Reactive processing of polymers:melt grafting of glycidyl methacrylate on ethylene propylene copolymer in the presence of a coagent

Glycidyl methacrylate (GMA) was grafted on ethylene-propylene copolymer during melt processing with peroxide initiation in the presence and absence of a more reactive comonomer (coagent), trimethylolpropane triacrylate (Tris). The characteristics of the grafting systems in terms of the grafting reaction yield and the nature and extent of the competing side reactions were examined. The homopolymers of GMA (Poly-GMA) and Tris (Poly-Tris) and the GMA-Tris copolymer (GMA-co-Tris) were synthesized and characterized. In the absence of the coagent, high levels of poly-GMA, which constituted the major competing reaction, was formed, giving rise to low GMA grafting levels. Further, this grafting system resulted in a high extent of gel formation and polymer crosslinking due to the high levels of peroxide needed to achieve optimum GMA grafting and a consequent large drop in the melt index (increased viscosity) of the polymer. In the presence of the coagent, however, the grafting system required much lower peroxide concentration, by almost an order of magnitude, to achieve the optimum grafting yield. The coagent-containing GMA-grafting system has also resulted in a drastic reduction in the extent of all competing reactions, and in particular, the GMA homopolymerization, leading to improved GMA grafting efficiency with no detectable gel or crosslinking. The mechanisms of the grafting reactions, in the presence and absence of Tris, are proposed.

A patient's perspective:the impact of adverse drug reactions on patients and their views on reporting

What is known and objective: Adverse drug reactions to prescribed medication are relatively common events. However, the impact such reactions have on patients and their attitude to reporting such events have only been poorly explored. Previous studies relying on self-reporting patients indicate that altruism is an important factor. In the United Kingdom, patient reporting started in 2005; though, numbers of serious reports remain low. Method: A purposive sample of fifteen patients who had been admitted to an inner city hospital with an adverse drug reaction were interviewed using a semi-structured questionnaire. Patients were asked to relate in their own words their experience of an adverse drug reaction. Patient's reactions to the information leaflet, adherence to treatment and use of other sources of information on medication were assessed. Interviews were recorded, and a thematic analysis of patients'responses was performed. Results and discussion: Analysis of the patient interviews demonstrated the reality of being admitted to hospital is often a frightening process with a significant emotional cost. Anger, isolation, resentment and blame were common factors, particularly when medicines had been prescribed for acute conditions. For patients with chronic conditions, a more phlegmatic approach was seen especially with conditions with a strong support networks. Patients felt that communication and information should have been more readily available from the health care professional who prescribed the medication, although few had read the patient information leaflet. Only a minority of patients linked the medication they had taken to the adverse event, although some had received false reassurance that the drug was not related to their illness creating additional barriers. In contrast to previous studies, many patients felt that adverse drug reporting was not their concern, particularly as they obtained little direct benefit from it. The majority of patients were unaware of the Yellow Card Scheme in the UK for patient reporting. Even when explained, the scheme was felt too cold and impersonal and not a patient's 'job'. What is new and conclusion: Patients having a severe adverse drug reaction following an acute illness felt negative emotions towards their health care provider. Those with a chronic condition rationalized the event and coped better with its impact. Neither group felt that reporting the adverse reaction was their responsibility. Encouraging patients to report remains important but expecting patients to report solely for altruistic purposes may be unrealistic. © 2011 Blackwell Publishing Ltd.

Pre-adoption market reaction to IFRS 9:a cross-country event-study

We are the first to examine the market reaction to 13 announcement dates related to IFRS 9 for over 5400 European listed firms. We find an overall positive reaction to the introduction of IFRS 9. The regulation is particularly beneficial to shareholders of firms in countries with weaker rule of law and a smaller divergence between local GAAP and IAS 39. Bootstrap simulations rule out the possibility that sampling error or data mining are driving our findings. Our main findings are also robust to confounding events and the extent of the media coverage for each event. These results suggest that investors perceive the new regulation as shareholder-wealth enhancing and support the view that stronger comparability across accounting standards of European firms is beneficial to international investors and outweighs the costs of poorer firm-specific information.

Losses, dividend reductions, and market reaction associated with past earnings and dividends patterns

This paper examines investors' reactions to dividend reductions or omissions conditional on past earnings and dividend patterns for a sample of eighty-two U.S. firms that incurred an annual loss. We document that the market reaction for firms with long patterns of past earnings and dividend payouts is significantly more negative than for firms with lessestablished past earnings and dividends records. Our results can be explained by the following line of reasoning. First, consistent with DeAngelo, DeAngelo, and Skinner (1992), a loss following a long stream of earnings and dividend payments represents an unreliable indicator of future earnings. Thus, established firms have higher loss reliability than less-established firms. Second, because current earnings and dividend policy are a substitute source of means of forecasting future earnings, lower loss reliability increases the information content of dividend reductions. Therefore, given the presence of a loss, the longer the stream of prior earnings and dividend payments, (1) the lower the loss reliability and (2) the more reliably dividend cuts are perceived as an indication that earnings difficulties will persist in the future.

Effect of Cu and Sn promotion on the catalytic deoxygenation of model and algal lipids to fuel-like hydrocarbons over supported Ni catalysts

The ability of Cu and Sn to promote the performance of a 20% Ni/Al2O3 catalyst in the deoxygenation of lipids to fuel-like hydrocarbons was investigated using model triglyceride and fatty acid feeds, as well as algal lipids. In the semi-batch deoxygenation of tristearin at 260 °C a pronounced promotional effect was observed, a 20% Ni-5% Cu/Al2O3 catalyst affording both higher conversion (97%) and selectivity to C10-C17 alkanes (99%) in comparison with unpromoted 20% Ni/Al2O3 (27% conversion and 87% selectivity to C10-C17). In the same reaction at 350 °C, a 20% Ni-1% Sn/Al2O3 catalyst afforded the best results, giving yields of C10-C17 and C17 of 97% and 55%, respectively, which contrasts with the corresponding values of 87 and 21% obtained over 20% Ni/Al2O3. Equally encouraging results were obtained in the semi-batch deoxygenation of stearic acid at 300 °C, in which the 20% Ni-5% Cu/Al2O3 catalyst afforded the highest yields of C10-C17 and C17. Experiments were also conducted at 260 °C in a fixed bed reactor using triolein − a model unsaturated triglyceride − as the feed. While both 20% Ni/Al2O3 and 20% Ni-5% Cu/Al2O3 achieved quantitative yields of diesel-like hydrocarbons at all reaction times sampled, the Cu-promoted catalyst exhibited higher selectivity to longer chain hydrocarbons, a phenomenon which was also observed in experiments involving algal lipids as the feed. Characterization of fresh and spent catalysts indicates that Cu enhances the reducibility of Ni and suppresses both cracking reactions and coke-induced deactivation.

Bioactive sol-gel glasses at the atomic scale:the complementary use of advanced probe and computer modeling methods

Sol-gel-synthesized bioactive glasses may be formed via a hydrolysis condensation reaction, silica being introduced in the form of tetraethyl orthosilicate (TEOS), and calcium is typically added in the form of calcium nitrate. The synthesis reaction proceeds in an aqueous environment; the resultant gel is dried, before stabilization by heat treatment. These materials, being amorphous, are complex at the level of their atomic-scale structure, but their bulk properties may only be properly understood on the basis of that structural insight. Thus, a full understanding of their structure-property relationship may only be achieved through the application of a coherent suite of leading-edge experimental probes, coupled with the cogent use of advanced computer simulation methods. Using as an exemplar a calcia-silica sol-gel glass of the kind developed by Larry Hench, in the memory of whom this paper is dedicated, we illustrate the successful use of high-energy X-ray and neutron scattering (diffraction) methods, magic-angle spinning solid-state NMR, and molecular dynamics simulation as components to a powerful methodology for the study of amorphous materials.

Protocol optimization for the mild detemplation of mesoporous silica nanoparticles resulting in enhanced texture and colloidal stability

Porosity development of mesostructured colloidal silica nanoparticles is related to the removal of the organic templates and co-templates which is often carried out by calcination at high temperatures, 500-600 °C. In this study a mild detemplation method based on the oxidative Fenton chemistry has been investigated. The Fenton reaction involves the generation of OH radicals following a redox Fe3+/Fe2+ cycle that is used as catalyst and H2O2 as oxidant source. Improved material properties are anticipated since the Fenton chemistry comprises milder conditions than calcination. However, the general application of this methodology is not straightforward due to limitations in the hydrothermal stability of the particular system under study. The objective of this work is three-fold: 1) reducing the residual Fe in the resulting solid as this can be detrimental for the application of the material, 2) shortening the reaction time by optimizing the reaction temperature to minimize possible particle agglomeration, and finally 3) investigating the structural and textural properties of the resulting material in comparison to the calcined counterparts. It appears that the Fenton detemplation can be optimized by shortening the reaction time significantly at low Fe concentration. The milder conditions of detemplation give rise to enhanced properties in terms of surface area, pore volume, structural preservation, low Fe residue and high degree of surface hydroxylation; the colloidal particles are stable during storage. A relative particle size increase, expressed as 0.11%·h-1, has been determined.

On the stability of conventional and nano-structured carbon-based catalysts in the oxidative dehydrogenation of ethylbenzene under industrially relevant conditions

Relevant carbon-based materials, home-made carbon-silica hybrids, commercial activated carbon, and nanostructured multi-walled carbon nanotubes (MWCNT) were tested in the oxidative dehydrogenation of ethylbenzene (EB). Special attention was given to the reaction conditions, using a relatively concentrated EB feed (10 vol.% EB), and limited excess of O2 (O 2:EB = 0.6) in order to work at full oxygen conversion and consequently avoid O2 in the downstream processing and recycle streams. The temperature was varied between 425 and 475 °C, that is about 150-200 °C lower than that of the commercial steam dehydrogenation process. The stability was evaluated from runs of 60 h time on stream. Under the applied reactions conditions, all the carbon-based materials are apparently stable in the first 15 h time on stream. The effect of the gasification/burning was significantly visible only after this period where most of them fully decomposes. The carbon of the hybrids decomposes completely rendering the silica matrix and the activated carbon bed is fully consumed. Nano structured MWCNT is the most stable; the structure resists the demanding reaction conditions showing an EB conversion of ∼30% (but deactivating) with a steady selectivity of ∼80%. The catalyst stability under the ODH reaction conditions is predicted from the combustion apparent activation energies. © 2014 Elsevier Ltd. All rights reserved.

Coke formation in the oxidative dehydrogenation of ethylbenzene to styrene by TEOM

A packed bed microbalance reactor setup (TEOM-GC) is used to investigate the formation of coke as a function of time-on-stream on γ-Al2O3 and 3P/SiO2 catalyst samples under different conditions for the ODH reaction of ethylbenzene to styrene. All samples show a linear correlation of the styrene selectivity and yield with the initial coverage of coke. The COX production increases with the coverage of coke. On the 3 wt% P/SiO2 sample, the initial coke build-up is slow and the coke deposition rate increases with time. On alumina-based catalyst samples, a fast initial coke build-up takes place, decreasing with time-on-stream, but the amount of coke does not stabilize. A higher O2 : EB feed ratio results in more coke, and a higher temperature results in less coke. This coking behaviour of Al2O3 can be described by existing "monolayer-multilayer" models. Further, the coverage of coke on the catalyst varies with the position in the bed. For maximal styrene selectivity, the optimal coverage of coke should be sufficient to convert all O2, but as low as possible to prevent selectivity loss by COX production. This is in favour of high temperature and low O2 : EB feed ratios. The optimal coke coverage depends in a complex way on all the parameters: temperature, the O2 : EB feed ratio, reactant concentrations, and the type of starting material. This journal is