Manufacture of controlled emulsions and particulates using membrane emulsification

Crossflow and rotating membrane emulsification techniques were used for making oil-in-water (O/W) emulsions. The emulsions produced from a variety of oils and monomers (viscosity 7–528 mPas) exhibited narrow size distributions over a wide droplet size range, with the average droplet size ranging from less than 1 µm up to 500 µm. The monomer emulsions were further encapsulated to produce microcapsules through subsequent polymerisation reactions. The monodispersity feature of the primary emulsions was retained after the encapsulation. In comparison with other homogenisation methods, our experimental results demonstrated that the membrane emulsification technique is not only superior in emulsion droplet size controls, but also advantageous in energy efficiency and industrial-scale productions.

Pyrolysis of contaminated energy crops and the characterisation of the gained biochar

The simultaneous use of willow as a vegetation filter and an energy crop can respond both to the increasing energy demand and to the problem of the soil and water contamination. Its characteristics guarantee that the resources are used economically. As a vegetation filter, willow uptakes organic and inorganic contaminants. As a fast growing energy crop it meets the requirements of rural areas without the exploitation of existing forestry. The aim of the research was to gather knowledge on the thermal behaviour of willow, uptaking contaminants and then used as an energy crop. For this reason pyrolysis experiments were performed in two different scales. In analytical scale metal-contaminated wood was investigated and bench scale pyrolysis experiments were performed with nitrogen-enriched willow, originated from a wastewater treatment plant. Results of the pyrolysis showed that 51-81 % of the wastewater derived nitrogen of willow was captured in the char product. Char had low surface area (1.4 to 5.4 m2/g), low bulk density (0.15–0.18 g/cm3), high pH values (7.8–9.4) and high water-holding capacity (1.8 to 4.3 cm3/g) while the bioavailability of char nutrients was low. Links were also established between the pyrolysis temperature and the product properties for maximising the biochar provided benefits for soil applications. Results also showed that the metal binding capacity of wood varied from one metal ion to another, char yield increased and levoglucosan yield decreased in their presence. While char yield was mainly affected by the concentration of the metal ions, levoglucosan yield was more dependent on the type of the ionic species. Combustion experiments were also carried out with metal-enriched char. The burnout temperatures, estimated ignition indices and the conversion indicate that the metal ions type and not the amount were the determining factors during the combustion. Results presented in the Thesis provide better understanding on the thermal behaviour of nitrogen-enriched and metal contaminated biomass which is crucial to design effective pyrolysis units and combustors. These findings are relevant for pyrolysis experiments, where the goal is to yield char for energetic or soil applications.

Advanced manufacturing technology, work design, and performance:a change study

Two alternative work designs are identified for operators of stand-alone advanced manufacturing technology (AMT). In the case of specialist control, operators are limited to running and monitoring the technology, with operating problems handled by specialists, such as engineers. In the case of operator control, operators are given much broader responsibilities and deal directly with the majority of operating problems encountered. The hypothesis that operator control would promote better performance and psychological well-being than would specialist control (which is more prevalent) was tested in a longitudinal field study involving work redesign for operators of computer-controlled assembly machines. Change from specialist to operator control reduced downtime, especially for high-variance systems, and was associated with greater intrinsic job satisfaction and less perceived work pressure. The implications of these findings for both small and large-scale applications of AMT are discussed.

Novel biomass conversion routes:ammonia from biomass, and marine macroalgae for energy

This thesis presents a techno-economic investigation of the generation of electricity from marine macroalgae (seaweed) in the UK (Part 1), and the production of anhydrous ammonia from synthesis gas (syngas) generated from biomass gasification (Part 2). In Part 1, the study covers the costs from macroalgae production to the generation of electricity via a CHP system. Seven scenarios, which varied the scale and production technique, were investigated to determine the most suitable scale of operation for the UK. Anaerobic digestion was established as the most suitable technology for macroalgae conversion to CHP, based on a number of criteria. All performance and cost data have been taken from published literature. None of the scenarios assessed would be economically viable under present conditions, although the use of large-scale electricity generation has more potential than small-scale localised production. Part 2 covers the costs from the delivery of the wood chip feedstock to the production of ammonia. Four cases, which varied the gasification process used and the scale of production, were investigated to determine the most suitable scale of operation for the UK. Two gasification processes were considered, these were O2-enriched air entrained flow gasification and Fast Internal Circulating Fluidised Bed. All performance and cost data have been taken from published literature, unless otherwise stated. Large-scale (1,200 tpd) ammonia production using O2-enriched air entrained flow gasification was determined as the most suitable system, producing the lowest ammonia-selling price, which was competitive to fossil fuels. Large-scale (1,200 tpd) combined natural gas/biomass syngas ammonia production also generated ammonia at a price competitive to fossil fuels.

Thermochemical characterisation of various biomass feedstock and bio-oil generated by fast pyrolysis

The projected decline in fossil fuel availability, environmental concerns, and security of supply attract increased interest in renewable energy derived from biomass. Fast pyrolysis is a possible thermochemical conversion route for the production of bio-oil, with promising advantages. The purpose of the experiments reported in this thesis was to extend our understanding of the fast pyrolysis process for straw, perennial grasses and hardwoods, and the implications of selective pyrolysis, crop harvest and storage on the thermal decomposition products. To this end, characterisation and laboratory-scale fast pyrolysis were conducted on the available feedstocks, and their products were compared. The variation in light and medium volatile decomposition products was investigated at different pyrolysis temperatures and heating rates, and a comparison of fast and slow pyrolysis products was conducted. Feedstocks from different harvests, storage durations and locations were characterised and compared in terms of their fuel and chemical properties. A range of analytical (e.g. Py-GC-MS and TGA) and processing equipment (0.3 kg/h and 1.0 kg/h fast pyrolysis reactors and 0.15 kg slow pyrolysis reactor) was used. Findings show that the high bio-oil and char heating value, and low water content of willow short rotation coppice (SRC) make this crop attractive for fast pyrolysis processing compared to the other investigated feedstocks in this project. From the analytical sequential investigation of willow SRC, it was found that the volatile product distribution can be tailored to achieve a better final product, by a variation of the heating rate and temperature. Time of harvest was most influential on the fuel properties of miscanthus; overall the late harvest produced the best fuel properties (high HHV, low moisture content, high volatile content, low ash content), and storage of the feedstock reduced the moisture and acid content.

Impact of suspected food allergy on emotional distress and family life of parents prior to allergy diagnosis

Background: Food allergy is associated with psychological distress in both child and parent. It is unknown whether parental distress is present prior to clinical diagnosis or whether experiences at clinic can reduce any distress present. This study aimed to assess anxiety and depression in parents and the impact of suspected food allergy on the lives of families before and after a visit to an allergy clinic. Methods: One hundred and twenty-four parents visiting an allergy clinic for the first time to have their child assessed for food allergy completed a study-specific questionnaire and the Hospital Anxiety and Depression Scale; 50 parents completed these 4-6 wk later in their own home. Results: Most parents (86.4%) reported suspected food allergy had an impact on their family life prior to clinic attendance; 76% had made changes to their child's diet. 32.5% of parents had mild-to-severe anxiety before their clinic visit; 17.5% had mild-to-moderate depression. Post-clinic, 40% had mild-to-severe anxiety; 13.1% had mild-to-moderate depression. There were no significant differences in anxiety (p = 0.34) or depression scores (p = 0.09) before and after the clinic visit. Conclusions: Anxiety and depression is present in a small proportion of parents prior to diagnosis of food allergy in their child and this does not reduce in the short term after the clinic visit. Identification of parents at risk of suffering from distress is needed and ways in which we communicate allergy information before and at clinic should be investigated to see if we can reduce distress. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Glass fragility and atomic ordering on the intermediate and extended range

The relation between the fragility of glass-forming systems, a parameter which describes many of their key physical characteristics, and atomic scale structure is investigated by using neutron diffraction to measure the topological and chemical ordering for germania, or GeO2, which is an archetypal strong glass former. We find that the ordering for this and other tetrahedral network-forming glasses at distances greater than the nearest neighbor can be rationalized in terms of an interplay between the relative importance of two length scales. One of these is associated with an intermediate range, the other with an extended range and, with increasing glass fragility, it is the extended range ordering which dominates.

Effects of extreme weather events on SMEs:a literature review and synthesis

Small and Medium-scale Enterprises (SMEs), which generate more than one half of the employment (58.9%) and turnover (51.9%), form an important sector of the UK economy. Although they are the main drivers of the UK economy, they are also said to be the most vulnerable to the impacts of Extreme Weather Events (EWEs). The world in recent years has experienced a significant number of EWEs, and SMEs have suffered significant economic losses as a result. The now apparent climate change, which is mostly attributed to human interference with the environment over the past few decades, is believed to have a strong link with the increase of EWEs in the recent past. Threats of EWEs are expected to further increase due to their increased frequency and magnitude and increased vulnerability to their effects. Interestingly, EWEs seem to present businesses with various business opportunities and positive consequences as well, besides the much feared and overwhelming threats and negative consequences they present. Understanding such impacts has become a necessity to improve the resilience of SMEs so that they will be better prepared to minimise the negative consequences and maximise the positive consequences posed by EWEs. This paper attempts to bring together and evaluate the current knowledge with regard to the effects of EWEs on SMEs. The paper establishes the case for more in-depth study with this regard and concludes by stressing the need for improving the resilience of SMEs to EWEs.

Predicting the effect of mixing on oxygen transfer and nutrient removal in activated sludge basins

Activated sludge basins (ASBs) are a key-step in wastewater treatment processes that are used to eliminate biodegradable pollution from the water discharged to the natural environment. Bacteria found in the activated sludge consume and assimilate nutrients such as carbon, nitrogen and phosphorous under specific environmental conditions. However, applying the appropriate agitation and aeration regimes to supply the environmental conditions to promote the growth of the bacteria is not easy. The agitation and aeration regimes that are applied to activated sludge basins have a strong influence on the efficacy of wastewater treatment processes. The major aims of agitation by submersible mixers are to improve the contact between biomass and wastewater and the prevention of biomass settling. They induce a horizontal flow in the oxidation ditch, which can be quantified by the mean horizontal velocity. Mean values of 0.3-0.35 m s-1 are recommended as a design criteria to ensure best conditions for mixing and aeration (Da Silva, 1994). To give circulation velocities of this order of magnitude, the positioning and types of mixers are chosen from the plant constructors' experience and the suppliers' data for the impellers. Some case studies of existing plants have shown that measured velocities were not in the range that was specified in the plant design. This illustrates that there is still a need for design and diagnosis approach to improve process reliability by eliminating or reducing the number of short circuits, dead zones, zones of inefficient mixing and poor aeration. The objective of the aeration is to facilitate the quick degradation of pollutants by bacterial growth. To achieve these objectives a wastewater treatment plant must be adequately aerated; thus resulting in 60-80% of all energetic consummation being dedicated to the aeration alone (Juspin and Vasel, 2000). An earlier study (Gillot et al., 1997) has illustrated the influence that hydrodynamics have on the aeration performance as measure by the oxygen transfer coefficient. Therefore, optimising the agitation and aeration systems can enhance the oxygen transfer coefficient and consequently reduce the operating costs of the wastewater treatment plant. It is critically important to correctly estimate the mass transfer coefficient as any errors could result in the simulations of biological activity not being physically representative. Therefore, the transfer process was rigorously examined in several different types of process equipment to determine the impact that different hydrodynamic regimes and liquid-side film transfer coefficients have on the gas phase and the mass transfer of oxygen. To model the biological activity occurring in ASBs, several generic biochemical reaction models have been developed to characterise different biochemical reaction processes that are known as Activated Sludge Models, ASM (Henze et al., 2000). The ASM1 protocol was selected to characterise the impact of aeration on the bacteria consuming and assimilating ammonia and nitrate in the wastewater. However, one drawback of ASM protocols is that the hydrodynamics are assumed to be uniform by the use of perfectly mixed, plug flow reactors or as a number of perfectly mixed reactors in series. This makes it very difficult to identify the influence of mixing and aeration on oxygen mass transfer and biological activity. Therefore, to account for the impact of local gas-liquid mixing regime on the biochemical activity Computational Fluid Dynamics (CFD) was used by applying the individual ASM1 reaction equations as the source terms to a number of scalar equations. Thus, the application of ASM1 to CFD (FLUENT) enabled the investigation of the oxygen transfer efficiency and the carbon & nitrogen biological removal in pilot (7.5 cubic metres) and plant scale (6000 cubic metres) ASBs. Both studies have been used to validate the effect that the hydrodynamic regime has on oxygen mass transfer (the circulation velocity and mass transfer coefficient) and the effect that this had on the biological activity on pollutants such as ammonia and nitrate (Cartland Glover et al., 2005). The work presented here is one part to of an overall approach for improving the understanding of ASBs and the impact that they have in terms of the hydraulic and biological performance on the overall wastewater treatment process. References CARTLAND GLOVER G., PRINTEMPS C., ESSEMIANI K., MEINHOLD J., (2005) Modelling of wastewater treatment plants ? How far shall we go with sophisticated modelling tools? 3rd IWA Leading-Edge Conference & Exhibition on Water and Wastewater Treatment Technologies, 6-8 June 2005, Sapporo, Japan DA SILVA G. (1994). Eléments d'optimisation du transfert d'oxygène par fines bulles et agitateur séparé en chenal d'oxydation. PhD Thesis. CEMAGREF Antony ? France. GILLOT S., DERONZIER G., HEDUIT A. (1997). Oxygen transfer under process conditions in an oxidation ditch equipped with fine bubble diffusers and slow speed mixers. WEFTEC, Chicago, USA. HENZE M., GUJER W., MINO T., van LOOSDRECHT M., (2000). Activated Sludge Models ASM1, ASM2, ASM2D and ASM3, Scientific and Technical Report No. 9. IWA Publishing, London, UK. JUSPIN H., VASEL J.-L. (2000). Influence of hydrodynamics on oxygen transfer in the activated sludge process. IWA, Paris - France.

The Birmingham relationship continuity measure:the development and evaluation of a measure of the perceived continuity of spousal relationships in dementia

Background: Qualitative research has suggested that spousal carers of someone with dementia differ in terms of whether they perceive their relationship with that person as continuous with the premorbid relationship or as radically different, and that a perception of continuity may be associated with more person-centered care and the experience of fewer of the negative emotions associated with caring. The aim of the study was to develop and evaluate a quantitative measure of the extent to which spousal carers perceive the relationship to be continuous. Methods: An initial pool of 42 questionnaire items was generated on the basis of the qualitative research about relationship continuity. These were completed by 51 spousal carers and item analysis was used to reduce the pool to 23 items. The retained items, comprising five subscales, were then administered to a second sample of 84 spousal carers, and the questionnaire's reliability, discriminative power, and validity were evaluated. Results: The questionnaire showed good reliability: Cronbach's α for the full scale was 0.947, and test-retest reliability was 0.932. Ferguson's δ was 0.987, indicating good discriminative power. Evidence of construct validity was provided by predicted patterns of subscale correlations with the Closeness and Conflict Scale and the Marwit-Meuser Caregiver Grief Inventory. Conclusion: Initial psychometric evaluation of the measure was encouraging. The measure provides a quantitative means of investigating ideas from qualitative research about the role of relationship continuity in influencing how spousal carers provide care and how they react emotionally to their caring role. © 2012 International Psychogeriatric Association.

Stochasticity, periodicity and localized light structures in partially mode-locked fibre lasers

Physical systems with co-existence and interplay of processes featuring distinct spatio-temporal scales are found in various research areas ranging from studies of brain activity to astrophysics. The complexity of such systems makes their theoretical and experimental analysis technically and conceptually challenging. Here, we discovered that while radiation of partially mode-locked fibre lasers is stochastic and intermittent on a short time scale, it exhibits non-trivial periodicity and long-scale correlations over slow evolution from one round-trip to another. A new technique for evolution mapping of intensity autocorrelation function has enabled us to reveal a variety of localized spatio-temporal structures and to experimentally study their symbiotic co-existence with stochastic radiation. Real-time characterization of dynamical spatio-temporal regimes of laser operation is set to bring new insights into rich underlying nonlinear physics of practical active- and passive-cavity photonic systems.

The influence of eating psychopathology on autobiographical memory specificity and social problem-solving

The primary aim was to examine to influence of subclinical disordered eating on autobiographical memory specificity (AMS) and social problem solving (SPS). A further aim was to establish if AMS mediated the relationship between eating psychopathology and SPS. A non-clinical sample of 52 females completed the autobiographical memory test (AMT), where they were asked to retrieve specific memories of events from their past in response to cue words, and the means-end problem-solving task (MEPS), where they were asked to generate means of solving a series of social problems. Participants also completed the Eating Disorders Inventory (EDI) and Hospital Anxiety and Depression Scale. After controlling for mood, high scores on the EDI subscales, particularly Drive-for-Thinness, were associated with the retrieval of fewer specific and a greater proportion of categorical memories on the AMT and with the generation of fewer and less effective means on the MEPS. Memory specificity fully mediated the relationship between eating psychopathology and SPS. These findings have implications for individuals exhibiting high levels of disordered eating, as poor AMS and SPS are likely to impact negatively on their psychological wellbeing and everyday social functioning and could represent a risk factor for the development of clinically significant eating disorders.

Parental confidence in managing food allergy:development of the Food Allergy Self-Efficacy Scale for parents (FASE-P)

Background: Food allergy is often a life-long condition that requires constant vigilance in order to prevent accidental exposure and avoid potentially life-threatening symptoms. Parents’ confidence in managing their child’s food allergy may relate to the poor quality of life anxiety and worry reported by parents of food allergic children. Objective: The aim of the current study was to develop and validate the first scale to measure parental confidence (self-efficacy) in managing food allergy in their child. Methods: The Food Allergy Self-Efficacy Scale for Parents (FASE-P) was developed through interviews with 53 parents, consultation of the literature and experts in the area. The FASE-P was then completed by 434 parents of food allergic children from a general population sample in addition to the General Self-Efficacy Scale (GSES), the Food Allergy Quality of Life Parental Burden Scale (FAQL-PB), the General Health Questionnaire (GHQ12) and the Food Allergy Impact Measure (FAIM). A total of 250 parents completed the re-test of the FASE-P. Results: Factor and reliability analysis resulted in a 21 item scale with 5 sub-scales. The overall scale and sub-scales has good to excellent internal consistency (α’s of 0.63-0.89) and the scale is stable over time. There were low to moderate significant correlations with the GSES, FAIM and GHQ12 and strong correlations with the FAQL-PB, with better parental confidence relating to better general self-efficacy, better quality of life and better mental health in the parent. Poorer self-efficacy was related to egg and milk allergy; self-efficacy was not related to severity of allergy. Conclusions and clinical relevance: The FASE-P is a reliable and valid scale for use with parents from a general population. Its application within clinical settings could aid provision of advice and improve targeted interventions by identifying areas where parents have less confidence in managing their child’s food allergy.

Brief report:effects of sensory sensitivity and intolerance of uncertainty on anxiety in mothers of children with autism spectrum disorder

This study examined the relations between anxiety and individual characteristics of sensory sensitivity (SS) and intolerance of uncertainty (IU) in mothers of children with ASD. The mothers of 50 children completed the Hospital Anxiety and Depression Scale, the Highly Sensitive Person Scale and the IU Scale. Anxiety was associated with both SS and IU and IU was also associated with SS. Mediation analyses showed direct effects between anxiety and both IU and SS but a significant indirect effect was found only in the model in which IU mediated between SS. This is the first study to characterize the nature of the IU and SS interrelation in predicting levels of anxiety.

The influence of alexithymia and mood on eating psychopathology in a non-clinical female sample

It has been demonstrated that clinical and subclinical disor- dered eating are associated with elevated levels of depression and the personality trait alexithymia (ALX). ALX means literally lack of words for emotion and is associated with a difficulty identifying and describing feelings, and with an externally oriented cognitive style. The aim of the current study was to examine the inter-relationships between mood and ALX in accounting for variations in non-clinical eating psychopathology. 124 females were assessed on the 20- item Toronto Alexithymia Scale (TAS-20), the Hospital Anxiety and Depression Scale (HADS) and the Eating Disorders Inventory (EDI). Results revealed that EDI scores were positively associated with scores on the TAS-20 and with scores on the depression and anxi- ety subscales of the HADS. A series of stepwise multiple regressions revealed that depression and ALX accounted for 53% of the variance in total EDI scores and 40% of the variance in scores on the drive- for-thinness subscale of the EDI. Scores on the bulimia and body dissatisfaction subscales were predicted by the mood scores only. In conclusion, ALX and mood may contribute, alone and in combi- nation, to the development of some forms of disordered eating.