Separate influences of acoustic AM and FM sensitivity on the phonological decoding skills of impaired and normal readers

Developmental dyslexia is associated with deficits in the processing of basic auditory stimuli. Yet it is unclear how these sensory impairments might contribute to poor reading skills. This study better characterizes the relationship between phonological decoding skills, the lack of which is generally accepted to comprise the core deficit in reading disabilities, and auditory sensitivity to amplitude modulation (AM) and frequency modulation (FM). Thirty-eight adult subjects, 17 of whom had a history of developmental dyslexia, completed a battery, of psychophysical measures of sensitivity to FM and AM at different modulation rates, along with a measure of pseudoword reading accuracy and standardized assessments of literacy and cognitive skills. The subjects with a history of dyslexia were significantly less sensitive than controls to 2-Hz FM and 20-Hz AM only. The absence of a significant group difference for 2-Hz AM shows that the dyslexics do not have a general deficit in detecting all slow modulations. Thresholds for detecting 2-Hz and 240-Hz FM and 20-Hz AM correlated significantly with pseudoword reading accuracy. After accounting for various cognitive skills, however, multiple regression analyses showed that detection thresholds for both 2-Hz FM and 20-Hz AM were significant and independent predictors of pseudoword reading ability in the entire sample. Thresholds for 2-Hz AM and 240-Hz FM did not explain significant additional variance in pseudoword reading skill, it is therefore possible that certain components of auditory processing of modulations are related to phonological decoding skills, whereas others are not.

Tale of two studies:challenges in field research with low-literacy adult learners in a developed country

Efforts to address the problems of literacy are often focused on developing countries. However, functional illiteracy is a challenge encountered by up to 50% of adults in developed countries. In this paper we reflect on the challenges we faced in trying to design and study the use of a mobile application to support adult literacy with two user groups: adults enrolled in literacy classes and carpenters without a high school education enrolled in an essential skills program. We also elaborate on aspects of the evaluations that are specific to a marginalized, functionally illiterate, group in a developed country - aspects that are less frequently present in similar studies of mobile literacy support technologies in developing countries. We conclude with presenting the lessons learnt from our evaluations and the impact of the studies' specific challenges on the outcome and uptake of such mobile assistive technologies in providing practical support to low-literacy adults in conjunction with literacy and essential skills training.

Mechanical properties and the evolution of matrix molecules in PTFE upon irradiation with MeV alpha particles

The morphology, chemical composition, and mechanical properties in the surface region of α-irradiated polytetrafluoroethylene (PTFE) have been examined and compared to unirradiated specimens. Samples were irradiated with 5.5 MeV 4He2+ ions from a tandem accelerator to doses between 1 × 106 and 5 × 1010 Rad. Static time-of-flight secondary ion mass spectrometry (ToF-SIMS), using a 20 keV C60+ source, was employed to probe chemical changes as a function of a dose. Chemical images and high resolution spectra were collected and analyzed to reveal the effects of a particle radiation on the chemical structure. Residual gas analysis (RGA) was utilized to monitor the evolution of volatile species during vacuum irradiation of the samples. Scanning electron microscopy (SEM) was used to observe the morphological variation of samples with increasing a particle dose, and nanoindentation was engaged to determine the hardness and elastic modulus as a function of a dose. The data show that PTFE nominally retains its innate chemical structure and morphology at a doses <109 Rad. At α doses ≥109 Rad the polymer matrix experiences increased chemical degradation and morphological roughening which are accompanied by increased hardness and declining elasticity. At  α doses >1010 Rad the polymer matrix suffers severe chemical degradation and material loss. Chemical degradation is observed in ToF-SIMS by detection of ions that are indicative of fragmentation, unsaturation, and functionalization of molecules in the PTFE matrix. The mass spectra also expose the subtle trends of crosslinking within the α-irradiated polymer matrix. ToF-SIMS images support the assertion that chemical degradation is the result of a particle irradiation and show morphological roughening of the sample with increased a dose. High resolution SEM images more clearly illustrate the morphological roughening and the mass loss that accompanies high doses of a particles. RGA confirms the supposition that the outcome of chemical degradation in the PTFE matrix with continuing irradiation is evolution of volatile species resulting in morphological roughening and mass loss. Finally, we reveal and discuss relationships between chemical structure and mechanical properties such as hardness and elastic modulus.

Partnering with governments and other institutions:driving change in diabetes care

The human and material cost of type 2 diabetes is a cause of increasing concern for health professionals, representative organisations and governments worldwide. The scale of morbidity and mortality has led the United Nations to issue a resolution on diabetes, calling for national policies for prevention, treatment and care. There is clearly an urgent need for a concerted response from all interested parties at the community, national and international level to work towards the goals of the resolution and create effective, sustainable treatment models, care systems and prevention strategies. Action requires both a 'bottom-up' approach of public awareness campaigns and pressure from healthcare professionals, coupled with a 'top-down' drive for change, via partnerships with governments, third sector (non-governmental) organisations and other institutions. In this review, we examine how existing collaborative initiatives serve as examples for those seeking to implement change in health policy and practice in the quest to alleviate the health and economic burden of diabetes. Efforts are underway to provide continuous and comprehensive care models for those who already have type 2 diabetes; in some cases, national plans extend to prevention strategies in attempts to improve overall public health. In the spirit of partnership, collaborations with governments that incorporate sustainability, long-term goals and a holistic approach continue to be a driving force for change. It is now critical to maintain this momentum and use the growing body of compelling evidence to educate, inform and deliver a long-term, lasting impact on patient and public health worldwide. © 2007 The Authors.

Functionalised particles using dry powder coating in pharmaceutical drug delivery:promises and challenges

Introduction: Production of functionalised particles using dry powder coating is a one-step, environmentally friendly process that paves the way for the development of particles with targeted properties and diverse functionalities. Areas covered: Applying the first principles in physical science for powders, fine guest particles can be homogeneously dispersed over the surface of larger host particles to develop functionalised particles. Multiple functionalities can be modified including: flowability, dispersibility, fluidisation, homogeneity, content uniformity and dissolution profile. The current publication seeks to understand the fundamental underpinning principles and science governing dry coating process, evaluate key technologies developed to produce functionalised particles along with outlining their advantages, limitations and applications and discusses in detail the resultant functionalities and their applications. Expert opinion: Dry particle coating is a promising solvent-free manufacturing technology to produce particles with targeted functionalities. Progress within this area requires the development of continuous processing devices that can overcome challenges encountered with current technologies such as heat generation and particle attrition. Growth within this field requires extensive research to further understand the impact of process design and material properties on resultant functionalities.

Structural design of contact lens-based drug delivery systems; in vitro and in vivo studies of ocular triggering mechanisms

This study identifies and investigates the potential use of in-eye trigger mechanisms to supplement the widely available information on release of ophthalmic drugs from contact lenses under passive release conditions. Ophthalmic dyes and surrogates have been successfully employed to investigate how these factors can be drawn together to make a successful system. The storage of a drug-containing lens in a pH lower than that of the ocular environment can be used to establish an equilibrium that favours retention of the drug in the lens prior to ocular insertion. Although release under passive conditions does not result in complete dye elution, the use of mechanical agitation techniques which mimic the eyelid blink action in conjunction with ocular tear chemistry promotes further release. In this way differentiation between passive and triggered in vitro release characteristics can be established. Investigation of the role of individual tear proteins revealed significant differences in their ability to alter the equilibrium between matrix-held and eluate-held dye or drug. These individual experiments were then investigated in vivo using ophthalmic dyes. Complete elution was found to be achievable in-eye; this demonstrated the importance of that fraction of the drug retained under passive conditions and the triggering effect of in-eye conditions on the release process. Understanding both the structure-property relationship between drug and material and in-eye trigger mechanisms, using ophthalmic dyes as a surrogate, provides the basis of knowledge necessary to design ocular drug delivery vehicles for in-eye release in a controllable manner.