A techno-economic comparison of power production by biomass fast pyrolysis with gasification and combustion

This paper presents an assessment of the technical and economic performance of thermal processes to generate electricity from a wood chip feedstock by combustion, gasification and fast pyrolysis. The scope of the work begins with the delivery of a wood chip feedstock at a conversion plant and ends with the supply of electricity to the grid, incorporating wood chip preparation, thermal conversion, and electricity generation in dual fuel diesel engines. Net generating capacities of 1–20 MWe are evaluated. The techno-economic assessment is achieved through the development of a suite of models that are combined to give cost and performance data for the integrated system. The models include feed pretreatment, combustion, atmospheric and pressure gasification, fast pyrolysis with pyrolysis liquid storage and transport (an optional step in de-coupled systems) and diesel engine or turbine power generation. The models calculate system efficiencies, capital costs and production costs. An identical methodology is applied in the development of all the models so that all of the results are directly comparable. The electricity production costs have been calculated for 10th plant systems, indicating the costs that are achievable in the medium term after the high initial costs associated with novel technologies have reduced. The costs converge at the larger scale with the mean electricity price paid in the EU by a large consumer, and there is therefore potential for fast pyrolysis and diesel engine systems to sell electricity directly to large consumers or for on-site generation. However, competition will be fierce at all capacities since electricity production costs vary only slightly between the four biomass to electricity systems that are evaluated. Systems de-coupling is one way that the fast pyrolysis and diesel engine system can distinguish itself from the other conversion technologies. Evaluations in this work show that situations requiring several remote generators are much better served by a large fast pyrolysis plant that supplies fuel to de-coupled diesel engines than by constructing an entire close-coupled system at each generating site. Another advantage of de-coupling is that the fast pyrolysis conversion step and the diesel engine generation step can operate independently, with intermediate storage of the fast pyrolysis liquid fuel, increasing overall reliability. Peak load or seasonal power requirements would also benefit from de-coupling since a small fast pyrolysis plant could operate continuously to produce fuel that is stored for use in the engine on demand. Current electricity production costs for a fast pyrolysis and diesel engine system are 0.091/kWh at 1 MWe when learning effects are included. These systems are handicapped by the typical characteristics of a novel technology: high capital cost, high labour, and low reliability. As such the more established combustion and steam cycle produces lower cost electricity under current conditions. The fast pyrolysis and diesel engine system is a low capital cost option but it also suffers from relatively low system efficiency particularly at high capacities. This low efficiency is the result of a low conversion efficiency of feed energy into the pyrolysis liquid, because of the energy in the char by-product. A sensitivity analysis has highlighted the high impact on electricity production costs of the fast pyrolysis liquids yield. The liquids yield should be set realistically during design, and it should be maintained in practice by careful attention to plant operation and feed quality. Another problem is the high power consumption during feedstock grinding. Efficiencies may be enhanced in ablative fast pyrolysis which can tolerate a chipped feedstock. This has yet to be demonstrated at commercial scale. In summary, the fast pyrolysis and diesel engine system has great potential to generate electricity at a profit in the long term, and at a lower cost than any other biomass to electricity system at small scale. This future viability can only be achieved through the construction of early plant that could, in the short term, be more expensive than the combustion alternative. Profitability in the short term can best be achieved by exploiting niches in the market place and specific features of fast pyrolysis. These include: •countries or regions with fiscal incentives for renewable energy such as premium electricity prices or capital grants; •locations with high electricity prices so that electricity can be sold direct to large consumers or generated on-site by companies who wish to reduce their consumption from the grid; •waste disposal opportunities where feedstocks can attract a gate fee rather than incur a cost; •the ability to store fast pyrolysis liquids as a buffer against shutdowns or as a fuel for peak-load generating plant; •de-coupling opportunities where a large, single pyrolysis plant supplies fuel to several small and remote generators; •small-scale combined heat and power opportunities; •sales of the excess char, although a market has yet to be established for this by-product; and •potential co-production of speciality chemicals and fuel for power generation in fast pyrolysis systems.

Analysis and design of power management scheme for an on-board solar energy storage system

This paper investigates the power management issues in a mobile solar energy storage system. A multi-converter based energy storage system is proposed, in which solar power is the primary source while the grid or the diesel generator is selected as the secondary source. The existence of the secondary source facilitates the battery state of charge detection by providing a constant battery charging current. Converter modeling, multi-converter control system design, digital implementation and experimental verification are introduced and discussed in details. The prototype experiment indicates that the converter system can provide a constant charging current during solar converter maximum power tracking operation, especially during large solar power output variation, which proves the feasibility of the proposed design. © 2014 IEEE.

Study of the longitudinal distribution of power generated in a random distributed feedback Raman fibre laser with unidirectional pumping

The longitudinal distribution of the Stokes-component power in a Raman fibre laser with a random distributed feedback and unidirectional pumping is measured. The fibre parameters (linear loss and Rayleigh backscattering coefficient) are calculated based on the distributions obtained. A numerical model is developed to describe the lasing power distribution. The simulation results are in good agreement with the experimental data. © 2012 Kvantovaya Elektronika and Turpion Ltd.

Representing supply chain events on the Web of data

The Electronic Product Code Information Service (EPCIS) is an EPCglobal standard, that aims to bridge the gap between the physical world of RFID1 tagged artifacts, and information systems that enable their tracking and tracing via the Electronic Product Code (EPC). Central to the EPCIS data model are "events" that describe specific occurrences in the supply chain. EPCIS events, recorded and registered against EPC tagged artifacts, encapsulate the "what", "when", "where" and "why" of these artifacts as they flow through the supply chain. In this paper we propose an ontological model for representing EPCIS events on the Web of data. Our model provides a scalable approach for the representation, integration and sharing of EPCIS events as linked data via RESTful interfaces, thereby facilitating interoperability, collaboration and exchange of EPC related data across enterprises on a Web scale.

Message passing for distributed optimisation of power allocation with renewable resources

The increase in renewable energy generators introduced into the electricity grid is putting pressure on its stability and management as predictions of renewable energy sources cannot be accurate or fully controlled. This, with the additional pressure of fluctuations in demand, presents a problem more complex than the current methods of controlling electricity distribution were designed for. A global approximate and distributed optimisation method for power allocation that accommodates uncertainties and volatility is suggested and analysed. It is based on a probabilistic method known as message passing [1], which has deep links to statistical physics methodology. This principled method of optimisation is based on local calculations and inherently accommodates uncertainties; it is of modest computational complexity and provides good approximate solutions.We consider uncertainty and fluctuations drawn from a Gaussian distribution and incorporate them into the message-passing algorithm. We see the effect that increasing uncertainty has on the transmission cost and how the placement of volatile nodes within a grid, such as renewable generators or consumers, effects it.

Positioning gender in discourse:a feminist methodology

This book introduces a newly emerging approach to the analysis of talk. FPDA offers a means of analysing the ways in which speakers construct their gender identities within a complex web of power relations. The FPDA approach challenges the traditional feminist view that females are often disempowered within mixed sex settings. This approach shows that both male and female speakers constantly shift between positions of powerfulness and powerlessness - even within the same conversation. The methodology is demonstrated through a study of teenagers' conversations in class and a study of senior managers' discussions in business meetings, concluding with suggestions that while female speakers are often 'silenced' by dominant social discourses, they are far from uniformly powerless.

Power perceptions and modes of complaining in higher education

This study examines the relationship between student perceptions of different types of educator power and different modes of student complaining behaviour in the case of university education. A large sample of marketing students in the business school responded to the study from a state university in Northeastern United States. Factor analysis and canonical correlation analysis are used to explore the relationships between five bases of power perceptions (referent, expert, reward, legitimate, and punishment) and four modes of complaining behaviour (voice, negative word of mouth, third party, and exit). The results indicate that students engage in different modes of complaining as they perceive different types of educator power. The predominant complaining mode is found to be voice under referent or expert power, third party under legitimate power, and exit under reward or punishment power. Our findings offer important implications for student satisfaction, retention, and completion rates in higher education.

Cost and performance analysis of new wood-fuelled power plant concepts

The objective of the thesis was to analyse several process configurations for the production of electricity from biomass. Process simulation models using AspenPlus aimed at calculating the industrial performance of power plant concepts were built, tested, and used for analysis. The criteria used in analysis were performance and cost. All of the advanced systems appear to have higher efficiencies than the commercial reference, the Rankine cycle. However, advanced systems typically have a higher cost of electricity (COE) than the Rankine power plant. High efficiencies do not reduce fuel costs enough to compensate for the high capital costs of advanced concepts. The successful reduction of capital costs would appear to be the key to the introduction of the new systems. Capital costs account for a considerable, often dominant, part of the cost of electricity in these concepts. All of the systems have higher specific investment costs than the conventional industrial alternative, i.e. the Rankine power plant; Combined beat and power production (CUP) is currently the only industrial area of application in which bio-power costs can be considerably reduced to make them competitive. Based on the results of this work, AsperiPlus is an appropriate simulation platform. How-ever, the usefulness of the models could be improved if a number of unit operations were modelled in greater detail. The dryer, gasifier, fast pyrolysis, gas engine and gas turbine models could be improved.

Measuring economies of horizontal and vertical integration in the US electric power industry:how costly is unbundling?

This research employs econometric analysis on a cross section of American electricity companies in order to study the cost implications associated with unbundling the operations of integrated companies into vertically and/or horizontally separated companies. Focusing on the representative sample average firm, we find that complete horizontal and vertical disintegration resulting in the creation of separate nuclear, conventional, and hydro electric generation companies as well as a separate firm distributing power to final consumers, results in a statistically significant 13.5 percent increase in costs. Maintaining a horizontally integrated generator producing nuclear, conventional, and hydro electric generation while imposing vertical separation by creating a stand alone distribution company, results in a lower but still substantial and statistically significant cost penalty amounting to an 8.1 % increase in costs relative to a fully integrated structure. As these results imply that a vertically separated but horizontally integrated generation firm would need to reduce the costs of generation by 11% just to recoup the cost increases associated with vertical separation, even the costs associated with just vertical unbundling are quite substantial. Our paper is also the first academic paper we are aware of that systematically considers the impact of generation mix on vertical, horizontal, and overall scope economies. As a result, we are able to demonstrate that the estimated cost of unbundling in the electricity sector is substantially influenced by generation mix. Thus, for example, we find evidence of strong vertical integration economies between nuclear and conventional generation, but little evidence for vertical integration benefits between hydro generation and the distribution of power. In contrast, we find strong evidence suggesting the presence of substantial horizontal integration economies associated with the joint production of hydro generation with nuclear and/or conventional fossil fuel generation. These results are significant because they indicate that the cost of unbundling the electricity sector will differ substantially in different systems, meaning that a blanket regulatory policy with regard to the appropriateness of vertical and horizontal unbundling is likely to be inappropriate.

The future of the public library:reimagining the moral economy of the 'people's university'

New media technologies, the digitisation of information, learning archives and heritage resources are changing the nature of the public library and museums services across the globe, and, in so doing, changing the way present and future users of these services interact with these institutions in real and virtual spaces. New digital technologies are rewriting the nature of participation, learning and engagement with the public library, and fashioning a new paradigm where virtual and physical spaces and educative and temporal environments operate symbiotically. It is with such a creatively disruptive paradigm that the £193 million Library of Birmingham project in the United Kingdom is being developed. New and old media forms and platforms are helping to fashion new public places and spaces that reaffirm the importance of public libraries as conceived in the nineteenth century. As people’s universities, the public library service offers a web of connective learning opportunities and affordances. This article considers the importance of community libraries as sites of intercultural understanding and practical social democracy. Their significance is reaffirmed through the initial findings in the first of a series of community interventions forming part of a long-term project, ‘Connecting Spaces and Places’, funded by the Royal Society of Arts.

Simulation and Evaluation of High-Voltage Power Systems for Civil Aircraft

A status report of the modelling and simulation work that is being undertaken as part of the TIMES (Totally Integrated More Electric Systems) project is presented. Dynamic power quality simulations have been used to asses the performance of the electrical system of a EMA based actuation system for an Airbus A330 size aircraft, for both low voltage 115 V, and high voltage 230 V three-phase AC systems. The high voltage system is shown to have benefits in terms of power quality and reduced size and weight of equipment.

Power conversion and signal transmission integration method based on dual modulation of DC-DC converters

For the development of communication systems such as Internet of Things, integrating communication with power supplies is an attractive solution to reduce supply cost. This paper presents a novel method of power/signal dual modulation (PSDM), by which signal transmission is integrated with power conversion. This method takes advantage of the intrinsic ripple initiated in switch mode power supplies as signal carriers, by which cost-effective communications can be realized. The principles of PSDM are discussed, and two basic dual modulation methods (specifically PWM/FSK and PWM/PSK) are concluded. The key points of designing a PWM/FSK system, including topology selection, carrier shape, and carrier frequency, are discussed to provide theoretical guidelines. A practical signal modulation-demodulation method is given, and a prototype system provides experimental results to verify the effectiveness of the proposed solution.

Power optimization of random distributed feedback fiber lasers

We present a comprehensive study of power output characteristics of random distributed feedback Raman fiber lasers. The calculated optimal slope efficiency of the backward wave generation in the one-arm configuration is shown to be as high as ∼90% for 1 W threshold. Nevertheless, in real applications a presence of a small reflection at fiber ends can appreciably deteriorate the power performance. The developed numerical model well describes the experimental data. © 2012 Optical Society of America.

Power and spectral optimization of random distributed feedback fiber lasers

We present the optimization of power and spectral performances of the random DFB fiber laser using the balance equation set. The numerical results are in good in agreement with experiments. © 2012 OSA.

Supporting learners’ agentic engagement with feedback:a systematic review and a taxonomy of recipience processes

Much has been written in the educational psychology literature about effective feedback and how to deliver it. However, it is equally important to understand how learners actively receive, engage with, and implement feedback. This article reports a systematic review of the research evidence pertaining to this issue. Through an analysis of 195 outputs published between 1985 and early 2014, we identified various factors that have been proposed to influence the likelihood of feedback being used. Furthermore, we identified diverse interventions with the common aim of supporting and promoting learners' agentic engagement with feedback processes. We outline the various components used in these interventions, and the reports of their successes and limitations. Moreover we propose a novel taxonomy of four recipience processes targeted by these interventions. This review and taxonomy provide a theoretical basis for conceptualizing learners' responsibility within feedback dialogues and for guiding the strategic design and evaluation of interventions. Receiving feedback on one's skills and understanding is an invaluable part of the learning process, benefiting learners far more than does simply receiving praise or punishment (Black & Wiliam, 1998 Black, P., & Wiliam, D. (1998). Assessment and classroom learning. Assessment in Education: Principles, Policy & Practice, 5, 7–74. doi:10.1080/0969595980050102[Taylor & Francis Online]; Hattie & Timperley, 2007 Hattie, J., & Timperley, H. (2007). The power of feedback. Review of Educational Research, 77, 81–112. doi:10.3102/003465430298487[CrossRef], [Web of Science ®]). Inevitably, the benefits of receiving feedback are not uniform across all circumstances, and so it is imperative to understand how these gains can be maximized. There is increasing consensus that a critical determinant of feedback effectiveness is the quality of learners' engagement with, and use of, the feedback they receive. However, studies investigating this engagement are underrepresented in academic research (Bounds et al., 2013 Bounds, R., Bush, C., Aghera, A., Rodriguez, N., Stansfield, R. B., & Santeen, S. A. (2013). Emergency medicine residents' self-assessments play a critical role when receiving feedback. Academic Emergency Medicine, 20, 1055–1061. doi:10.1111/acem.12231[CrossRef], [PubMed], [Web of Science ®]), which leaves a “blind spot” in our understanding (Burke, 2009 Burke, D. (2009). Strategies for using feedback students bring to higher education. Assessment & Evaluation in Higher Education, 34, 41–50. doi:10.1080/02602930801895711[Taylor & Francis Online], [Web of Science ®]). With this blind spot in mind, the present work sets out to systematically map the research literature concerning learners' proactive recipience of feedback. We use the term “proactive recipience” here to connote a state or activity of engaging actively with feedback processes, thus emphasizing the fundamental contribution and responsibility of the learner (Winstone, Nash, Rowntree, & Parker, in press Winstone, N. E., Nash, R. A., Rowntree, J., & Parker, M. (in press). ‘It'd be useful, but I wouldn't use it’: Barriers to university students' feedback seeking and recipience. Studies in Higher Education. doi: 10.1080/03075079.2015.1130032[Taylor & Francis Online]). In other words, just as Reeve and Tseng (2011 Reeve, J., & Tseng, M. (2011). Agency as a fourth aspect of student engagement during learning activities. Contemporary Educational Psychology, 36, 257–267. doi:10.1016/j.cedpsych.2011.05.002[CrossRef], [Web of Science ®]) defined “agentic engagement” as a “student's constructive contribution into the flow of the instruction they receive” (p. 258), likewise proactive recipience is a form of agentic engagement that involves the learner sharing responsibility for making feedback processes effective.