Managing innovative manufacturing

Editorial: The Managing Innovative Manufacturing (MIM) conference series started in 1993 in the UK. The first MIM conference was held at Keele University and, as from the second MIM at Leicester University in 1996, it became a biennial event with the University of Nottingham and Aston University hosting, respectively, the third and fourth conferences. The main areas of interest of the MIM conference series are: Manufacturing Strategy; Technology & Innovation Management; Human Resource Management; Organisation of Work; Product Design; Operations Planning and Control; Supply Chain Management; Performance Management. This special issue of the International Journal of Technology Management is based on selected papers from MIM2000 at Aston University, where it was organised by Aston Business School. The special theme of the Aston conference was Responsive Production and the Agile Enterprise. Altogether 82 papers were presented in parallel sessions. The eight papers included here were selected from the ‘Technology and Innovation’ stream. They have all been independently reviewed and revised before being accepted for publication. The authors of these papers are from the UK, Ireland, Turkey, the USA, the Netherlands and Hong Kong. They address a wide range of issues within the overall scope of Technology and Innovation with some papers having a geographical or sector focus and others being more general in nature. Participation in the MIM conferences has become increasingly international and to reflect this, the 2002 event is leaving the UK and being held at the University of Wisconsin-Milwaukee, in the USA. It is planned to hold the following MIM at the University of Aalborg, Denmark, in 2004.

Production and operations managers and logistics managers: a cross-country comparison

Purpose – The purpose of this paper is to explore the contribution of production and operations managers (POMs) and logistics managers (LMs) in improving manufacturing and service operations, comparing experiences in Australia and Britain. Design/methodology/approach – The findings are based on surveys of the two occupations in the two countries. Thus, the focus is on comparing and contrasting two strategically placed occupations within the supply chain and in two traditional manufacturing economies in developed countries, in opposing hemispheres of the world. Findings – The working lives of 254 Australian and 195 British POMs and 303 Australian and 168 British LMs are explored to see how well prepared they are for the business challenges of today, whether they see the need for changes in the ways in which they work and what satisfactions they derive from their worlds of work? Practical implications – Insights are provided for senior management into the deployment and personal and professional development needs of two key occupations within supply chain management. Originality/value – The findings from the research give fresh insights into the ways in which managers in the two areas of responsibilities in the two countries.view their worlds of work.

A configuration framework of manufacturing strategy paradigm in state owned enterprises within China's petrochemical industry:building context-embedded configurations for the paradigm of strategic manufacturing management from exploratory case studies

The role of the production system as a key determinant of competitive performance of business operations- has long been the subject of industrial organization research, even predating the .explicit conceptua1isation of manufacturing, strategy in the literature. Particular emergent production issues such as the globalisation of production, global supply chain management, management of integrated manufacturing and a growing e~busjness environment are expected to critically influence the overall competitive performance and therefore the strategic success of the organization. More than ever, there is a critical need to configure and improve production system and operations competence in a strategic way so as to contribute to the long-term competitiveness of the organization. In order to operate competitively and profitably, manufacturing companies, no matter how well managed, all need a long-term 'strategic direction' for the development of operations competence in order to consistently produce more market value with less cost towards a leadership position. As to the long-term competitiveness, it is more important to establish a dynamic 'strategic perspective' for continuous operational improvements in pursuit of this direction, as well as ongoing reviews of the direction in relation to the overall operating context. However, it also clear that the 'existing paradigm of manufacturing strategy development' is incapable of adequately responding to the increasing complexities and variations of contemporary business operations. This has been factually reflected as many manufacturing companies are finding that methodologies advocated in the existing paradigm for developing manufacturing strategy have very limited scale and scope for contextual contingency in empirical application. More importantly, there has also emerged a deficiency in the multidimensional and integrative profile from a theoretical perspective when operationalising the underlying concept of strategic manufacturing management established in the literature. The point of departure for this study was a recognition of such contextual and unitary limitations in the existing paradigm of manufacturing strategy development when applied to contemporary industrial organizations in general, and Chinese State Owned Enterprises (SOEs) in particular. As China gradually becomes integrated into the world economy, the relevance of Western management theory and its paradigm becomes a practical matter as much as a theoretical issue. Since China markedly differs from Western countries in terms of culture, society, and political and economic systems, it presents promising grounds to test and refine existing management theories and paradigms with greater contextual contingency and wider theoretical perspective. Under China's ongoing programmes of SOE reform, there has been an increased recognition that strategy development is the very essence of the management task for managers of manufacturing companies in the same way as it is for their counterparts in Western economies. However, the Western paradigm often displays a rather naive and unitary perspective of the nature of strategic management decision-making, one which largely overlooks context-embedded factors and social/political influences on the development of manufacturing strategy. This thesis studies the successful experiences of developing manufacturing strategy from five high-performing large-scale SOEs within China’s petrochemical industry. China’s petrochemical industry constitutes a basic heavy industrial sector, which has always been a strategic focus for reform and development by the Chinese government. Using a confirmation approach, the study has focused on exploring and conceptualising the empirical paradigm of manufacturing strategy development practiced by management. That is examining the ‘empirical specifics’ and surfacing the ‘managerial perceptions’ of content configuration, context of consideration, and process organization for developing a manufacturing strategy during the practice. The research investigation adopts a qualitative exploratory case study methodology with a semi-structural front-end research design. Data collection follows a longitudinal and multiple-case design and triangulates case evidence from sources including qualitative interviews, direct observation, and a search of documentations and archival records. Data analysis follows an investigative progression from a within-case preliminary interpretation of facts to a cross-case search for patterns through theoretical comparison and analytical generalization. The underlying conceptions in both the literature of manufacturing strategy and related studies in business strategy were used to develop theoretical framework and analytical templates applied during data collection and analysis. The thesis makes both empirical and theoretical contributions to our understanding of 'contemporary management paradigm of manufacturing strategy development'. First, it provides a valuable contextual contingency of the 'subject' using the business setting of China's SOEs in petrochemical industry. This has been unpacked into empirical configurations developed for its context of consideration, its content and process respectively. Of special note, a lean paradigm of business operations and production management discovered at case companies has significant implications as an emerging alternative for high-volume capital intensive state manufacturing in China. Second, it provides a multidimensional and integrative theoretical profile of the 'subject' based upon managerial perspectives conceptualised at case companies when operationalising manufacturing strategy. This has been unpacked into conceptual frameworks developed for its context of consideration, its content constructs, and its process patterns respectively. Notably, a synergies perspective towards the operating context, competitive priorities and competence development of business operations and production management has significant implications for implementing a lean manufacturing paradigm. As a whole, in so doing, the thesis established a theoretical platform for future refinement and development of context-specific methodologies for developing manufacturing strategy.

Computer integrated manufacturing control

Many manufacturing companies have long endured the problems associated with the presence of `islands of automation'. Due to rapid computerisation, `islands' such as Computer-Aided Design (CAD), Computer-Aided Manufacturing (CAM), Flexible Manufacturing Systems (FMS) and Material Requirement Planning (MRP), have emerged, and with a lack of co-ordination, often lead to inefficient performance of the overall system. The main objective of Computer-Integrated Manufacturing (CIM) technology is to form a cohesive network between these islands. Unfortunately, a commonly used approach - the centralised system approach, has imposed major technical constraints and design complication on development strategies. As a consequence, small companies have experienced difficulties in participating in CIM technology. The research described in this thesis has aimed to examine alternative approaches to CIM system design. Through research and experimentation, the cellular system approach, which has existed in the form of manufacturing layouts, has been found to simplify the complexity of an integrated manufacturing system, leading to better control and far higher system flexibility. Based on the cellular principle, some central management functions have also been distributed to smaller cells within the system. This concept is known, specifically, as distributed planning and control. Through the development of an embryo cellular CIM system, the influence of both the cellular principle and the distribution methodology have been evaluated. Based on the evidence obtained, it has been concluded that distributed planning and control methodology can greatly enhance cellular features within an integrated system. Both the cellular system approach and the distributed control concept will therefore make significant contributions to the design of future CIM systems, particularly systems designed with respect to small company requirements.

The development and diffusion of industrial robots

This thesis describes the history of robots and explains the reasons for the international differences in robot diffusion, and the differences in the diffusion of various robot applications with reference to the UK. As opposed to most of the literature, diffusion is examined with an integrated and interdisciplinary perspective. Robot technology evolves from the interaction of development, supply and manufacture, adoption, and promotion. activities. Emphasis is given to the analysis of adoption, at present the most important limiting factor of robot advancement in the UK. Technical development is inferred from a comparison of surveys on equipment, and from the topics of ten years of symposia papers. This classification of papers is also used to highlight the international and institutional differences in robot development. Analysis of the growth in robot supply, manufacture, and use is made from statistics compiled. A series of interviews with users and potential users serves to illustrate the factors and implications of the adoption of different robot systems in the UK. Adoption pioneering takes place when several conditions exist: when the technology is compatible with the firm, when its advantages outweigh its disadvantages, and particularly when a climate exists which encourages the managerial involvement and the labour acceptance. The degree of compatibility (technical, methodological, organisational, and economic) and the consequences (profitability, labour impacts, and managerial effects) of different robot systems (transfer, manipulative, processing, and assembly) are determined by various aspects of manufacturing operations (complexity, automation, integration, labour tasks, and working conditions). The climate for adoption pioneering is basically determined by the performance of firms. The firms' policies on capital investment have as decisive a role in determining the profitability of robots as their total labour costs. The performance of the motor car industry and its machine builders explains, more than any other factor, the present state of robot advancement in the UK.

Lubrication efficiency and die design in wire drawing

With the competitive challenge facing business today, the need to keep cost down and quality up is a matter of survival. One way in which wire manufacturers can meet this challenge is to possess a thorough understanding of deformation, friction and lubrication during the wire drawing process, and therefore to make good decisions regarding the selection and application of lubricants as well as the die design. Friction, lubrication and die design during wire drawing thus become the subject of this study. Although theoretical and experimental investigations have been being carried out ever since the establishment of wire drawing technology, many problems remain unsolved. It is therefore necessary to conduct further research on traditional and fundamental subjects such as the mechanics of deformation, friction, lubrication and die design in wire drawing. Drawing experiments were carried out on an existing bull-block under different cross-sectional area reductions, different speeds and different lubricants. The instrumentation to measure drawing load and drawing speed was set up and connected to the wire drawing machine, together with a data acquisition system. A die box connected to the existing die holder for using dry soap lubricant was designed and tested. The experimental results in terms of drawing stress vs percentage area reduction curves under different drawing conditions were analysed and compared. The effects on drawing stress of friction, lubrication, drawing speed and pressure die nozzle are discussed. In order to determine the flow stress of the material during deformation, tensile tests were performed on an Instron universal test machine, using the wires drawn under different area reductions. A polynomial function is used to correlate the flow stress of the material with the plastic strain, on which a general computer program has been written to find out the coefficients of the stress-strain function. The residual lubricant film on the steel wire after drawing was examined both radially and longitudinally using an SEM and optical microscope. The lubricant film on the drawn wire was clearly observed. Therefore, the micro-analysis by SEM provides a way of friction and lubrication assessment in wire drawing.

Servitization of manufacturing

The servicisation agenda is arguably one of the most important facing western manufacturers. In a world of severe international competition, it can be the basis of distinct competitive advantage, and a means to differentiate a company's products from goods produced in low cost economies. The concept of Product Service Systems (PSS) is, in particular, a special case of servicisation. With PSS, the market proposition is designed as a system that exploits synergies between products and services while, at the same time, seeks to reduce the economic and environmental costs of delivery. Although key to sustaining western manufacturing operations, major issues arise with design and management of engineering, manufacturing and supply chain activities for successful implementation of such a service-led competitive strategy. This session includes presentations which examine the opportunities and challenges associated with servicisation in more detail.

Evolving forms of manufacturing strategy development:evidence and implications

This paper outlines, using evidence from several case studies, the use of alternative forms of manufacturing strategy processes. Our investigation shows that the manufacturing strategy development practices of manufacturers are evolving in many directions; we found several alternatives to the formal top-down planning process. Manufacturers use one or more of the following alternatives with or without the top-down manufacturing strategy process: a coherent pattern of actions; manufacturing/process improvement programs; or the pursuit of core manufacturing capabilities. It appears that the various manufacturing strategy development processes may be tied to the strategic role of manufacturing in a company. This paper offers a framework that captures the relationship between the strategic role of manufacturing and the process of manufacturing strategy development. An in-depth case from a UK company illustrates the evolving forms of manufacturing strategy development processes.

Capabilities and competitiveness of Chinese state owned manufacturing enterprises:what has been learned over 20 years and what remains to be learned

Technological capabilities in Chinese manufacturing have been transformed in the last three decades. However, the extent to which and how domestic market oriented state owned enterprises (SOEs) have developed their capabilities remain important questions. The East Asian latecomer model has been adapted to study six Chinese SOEs in the automotive, steel and machine tools sectors to assess capability levels attained and the role of external sources and internal efforts in developing them. All six enterprises demonstrate high competence in operating established technology, managing investment and making product and process improvements but differ in innovative capability. While the East Asian latecomer model in which linking, leveraging and learning explain technological capability development is relevant for the companies studied, it needs to be adapted for Chinese SOEs to take account of types of external links and leverage of enterprises, the role of government, enterprise level management motives and means of financing development.

Quality management and performance:a comparison between the UK and Turkey

Purpose: The aim of this article is to detail the correlation between quality management, specifically its tools and critical success factors, and performance in terms of primary operational and secondary organisational performances. Design/methodology/approach: Survey data from the UK and Turkey were analysed using exploratory factor analyses, structural equation modelling and regression analysis. Findings: The results show that quality management has a significant and positive impact on both primary and secondary performances; that Turkish and UK attitudes to quality management are similar; and that quality management is widely practised in manufacturing and service industries but has more statistical emphasis in the manufacturing sector. The main challenge for making quality management practice more effective lies in an appropriate balanced use of the different sorts of the tools and critical success factors. Originality/value: This study takes a novel approach by: (i) exploring the relationship between primary operational and secondary organisational performances, (ii) using service and manufacturing data and (iii) making a cross-country comparison between the UK (a developed economy) and Turkey (a developing economy). Limitations: Detailed contrast provided between only two countries. © 2013 Copyright Taylor and Francis Group, LLC.

Modularity and industrial complexes:perspectives for green operations in the automotive industry

This paper discusses the possible contributions from modularity and industrial condominiums towards enhancing environmental performance in the automotive industry. The research described in this study is underpinned by a review of journal articles and books on the topics of: modularity of production systems; green operations practices, and the automotive industry and sustainability. The methodology is based on theoretical analysis of the contribution of the modular production system characteristics used in the automotive industry for Green Operations Practices (GOP). The following GOPs were considered: green buildings, eco design, green supply chains, greener manufacturing, and reverse logistics. The results are theoretical in nature; however, due to the small number of studies that investigate the relationship between modularity and sustainability, this work is relevant to increase knowledge in academic circles and among practitioners in order to understand the possible environmental benefits from modular production systems.

The servitization of manufacturing:a systematic literature review of interdependent trends

Purpose: The servitization of manufacturing is a diverse and complex field of research interest. The purpose of this paper is to provide an integrative and organising lens for viewing the various contributions to knowledge production from those research communities addressing servitization. To achieve this, the paper aims to set out to address two principal questions, namely where are the knowledge stocks and flows amongst the research communities? And what are generic research concerns being addressed by these communities? Design/methodology/approach: Using an evidenced-based approach, the authors have performed a systematic review of the research literature associated with the servitization of manufacturing. This investigation incorporates a descriptive and thematic analysis of 148 academic and scholarly papers from 103 different lead authors in 68 international peer-reviewed journals. Findings: The work proposes support for the existence of distinct researcher communities, namely services marketing, service management, operations management, product-service systems and service science management and engineering, which are contributing to knowledge production in the servitization of manufacturing. Knowledge stocks within all communities associated with research in the servitization of manufacturing have dramatically increased since the mid-1990s. The trends clearly reveal that the operations community is in receipt of the majority of citations relating to the servitization of manufacturing. In terms of knowledge flows, it is apparent that the more mature communities are drawing on more locally produced knowledge stocks, whereas the emergent communities are drawing on a knowledge base more evenly distributed across all the communities. The results are indicative of varying degrees of interdependency amongst the communities. The generic research concerns being addressed within the communities are associated with the concepts of product-service differentiation, competitive strategy, customer value, customer relationships and product-service configuration. Originality/value: This research has further developed and articulated the identities of distinct researcher communities actively contributing to knowledge production in the servitization of manufacturing, and to what extent they are pursuing common research agendas. This study provides an improved descriptive and thematic awareness of the resulting body of knowledge, allowing the field of servitization to progress in a more informed and multidisciplinary fashion. © Emerald Group Publishing Limited.

Design and designing:a critical introduction

Design and Designing provides a broad and critical understanding of what is essentially a practical subject. Designing today is less a craft and more a part of the knowledge economy. It's all about knowing how to acquire knowledge and how to apply it creatively. Design and Designing covers the design process, modelling and drawing, working with clients, production and consumption, sustainability, professional practice and design futures. Chapters are written by expert teachers and practitioners from around the globe, each presenting an accessible and engaging overview of their field of design. Every chapter is highly illustrated with a combination of images and information boxes, which extend or highlight key material. Each section concludes with a design project, a hands-on activity for the reader. Design and Designing covers the full spectrum of design types, from graphic communication to product design, from fashion to games design, setting every type in its aesthetic, ethical and social contexts. With this essential book, readers will learn from today's best practice and best thinking in design, they will develop a critical sense, and become the designers of tomorrow.

High-throughput manufacturing of size-tuned liposomes by a new microfluidics method using enhanced statistical tools for characterization

Microfluidics has recently emerged as a new method of manufacturing liposomes, which allows for reproducible mixing in miliseconds on the nanoliter scale. Here we investigate microfluidics-based manufacturing of liposomes. The aim of these studies was to assess the parameters in a microfluidic process by varying the total flow rate (TFR) and the flow rate ratio (FRR) of the solvent and aqueous phases. Design of experiment and multivariate data analysis were used for increased process understanding and development of predictive and correlative models. High FRR lead to the bottom-up synthesis of liposomes, with a strong correlation with vesicle size, demonstrating the ability to in-process control liposomes size; the resulting liposome size correlated with the FRR in the microfluidics process, with liposomes of 50 nm being reproducibly manufactured. Furthermore, we demonstrate the potential of a high throughput manufacturing of liposomes using microfluidics with a four-fold increase in the volumetric flow rate, maintaining liposome characteristics. The efficacy of these liposomes was demonstrated in transfection studies and was modelled using predictive modeling. Mathematical modelling identified FRR as the key variable in the microfluidic process, with the highest impact on liposome size, polydispersity and transfection efficiency. This study demonstrates microfluidics as a robust and high-throughput method for the scalable and highly reproducible manufacture of size-controlled liposomes. Furthermore, the application of statistically based process control increases understanding and allows for the generation of a design-space for controlled particle characteristics.

Intellectual property activity by service sector and manufacturing firms in the United Kingdom, 1996-2000

This paper provides evidence from a newly constructed database of UK firms about the extent of their intellectual property acquisition activities over five years. We focus on service sector firms, which have not previously been studied, with comparisons for firms in manufacturing and other sectors, such as agriculture. The measures of IP include both trade marks, which are most important in services, and patents, which are predominantly sought by manufacturing firms. The analysis includes patents and trade marks applied for via both the UK and European routes. While IP assets sought through the UK Patent Office remained strong, more services firms were seeking European Community trade marks and more manufacturing firms were seeking patents via European Patent Office through time. Firm characteristics that are positively correlated with IP activity include larger firm size, stock market listed status and high product market diversification.