Student response to a pub quiz style first year psychology assessment

The deterioration in staff-student ratios in UK higher education has had a disproportionate impact on assessment and feedback, meaning that contemporary students may have fewer assessments and much less feedback than a generation ago (Gibbs, 2006). Early use of a quiz assessment may offer a blend of social benefits (social comparison, shared problem solving leading to engagement, belonging and continuation), academic benefits (early formative assessment, immediate feedback) and administrative benefits (on-the-spot verbal marking and feedback to 230 students simultaneously). This study sought student views on the acceptability and contribution to learning of the quiz. Social benefits were apparent but difficulties in creating questions to elicit deeper reasoning and problem solving are discussed and the quiz had limited pedagogic value in the eyes of participants. The use of assertion-reason questions are considered as a way of taking the table quiz to a higher level and extending its pedagogic value.

Using cognitive load theory to interpret student difficulties with a problem-based learning approach to engineering education:a case study

This article reports on an investigationwith first year undergraduate ProductDesign and Management students within a School of Engineering and Applied Science. The students at the time of this investigation had studied fundamental engineering science and mathematics for one semester. The students were given an open ended, ill-formed problem which involved designing a simple bridge to cross a river.They were given a talk on problemsolving and given a rubric to follow, if they chose to do so.They were not given any formulae or procedures needed in order to resolve the problem. In theory, they possessed the knowledge to ask the right questions in order tomake assumptions but, in practice, it turned out they were unable to link their a priori knowledge to resolve this problem. They were able to solve simple beam problems when given closed questions. The results show they were unable to visualize a simple bridge as an augmented beam problem and ask pertinent questions and hence formulate appropriate assumptions in order to offer resolutions.

Practical photovoltaic simulator with a cross tackling control strategy based on the first-hand duty cycle processing

This paper proposes a methodological scheme for the photovoltaic (PV) simulator design. With the advantages of a digital controller system, linear interpolation is proposed for precise fitting with higher computational efficiency. A novel control strategy that directly tackles two different duty cycles is proposed and implemented to achieve a full-range operation including short circuit (SC) and open circuit (OC) conditions. Systematic design procedures for both hardware and algorithm are explained, and a prototype is built. Experimental results confirm an accurate steady state performance under different load conditions, including SC and OC. This low power apparatus can be adopted for PV education and research with a limited budget.

University-led innovative and inspirational engineering education

The UK Government and large employers have recognised the skills gap between learners leaving the education system and the requirements of employers. The current system is seen to be failing significant numbers of learners and has been accused of schooling but not educating our young people. University-led technical colleges are one part of the solution being developed to provide outstanding engineering education. This paper focusses on the learning experience that the Aston University Engineering Academy, the first University-led University Technical College (UTC), has created for entrants to the Engineering Academy in September 2012, when it opens in brand new buildings next to the University. The overall aim is to produce technically literate young people that have business and enterprise skills as well as insight into the diverse range of opportunities in Engineering and Technical disciplines. The project has brought University staff and students together with employers and Academy staff to optimise the engineering education that they will receive. The innovative model presented has drawn on research from across the world in the implementation of this new type of school, as well as educational practices from the USA and the Scandinavian countries. The resulting curriculum is authentic and exciting and expands the University model of problem-based learning and placements into the secondary school environment. The benefits of this close partnership for University staff and students, the employers and the Academy staff are expanded on and the paper concludes with a prediction of progression routes from the Academy.

Making mole-hills out of mountains:Peer Mentoring in Engineering education - A case-study

Based on the emergent findings of a pilot study which examined the issues around introducing Peer Mentoring into an Engineering School, this paper, which is very much a 'work in progress', describes and discusses results from the first year of what will be a three year exploratory study. Focusing on three distinctive concepts integral to the student experience, Relationships, Variety and Synergy, the study follows an Action Research Design in that it aims to find a realistic and workable solution to issues of attrition within the Engineering School in which the Project and Study are set. Starting with the research question "Does Peer Mentoring improve engineering students' transition into university?"', the Pilot Project and Study will run for three years, each year building on the lessons of the previous year.

A matter of professionalism? Reflection and reflexivity in continuing engineering education and practice

The argument that this paper sets out to critique is that in order to promote professionalism in Engineering Education and Practice, graduate level engineering programmes need to introduce the concepts of reflection and reflexivity into the curriculum right from the onset. By focusing upon the delivery of a newly developed „Work Based‟ Master’s level programme in Professional Engineering, this paper provides an overview of the first part of an empirical study which sets out to investigate the challenges associated with embedding reflection and reflexivity into Engineering Education. The paper concludes by noting that whilst student engineers may struggle with the concepts of reflection and reflexivity, with support and encouragement such difficulties can be overcome. Moreover, by encouraging students to reflect upon their Professional Practice, the programme not only enables students to consider how they may apply what they have learnt to their Professional Practice, but also encourages them to think about how they can link their experiences as Professional Engineers to what and how they learn both whilst on the programme but also as lifelong learners.

Developing a robust self evaluation framework for active learning:the first stage of an ERASMUS+ project (QAEMarketPlace4HEI)

In ensuring the quality of learning and teaching in Higher Education, self-evaluation is an important component of the process. An example would be the approach taken within the CDIO community whereby self-evaluation against the CDIO standards is part of the quality assurance process. Eight European universities (Reykjavik University, Iceland; Turku University of Applied Sciences, Finland; Aarhus University, Denmark; Helsinki Metropolia University of Applied Sciences, Finland; Ume? University, Sweden; Telecom Bretagne, France; Aston University, United Kingdom; Queens University Belfast, United Kingdom) are engaged in an EU funded Erasmus + project that is exploring the quality assurance process associated with active learning. The development of a new self-evaluation framework that feeds into a ?Marketplace? where participating institutions can be paired up and then engage in peer evaluations and sharing around each institutions approach to and implementation of active learning. All of the partner institutions are engaged in the application of CDIO within their engineering programmes and this has provided a common starting point for the partnership to form and the project to be developed. Although the initial focus will be CDIO, the longer term aim is that the approach could be of value beyond CDIO and within other disciplines. The focus of this paper is the process by which the self-evaluation framework is being developed and the form of the draft framework. In today?s Higher Education environment, the need to comply with Quality Assurance standards is an ever present feature of programme development and review. When engaging in a project that spans several countries, the wealth of applicable standards and guidelines is significant. In working towards the development of a robust Self Evaluation Framework for this project, the project team decided to take a wide view of the available resources to ensure a full consideration of different requirements and practices. The approach to developing the framework considered: a) institutional standards and processes b) national standards and processes e.g. QAA in the UK c) documents relating to regional / global accreditation schemes e.g. ABET d) requirements / guidelines relating to particular learning and teaching frameworks e.g. CDIO. The resulting draft self-evaluation framework is to be implemented within the project team to start with to support the initial ?Marketplace? pairing process. Following this initial work, changes will be considered before a final version is made available as part of the project outputs. Particular consideration has been paid to the extent of the framework, as a key objective of the project is to ensure that the approach to quality assurance has impact but is not overly demanding in terms of time or paperwork. In other words that it is focused on action and value added to staff, students and the programmes being considered.

Inspiring young people to engage in engineering education:The Aston University Engineering Academy Birmingham

This paper initially reports concerns about the falling interest in engineering and mathematical disciplines and looks at some of the reasons for this. It then discusses the aims of the Engineering Diploma - a qualification for 14-19 year olds in the UK - and the pedagogical research that that has informed the design and development. The paper highlights the key learning theories that support the delivery of this qualification and provides an example of how this pedagogy has been applied effectively through the curriculum partnership that has been developed between a consortium of schools in the Birmingham local authority, Aston University and employers. It establishes the importance of aligning the curriculum and articulating clear engineering progression routes from the age of fourteen to enable young people to be inspired and motivated towards careers in engineering. The paper presents the view of parents, teachers and pupils involved with the Diploma, during the first year, and the way in which the partnership is informing future developments in the delivery of engineering curriculum within the region. The success of this regional partnership model has resulted in the Department of Children, Schools and Families agreeing to fund the development of the Aston University Engineering Academy Birmingham. This is a school for 14-19 year olds that will open in 2012 on the Aston Science Park adjacent to the University. The final part of the paper looks at the benefits to the young local engineers of this initiative. © 2009 Authors.

Laboratory focussed learning of core electronic engineering concepts in the first year of an honours degree programme

In common with most universities teaching electronic engineering in the UK, Aston University has seen a shift in the profile of its incoming students in recent years. The educational background of students has moved away from traditional Alevel maths and science and if anything this variation is set to increase with the introduction of engineering diplomas. Another major change to the circumstances of undergraduate students relates to the introduction of tuition fees in 1998 which has resulted in an increased likelihood of them working during term time. This may have resulted in students tending to concentrate on elements of the course that directly provide marks contributing to the degree classification. In the light of these factors a root and branch rethink of the electronic engineering degree programme structures at Aston was required. The factors taken into account during the course revision were:. Changes to the qualifications of incoming students. Changes to the background and experience of incoming students. Increase in overseas students, some with very limited practical experience. Student focus on work directly leading to marks. Modular compartmentalisation of knowledge. The need for provision of continuous feedback on performance We discuss these issues with specific reference to a 40 credit first year electronic engineering course and detail the new course structure and evaluate the effectiveness of the changes. The new approach appears to have been successful both educationally and with regards to student satisfaction. The first cohort of students from the new course will graduate in 2010 and results from student surveys relating particularly to project and design work will be presented at the conference. © 2009 K Sugden, D J Webb and R P Reeves.