The performance of stabilized and unstabilized minestone in an aqueous environment with emphasis on its erosion resistance

Britain's sea and flood defences are becoming increasingly aged and as a consequence, more fragile and vulnerable. As the government's philosophy on resources shifts against the use of prime quarried and dredged geo-materials, the need to find alternative bulk materials to bolster Britain's prone defences becomes more pressing. One conceivable source for such a material is colliery waste or minestone. Although a plethora of erosion-abrasion studies have been carried out on soils and soil-cements, very little research has been undertaken to determine the resistance of minestone and its cement stabilized form to the effects of water erosion. The thesis reviews the current extent to which soil-cements, minestone and cement stabilized minestone (CSM) have been employed for hydraulic construction projects. A synopsis is also given on the effects of immersion on shales, mudstones and minestone, especially with regard to the phenomena of slaking. A laboratory study was undertaken featuring a selection of minestones from several British coalfields. The stability of minestone and CSM in sea water and distilled water was assessed using slaking tests and immersion monitoring and the bearing on the use of these materials for hydraulic construction is discussed. Following a review of current erosion apparatus, the erosion/abrasion test and rotating cylinder device were chosen and employed to assess the erosion resistance of minestone and CSM. Comparison was made with a sand mix designed to represent a dredged sand, the more traditional, bulk hydraulic construction material. The results of the erosion study suggest that both minestone and CSM were more resistant to erosion and abrasion than equivalently treated sand mixes. The greater resistance of minestone to the agents of erosion and abrasion is attributed to several factors including the size of the particles, a greater degree of cement bonding and the ability of the minestone aggregate to absorb, rather than transmit shock waves produced by impacting abrasive particles. Although minestone is shown to be highly unstable when subjected to cyclic changes in its moisture content, the study suggests that even in an intertidal regime where cyclic immersion does takes place, minestone will retain sufficient moisture within its fabric to prevent slaking from taking place. The slaking study reveals a close relationship between slaking susceptibility and total pore surface area as revealed by porosimetry. The immersion study shows that although the fabric of CSM is rapidly attacked in sea water, a high degree of the disruption is associated with the edges and corners of samples (ie. free surface) while the integrity of the internal fabric remains relatively intact. CSM samples were shown to be resilient when subjected to immersion in distilled water. An overall assessment of minestone and CSM would suggest that with the implementation of judicious selection and appropriate quality control they could be used as alternative materials for flood and sea defences. It is believed, that even in the harsh regime of a marine environment, CSM could be employed for temporary and sacrificial schemes.

Design and function of trilobite exoskeletons

The fossil arthropod Class Trilobita is characterised by the possession of a highly mineralised dorsal exoskeleton with an incurved marginal flange (doublure). This cuticle is usually the only part of the organism to be preserved. Despite the common occurrence of trilobites in Palaeozoic sediments, the original exoskeletal mineralogy has not been determined previously. Petrographic data involving over seventy trilobite species, ranging in age from Cambrian to Devonian, together with atomic absorption and stable isotope analyses, indicate a primary low-magnesian calcite composition. Trilobite cuticles exhibit a variety of preservational textures which are related to the different diagenetic realms through which they have passed. A greater knowledge of post-depositional processes and the specific features they produce, has enabled post-mortem artefacts to be distinguished from primary cuticular microstructures. Alterations of the cuticle can either enhance or destroy primary features, and their effects are best observed in thin-sections, both under transmitted light and cathodoluminescence. Well-preserved trilobites often retain primary microstructures such as laminations, canals, and tubercles. These have been examined in stained thin-sections and by scanning electron microscopy, from as wide a range of trilobites as possible. Construction of sensory field maps has shown that although the basic organisation of the exoskeleton is the same in all trilobites, the types of microstructures found, and their distribution is species-specific. The composition, microstructure, and architecture of the trilobite exoskeleton have also been studied from a biomechanical viewpoint. Total cuticle thickness, and the relative proportions of the different layers, together with the overall architecture all affected the mechanical properties of the exoskeleton.

The role of the English language in the context of national development vision 2025 with specific reference to agriculture in Tanzania

After thirty years of vacillation, the Tanzanian government has made a firm decision to Swahilize its secondary education system. It has also embarked on an ambitious economic and social development programme (Vision 2025) to transform its peasant society into a modern agricultural community. However, there is a faction in Tanzania opposed to Kiswahili as the medium of education. Already many members of the middle and upper class their children to English medium primary schools to avoid the Kiswahili medium public schools and to prepare their children for the English medium secondary system presently in place. Within the education system, particularly at university level, there is a desire to maintain English as the medium of education. English is seen to provide access to the international scientific community, to cutting edge technology and to the global economy. My interest in this conflict of interests stems from several years' experience teaching English to students at Sokoine University of Agriculture. Students specialise in agriculture and are expected to work with the peasant population on graduation. The students experience difficulties studying in English and then find their Kiswahili skills insufficient to explain to farmers the new techniques and technologies that they have studied in English. They are hampered by a complex triglossic situation in which they use their mother tongue with family and friends, Kiswahili, the national language for early education and most public communication within Tanzania, and English for advanced studies. My aim in this thesis was - to study the language policy in Tanzania and see how it is understood and implemented; - to examine the attitudes towards the various languages and their various roles; - to investigate actual language behaviour in Tanzanian higher education. My conclusion is that the dysfunctionality of the present study has to be addressed. Diglossic public life in Tanzania has to be accommodated. The only solution appears to be a compromise, namely a bilingual education system which supports from all cases of society by using Kiswahili, together with an early introduction of English and its promotion as a privileged foreign language, so that Tanzania can continue to develop internally through Kiswahili and at the same time retain access to the globalising world through the medium of English.

Preparation, optimisation and characterisation of lyophilised rapid disintegrating tablets based on gelatin and saccharide

Despite recent success, rapidly disintegrating lyophilized tablets still face problems of low mechanical strength and higher disintegration times resulting in poor patient compliance. The aim of the current work was to carry out a systematic study to understand the factors controlling mechanical properties of these formulations. The work investigated the influence of two bloom strengths of gelatin: low (60 bloom) and high (225 bloom) at different stock solution concentrations (2, 5, 7.5, and 10 %w/w). This was followed by investigation of addition of five saccharides (xylitol, glucose, trehalose, maltotriose and mannitol) at varied concentration range (10-80 %w/w) to decipher their influence on disintegration time, mechanical and thermal properties of the formulation. The results indicated that the disintegration time of the tablets dramatically decreased by decreasing the concentration and bloom strength of gelatin in the stock solution. However the mechanical properties of the tablets were mainly influenced by the concentration of gelatin rather than the bloom strength. The addition of saccharides resulted in enhancement of tablet properties and was concentration dependent. All the saccharides improved the fractubility of the tablets significantly at high concentration (equal or higher than 40% w/w). However, only high concentration (equal or higher than 40% w/w) of trehalose, maltotriose and mannitol significantly enhanced the hardness. Additionally, mannitol crytallised during freeze drying and consequently produced elegant tablets, whilst the other saccarides exhibited lyoprotectant activity as they were able to retain amorphous status. Based on the above findings, an optimized formulation was also successfully developed and characterized to deliver 100 microg dose of Clonidine HCl.

Bayesian data assimilation

This thesis addresses data assimilation, which typically refers to the estimation of the state of a physical system given a model and observations, and its application to short-term precipitation forecasting. A general introduction to data assimilation is given, both from a deterministic and' stochastic point of view. Data assimilation algorithms are reviewed, in the static case (when no dynamics are involved), then in the dynamic case. A double experiment on two non-linear models, the Lorenz 63 and the Lorenz 96 models, is run and the comparative performance of the methods is discussed in terms of quality of the assimilation, robustness "in the non-linear regime and computational time. Following the general review and analysis, data assimilation is discussed in the particular context of very short-term rainfall forecasting (nowcasting) using radar images. An extended Bayesian precipitation nowcasting model is introduced. The model is stochastic in nature and relies on the spatial decomposition of the rainfall field into rain "cells". Radar observations are assimilated using a Variational Bayesian method in which the true posterior distribution of the parameters is approximated by a more tractable distribution. The motion of the cells is captured by a 20 Gaussian process. The model is tested on two precipitation events, the first dominated by convective showers, the second by precipitation fronts. Several deterministic and probabilistic validation methods are applied and the model is shown to retain reasonable prediction skill at up to 3 hours lead time. Extensions to the model are discussed.

Multispectral imaging of the ocular fundus using light emitting diode illumination

We present an imaging system based on light emitting diode (LED) illumination that produces multispectral optical images of the human ocular fundus. It uses a conventional fundus camera equipped with a high power LED light source and a highly sensitive electron-multiplying charge coupled device camera. It is able to take pictures at a series of wavelengths in rapid succession at short exposure times, thereby eliminating the image shift introduced by natural eye movements (saccades). In contrast with snapshot systems the images retain full spatial resolution. The system is not suitable for applications where the full spectral resolution is required as it uses discrete wavebands for illumination. This is not a problem in retinal imaging where the use of selected wavelengths is common. The modular nature of the light source allows new wavelengths to be introduced easily and at low cost. The use of wavelength-specific LEDs as a source is preferable to white light illumination and subsequent filtering of the remitted light as it minimizes the total light exposure of the subject. The system is controlled via a graphical user interface that enables flexible control of intensity, duration, and sequencing of sources in synchrony with the camera. Our initial experiments indicate that the system can acquire multispectral image sequences of the human retina at exposure times of 0.05 s in the range of 500-620 nm with mean signal to noise ratio of 17 dB (min 11, std 4.5), making it suitable for quantitative analysis with application to the diagnosis and screening of eye diseases such as diabetic retinopathy and age-related macular degeneration.

Servitization within manufacturing:exploring the provision of advanced services and their impact on vertical integration

Purpose – The debate about services-led competitive strategies continues to grow, with much interest emerging around the differing practices between production and servitized operations. The purpose of this paper is to contribute to this discussion by investigating the vertical integration practice (in particular the micro-vertical integration, otherwise known as the supply chain position) of manufacturers who are successful in their adoption of servitization. Design/methodology/approach – To achieve this the authors have investigated a cross-section of four companies which are successfully delivering advanced services coupled to their products. Findings – Manufacturers who have embraced the servitization trend tend to retain capabilities in design and production, and do so because this benefits their speed, effectiveness and costs of supporting assets on advanced services contracts. Research limitations/implications – These are preliminary findings from a longer term research programme. Practical implications – Through this research note the authors seek to simultaneously contribute to the debate in the research community and offer guidance to practitioners exploring the consequences of servitization. Originality/value – Successful servitization demands that manufacturers adopt new and alternative practices and technologies to those traditionally associated with production operations. A prevailing challenge is to understand these differences and their underpinning rationale. Therefore, in this research note, the authors report on the practices of four case companies, explore the rationale underpinning these, and propose an hypothesis for the impact on vertical integration of successful servitization.

'Family' ownership, tunnelling and earnings management:a review of the literature

In this review paper, we bring together a number of aspects of family firms that are ubiquitous in a number of institutional contexts, often as part of larger business groups. We pay particular attention to the mechanisms by which families retain control over firms, and the incentives of the families in control to expropriate other stakeholders by way of tunnelling. We examine the role of earnings management in facilitating tunnelling, and evidence about the incidence of earnings management in family firms. Our review suggests that while the literature on these aspects of family control is rich, the contexts in which the empirical exercises are undertaken are relatively few, and hence there is considerable opportunity to expand it to other contexts, in particular in the form of cross-country comparisons of the relative impact of agency conflicts and institutions on these issues.

Liposome (Lipodine™)-mediated DNA vaccination by the oral route

Plasmid DNA pRc/CMV HBS encoding the S (small) region of hepatitis B surface antigen (HBsAg) was incorporated by the dehydration-rehydration method into Lipodine™ liposomes composed of 16 μmoles phosphatidylcholine (PC) or distearoyl phosphatidylcholine (DSPC), 8 μmoles of (dioleoyl phosphatidylethanolamine (DOPE) or cholesterol and 4 μmoles of the cationic lipid 1,2-dioleoyl-3-(trimethylammonium propane (DOTAP) (molar ratios 1:0.5:0.25). Incorporation efficiency was high (89-93% of the amount of DNA used) in all four formulations tested and incorporated DNA was shown to be resistant to displacement in the presence of the competing anionic sodium dodecyl sulphate molecules. This is consistent with the notion that most of the DNA is incorporated within the multilamellar vesicles structure rather than being vesicle surface-complexed. Stability studies performed in simulated intestinal media also demonstrated that dehydration-rehydration vesicles (DRV) incorporating DNA (DRV(DNA)) were able to retain significantly more of their DNA content compared to DNA complexed with preformed small unilamellar vesicles (SUV-DNA) of the same composition. Moreover, after 4h incubation in the media, DNA loss for DSPC DRV(DNA) was only minimal, suggesting this to be the most stable formulation. Oral (intragastric) liposome-mediated DNA immunisation studies employing a variety of DRV(DNA) formulations as well as naked DNA revealed that secreted IgA responses against the encoded HBsAg were (as early as three weeks after the first dose) substantially higher after dosing with 100 μg liposome-entrapped DNA compared to naked DNA. Throughout the fourteen week investigation, IgA responses in mice were consistently higher with the DSPC DRV(DNA) liposomes compared to naked DNA and correlated well with their improved DNA retention when exposed to model intestinal fluids. To investigate gene expression after oral (intragastric) administration, mice were given 100 μg of naked or DSPC DRV liposome-entrapped plasmid DNA expressing the enhanced green fluorescent protein (pCMV.EGFP). Expression of the gene, in terms of fluorescence intensity in the draining mesenteric lymph nodes, was much greater in mice dosed with liposomal DNA than in animals dosed with the naked DNA. These results suggest that DSPC DRV liposomes containing DNA (Lipodine™) may be a useful system for the oral delivery of DNA vaccines.

Getting marketing back in the boardroom:understanding the drivers of marketing's influence within the firm

As many strategically important aspects of marketing are addressed by other functions in the organization, the decreased influence of the marketing department within companies is a topic of growing debate. In this study, the authors investigate this diminished influence and assess its determinants and consequences. They interviewed 25 marketing and finance executives from leading Dutch firms. They also conducted a large-scale Internet-based survey of several hundred marketing, finance, and general managers. Their results show that accountability and the innovativeness of the marketing department are the major drivers of the marketing department’s influence. They also demonstrate that a firm’s short-term orientation is negatively related to the influence of the marketing department. Marketing influence is positively related to market orientation, which is positively related to firm performance. Their results do not support prior findings of a direct positive link between marketing influence and firm performance, which might suggest that there is no need for a strong marketing department. The study suggests that an influential marketing department is relevant primarily when the firm is not market oriented. When firms are market oriented, a less influential marketing department does not lower their performance. Hence, it appears that they can choose to have an influential or noninfluential marketing department without any repercussions for their performance. Marketing activities could move to other functions. The authors suggest that marketing departments should aim to retain their influence. Dispersing marketing decision making among many functions can cause a lack of coordination; customers also lose their advocate within the firm. How can marketing departments regain their influence? The authors suggest two general solutions. First, marketing departments should become more accountable by linking marketing actions and policies with financial results. Marketers should become capable in analytics and finance. Second, they should become more innovative by increasing their share in new product or service concepts. They can do so by using their knowledge of the market and customers to contribute to new product or service development.

Interactions between landcover pattern and geospatial processing methods:effects on landscape metrics and classification accuracy

Remote sensing data is routinely used in ecology to investigate the relationship between landscape pattern as characterised by land use and land cover maps, and ecological processes. Multiple factors related to the representation of geographic phenomenon have been shown to affect characterisation of landscape pattern resulting in spatial uncertainty. This study investigated the effect of the interaction between landscape spatial pattern and geospatial processing methods statistically; unlike most papers which consider the effect of each factor in isolation only. This is important since data used to calculate landscape metrics typically undergo a series of data abstraction processing tasks and are rarely performed in isolation. The geospatial processing methods tested were the aggregation method and the choice of pixel size used to aggregate data. These were compared to two components of landscape pattern, spatial heterogeneity and the proportion of landcover class area. The interactions and their effect on the final landcover map were described using landscape metrics to measure landscape pattern and classification accuracy (response variables). All landscape metrics and classification accuracy were shown to be affected by both landscape pattern and by processing methods. Large variability in the response of those variables and interactions between the explanatory variables were observed. However, even though interactions occurred, this only affected the magnitude of the difference in landscape metric values. Thus, provided that the same processing methods are used, landscapes should retain their ranking when their landscape metrics are compared. For example, highly fragmented landscapes will always have larger values for the landscape metric "number of patches" than less fragmented landscapes. But the magnitude of difference between the landscapes may change and therefore absolute values of landscape metrics may need to be interpreted with caution. The explanatory variables which had the largest effects were spatial heterogeneity and pixel size. These explanatory variables tended to result in large main effects and large interactions. The high variability in the response variables and the interaction of the explanatory variables indicate it would be difficult to make generalisations about the impact of processing on landscape pattern as only two processing methods were tested and it is likely that untested processing methods will potentially result in even greater spatial uncertainty. © 2013 Elsevier B.V.

Investigation of the activation mechanism and structural characterization of the CGRP receptor

The calcitonin gene-related peptide (CGRP) receptor is an unusual G protein-coupled receptor (GPCR) in that it comprises the calcitonin receptor-like receptor (CLR), receptor activity modifying protein 1 (RAMP1) and the receptor component protein (RCP). The RAMP1 has two other homologues – RAMP2 and RAMP3. The endogenous ligand for this receptor is CGRP, a 37 amino acid neuropeptide that act as a vasodilator. This peptide has been implicated in the aetiology of health conditions such as inflammation, Reynaud’s disease and migraine. A clear understanding of the mode of activation of this receptor could be key in developing therapeutic agents for associated health conditions. Although the crystal structure of the N-terminal extracellular domain (ECD) of this receptor (in complex with an antagonist) has been published, the details of receptor-agonist interactions at this domain, and so ultimately the mechanism of receptor activation, are still unclear. Also, the C-terminus of the CLR (in the CGRP receptor), especially around the presumed helix 8 (H8) region, has not been well studied for its role in receptor signalling. This research project investigated these questions. In this study, certain residues making up the putative N-terminal ligand-binding core of the CLR (in the CGRP receptor) were mapped out and found to be crucial for receptor signalling. They included W69 and D70 of the WDG motif in family B GPCRs, as well as Y91, F92, D94 and F95 in loop 2 of CLR N-terminus. Also, F163 at the cytoplasmic end of TM1 and certain residues spanning H8 and associated C-terminal region of CLR were found to be required for CGRP receptor signalling. These residues were investigated by site-directed mutagenesis where they were mutated to alanine (or other residues in specific cases) and the effect of the mutations on receptor pharmacology assessed by evaluating cAMP production, cell surface expression, total cell expression and aCGRP-mediated receptor internalization. Moreover, the N-terminal ECDs of the CLR and RAMPs (RAMP1, RAMP2 and RAMP3) were produced in a yeast host strain (Pichia pastoris) for the purpose of structural interaction study by surface plasmon resonance (SPR). Following expression and purification, these receptor proteins were found to individually retain their secondary structures when analysed by circular dichroism (CD). Results were analysed and interpreted with the knowledge of the secretin family receptor paradigm. The research described in this thesis has produced novel data that contributes to a clearer understanding of CGRP receptor pharmacology. The study on CLR and RAMPs ECDs could be a useful tool in determining novel interacting GPCR partners of RAMPs.

Current issues in international HRM:alternative forms of assignments, careers and talent management in a global context

This special issue is dedicated to examining some current issues in international HRM; it contributes mainly to the field of HRM in the multinational enterprise. However, it clearly also draws on knowledge from cross-cultural IHRM. The guest editors have identified three topics that have gained tremendous importance due to the increasing globalisation of the world economy and the war for internationally qualified talent. This not only applies to multinational enterprises, but also to small and medium-sized enterprises, as senior managers are challenged to attract, retain, and motivate global talent: global assignments, global careers and global talent management. While all fields are not new and have partly been subject to prominent publications (e.g., Scullion & Collings, 2011; Cascio, 2013) new and highly relevant research questions continue to emerge and there is still a lack of empirical research in these areas.

Anisotropic model of kinetic roughening:he strong-coupling regime

We study the strong coupling (SC) limit of the anisotropic Kardar-Parisi-Zhang (KPZ) model. A systematic mapping of the continuum model to its lattice equivalent shows that in the SC limit, anisotropic perturbations destroy all spatial correlations but retain a temporal scaling which shows a remarkable crossover along one of the two spatial directions, the choice of direction depending on the relative strength of anisotropicity. The results agree with exact numerics and are expected to settle the long-standing SC problem of a KPZ model in the infinite range limit. © 2007 The American Physical Society.

The need for wider supply chain management adoption:empirical results from Ireland

Purpose - This paper aims to provide empirical results which suggest that there is a need for more widespread adoption of supply chain management among Irish firms. Design/methodology/approach - The Republic of Ireland is a small, open, trade-dependent economy and is one of the fastest growing economies in the developed world. However, due to rising costs, there is an increasing trend in Ireland to outsource lower function manufacturing processes to lower-cost locations but to retain high-skill functions (such as R&D). This trend, together with other factors such as its peripheral location, suggests that supply chain management is critical from an Irish perspective. In order to gain unique insights of current levels of awareness/adoption of SCM and the potential impact SCM could have on competitiveness, a survey was conducted among 776 Irish firms. Findings - Overall, the findings suggest that many firms in Ireland pay lip-service to the importance of SCM elements and objectives but the majority of firms, about two thirds, have only a passing understanding of what constitutes SCM. Only 25 per cent adopt SCM programmes and only 9 per cent of Irish companies have a specialised SCM or logistics manager. The gaps in their understanding of SCM are matched by the gaps in their awareness of key costs (e.g. 59 per cent of companies do not know their total supply chain costs). While there are supply chain management adopters in Ireland that are already well up the s-curve of innovation transfer, it is the larger group of less aware companies that must become better at how they manage their supply chains. Originality/value - The paper offers a useful insight into supply chain management and its role in Irish industry. © Emerald Group Publishing Limited.