supported a group looking at the future of e-learning, and showcased the best of innovation in its e-learning Award. Now for the first time the ELTF membership has come together to undertake an analysis of developments in the member states and to assess what this might mean for the future. The group applied the techniques of World Café conversation and Scenario Thinking to develop its thoughts. The analysis is unashamedly qualitative and draws on expertise from leading universities across eight of the EUNIS member states. What emerges is interesting in terms of the common trends in developments in all of the nations and similarities in hopes and concerns about the future development of learning.

International technology transfer and collaborative new product development:evidence and a case from the machine tool industry

In recent years, it has become increasingly common for companies to improve their competitiveness and find new markets by extending their operations through international new product development collaborations involving technology transfer. Technology development, cost reduction and market penetration are seen as the foci in such collaborative operations with the aim being to improve the competitive position of both partners. In this paper, the case of technology transfer through collaborative new product development in the machine tool sector is used to provide a typical example of such partnerships. The paper outlines the links between the operational aspects of collaborations and their strategic objectives. It is based on empirical data collected from the machine tool industries in the UK and China. The evidence includes longitudinal case studies and questionnaire surveys of machine tool manufacturers in both countries. The specific case of BSA Tools Ltd and its Chinese partner the Changcheng Machine Tool Works is used to provide an in-depth example of the operational development of a successful collaboration. The paper concludes that a phased coordination of commercial, technical and strategic interactions between the two partners is essential for such collaborations to work.

Success strategies in the Chinese chemical industry: a survey and case study investigations

The chemical industry in China is facing fierce competition and exposure to market forces as a result of changes in the country's economic policy. The Chinese government has applied administrative actions rather than simply relying on market forces to address the changing dynamics. It has attempted to privatise state-owned chemical enterprises (SOCEs) by corporatisation, coupled with industrial restructuring by merging individual state-owned enterprises into groups. Based on a quantitative survey in combination with case studies of two Chinese chemical enterprises, this paper concludes that in this industry building competences is more effective than privatisation and restructuring to improve performance.

Editorial

This second issue of Knowledge Management Research & Practice (KMRP) continues the international nature of the first issue, with papers from authors based on four different continents. There are five regular papers, plus the first of what is intended to be an occasional series of 'position papers' from respected figures in the knowledge management field, who have specific issues they wish to raise from a personal standpoint. The first two regular papers are both based on case studies. The first is 'Aggressively pursuing knowledge management over two years: a case study a US government organization' by Jay Liebowitz. Liebowitz is well known to both academics and practictioners as an author on knowledge management and knowledge based systems. Government departments in many Western countries must soon face up to the problems that will occur as the 'baby boomer' generation reaches retirement age over the next decade. This paper describes how one particular US government organization has attempted to address this situation (and others) through the introduction of a knowledge management initiative. The second case study paper is 'Knowledge creation through the synthesizing capability of networked strategic communities: case study on new product development in Japan' by Mitsuru Kodama. This paper looks at the importance of strategic communities - communities that have strategic relevance and support - in knowledge management. Here, the case study organization is Nippon Telegraph and Telephone Corporation (NTT), a Japanese telecommunication firm. The third paper is 'Knowledge management and intellectual capital: an empirical examination of current practice in Australia' by Albert Zhou and Dieter Fink. This paper reports the results of a survey carried out in 2001, exploring the practices relating to knowledge management and intellectual capital in Australia and the relationship between them. The remaining two regular papers are conceptual in nature. The fourth is 'The enterprise knowledge dictionary' by Stuart Galup, Ronald Dattero and Richard Hicks. Galup, Dattero and Hicks propose the concept of an enterprise knowledge dictionary and its associated knowledge management system architecture as offering the appropriate form of information technology to support various different types of knowledge sources, while behaving as a single source from the user's viewpoint. The fifth and final regular paper is 'Community of practice and metacapabilities' by Geri Furlong and Leslie Johnson. This paper looks at the role of communities of practice in learning in organizations. Its emphasis is on metacapabilities - the properties required to learn, develop and apply skills. This discussion takes work on learning and core competences to a higher level. Finally, this issue includes a position paper 'Innovation as an objective of knowledge management. Part I: the landscape of management' by Dave Snowden. Snowden has been highly visible in the knowledge management community thanks to his role as the Director of IBM Global Services' Canolfan Cynefin Centre. He has helped many government and private sector organizations to consider their knowledge management problems and strategies. This, the first of two-part paper, is inspired by the notion of complexity. In it, Snowden calls for what he sees as a 20th century emphasis on designed systems for knowledge management to be consigned to history, and replaced by a 21st century emphasis on emergence. Letters to the editor on this, or any other topic related to knowledge management research and practice, are welcome. We trust that you will find the contributions stimulating, and again invite you to contribute your own paper(s) to future issues of KMRP.

Reliability management of machine tool technology: a case study of current practice

Considerable attention has been given in the literature to identifying and describing the effective elements which positively affect the improvement of product reliability. These have been perceived by many as the 'state of the art' in the manufacturing industry. The applicability, diffusion and effectiveness of such methods and philosophies, as a means of systematically improving the reliability of a product, come in the main from case studies and single and infra-industry empirical studies. These studies have both been carried out within the wider context of quality assurance and management, and taking reliability as a discipline in its own right. However, it is somewhat of a surprise that there are no recently published findings or research studies on the adoption of these methods by the machine tool industry. This may lead one to construct several hypothesised paradigms: (a) that machine tool manufacturers compared to other industries, are slow to respond to propositions given in the literature by theorists or (b) this may indicate that a large proportion of the manufacturers make little use of the reliability improvement techniques as described in the literature, with the overall perception that they will not lead to any significant improvements? On the other hand, it is evident that hypothetical verification of the operational and engineering methods of reliability achievement and improvement adopted in the machine tool industry is less widely researched. Therefore, research into this area is needed in order to explore the 'state of the art' practice in the machine tool industry. This is in terms of the status, structure and activities of the operation of the reliability function. This paper outlines a research programme being conducted with the co-operation of a leading machine tool manufacturer, whose UK manufacturing plant produces in the main Vertical Machining Centres (VMCs) and is continuously undergoing incremental transitions in product reliability improvement.

Comparing transport emissions and impacts for energy recovery from domestic waste (EfW): centralised and distributed disposal options for two UK Counties

Many local authorities (LAs) are currently working to reduce both greenhouse gas emissions and the amount of municipal solid waste (MSW) sent to landfill. The recovery of energy from waste (EfW) can assist in meeting both of these objectives. The choice of an EfW policy combines spatial and non-spatial decisions which may be handled using Multi-Criteria Analysis (MCA) and Geographic Information Systems (GIS). This paper addresses the impact of transporting MSW to EfW facilities, analysed as part of a larger decision support system designed to make an overall policy assessment of centralised (large-scale) and distributed (local-scale) approaches. Custom-written ArcMap extensions are used to compare centralised versus distributed approaches, using shortest-path routing based on expected road speed. Results are intersected with 1-kilometre grids and census geographies for meaningful maps of cumulative impact. Case studies are described for two counties in the United Kingdom (UK); Cornwall and Warwickshire. For both case study areas, centralised scenarios generate more traffic, fuel costs and emitted carbon per tonne of MSW processed.

Services for activities in group editing 'sage'

The project described in this thesis investigates the needs of a group of people working cooperatively in an OSI environment, and recommends tools and services to meet these needs. The project looks specifically at Services for Activities in Group Editing, and is identified as the `SAGE' project. The project uses case studies to identify user requirements and to determine common functionalities for a variety of group editing activities. A prototype is implemented in an X.400 environment to help refine user requirements, as a source of new ideas and to test the proposed functionalities. The conceptual modelling follows current CCITT proposals, but a new classification of group activities is proposed: Informative, Objective and Supportive application groups. It is proposed that each of these application groups have their own Service Agent. Use of this classification allows the possibility of developing three sets of tools which will cover a wide range of group activities, rather than developing tools for individual activities. Group editing is considered to be in the Supportive application group. A set of additional services and tools to support group editing are proposed in the context of the CCITT draft on group communication, X.gc. The proposed services and tools are mapped onto the X.400 series of recommendations, with the Abstract Service Definition of the operational objects defined, along with their associated component files, by extending the X.420 protocol functionality. It is proposed that each of the Informative, Objective and Supportive application groups should be implemented as a modified X.420 inter-personal messaging system.

The impact of the language barrier on the management of multinational companies : a case study and survey, based exploration of the impact of the language barrier on the strategies, policies and systems by which multinational companies manage their subsidaries

The thesis begins with a conceptual model of the way that language diversity affects the strategies, organisation and subsidiary control policies of multinational companies. The model is based solely on the researcher'’ personal experience of working in a variety of international management roles, but in Chapter 2 a wide-ranging review of related academic literature finds evidence to support the key ideas. The model is developed as a series of propositions which are tested in a comparative case study, refined and then re-tested in a global survey of multinational subsidiaries. The principal findings of the empirical phases of the thesis endorse the main tenets of the model: - That language difference between parent and subsidiary will impair communication, create mistrust and impede relationship development. - That subsequently the feelings of uncertainty, suspicion and mistrust will influence the decisions taken by the parent company. - They will have heightened sensitivity to language issues and will implement policies to manage language differences. - They will adopt low-risk strategies in host countries where they are concerned about language difference. - They will use organisational and manpower strategies to minimise the consequences and risks of the communications problems with the subsidiary. - As a consequence the level of integration and knowledge flow between parent and subsidiary will be curtailed. - They will adopt styles of control that depend least on their ability to communicate with their subsidiary. Although there is adequate support for all of the above conclusions, on some key points the evidence of the Case Studies and Survey is contradictory. The thesis, therefore, closes with an agenda for further research that would address these inconsistencies.

Assessing the capability to acquire and absorb technology within the public sector in developing countries : the case of Kuwait

The aim of this research is to assess the acquisition and absorption technology capabilities of the public sector in developing countries, with specific focus on the State of Kuwait. The assessment process of these two capabilities was conducted using a model originally designed for the private sector. In addition, the research aims to propose a framework to enhance the technological capability of developing countries, as well as the performance of the public sector. To achieve these aims, an investigation of the technology process to three public ministries in Kuwait was conducted. The prime interest of this investigation was to evaluate the role of the transferred technology in enhancing the indigenous technological capability of the public sector. The research is based on a case study approach, comprising a main case study (Ministry of Electricity and Water) and three minor case studies. Based on the outcomes from an extensive literature review and the preliminary sectoral visits, the research question and four hypotheses were formulated. These hypotheses were then tested using interview-based survey and documentation. The findings of the research revealed the weakness of the acquisition and absorption technological capabilities of the public sector. Consequently, the public sector relies extensively on foreign contractors and expatriates to compensate for this weakness. Also, it was found that Kuwait Government has not taken the necessary measures to develop its technological capability. This research has proposed a framework which could lead, if properly managed, to the enhancement of indigenous capability. It has also proposed how to improve performance and productivity in the public sector. Finally, the findings suggest that the assessment model, with minor adjustment, is applicable to the public sector.

University-industry-relations - their role in technological innovation:the case of biotechnology in the UK

Biotechnology is one of a series of new `generic technologies' that have been identified by western governments as possessing stategic economic opportunities. In this thesis I examine the characteristics of the technology and the government policies that have been developed to both promote and exploit the underpinning scientific research for biotechnology. The approach I have taken involves an in-depth analysis of the role of university-industry research relations in the development of biotechnology. To this end I carried out a detailed survey of biotechnology companies in the UK on the nature of their interactions and objectives. Through individual case studies of the SERC and DTI club mechanisms in biotechnology, I provide a contemporary appraisal of the development of new mechanisms involving co-ordination and cooperation between industry, government and academia, established to couple state funded science and national economic development. The public policy implications of the club funding systems for science in the UK are examined.

The effects of varying forms and degrees of government intervention upon the effective competitiveness of UK small businesses

This doctoral thesis responds to the need for greater understanding of small businesses and their inherent unique problem-types. Integral to the investigation is the theme that for governments to effectively influence small business, a sound understanding of the factors they are seeking to influence is essential. Moreover, the study, in its recognition of the many shortcomings in management research and, in particular that the research methods and approaches adopted often fail to give adequate understanding of issues under study, attempts to develop an innovative and creative research approach. The aim thus being to produce, not only advances in small business management knowledge from the standpoints of government policy makers and `lq recipient small business, but also insights into future potential research method for the continued development of that knowledge. The origins of the methodology lay in the non-acceptance of traditional philosophical positions in epistemology and ontology, with a philosophical standpoint of internal realism underpinning the research. Internal realism presents the basis for the potential co-existence of qualitative and quantitative research strategy and underlines the crucial contributory role of research method in provision of ultimate factual status of the assertions of research findings. The concept of epistemological bootstrapping is thus used to develop a `lq partial research framework to foothold case study research, thereby avoiding limitations of objectivism and brute inductivism. The major insights and issues highlighted by the `lq bootstrap, guide the researcher around the participant case studies. A novel attempt at contextualist (linked multi-level and processual) analysis was attempted in the major in-depth case study, with two further cases playing a support role and contributing to a balanced emphasis of empirical research within the context of time constraints inherent within part-time research.

New technology, industrial relations and white collar trade unions : the case of the National and Local Government Officers Association

The decade since 1979 has seen the most rapid introduction of microelectronic technology in the workplace. In particular, the scope offered for the application of this new technology to the area of white collar work has meant that it is a sector where trade unions have been confronted with major challenges. However the application of this technology has also provided trade unions with opportunities for exerting influence to reshape traditional attitudes to both industrial relations and the nature of work. Recent academic research on the trade union response to the introduction of new technology at the workplace suggests that, despite the resources and apparent sophistication of modern trade unions, they have not in general been able to take advantage of the opportunities offered during this period of radical technological change,the argument being that this is due both to structural weaknesses and the inappropriateness of the system of collective bargaining where new technology issues are concerned. Despite the significance of the Public Sector in employment terms, research into the response of public sector white collar trade unions to technological change has been fairly limited. This thesis sets out the approach of the National and Local Government Officers Association (NALGO), the largest solely white collar union in the world with over three quarters of a million members employed in a wide range of public service industries. The thesis examines NALGO's response at national level and, through detailed case studies, at local level in respect of Local Government and Water Industry NALGO members. The response is then evaluated and conclusions drawn in terms of a framework based upon an assessment of the key factors relevant in judging the ability of NALGO to respond effectively to the challenges brought about by the technological revolution of the last ten years.

The application of monolayer studies in the understanding of liposomal formulations

The study of surfactant monolayers is certainly not a new technique, but the application of monolayer studies to elucidate controlling factors in liposome design remains an underutilised resource. Using a Langmuir-Blodgett trough, pure and mixed lipid monolayers can be investigated, both for their interactions within the monolayer, and for interfacial interactions with drugs in the aqueous sub-phase. Despite these monolayers effectively being only half a bilayer, with a flat rather than curved structure, information from these studies can be effectively translated into liposomal systems. Here we outline the background, general protocols and application of Langmuir studies with a focus on their application in liposomal systems. A range of case studies are discussed which show how the system can be used to support its application in the development of liposome drug delivery. Examples include investigations into the effect of cholesterol within the liposome bilayer, understanding effective lipid packaging within the bilayer to promote water soluble and poorly soluble drug retention, the effect of alkyl chain length on lipid packaging, and drug-monolayer electrostatic interactions that promote bilayer repackaging.

The growth and awareness of health and safety at work, 1780-1900

This thesis examines the growth and awareness of health and safety at work between 1780 and 1900. In this period the hazards at work were increased by the intensification of production brought about by the Industrial Revolution, and new risks to health arose from the wider range of toxic substances in use by manufacturing industry. There is discussion in the thesis of the extent to which the problems were identified in an age of short life expectancy and limited medical knowledge. The sources studied have been largely medical, governmental, trade and press reports. The emphasis is on the first effects seen and recommendations made, and where possible, the extent of the problem and the effectiveness of any preventative measures adopted and examined. There is discussion of the growing involvement of the Government in industrial health and safety. The subject is viewed in the light of modern thinking on industrial health but uses a classification appropriate to historical resources. Psychological and minor afflictions, neglected in the 19th century, are not considered. The available literature is reviewed in each section. Three detailed case studies conclude the thesis, two on the notoriously dangerous occupations of metal grinding and pottery, and one on occupational eye injuries. Each study is based on a different type of source material. The thesis overall shows that there was extensive concern for health and safety at work, but no systematic approach and only ad hoc implementation of preventative measures; and that the rate at which conditions improved varied between different industries and different categories of workers . However, some modern principles of health and safety at work can be seen emerging, and the period laid the necessary medical, technical and legal foundations for developments in the present century.