Stabilisation of polypropylene using polymer-bound antioxidants

variety of hindered phenol and hindered piperidine antioxidants containing vinyl or vinylidine functional groups have been synthesised and some of these were successfully bound to Polypropylene backbone during processing operations in presence of a radical generator. Up to 20% concentrates were prepared using this technique. Commercially acceptable concentrates (MASTERBATCHES) can only be prepared with antioxidants that are only weakly chain breaking such as hindered piperidines. One of the antioxidants, AATP was found to polymrise as well as bind to Polypropylene. Bound antioxidants were found to be resistant to such channels of physical loss as solvent extraction. Temperature and concentration of the additive and radical generator were found to be important parameters in the preparation of the concentrates. The stabilising efficiences of the diluted bound antioxidants alone, and in combination (synergistic) with other antioxidants have been evaluated. Results of both thermal and photo-oxidative stabilities of the bound samples in Polypropylene show that the restriction on free mobility of the bound antioxidants in the polymer has virtually no effect on its stabilising efficiency. Bound AATP was found to generate nitroxyl radicals during the course of its stabilising activities, and in combination with a small amount of Irganox 1076, it was shown to be highly synergistic thermally. A mechanism of catalytic phenol regeneration by the resultant piperidine hydroxylamine was proposed. Although the mechanical properties of the masterbatches were affected by the transformation, this was not found to be carried over to the diluted samples. This work has shown that bound concentrates can be effectively prepared in saturated polymers for subsequent dilution to normal concentrates used in commercial stabilisation.

The operation of repair in L2 learner conversation, group work and classroom discourse

The present study is an empirical investigation into repair in spoken discourse, specifically focusing on L2 learner conversation, group work and teacher-fronted classroom interaction. The core of the investigation concentrates on identification of the problem type, classification of repair strategies and examination of interaction in the repair process. A comparison between Conversation (CS), Group Work (GW), and Teacher-fronted classroom interaction (CR) suggests that more repair is undertaken in CS. The results of the study suggest that the fundamental differences between CS, GW and CR are of two types: in the frequency of repair and in the nature of the repair itself. It has been found that other-initiation for production problem repair occurs mainly in CR, other-completion is characteristic of GW and self-repair is most frequent in CS. Factors affecting the occurrence of repair in CS, GW and CR are related to content and social and communicative features of context. Importantly, the study shows the frequency of repair in GW falls between that of CS and CR in most of repair strategies. This result lends support to the argument that group work can assist L2 learners to develop their communicative competence. It is suggested that the analysis of the repair process in CS, GW and CR can be useful in throwing light on the intricacies of spoken discourse in general and can be exploited by applied linguists for both theoretical and pedagogical purposes.

A production planning system for plastic footwear in a seasonal market

Modern injection-moulding machinery which produces several, pairs of plastic footwear at a time brought increased production planning problems to a factory. The demand for its footwear is seasonal but the company's manning policy keeps a fairly constant production level thus determining the aggregate stock. Production planning must therefore be done within the limitations of a specified total stock. The thesis proposes a new production planning system with four subsystems. These are sales forecasting, resource planning, and two levels of production scheduling: (a) aggregate decisions concerning the 'manufacturing group' (group of products) to be produced in each machine each week, and (b) detailed decisions concerning the products within a manufacturing group to be scheduled into each mould-place. The detailed scheduling is least dependent on improvements elsewhere so the sub-systems were tackled in reverse order. The thesis concentrates on the production scheduling sub-systems which will provide most. of the benefits. The aggregate scheduling solution depends principally on the aggregate stocks of each manufacturing group and their division into 'safety stocks' (to prevent shortages) and 'freestocks' (to permit batch production). The problem is too complex for exact solution but a good heuristic solution, which has yet to be implemented, is provided by minimising graphically immediate plus expected future costs. The detailed problem splits into determining the optimal safety stocks and batch quantities given the appropriate aggregate stocks. It.is found that the optimal safety stocks are proportional to the demand. The ideal batch quantities are based on a modified, formula for the Economic Batch Quantity and the product schedule is created week by week using a priority system which schedules to minimise expected future costs. This algorithm performs almost optimally. The detailed scheduling solution was implemented and achieved the target savings for the whole project in favourable circumstances. Future plans include full implementation.

Multinational firms, productivity and employment

Over the last three decades foreign direct investment (FDI) has become the most visible driver of globalisation. It has grown faster than world output and international trade and now reports world annual flows exceeding 1,000 billion US dollars. In this period, Germany has undergone significant changes in order to play an important role in the globalisation process. Apart from being a member state of the European Union (EU) whose key feature is the free flow of trade, investment and labour, the re-unification of East and West Germany in 1990 has been a significant development. This in effect has meant that East Germany as well as other Eastern European nations opened up to foreign investment for the first time. In this period, Germany has attracted in excess of 10 per cent of inward FDI into the EU and invested around 15 per cent of all FDI in the EU. This thesis explores empirically the potential impact of FDI on firms operating in and investing from Germany over a ten year period. Using panel data at the firm-level it concentrates on three areas relating to FDI. Firstly, it considers whether foreign-owned firms are more productive than German multinational firms and German non-multinational firms. Secondly, the thesis considers the impact of German investments abroad on domestic productivity. Finally, employment effects emanating from outward high-tech FDI are estimated for the leading OECD (Organisation of Economic Co-operation and Development) countries, namely Germany, Belgium, France, the Netherlands, Sweden, the United Kingdom and Japan. The findings of the first analysis indicate that while foreign-owned firms are generally more productive than German non-multinationals, there is no clear cut difference between foreign-owned firms and German multinationals. These differences would not have been uncovered, had the analysis compared foreign firms with all domestic firms. Equally, location within Germany is also important, as this productivity gap is more pronounced for firms which are located in the Eastern states. The findings of the second analysis suggest that engaging in outward FDI has an overall positive effect on the parent firm's productivity at home. Finally, results of the third analysis show that an expansion of high-tech offshoring activities by OECD multinationals (MNEs) is not associated with any reduction in employment at home.

Missed opportunities:the WTO trade policy review for the East African community

The East African Community (EAC), comprising Kenya, Tanzania and Uganda, came into force on 7 July 2000 with a Common External Tariff (CET) established in January 2005. This Trade Policy Review (TPR) of the EAC is timely as all three countries had implemented significant trade liberalisation since the late 1980s while the CET represented an asymmetric change – Kenya and Tanzania essentially reduced tariffs whereas Uganda increased tariffs. The TPR provides considerable information on the CET and on trade and related policies in each of the member countries. However, the EAC and the TPR missed a number of opportunities: the EAC included no coordinated export promotion or investment provisions, while the TPR says little on the potential for intra-regional trade, and nor does it address the position of the EAC in the economic partnership agreements (EPAs) being negotiated with the EU. This review concentrates on these omissions to explore the implications of the EAC for developments in trade policy in the region.

Effects of rare-earth co-doping on the local structure of rare-earth phosphate glasses using high and low energy X-ray diffraction

Rare-earth co-doping in inorganic materials has a long-held tradition of facilitating highly desirable optoelectronic properties for their application to the laser industry. This study concentrates specifically on rare-earth phosphate glasses, (R2O3)x(R'2O3)y(P2O5)1-(x+y), where (R, R') denotes (Ce, Er) or (La, Nd) co-doping and the total rare-earth composition corresponds to a range between metaphosphate, RP3O9, and ultraphosphate, RP5O14. Thereupon, the effects of rare-earth co-doping on the local structure are assessed at the atomic level. Pair-distribution function analysis of high-energy X-ray diffraction data (Qmax = 28 Å-1) is employed to make this assessment. Results reveal a stark structural invariance to rare-earth co-doping which bears testament to the open-framework and rigid nature of these glasses. A range of desirable attributes of these glasses unfold from this finding; in particular, a structural simplicity that will enable facile molecular engineering of rare-earth phosphate glasses with 'dial-up' lasing properties. When considered together with other factors, this finding also demonstrates additional prospects for these co-doped rare-earth phosphate glasses in nuclear waste storage applications. This study also reveals, for the first time, the ability to distinguish between P-O and PO bonding in these rare-earth phosphate glasses from X-ray diffraction data in a fully quantitative manner. Complementary analysis of high-energy X-ray diffraction data on single rare-earth phosphate glasses of similar rare-earth composition to the co-doped materials is also presented in this context. In a technical sense, all high-energy X-ray diffraction data on these glasses are compared with analogous low-energy diffraction data; their salient differences reveal distinct advantages of high-energy X-ray diffraction data for the study of amorphous materials. © 2013 The Owner Societies.

The absence of corporate social responsibility reporting in Bangladesh

This paper aims to broaden the present corporate social responsibility (CSR) reporting literature by extending its focus to the absence of CSR reporting within a developing country, an area which, to date, is relatively under researched in comparison to the more widely studied presence of CSR reporting within developed Western countries. In particular this paper concentrates upon the lack of disclosure on three particular eco-justice issues: child labour, equal opportunities and poverty alleviation. We examine why this is the case and thereby illuminate underlying motives behind corporate unwillingness to address these issues. For this purpose, 23 semi-structured interviews were undertaken with senior corporate managers in Bangladesh. The findings suggest that the main reasons for non-disclosure include lack of resources, the profit imperative, lack of legal requirements, lack of knowledge/awareness, poor performance and the fear of bad publicity. Given these findings the paper raises some serious concerns as to why corporations would ever be expected to voluntarily report on eco-justice issues where performance is poor and negative publicity would be generated and profit impaired. Further research is still required to uncover current injustices and to imagine what changes can be made.

Integration of semantically annotated data by the KnoFuss architecture

Most of the existing work on information integration in the Semantic Web concentrates on resolving schema-level problems. Specific issues of data-level integration (instance coreferencing, conflict resolution, handling uncertainty) are usually tackled by applying the same techniques as for ontology schema matching or by reusing the solutions produced in the database domain. However, data structured according to OWL ontologies has its specific features: e.g., the classes are organized into a hierarchy, the properties are inherited, data constraints differ from those defined by database schema. This paper describes how these features are exploited in our architecture KnoFuss, designed to support data-level integration of semantic annotations.

Desalination of brackish water by a batch reverse osmosis desalink system for use with solar thermal energy

For remote, semi-arid areas, brackish groundwater (BW) desalination powered by solar energy may serve as the most technically and economically viable means to alleviate the water stresses. For such systems, high recovery ratio is desired because of the technical and economical difficulties of concentrate management. It has been demonstrated that the current, conventional solar reverse osmosis (RO) desalination can be improved by 40–200 times by eliminating unnecessary energy losses. In this work, a batch-RO system that can be powered by a thermal Rankine cycle has been developed. By directly recycling high pressure concentrates and by using a linkage connection to provide increasing feed pressures, the batch-RO has been shown to achieve a 70% saving in energy consumption compared to a continuous single-stage RO system. Theoretical investigations on the mass transfer phenomena, including dispersion and concentration polarization, have been carried out to complement and to guide experimental efforts. The performance evaluation of the batch-RO system, named DesaLink, has been based on extensive experimental tests performed upon it. Operating DesaLink using compressed air as power supply under laboratory conditions, a freshwater production of approximately 300 litres per day was recorded with a concentration of around 350 ppm, whilst the feed water had a concentration range of 2500–4500 ppm; the corresponding linkage efficiency was around 40%. In the computational aspect, simulation models have been developed and validated for each of the subsystems of DesaLink, upon which an integrated model has been realised for the whole system. The models, both the subsystem ones and the integrated one, have been demonstrated to predict accurately the system performance under specific operational conditions. A simulation case study has been performed using the developed model. Simulation results indicate that the system can be expected to achieve a water production of 200 m3 per year by using a widely available evacuated tube solar collector having an area of only 2 m2. This freshwater production would satisfy the drinking water needs of 163 habitants in the Rajasthan region, the area for which the case study was performed.

Leg muscles motion during whole body linear frequency sweep vibration

Whole body vibration (WBV) aims to mechanically activate muscles by eliciting stretch reflexes. Mechanical vibrations are usually transmitted to the patient body standing on a oscillating plate. WBV is now more and more utilized not only for fitness but also in physical therapy, rehabilitation and in sport medicine. Effects depend on intensity, direction and frequency of vibration; however, the training frequency is one of the most important factors involved. A preliminary vibratory session can be dedicated to find the best vibration frequency for each subject by varying, stepwise, the stimulation frequency and analyzing the resulting EMG activity. This study concentrates on the analysis of muscle motion in response to a vibration frequency sweep, while subjects held two different postures. The frequency of a vibrating platform was increased linearly from 10 to 60 Hz in 26 s, while platform and single muscles (Rectus Femoris, Biceps Femoris - long head and Gastrocnemius Lateralis) motions were monitored using tiny, lightweight three-axial MEMS accelerometers. Displacements were estimated integrating twice the acceleration data after gravity contribution removal. Mechanical frequency response (amplitude and phase) of the mechanical chains ending at the single muscles was characterized. Results revealed a mechanical resonant-like behavior at some muscles, very similar to a second-order system in the frequency interval explored; resonance frequencies and dumping factors depended on subject and its positioning onto the vibrating platform. Stimulation at the resonant frequency maximizes muscle lengthening, and in turn muscle spindle solicitation, which produce muscle activation. © 2009 Springer-Verlag.

Negotiating topic changes:native and non-native speakers of English in conversation

There is a tendency to view conversations involving non-native speakers (NNSs) as inevitably fraught with problems, including an inability to handle topic management. This article, in contrast, will focus on effective topic changes made by non-native speakers during informal conversations with native speakers of English. A micro-analysis of ten conversations revealed several ways of shifting conversational topics; however, the article concentrates on those strategies which the participants used to effect a particular type of topic move, namely 'marked topic changes', where there is no connection at all with previous talk. The findings show how these topic changes were jointly negotiated, and that the non-native speakers' contributions to initiating new topics were competently managed.