Addressing the project implementation challenges in the Saudi Arabian power supply industry: an investigative approach towards improving project delivery

For many decades, the Kingdom of Saudi Arabia has been widely known for being a reliable oil exporter. This fact, however, has not exempted it from facing significant domestic energy challenges. One of the most pressing of these challenges involves bridging the widening electricity supply-demand gap where, currently, the demand is growing at a very fast rate. One crucial means to address this challenge is through delivering power supply projects with maximum efficiency. Project delivery delay, however, is not uncommon in this highly capital-intensive industry, indicating electricity supplies are not coping with the demand increases. To provide a deeper insight into the challenges of project implementation and efficient practice, this research adopts a pragmatic approach by triangulating literature, questionnaires and semi-structured interviews. The research was conducted in the Saudi Arabian power supply industry – Western Operating Area. A total of 105 usable questionnaires were collected, and 28 recorded, semi-structured interviews were conducted, analysed and synthesised to produce a conceptual model of what constitutes the project implementation challenges in the investigated industry. This was achieved by conducting a comprehensive ranking analysis applied to all 58 identified and surveyed factors which, according to project practitioners in the investigated industry, contribute to project delay. 28 of these project delay factors were selected as the "most important" ones. Factor Analysis was employed to structure these 28 most important project delay factors into the following meaningful set of 7 project implementation challenges: Saudi Electricity Company's contractual commitments, Saudi Electricity Company's communication and coordination effectiveness, contractors' project planning and project control effectiveness, consultant-related aspects, manpower challenges and material uncertainties, Saudi Electricity Company's tendering system, and lack of project requirements clarity. The study has implications for industry policy in that it provides a coherent assessment of the key project stakeholders' central problems. From this analysis, pragmatic recommendations are proposed that, if enacted, will minimise the significance of the identified problems on future project outcomes, thus helping to ensure the electricity supply-demand gap is diminished.

Factors affecting human reliability in the chemical process industry

This research was concerned with identifying factors which may influence human reliability within chemical process plants - these factors are referred to as Performance Shaping Factors (PSFs). Following a period of familiarization within the industry, a number of case studies were undertaken covering a range of basic influencing factors. Plant records and site `lost time incident reports' were also used as supporting evidence for identifying and classifying PSFs. In parallel to the investigative research, the available literature appertaining to human reliability assessment and PSFs was considered in relation to the chemical process plan environment. As a direct result of this work, a PSF classification structure has been produced with an accompanying detailed listing. Phase two of the research considered the identification of important individual PSFs for specific situations. Based on the experience and data gained during phase one, it emerged that certain generic features of a task influenced PSF relevance. This led to the establishment of a finite set of generic task groups and response types. Similarly, certain PSFs influence some human errors more than others. The result was a set of error type key words, plus the identification and classification of error causes with their underlying error mechanisms. By linking all these aspects together, a comprehensive methodology has been forwarded as the basis of a computerized aid for system designers. To recapitulate, the major results of this research have been: One, the development of a comprehensive PSF listing specifically for the chemical process industries with a classification structure that facilitates future updates; and two, a model of identifying relevant SPFs and their order of priority. Future requirements are the evaluation of the PSF listing and the identification method. The latter must be considered both in terms of `useability' and its success as a design enhancer, in terms of an observable reduction in important human errors.

An expert system for the development of a health and safety policy/risk assessment in the plastics industry

Health and safety policies may be regarded as the cornerstone for positive prevention of occupational accidents and diseases. The Health and Safety at Work, etc Act 1974 makes it a legal duty for employers to prepare and revise a written statement of a general policy with respect to the health and safety at work of employees as well as the organisation and arrangements for carrying out that policy. Despite their importance and the legal equipment to prepare them, health and safety policies have been found, in a large number of plastics processing companies (particularly small companies), to be poorly prepared, inadequately implemented and monitored. An important cause of these inadequacies is the lack of necessary health and safety knowledge and expertise to prepare, implement and monitor policies. One possible way of remedying this problem is to investigate the feasibility of using computers to develop expert system programs to simulate the health and safety (HS) experts' task of preparing the policies and assisting companies implement and monitor them. Such programs use artificial intelligence (AI) techniques to solve this sort of problems which are heuristic in nature and require symbolic reasoning. Expert systems have been used successfully in a variety of fields such as medicine and engineering. An important phase in the feasibility of development of such systems is the engineering of knowledge which consists of identifying the knowledge required, eliciting, structuring and representing it in an appropriate computer programming language.

Perceptions of technological change : the attitude of managers towards group technology in the United States food equipment industry

In the center of today's continued and rapid technological change and ever competitive environment of the next millennium, manufacturers must realize that unless they are ready to consider and evaluate new technologies brought onto them, they may fail to adequately respond to the challenges that lie ahead of them. This research was designed to determine the consistency of the perceptions of technical and non-technical administrators, in manufacturing environment, towards technological change and group technology as an advanced manufacturing system. This research has included a review of literature with references to technological change, justification and implementation processes, and various manufacturing systems including group technology and its benefits. This research has used the research method of empirical analysis (quantitative) and case studies (qualitative) to research perceptions of technical and non-technical administrators towards technological change and group technology. Sixty-four (64) technical and fifty-one (51) nontechnical administrators from fifty (50) manufacturing organizations in the United States of America responded to the mail survey questionnaire used in this research. Responses were analyzed using the Repeated Measures ANOVA procedure to compare mean responses of each group. Two correlation analyses, Cronback Coefficient Alpha and Pearson Correlation Coefficient, were also performed to determine the reliability of the questionnaire as well as the degree of correlation of perceptions between these two groups. This research, through the empirical analysis, has found that perceptions of the technical and non-technical administrators towards group technology were not consistent. In other words, they did not perceive the benefits of group technology in the same manner to the overall organizational performance. This finding was significant since it provided the first clear and comprehensive view of the technical and non-technical administrators' perception towards group technology and technological change, in Food Equipment Manufacturer Industry, in United States of America. In addition, a number of cases were analyzed and the results have supported those of the quantitative analysis. Therefore, this research not only has provided basic data, which was unavailable prior to this investigation, but it also provided a basis for future studies.

The impact of the post-1993 economic reforms on Chinese state-owned enterprises:evidence from the electronics industry

Since 1979, China has embarked on a series of economic reform programmes, leading its socialist economy away from a Soviet planning model towards a much greater reliance on the market. In the course of the last twenty years, the Chinese economy has enjoyed a phenomenally high economic growth rate. However, earlier research suggests that Chinese state-owned enterprises remain a financial 'black hole' for the Chinese economy, in spite of various enterprise reform measures. This thesis tries to assess the impact of the reforms after 1993, especially the so-called Modern Enterprise System, on the behaviour and management practices of state firms. The central research question is whether the new rounds of economic reform have changed state firms into commercial entities operating according to market signals, as intended. In order to explore this question, an institutional approach is employed. More specifically, the thesis examines how the behaviour and management practices of state enterprises have changed with changes in the institutional environmental resulting from the introduction of new reform measures and especially the MES. The main evidence used in this research comes from the Chinese electronics industry (CEI). Non-state firms, namely collectives and joint ventures, are involved in the study to provide a benchmark against which changes in the behaviour of state firms in the mid and late 1990s are compared. A comparative statistical analysis shows that state-owned firms, both traditional and corporatised ones, still lag behind collectives and joint ventures in terms of both labour and total factor productivity. The further empirical work of this research consists of a questionnaire survey and case studies that are based on interviews with senior managers of 17 firms in the CEI. The findings of these analyses suggest that there has been little fundamental change in the behaviour pattern of state firms in the 1990s, despite the introduction of the Modern Enterprise System, and that the economic reforms after 1993 so far seem to have failed to transform the state firms into commercial entities operating according to market signals.

Stakeholder accounting : the case of the electricity industry in England and Wales

This thesis proposes to explore the potential for stakeholder based accounting as a means to explain the social performance of organisations. It argues that organisations have a contract with society and as a consequence they must be accountable to that society for their actions. Further, it is suggested that as part of this accountability there is a broader need in the public interest for social accounting. Due to the pluralistic nature of modern societies it is argued that a stakeholder framework is one way in which this accountability can be achieved. In order to consider the nature of such social accounting a case study of the electricity industry in England and Wales is undertaken. This industry is very important to modern society, has significant environment implications and has a recent history of remarkable change. These factors make it an interesting and unique case within which to consider accountability. From the performance measurement and accounting literature and a series of interviews with both stakeholders and privatised companies a model of stakeholder performance is developed. This is then used to analyse the electricity industry in England and Wales since privatisation. The objective is to demonstrate how certain stakeholders have fared, whether they have won or lost. Further, institutional and resource dependency theories are used to consider what factors determine the relative success or failure of the different stakeholder groups. Finally the possible implications of recent developments in Social Accounting Standards, such as the Global Reporting Initiative (GRI), AccountAbility 1000 (AA1000) and Social Accountability 8000 (SA8000), and the potential for Internet reporting are considered.

A configuration framework of manufacturing strategy paradigm in state owned enterprises within China's petrochemical industry:building context-embedded configurations for the paradigm of strategic manufacturing management from exploratory case studies

The role of the production system as a key determinant of competitive performance of business operations- has long been the subject of industrial organization research, even predating the .explicit conceptua1isation of manufacturing, strategy in the literature. Particular emergent production issues such as the globalisation of production, global supply chain management, management of integrated manufacturing and a growing e~busjness environment are expected to critically influence the overall competitive performance and therefore the strategic success of the organization. More than ever, there is a critical need to configure and improve production system and operations competence in a strategic way so as to contribute to the long-term competitiveness of the organization. In order to operate competitively and profitably, manufacturing companies, no matter how well managed, all need a long-term 'strategic direction' for the development of operations competence in order to consistently produce more market value with less cost towards a leadership position. As to the long-term competitiveness, it is more important to establish a dynamic 'strategic perspective' for continuous operational improvements in pursuit of this direction, as well as ongoing reviews of the direction in relation to the overall operating context. However, it also clear that the 'existing paradigm of manufacturing strategy development' is incapable of adequately responding to the increasing complexities and variations of contemporary business operations. This has been factually reflected as many manufacturing companies are finding that methodologies advocated in the existing paradigm for developing manufacturing strategy have very limited scale and scope for contextual contingency in empirical application. More importantly, there has also emerged a deficiency in the multidimensional and integrative profile from a theoretical perspective when operationalising the underlying concept of strategic manufacturing management established in the literature. The point of departure for this study was a recognition of such contextual and unitary limitations in the existing paradigm of manufacturing strategy development when applied to contemporary industrial organizations in general, and Chinese State Owned Enterprises (SOEs) in particular. As China gradually becomes integrated into the world economy, the relevance of Western management theory and its paradigm becomes a practical matter as much as a theoretical issue. Since China markedly differs from Western countries in terms of culture, society, and political and economic systems, it presents promising grounds to test and refine existing management theories and paradigms with greater contextual contingency and wider theoretical perspective. Under China's ongoing programmes of SOE reform, there has been an increased recognition that strategy development is the very essence of the management task for managers of manufacturing companies in the same way as it is for their counterparts in Western economies. However, the Western paradigm often displays a rather naive and unitary perspective of the nature of strategic management decision-making, one which largely overlooks context-embedded factors and social/political influences on the development of manufacturing strategy. This thesis studies the successful experiences of developing manufacturing strategy from five high-performing large-scale SOEs within China’s petrochemical industry. China’s petrochemical industry constitutes a basic heavy industrial sector, which has always been a strategic focus for reform and development by the Chinese government. Using a confirmation approach, the study has focused on exploring and conceptualising the empirical paradigm of manufacturing strategy development practiced by management. That is examining the ‘empirical specifics’ and surfacing the ‘managerial perceptions’ of content configuration, context of consideration, and process organization for developing a manufacturing strategy during the practice. The research investigation adopts a qualitative exploratory case study methodology with a semi-structural front-end research design. Data collection follows a longitudinal and multiple-case design and triangulates case evidence from sources including qualitative interviews, direct observation, and a search of documentations and archival records. Data analysis follows an investigative progression from a within-case preliminary interpretation of facts to a cross-case search for patterns through theoretical comparison and analytical generalization. The underlying conceptions in both the literature of manufacturing strategy and related studies in business strategy were used to develop theoretical framework and analytical templates applied during data collection and analysis. The thesis makes both empirical and theoretical contributions to our understanding of 'contemporary management paradigm of manufacturing strategy development'. First, it provides a valuable contextual contingency of the 'subject' using the business setting of China's SOEs in petrochemical industry. This has been unpacked into empirical configurations developed for its context of consideration, its content and process respectively. Of special note, a lean paradigm of business operations and production management discovered at case companies has significant implications as an emerging alternative for high-volume capital intensive state manufacturing in China. Second, it provides a multidimensional and integrative theoretical profile of the 'subject' based upon managerial perspectives conceptualised at case companies when operationalising manufacturing strategy. This has been unpacked into conceptual frameworks developed for its context of consideration, its content constructs, and its process patterns respectively. Notably, a synergies perspective towards the operating context, competitive priorities and competence development of business operations and production management has significant implications for implementing a lean manufacturing paradigm. As a whole, in so doing, the thesis established a theoretical platform for future refinement and development of context-specific methodologies for developing manufacturing strategy.

Development of an e-business selection framework for manufacturing SMEs : a study of the printing industry

The aim of the research is to develop an e-business selection framework for small and medium enterprises (SMEs) by integrating established techniques in planning. The research is case based, comprising four case studies carried out in the printing industry for the purpose of evaluating the framework. Two of the companies are from Singapore, while the other two are from Guangzhou, China and Jinan, China respectively. To determine the need of an e-business selection framework for SMEs, extensive literature reviews were carried out in the area of e-business, business planning frameworks, SMEs and the printing industry. An e-business selection framework is then proposed by integrating the three established techniques of the Balanced Scorecard (BSC), Value Chain Analysis (VCA) and Quality Function Deployment (QFD). The newly developed selection framework is pilot tested using a published case study before actual evaluation is carried out in four case study companies. The case study methodology was chosen because of its ability to integrate diverse data collection techniques required to generate the BSC, VCA and QFD for the selection framework. The findings of the case studies revealed that the three techniques of BSC, VCA and QFD can be integrated seamlessly to complement on each other’s strengths in e-business planning. The eight-step methodology of the selection framework can provide SMEs with a step-by-step approach to e-business through structured planning. Also, the project has also provided better understanding and deeper insights into SMEs in the printing industry.

An assessment of the industry cluster approach as a tool for local economic development:the case of the new media industry in Birmingham

Industry cluster policies are a current trend in local economic development programmes and represent a major shift from traditional approaches. This trend has been coupled by an increasing interest in new media industry as a significant focus for regional development strategies. In England clusters and new media industry have therefore come to be seen as important tools in promoting local and regional economic development. This study aimed to ascertain the success of these policies. In order to achieve the aims of the study, the Birmingham new media industry was chosen for the study. In addition to an extensive review of the literature, semi-structured interviews were conducted with new media firms and Business Support Agencies (BSAs) offering programmes to promote the development of the new media industry cluster. The key findings of the thesis are that the concerns of new media industry when choosing their location do not conform to the industry cluster theory. Moreover, close proximity in geographical location of the industries does not mean there is collaboration and any costs saved as a result of close proximity to similar firms are at present seen as irrelevant because of the type of products they offer. Building trust between firms is the key in developing the new media industry cluster and the BSAs can act as a broker and provide neutral ground to develop it. The key policy recommendations are that new media industry is continually changing and research must continuously track and analyse cluster dynamics in order to be aware of emerging trends and future developments that can positively and negatively affect the cluster. Policy makers need to keep in mind that there is no uniform tool kit to foster the different sectors in cluster development. It is also important for them to be winning support and trust of new media firms since this is key in the success of the cluster. When cluster programs are introduced they must explain their benefits to industries more effectively in order to encourage them to participate in programmes. The general conclusions of the thesis are that clusters are a potentially important tool in local economic development policy and that the new media industry has a considerable growth potential. The kinds of relationships which cluster theory suggests develop between do not, as yet, appear to exist within the new media cluster. There are however, steps that the BSAs can take to encourage their development. Thus, the BSAs need to ensure that they establish an environment that enables growth of the industry.

Marketing strategy and new product development in the UK credit card industry

The development of new products in today's marketing environment is generally accepted as a requirement for the continual growth and prosperity of organisations. The literature is consequently rich with information on the development of various aspects of good products. In the case of service industries, it can be argued that new service product development is of as least equal importance as it is to organisations that produce tangible goods products. Unlike the new goods product literature, the literature on service marketing practices, and in particular, new service product development, is relatively sparse. The main purpose of this thesis is to examine a number of aspects of new service product development practice with respect to financial services and specifically, credit card financial services. The empirical investigation utilises both a case study and a survey approach, to examine aspects of new service product development industry practice relating specifically to gaps and deficiencies in the literature with respect to the financial service industry. The findings of the empirical work are subsequently examined in the context in which they provide guidance and support for a new normative new service product development model. The study examines the UK credit card financial service product sector as an industry case study and perspective. The findings of the field work reveal that the new service product development process is still evolving, and that in the case of credit card financial services can be seen as a well-structured and well-documented process. New product development can also be seen as an incremental, complex, interactive and continuous process which has been applied in a variety of ways. A number of inferences are subsequently presented.

Determinants of sales performance in insurance industry:a cross-cultural comparison between the UK and Malaysia

This thesis is concerned with an empirical investigation of the factors that predict a successful salesperson, using a cross-cultural comparison of two countries: the UK and Malaysia. Besides collecting quantitative data, qualitative data on organisational, environmental and cultural factors were also collected through interviews, personal and case observations. The quantitative data consist of sixteen independent factors and three dependent factors. The independent variables include self-efficacy, self-esteem, locus of control, self-monitoring, extrinsic motivation, intrinsic motivation, experience, training perception, role ambiguity, role conflict, role inaccuracy, gender, age, education, race and religion. The dependent variables are performance target achieved, performance earnings and performance ratings. Questionnaires were distributed to about 500 salespersons in each country, from three insurance companies in the UK and two insurance companies in Malaysia. Response rates were 75 and 50 percent from the UK and Malaysia respectively. The survey results indicated that a salesperson's performance in the UK is predicted by self-efficacy, internal locus of control, self-esteem, extrinsic motivation, experience, training perceptions, role conflict and gender. In Malaysia, a salesperson's performance is predicted by self-efficacy, self-monitoring, experience, role conflict, role ambiguity, education, gender, race and religion. Self-efficacy, experience, role conflict and gender are common predictors of salespersons' performance in both cultures. The likely explanation for these results is culture differences, i.e. UK has a homogeneous culture, while Malaysia has a heterogeneous one. Results from the case observations, such as organisational and environmental factors, give supporting evidence in explaining the empirical results. Implications from the findings are discussed from two aspects: (1) theoretical implications for divergence/convergence theory, Hofstede's model, Churchill's model, and (2) managerial implications for selection, training, motivation and appraisal.

Environmental features which limit organization and industry viability:a study of the footwear industry

This thesis proposes a conceptual framework for the analysis of organizational environments. Three primary segments of the task environment - the transaction environment, the industrial environment and the ecotone are delineated. The interrelationships between the organization and these three environmental segments are examined. It is suggested that the task environment i) defines the nature of the task confronting the organization and the economic, political and social position of the organization within this network; ii) influences the way organizations and industries are organized; iii) prevents recognition of the need for adaptation and change; and iv) limits the alternatives available to the organization should changes in the environment render existing technology, behaviour and structures obsolete. The British Footwear Industry provides an example of how this framework might be used to investigate the problem of industry decline and organization viability. It is argued that the explanations usually put forth to explain organization failure and industrial decline have not taken into consideration the environmental factors which affect organization and industry viability. The shift from national markets to global markets has altered the composition of the task environment and has changed the nature of competition from firm versus firm to environment versus environment. Organizations do not compete in the market, their products do. These products are often produced by organizations embedded in environments which are significantly different from the one in which the focal organization and industry are embedded.

Industrial relations in the road passenger transport industry-a political-economic analysis.

This thesis examines the British Bus and Tram Industry from 1889 to 1988. The first determinant of the pattern of industrial relations is the development of the labour-process. The labour process changes with the introduction of new technology (electrified trams and mechanised buses), the concentration and centralisation of ownership, the decline of competition, changing market position, municipal and state regulation, ownership and control. The tram industry, as a consequence of electrification, is almost wholly municipally owned and the history of the labour process from horse-trams to the decline of the industry is examined. The bus industry has a less unified structure and is examined by sector; London, Municipal, and Territorial/Provincial. The small independent sector is largely ignored. The labour process is examined from the horse-bus to the present day. The development of resistance in the labour process is discussed both as a theoretical problematic (the `Braverman Debate') and through the process of unionisation, the centralisation and bureaucratisation of the unions, the development of national bargaining structures (National Joint Industrial Council and the National Council for the Omnibus Industry), and the development of resistance to those processes. This resistance takes either a syndicalist form, or under Communist Party leadership the form of rank and file movements, or simply unofficial organisations of branch officials. The process of centralisation of the unions, bureaucratisation and the institutionalisation of bargaining and the relationship between this process and the role of the Unions in the Labour Party is examined. Neo-corporatism, that is the increasing integration of the leadership of the main Union, the T.G.W.U.with the Labour Party and with the State is discussed. In theoretical terms, this thesis considers the debate around the notion of `labour process', the relationship between labour process and labour politics and between labour process and labour history. These relationships are placed within a discussion of class consciousness.

A comparative and longitudinal analysis of the evolving relationship between the environment and the strategy, structure and performance of selected organisations in the British carpet industry 1959-1986:a firms in sector perspective of organisational adaptation

Orthodox contingency theory links effective organisational performance to compatible relationships between the environment and organisation strategy and structure and assumes that organisations have the capacity to adapt as the environment changes. Recent contributions to the literature on organisation theory claim that the key to effective performance is effective adaptation which in turn requires the simultaneous reconciliation of efficiency and innovation which is afforded by an unique environment-organisation configuration. The literature on organisation theory recognises the continuing confusion caused by the fragmented and often conflicting results from cross-sectional studies. Although the case is made for longitudinal studies which comprehensively describe the evolving relationship between the environment and the organisation there is little to suggest how such studies should be executed in practice. Typically the choice is between the approaches of the historicised case study and statistical analysis of large populations which examine the relationship between environment and organisation strategy and/or structure and ignore the product-process relationship. This study combines the historicised case study and the multi-variable and ordinal scale approach of statistical analysis to construct an analytical framework which tracks and exposes the environment-organisation-performance relationship over time. The framework examines changes in the environment, strategy and structure and uniquely includes an assessment of the organisation's product-process relationship and its contribution to organisational efficiency and innovation. The analytical framework is applied to examine the evolving environment-organisation relationship of two organisations in the same industry over the same twenty-five year period to provide a sector perspective of organisational adaptation. The findings demonstrate the significance of the environment-organisation configuration to the scope and frequency of adaptation and suggest that the level of sector homogeneity may be linked to the level of product-process standardisation.