건설 프로젝트 프로세스 관리 효율화를 위한 영국과 미국의 BIM 현황 분석

World-wide efforts have been made to adopt BIM (Building Information Modelling) to improve the efficiency of construction project management processes lively. BIM means a shared digitized expression which provides a reliable source to make an informed decision over a physical or a functional character across all construction sectors including design, civil engineering and plant construction. The Korean Public Procurement Service mandates to use BIM for over 50 billion won public construction projects from 2012, and this will be extended to every project initiated by the Korean Public Procurement Service from 2016. This paper aims not only to investigate potential barriers which can be faced at the initial stage of BIM adoption, but also to explore possible solutions against them. For doing this, the BIM utilization strategies and action plans by US and UK public sectors which adopt BIM earlier than Korea were analysed. Based on the results of comparative analysis between US and UK, the proper guideline for BIM adoption in Korea will be suggested.

Medication errors in mental healthcare:a systematic review

Methods: It has been estimated that medication error harms 1-2% of patients admitted to general hospitals. There has been no previous systematic review of the incidence, cause or type of medication error in mental healthcare services. Methods: A systematic literature search for studies that examined the incidence or cause of medication error in one or more stage(s) of the medication-management process in the setting of a community or hospital-based mental healthcare service was undertaken. The results in the context of the design of the study and the denominator used were examined. Results: All studies examined medication management processes, as opposed to outcomes. The reported rate of error was highest in studies that retrospectively examined drug charts, intermediate in those that relied on reporting by pharmacists to identify error and lowest in those that relied on organisational incident reporting systems. Only a few of the errors identified by the studies caused actual harm, mostly because they were detected and remedial action was taken before the patient received the drug. The focus of the research was on inpatients and prescriptions dispensed by mental health pharmacists. Conclusion: Research about medication error in mental healthcare is limited. In particular, very little is known about the incidence of error in non-hospital settings or about the harm caused by it. Evidence is available from other sources that a substantial number of adverse drug events are caused by psychotropic drugs. Some of these are preventable and might probably, therefore, be due to medication error. On the basis of this and features of the organisation of mental healthcare that might predispose to medication error, priorities for future research are suggested.

Reporting and managing risk:a look at current practice at Tesco, RBS, local and central government

These case studies from CIMA highlight the need to embed risk management within more easily understood behaviours, consistent with the overall organisational culture. In each case, some form of internal audit team provides either an oversight function or acts as an expert link in that feedback loop. Frontline staff, managers and specialists should be completely aligned on risk, in part just to ensure that there is a consistency of approach. They should understand instinctively that good performance includes good risk management. Tesco has continued to thrive during the recession and remains a robust and efficient group of businesses despite the emergence of potential threats around consumer spending and the supply chain. RBS, by contrast, has suffered catastrophic and very public failures of risk management despite a large in-house function and stiff regulation of risk controls. Birmingham City Council, like all local authorities, is adapting to more commercial modes of operation and is facing diverse threats and opportunities emerging as a result of social change. And DCMS, like many other public sector organisations, has to handle an incredibly complex network of delivery partners within the context of a relatively recent overhaul of central government risk management processes. Key Findings: •Risk management is no longer solely a financial discipline, nor is it simply a concern for the internal control function. •Where organisations retain a discrete risk management cadre – often specialists at monitoring and evaluating a range of risks – their success is dependent on embedding risk awareness in the wider culture of the enterprise. •Risk management is most successful when it is explicitly linked to operational performance. •Clear leadership, specific goals, excellent influencing skills and open-mindedness to potential threats and opportunities are essential for effective risk management. •Bureaucratic processes and systems can hamper good risk management – either as a result of a ‘box-ticking mentality’ or because managers and staff believe they do not need to consider risk themselves.

Global HR roles and factors influencing their development:evidence from emerging Indian IT services multinationals

The rapid growth of emerging markets’ multinational companies (MNCs) is a recent phenomenon and, as such, their nature and structure of key management processes, functions, and roles need further examination. While an abundance of low-cost labor is often the starting point of competitive advantage for many of the emerging markets’ MNCs, it is the optimum configuration of people, processes, and technology that defines how they leverage their intangible resources. Based on case studies of four Indian IT services MNCs, involving 51 in-depth interviews of business and human resource (HR) leaders at the corporate and subsidiary levels, we identify five key HR roles—namely, strategic business partner, guardian of culture, builder of global workforce and capabilities, champion of processes, and facilitator of employee development. The analysis also highlights that the HR function in Indian IT service MNCs faces several challenges in consolidating the early gains of internationalization, such as lack of decentralized decision making, developing a global mind-set, localization of the workforce, and developing a global leadership pipeline. Based on our exploratory findings, we propose a framework outlining the global HR roles pursued by emerging IT services MNCs, the factors influencing them, and the challenges facing their HR function for future research.

A Delphi study to explore the adoption of servitization in UK companies

This paper explores and rationalises the process of servitization adoption across manufacturing firms. A Delphi research methodology has been applied to capture evidence and opinion from 33 senior executives, in 28 different sized organisations, from a cross section of British industry. The findings focus on five areas: (1) servitization and advanced services, (2) transformation: stimulus, drivers and organisational change, (3) impact on the customer and manufacturer, (4) enablers and inhibitors and (5) potential for business and the economy. Six findings are presented and collectively these contribute to our understanding of the broader change management processes that transform manufacturers to compete through advanced services.

Business processes and knowledge management

Knowledge has been a subject of interest and inquiry for thousands of years since at least the time of the ancient Greeks, and no doubt even before that. “What is knowledge” continues to be an important topic of discussion in philosophy. More recently, interest in managing knowledge has grown in step with the perception that increasingly we live in a knowledge-based economy. Drucker (1969) is usually credited as being the first to popularize the knowledge-based economy concept by linking the importance of knowledge with rapid technological change in Drucker (1969). Karl Wiig coined the term knowledge management (hereafter KM) for a NATO seminar in 1986, and its popularity took off following the publication of Nonaka and Takeuchi’s book “The Knowledge Creating Company” (Nonaka & Takeuchi, 1995). Knowledge creation is in fact just one of many activities involved in KM. Others include sharing, retaining, refining, and using knowledge. There are many such lists of activities (Holsapple & Joshi, 2000; Probst, Raub, & Romhardt, 1999; Skyrme, 1999; Wiig, De Hoog, & Van der Spek, 1997). Both academic and practical interest in KM has continued to increase throughout the last decade. In this article, first the different types of knowledge are outlined, then comes a discussion of various routes by which knowledge management can be implemented, advocating a process-based route. An explanation follows of how people, processes, and technology need to fit together for effective KM, and some examples of this route in use are given. Finally, there is a look towards the future.

Analysing organisational culture : a critical ethnography of public relations and personnel specialists in a state bureaucracy

Following an introductory chapter, I examine (i) typologies which have differentiated the literature on organisational culture and symbolism (Chapter 2), (ii) the contribution of organisation theory to organisation culture (Chapter 3), and (iii) recent literature on organisational culture and symbolism (Chapter 4). Within these chapters, I adopt Habermas' (1972) notion of knowledge-constitutive interests, assessing the contrubutions to understanding organisational culture made by literature guided by technical, practical and emancipatory cognitive interests. In doing so, I suggest that more critical studies on organisational culture and symbolism have been comparatively neglected. Lamenting this neglect, I suggest that Giddens' theory of structuration can be employed to advance the development of a critical, emancipatory conceptualisation of organisational culture. In particular, I argue that this Giddensian analysis, by penetrating the existential, poltical and material processes of cultural reproduction (Chapter 5), is able to disclose some of the more contradictory features of organisation culture. The remainder of the thesis comprises of a critical ethnography of the work cultures of public relations and personnel specialists located in a state bureaucracy. I begin the ethnography with a dicussion of my research methods (Chapter 6) and an overview of the departments studied (Chapter 7): I then examine (i) the work cultures of the specialists (Chapter 8), (ii) the specialists' management of the relationships with the hosts bureaucracy (Chapter 9); and, (iii) opportunities the specialists had for developing an emancipatory praxis (Chapter 10). Finally, in a concluding section, I offer some critical reflections on the contributions of the thesis and suggest areas for future research.

An investigation of managerial skills:Implications for personnel policy

This research explores the conceptual basis in adopting a skills approach to management development. The literature reveals a number of development approaches but only a limited appreciation of how the manager does his job i.e. of the skills that he needs. An investigation of managerial skills was conducted with 10 manager s mainly occupying middle and senior positions. The principal source of evidence was the manager's thoughts on what he did and how he did it, although the interviews were supplemented by formal and informal observation. There was also a dialectic value from discussions with other analysts/managers and empathy between analyst and practitioner also played a part. Each manager was invited to comment upon his own skills analysis as a check upon validity. The study supports the view that the manager similar to other skilled practitioners, is conceptually a model builder and operationally a navigator (Singleton 1978b) . The manager variously holds enactive, pictorial, symbolic and hybrid models that enable him to understand his world and act in it. The universal managerial function is decision making and the study presents a preliminary nomenclature in classifying decision processes or perceptual skills. Managerial skills are also reflected in interpersonal interaction where the hallmark is mutual construction and attribution and in 'self-management’ where the requirement is to cope with the inner rather than the outer world. Differences between the managers are most evident in perceptual skills, the more senior manager requiring increasing ability to process abstract information and take account of environmental uncertainty. He will also make greater use of 'off- line’ information. The practical purpose in studying managerial skills is to facilitate the improvement of managerial performance and the implications of the research for training, selection and appraisal are explored.

Systematic financial resources allocation processes:a model for critical resources mobilization and deployment for nigerian universities

Purpose – The purpose of this research is to study the perceived impact of some factors on the resources allocation processes of the Nigerian universities and to suggest a framework that will help practitioners and academics to understand and improve such processes. Design/methodology/approach – The study adopted the interpretive qualitative approach aimed at an ‘in-depth’ understanding of the resource allocation experiences of key university personnel and their perceived impact of the contextual factors affecting such processes. The analysis of individual narratives from each university established the conditions and factors impacting the resources allocation processes within each institution. Findings – The resources allocation process issues in the Nigerian universities may be categorised into people (core and peripheral units’ challenge, and politics and power); process (resources allocation processes); and resources (critical financial shortage and resources dependence response). The study also provides insight that resourcing efficiency in Nigerian universities appears strongly constrained by the rivalry among the resource managers. The efficient resources allocation process (ERAP) model is proposed to resolve the identified resourcing deficiencies. Research limitations/implications – The research is not focused to provide generalizable observations but ‘in-depth’ perceived factors and their impact on the resources allocation processes in Nigerian universities. The study is limited to the internal resources allocation issues within the universities and excludes the external funding factors. The resource managers’ responses to the identified factors may affect their internal resourcing efficiency. Further research using more empirical samples is required to obtain more widespread results and the implications for all universities. Originality/value – This study contributes a fresh literature framework to resources allocation processes focusing at ‘people’, ‘process’ and ‘resources’. Also a middle range theory triangulation is developed in relation to better understanding of resourcing process management. The study will be of interest to university managers and policy makers.

Reliability modelling and verification of manufacturing processes based on process knowledge management

Reliability modelling and verification is indispensable in modern manufacturing, especially for product development risk reduction. Based on the discussion of the deficiencies of traditional reliability modelling methods for process reliability, a novel modelling method is presented herein that draws upon a knowledge network of process scenarios based on the analytic network process (ANP). An integration framework of manufacturing process reliability and product quality is presented together with a product development and reliability verification process. According to the roles of key characteristics (KCs) in manufacturing processes, KCs are organised into four clusters, that is, product KCs, material KCs, operation KCs and equipment KCs, which represent the process knowledge network of manufacturing processes. A mathematical model and algorithm is developed for calculating the reliability requirements of KCs with respect to different manufacturing process scenarios. A case study on valve-sleeve component manufacturing is provided as an application example of the new reliability modelling and verification procedure. This methodology is applied in the valve-sleeve component manufacturing processes to manage and deploy production resources.