Generation of optical frequency combs in fibres:an optical pulse analysis

The innovation of optical frequency combs (OFCs) generated in passive mode-locked lasers has provided astronomy with unprecedented accuracy for wavelength calibration in high-resolution spectroscopy in research areas such as the discovery of exoplanets or the measurement of fundamental constants. The unique properties of OCFs, namely a highly dense spectrum of uniformly spaced emission lines of nearly equal intensity over the nominal wavelength range, is not only beneficial for high-resolution spectroscopy. Also in the low- to medium-resolution domain, the OFCs hold the promise to revolutionise the calibration techniques. Here, we present a novel method for generation of OFCs. As opposed to the mode-locked laser-based approach that can be complex, costly, and difficult to stabilise, we propose an all optical fibre-based system that is simple, compact, stable, and low-cost. Our system consists of three optical fibres where the first one is a conventional single-mode fibre, the second one is an erbium-doped fibre and the third one is a highly nonlinear low-dispersion fibre. The system is pumped by two equally intense continuous-wave (CW) lasers. To be able to control the quality and the bandwidth of the OFCs, it is crucial to understand how optical solitons arise out of the initial modulated CW field in the first fibre. Here, we numerically investigate the pulse evolution in the first fibre using the technique of the solitons radiation beat analysis. Having applied this technique, we realised that formation of higherorder solitons is supported in the low-energy region, whereas, in the high-energy region, Kuznetsov-Ma solitons appear.

Detection of signals corrupted by the combination of Gaussian and Non-Gaussian noise

The detection of signals in the presence of noise is one of the most basic and important problems encountered by communication engineers. Although the literature abounds with analyses of communications in Gaussian noise, relatively little work has appeared dealing with communications in non-Gaussian noise. In this thesis several digital communication systems disturbed by non-Gaussian noise are analysed. The thesis is divided into two main parts. In the first part, a filtered-Poisson impulse noise model is utilized to calulate error probability characteristics of a linear receiver operating in additive impulsive noise. Firstly the effect that non-Gaussian interference has on the performance of a receiver that has been optimized for Gaussian noise is determined. The factors affecting the choice of modulation scheme so as to minimize the deterimental effects of non-Gaussian noise are then discussed. In the second part, a new theoretical model of impulsive noise that fits well with the observed statistics of noise in radio channels below 100 MHz has been developed. This empirical noise model is applied to the detection of known signals in the presence of noise to determine the optimal receiver structure. The performance of such a detector has been assessed and is found to depend on the signal shape, the time-bandwidth product, as well as the signal-to-noise ratio. The optimal signal to minimize the probability of error of; the detector is determined. Attention is then turned to the problem of threshold detection. Detector structure, large sample performance and robustness against errors in the detector parameters are examined. Finally, estimators of such parameters as. the occurrence of an impulse and the parameters in an empirical noise model are developed for the case of an adaptive system with slowly varying conditions.

The emergence of knowledge exchange:an agent-based model of a software market

We investigate knowledge exchange among commercial organizations, the rationale behind it, and its effects on the market. Knowledge exchange is known to be beneficial for industry, but in order to explain it, authors have used high-level concepts like network effects, reputation, and trust. We attempt to formalize a plausible and elegant explanation of how and why companies adopt information exchange and why it benefits the market as a whole when this happens. This explanation is based on a multiagent model that simulates a market of software providers. Even though the model does not include any high-level concepts, information exchange naturally emerges during simulations as a successful profitable behavior. The conclusions reached by this agent-based analysis are twofold: 1) a straightforward set of assumptions is enough to give rise to exchange in a software market, and 2) knowledge exchange is shown to increase the efficiency of the market.

Electronic commerce adoption:a study of business-to-business practice in Saudi Arabia

Electronic commerce (e-commerce) has become an increasingly important initiative among organisations. The factors affecting adoption decisions have been well-documented, but there is a paucity of empirical studies that examine the adoption of e-commerce in developing economies in the Arab world. The aim of this study is to provide insights into the salient e-commerce adoption issues by focusing on Saudi Arabian businesses. Based on the Technology-Organisational-Environmental framework, an integrated research model was developed that explains the relative influence of 19 known determinants. A measurement scale was developed from prior empirical studies and revised based on feedback from the pilot study. Non-interactive adoption, interactive adoption and stabilisation of e-commerce adoption were empirically investigated using survey data collected from Saudi manufacturing and service companies. Multiple discriminant function analysis (MDFA) was used to analyse the data and research hypotheses. The analysis demonstrates that (1) regarding the non-interactive adoption of e-commerce, IT readiness, management team support, learning orientation, strategic orientation, pressure from business partner, regulatory and legal environment, technology consultants‘ participation and economic downturn are the most important factors, (2) when e-commerce interactive adoption is investigated, IT readiness, management team support, regulatory environment and technology consultants‘ participation emerge as the strongest drivers, (3) pressure from customers may not have much effect on the non-interactive adoption of e-commerce by companies, but does significantly influence the stabilisation of e-commerce use by firms, and (4) Saudi Arabia has a strong ICT infrastructure for supporting e-commerce practices. Taken together, these findings on the multi-dimensionality of e-commerce adoption show that non-interactive adoption, interactive adoption and stabilisation of e-commerce are not only different measures of e-commerce adoption, but also have different determinants. Findings from this study may be valuable for both policy and practice as it can offer a substantial understanding of the factors that enhance the widespread use of B2B e-commerce. Also, the integrated model provides a more comprehensive explanation of e-commerce adoption in organisations and could serve as a foundation for future research on information systems.

Multinationality-performance relationship:a meta-analysis

- We conduct a Meta-analysis of 54 papers that study the relationship between multinationality and firm performance. The aim is to understand if any systematic relationships exist between the characteristics of each study and the reported results of linear and curvilinear regressions to examine the multinationality-performance relationship. - Our main finding, robust to different specifications and to different weights for each observation, is that when analysis is based on non-US data, the reported return to multinationality is higher. However, this relationship for non-US firms is usually U-shaped rather than inverted U-shaped. This indicates that US firms face lower returns to internationalization than other firms but are less likely to incur losses in the early stages of internationalization. - The findings also highlight the differences that are reported when comparing regression and non-regression based techniques. Our results suggest that in this area regression based analysis is more reliable than say ANOVA or other related approaches. - Other characteristics that influence the estimated rate of return and its shape across different studies are: the measure of multinationality used; size distribution of the sample; and the use of market-based indicators to measure firm performance. Finally, we find no evidence of publication bias.

Acoustic emission detection using optical fibre sensors for aerospace applications

Structural Health Monitoring (SHM) ensures the structural health and safety of critical structures covering a wide range of application areas. This thesis presents novel, low-cost and good-performance fibre Bragg grating (FBG) based systems for detection of Acoustic Emission (AE) in aircraft structures, which is a part of SHM. Importantly a key aim, during the design of these systems, was to produce systems that were sufficiently small to install in an aircraft for lifetime monitoring. Two important techniques for monitoring high frequency AE that were developed as a part of this research were, Quadrature recombination technique and Active tracking technique. Active tracking technique was used extensively and was further developed to overcome the limitations that were observed while testing it at several test facilities and with different optical fibre sensors. This system was able to eliminate any low frequency spectrum shift due to environmental perturbation and keeps the sensor always working at optimum operation point. This is highly desirable in harsh industrial and operationally active environments. Experimental work carried out in the laboratory has proved that such systems can be used for high frequency detection and have capability to detect up to 600 kHz. However, the range of frequency depends upon the requirement and design of the interrogation system as the system can be altered accordingly for different applications. Several optical fibre configurations for wavelength detection were designed during the course of this work along with industrial partners. Fibre Bragg grating Fabry-Perot (FBG-FP) sensors have shown higher sensitivity and usability than the uniform FBGs to be used with such system. This was shown experimentally. The author is certain that further research will lead to development of a commercially marketable product and the use of active tracking systems can be extended in areas of healthcare, civil infrastructure monitoring etc. where it can be deployed. Finally, the AE detection system has been developed to aerospace requirements and was tested at NDT & Testing Technology test facility based at Airbus, Filton, UK on A350 testing panels.

Ultra-long mode-locked Er-droped fibre lasers

The development of ultra-long (UL) cavity (hundreds of meters to several kilometres) mode-locked fibre lasers for the generation of high-energy light pulses with relatively low (sub-megahertz) repetition rates has emerged as a new rapidly advancing area of laser physics. The first demonstration of high pulse energy laser of this type was followed by a number of publications from many research groups on long-cavity Ytterbium and Erbium lasers featuring a variety of configurations with rather different mode-locked operations. The substantial interest to this new approach is stimulated both by non-trivial underlying physics and by the potential of high pulse energy laser sources with unique parameters for a range of applications in industry, bio-medicine, metrology and telecommunications. It is well known, that pulse generation regimes in mode-locked fibre lasers are determined by the intra-cavity balance between the effects of dispersion and non-linearity, and the processes of energy attenuation and amplification. The highest per-pulse energy has been achieved in normal-dispersion UL fibre lasers mode-locked through nonlinear polarization evolution (NPE) for self-modelocking operation. In such lasers are generated the so-called dissipative optical solitons. The uncompensated net normal dispersion in long-cavity resonatorsusually leads to very high chirp and, consequently, to a relatively long duration of generated pulses. This thesis presents the results of research Er-doped ultra-long (more than 1 km cavity length) fibre lasers mode-locked based on NPE. The self-mode-locked erbium-based 3.5-km-long all-fiber laser with the 1.7 µJ pulse energy at a wavelength of 1.55 µm was developed as a part of this research. It has resulted in direct generation of short laser pulses with an ultralow repetition rate of 35.1 kHz. The laser cavity has net normal-dispersion and has been fabricated from commercially-available telecom fibers and optical-fiber elements. Its unconventional linear-ring design with compensation for polarization instability ensures high reliability of the self-mode-locking operation, despite the use of a non polarization-maintaining fibers. The single pulse generation regime in all-fibre erbium mode-locking laser based on NPE with a record cavity length of 25 km was demonstrated. Modelocked lasers with such a long cavity have never been studied before. Our result shows a feasibility of stable mode-locked operation even for an ultra-long cavity length. A new design of fibre laser cavity – “y-configuration”, that offers a range of new functionalities for optimization and stabilization of mode-locked lasing regimes was proposed. This novel cavity configuration has been successfully implemented into a long-cavity normal-dispersion self-mode-locked Er-fibre laser. In particular, it features compensation for polarization instability, suppression of ASE, reduction of pulse duration, prevention of in-cavity wave breaking, and stabilization of the lasing wavelength. This laser along with a specially designed double-pass EDFA have allowed us to demonstrate anenvironmentally stable all-fibre laser system able to deliver sub-nanosecond high-energy pulses with low level of ASE noise.

Emerging of human factor in risk analysis of home care service

Risk management in healthcare represents a group of various complex actions, implemented to improve the quality of healthcare services and guarantee the patients safety. Risks cannot be eliminated, but it can be controlled with different risk assessment methods derived from industrial applications and among these the Failure Mode Effect and Criticality Analysis (FMECA) is a largely used methodology. The main purpose of this work is the analysis of failure modes of the Home Care (HC) service provided by local healthcare unit of Naples (ASL NA1) to focus attention on human and non human factors according to the organization framework selected by WHO. © Springer International Publishing Switzerland 2014.

Statistical mechanics of low-density parity-check codes

We review recent theoretical progress on the statistical mechanics of error correcting codes, focusing on low-density parity-check (LDPC) codes in general, and on Gallager and MacKay-Neal codes in particular. By exploiting the relation between LDPC codes and Ising spin systems with multispin interactions, one can carry out a statistical mechanics based analysis that determines the practical and theoretical limitations of various code constructions, corresponding to dynamical and thermodynamical transitions, respectively, as well as the behaviour of error-exponents averaged over the corresponding code ensemble as a function of channel noise. We also contrast the results obtained using methods of statistical mechanics with those derived in the information theory literature, and show how these methods can be generalized to include other channel types and related communication problems.

Statistical mechanics of broadcast channels using low-density parity-check codes

We investigate the use of Gallager's low-density parity-check (LDPC) codes in a degraded broadcast channel, one of the fundamental models in network information theory. Combining linear codes is a standard technique in practical network communication schemes and is known to provide better performance than simple time sharing methods when algebraic codes are used. The statistical physics based analysis shows that the practical performance of the suggested method, achieved by employing the belief propagation algorithm, is superior to that of LDPC based time sharing codes while the best performance, when received transmissions are optimally decoded, is bounded by the time sharing limit.

Inventory parameter management and focused continuous improvement for repetitive batch manufacturers

What this thesis proposes is a methodology to assist repetitive batch manufacturers in the adoption of certain aspects of the Lean Production principles. The methodology concentrates on the reduction of inventory through the setting of appropriate batch sizes, taking account of the effect of sequence dependent set-ups and the identification and elimination of bottlenecks. It uses a simple Pareto and modified EBQ based analysis technique to allocate items to period order day classes based on a combination of each item's annual usage value and set-up cost. The period order day classes the items are allocated to are determined by the constraints limits in the three measured dimensions, capacity, administration and finance. The methodology overcomes the limitations associated with MRP in the area of sequence dependent set-ups, and provides a simple way of setting planning parameters taking this effect into account by concentrating on the reduction of inventory through the systematic identification and elimination of bottlenecks through set-up reduction processes, so allowing batch sizes to reduce. It aims to help traditional repetitive batch manufacturers in a route to continual improvement by: Highlighting those areas where change would bring the greatest benefits. Modelling the effect of proposed changes. Quantifying the benefits that could be gained through implementing the proposed changes. Simplifying the effort required to perform the modelling process. It concentrates on increasing flexibility through managed inventory reduction through rationally decreasing batch sizes, taking account of sequence dependent set-ups and the identification and elimination of bottlenecks. This was achieved through the development of a software modelling tool, and validated through a case study approach.

Three-factor models versus time series models:quantifying time-dependencies of interactions between stimuli in cell biology and psychobiology for short longitudinal data

Signal integration determines cell fate on the cellular level, affects cognitive processes and affective responses on the behavioural level, and is likely to be involved in psychoneurobiological processes underlying mood disorders. Interactions between stimuli may subjected to time effects. Time-dependencies of interactions between stimuli typically lead to complex cell responses and complex responses on the behavioural level. We show that both three-factor models and time series models can be used to uncover such time-dependencies. However, we argue that for short longitudinal data the three factor modelling approach is more suitable. In order to illustrate both approaches, we re-analysed previously published short longitudinal data sets. We found that in human embryonic kidney 293 cells cells the interaction effect in the regulation of extracellular signal-regulated kinase (ERK) 1 signalling activation by insulin and epidermal growth factor is subjected to a time effect and dramatically decays at peak values of ERK activation. In contrast, we found that the interaction effect induced by hypoxia and tumour necrosis factor-alpha for the transcriptional activity of the human cyclo-oxygenase-2 promoter in HEK293 cells is time invariant at least in the first 12-h time window after stimulation. Furthermore, we applied the three-factor model to previously reported animal studies. In these studies, memory storage was found to be subjected to an interaction effect of the beta-adrenoceptor agonist clenbuterol and certain antagonists acting on the alpha-1-adrenoceptor / glucocorticoid-receptor system. Our model-based analysis suggests that only if the antagonist drug is administer in a critical time window, then the interaction effect is relevant.

Do many hands make light work? How to overcome social loafing and gain motivation in work teams

Purpose – The purpose of this paper is to challenge the assumption that process losses of individuals working in teams are unavoidable. The paper aims to challenge this assumption on the basis of social identity theory and recent research. Design/methodology/approach – The approach adopted in this paper is to review the mainstream literature providing strong evidence for motivation problems of individuals working in groups. Based on more recent literature, innovative ways to overcome these problems are discussed. Findings – A social identity-based analysis and recent findings summarized in this paper show that social loafing can be overcome and that even motivation gains in group work can be expected when groups are important for the individual group members' self-concepts. Practical implications – The paper provides human resource professionals and front-line managers with suggestions as to how individual motivation and performance might be increased when working in teams. Originality/value – The paper contributes to the literature by challenging the existing approach to reducing social loafing, i.e. individualizing workers as much as possible, and proposes a team-based approach instead to overcome motivation problems.

Optical in-fiber Bragg grating sensor systems for medical applications

Two in-fiber Bragg grating (FBG) temperature sensor systems for medical applications are demonstrated: (1) an FBG flow-directed thermodilution catheter based on interferometric detection of wavelength shift that is used for cardiac monitoring; and (2) an FBG sensor system with a tunable Fabry-Perot filter for in vivo temperature profiling in nuclear magnetic resonance (NMR) machines. Preliminary results show that the FBG sensor is in good agreement with electrical sensors that are widely used in practice. A field test shows that the FBG sensor system is suitable for in situ temperature profiling in NMR machines for medical applications.

Selling, resistance and reconciliation:a critical discursive approach to subsidiary role evolution in MNEs

Studies of political dynamics between multinational enterprise (MNE) parents and subsidiaries during subsidiary role evolution have focused largely on control and resistance. This paper adopts a critical discursive approach to enable an exploration of subtle dynamics in the way that both headquarters and subsidiaries subjectively reconstruct their independent-interdependent relationships with each other during change. We draw from a real-time qualitative study of a revealing case of charter change in an important European subsidiary of an MNE attempting to build closer integration across European country operations. Our results illustrate the role of three discourses – selling, resistance and reconciliation – in the reconstruction of the subsidiary–parent relationship. From this analysis we develop a process framework that elucidates the important role of these three discourses in the reconstruction of subsidiary roles, showing how resistance is not simply subversive but an important part of integration. Our findings contribute to a better understanding of the micro-level political dynamics in subsidiary role evolution, and of how voice is exercised in MNEs. This study also provides a rare example of discourse-based analysis in an MNE context, advancing our knowledge of how discursive methods can help to advance international business research more generally.