New measures of job control, cognitive demand and production responsibility

Recent research has highlighted several job characteristics salient to employee well-being and behavior for which there are no adequate generally applicable measures. These include timing and method control, monitoring and problem-solving demand, and production responsibility. In this article, an attempt to develop measures of these constructs provided encouraging results. Confirmatory factor analyses applied to data from 2 samples of shop-floor employees showed a consistent fit to a common 5-factor measurement model. Scales corresponding to each of the dimensions showed satisfactory internal and test–retest reliabilities. As expected, the scales also discriminated between employees in different jobs and employees working with contrasting technologies.

Individual spirit at work and its outcomes:an empirical examination in corporate Thailand

The purpose of the present study was to conduct empirical research in corporate Thailand in order to (1) investigate the relationships between individual spirit at work and three employee work attitudinal variables (organisational identification, job satisfaction and psychological well-being) and three organisational outcomes (in-role performance, organisational citizenship behaviours (OCB), and turnover intentions) (2) further examine causal relations among these organisational behaviour variables with a longitudinal design (3) examine three employee work attitudes as mediator variables between individual spirit at work and three organisational outcomes and (4) explore the potential antecedents of organisational conditions that foster employee experienced individual spirit at work. The 715 completed questionnaires were received from the first wave of data collection during July 2008 and the second wave was conducted again within the same organisations and 501 completed questionnaires were received during April 2009. Data were obtained through 52 organisations which were from three types of organisations within Thailand: public organisations (N=237,185), for-profit organisations (N=244,155), and not-for-profit organisations (N=234,161). Confirmatory factor analysis of all measures used in the study and hypothesized model were tested with structural equation modeling techniques. Results were strongly supportive. In addition, although the model was invariant across rater of performance and OCB, there were differences across self report and supervisor rating. Additionally, the antecedents of organisational conditions that fostered employees experienced individual spirit at work and the implications of these findings for practice and research are discussed.

Lockwood v Department for Work and Pensions 2012

Case law report - online

Engaging with a world outside of ourselves:vistas of flatness, children's work and the urban informal economy

This paper considers the work and labour of children living on the streets of Accra, Ghana. It does so in two distinctive ways. First, it considers how the children's photographs of a day or two in their working lives, and the dialogues that go on in, through and around them, may contribute to the making of strong sociological arguments about children's work. In so doing, this paper elaborates the connections between visual sociology and realist traditions of photography, and argues that photographs can contribute distinctive and novel sources of insight into working children's lives and a powerful, humanising media of dissemination. Second, these arguments are then deployed to examine street children's experiences of work. Conceptualised in terms of its 'flatness', the paper explores the informal means of regulation through which the children are locked into types of working that prove difficult to escape. © Sociological Research Online, 1996-2012.

Exploring demand and production planning challenges in the food processing industry:a case study

This paper explores demand and production management challenges in the food processing industry. The goal is to identify the main production planning constraints and secondly to explore how each of these constraints affects company’s performance in terms of costs and customer service level. A single case study methodology was preferred since it enabled the collection of in-depth data. Findings suggest that product shelf life, carcass utilization and production lead time are the main constraints affecting supply chain efficiency and hence, a single planning approach is not appropriate when different products have different technological and processing characteristics.

Optimum design and production of two-storey timber framed housing

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Reconstructing institutional complexity in practice:a relational model of institutional work and complexity

This article develops a relational model of institutional work and complexity. This model advances current institutional debates on institutional complexity and institutional work in three ways. First, it provides a relational and dynamic perspective on institutional complexity by explaining how constellations of logics - and their degree of internal contradiction - are constructed rather than given. Second, it refines our current understanding of agency, intentionality and effort in institutional work by demonstrating how different dimensions of agency interact dynamically in the institutional work of reconstructing institutional complexity. Third, it situates institutional work in the everyday practice of individuals coping with the institutional complexities of their work. In doing so, it reconnects the construction of institutionally complex settings to the actions and interactions of the individuals who inhabit them. © The Author(s) 2013.

Introduction : the role of quality, production and technological innovation in improving competitive performance

Quality, production and technological innovation management rank among the most important matters of concern to modern manufacturing organisations. They can provide companies with the decisive means of gaining a competitive advantage, especially within industries where there is an increasing similarity in product design and manufacturing processes. The papers in this special issue of International Journal of Technology Management have all been selected as examples of how aspects of quality, production and technological innovation can help to improve competitive performance. Most are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the theme was 'Getting Ahead Through Technology and People'. At the conference itself over 80 papers were presented by authors from 15 countries around the world. Among the many topics addressed within the conference theme, technological innovation, quality and production management emerged as attracting the greatest concern and interest of delegates, particularly those from industry. For any new initiative to be implemented successfully, it should be led from the top of the organization. Achieving the desired level of commitment from top management can, however, be a difficulty. In the first paper of this issue, Mackness investigates this question by explaining how systems thinking can help. In the systems approach, properties such as 'emergence', 'hierarchy', 'commnication' and 'control' are used to assist top managers in preparing for change. Mackness's paper is then complemented by Iijima and Hasegawa's contribution in which they investigate the development of Quality Information Management (QIM) in Japan. They present the idea of a Design Review and demonstrate how it can be used to trace and reduce quality-related losses. The next paper on the subject of quality is by Whittle and colleagues. It relates to total quality and the process of culture change within organisations. Using the findings of investigations carried out in a number of case study companies, they describe four generic models which have been identified as characterising methods of implementing total quality within existing organisation cultures. Boaden and Dale's paper also relates to the management of quality, but looks specifically at the construction industry where it has been found there is still some confusion over the role of Quality Assurance (QA) and Total Quality Management (TQM). They describe the results of a questionnaire survey of forty companies in the industry and compare them to similar work carried out in other industries. Szakonyi's contribution then completes this group of papers which all relate specifically to the question of quality. His concern is with the two ways in which R&D or engineering managers can work on improving quality. The first is by improving it in the laboratory, while the second is by working with other functions to improve quality in the company. The next group of papers in this issue all address aspects of production management. Umeda's paper proposes a new manufacturing-oriented simulation package for production management which provides important information for both design and operation of manufacturing systems. A simulation for production strategy in a Computer Integrated Manufacturing (CIM) environment is also discussed. This paper is then followed by a contribution by Tanaka and colleagues in which they consider loading schedules for manufacturing orders in a Material Requirements Planning (MRP) environment. They compare mathematical programming with a knowledge-based approach, and comment on their relative effectiveness for different practical situations. Engstrom and Medbo's paper then looks at a particular aspect of production system design, namely the question of devising group working arrangements for assembly with new product structures. Using the case of a Swedish vehicle assembly plant where long cycle assembly work has been adopted, they advocate the use of a generally applicable product structure which can be adapted to suit individual local conditions. In the last paper of this particular group, Tay considers how automation has affected the production efficiency in Singapore. Using data from ten major industries he identifies several factors which are positively correlated with efficiency, with capital intensity being of greatest interest to policy makers. The two following papers examine the case of electronic data interchange (EDI) as a means of improving the efficiency and quality of trading relationships. Banerjee and Banerjee consider a particular approach to material provisioning for production systems using orderless inventory replenishment. Using the example of a single supplier and multiple buyers they develop an analytical model which is applicable for the exchange of information between trading partners using EDI. They conclude that EDI-based inventory control can be attractive from economic as well as other standpoints and that the approach is consistent with and can be instrumental in moving towards just-in-time (JIT) inventory management. Slacker's complementary viewpoint on EDI is from the perspective of the quality relation-ship between the customer and supplier. Based on the experience of Lucas, a supplier within the automotive industry, he concludes that both banks and trading companies must take responsibility for the development of payment mechanisms which satisfy the requirements of quality trading. The three final papers of this issue relate to technological innovation and are all country based. Berman and Khalil report on a survey of US technological effectiveness in the global economy. The importance of education is supported in their conclusions, although it remains unclear to what extent the US government can play a wider role in promoting technological innovation and new industries. The role of technology in national development is taken up by Martinsons and Valdemars who examine the case of the former Soviet Union. The failure to successfully infuse technology into Soviet enterprises is seen as a factor in that country's demise, and it is anticipated that the newly liberalised economies will be able to encourage greater technological creativity. This point is then taken up in Perminov's concluding paper which looks in detail at Russia. Here a similar analysis is made of the concluding paper which looks in detail at Russia. Here a similar analysis is made of the Soviet Union's technological decline, but a development strategy is also presented within the context of the change from a centralised to a free market economy. The papers included in this special issue of the International Journal of Technology Management each represent a unique and particular contribution to their own specific area of concern. Together, however, they also argue or demonstrate the general improvements in competitive performance that can be achieved through the application of modern principles and practice to the management of quality, production and technological innovation.

Production and operations managers and logistics managers: a cross-country comparison

Purpose – The purpose of this paper is to explore the contribution of production and operations managers (POMs) and logistics managers (LMs) in improving manufacturing and service operations, comparing experiences in Australia and Britain. Design/methodology/approach – The findings are based on surveys of the two occupations in the two countries. Thus, the focus is on comparing and contrasting two strategically placed occupations within the supply chain and in two traditional manufacturing economies in developed countries, in opposing hemispheres of the world. Findings – The working lives of 254 Australian and 195 British POMs and 303 Australian and 168 British LMs are explored to see how well prepared they are for the business challenges of today, whether they see the need for changes in the ways in which they work and what satisfactions they derive from their worlds of work? Practical implications – Insights are provided for senior management into the deployment and personal and professional development needs of two key occupations within supply chain management. Originality/value – The findings from the research give fresh insights into the ways in which managers in the two areas of responsibilities in the two countries.view their worlds of work.

When promoting positive feelings pays:Aggregate job satisfaction, work design features, and innovation in manufacturing organizations

This study investigates the relationship between aggregate job satisfaction and organizational innovation. In a sample of manufacturing companies, data were gathered from 3717 employees in 28 UK manufacturing organizations about their job satisfaction and aggregated to the organizational level. Data on innovation in technology/processes were gathered from multiple respondents in the same organizations 24 months later. The results revealed that aggregate job satisfaction was a significant predictor of subsequent organizational innovation, even after controlling for prior organizational innovation and profitability. Moreover the data indicated that the relationship between aggregate job satisfaction and innovation in production technology/processes was moderated by two factors: job variety and a commitment to "single status". Unlike previous studies, we conceptualize job satisfaction at the aggregate rather than the individual level and examine innovation rather than creativity. We propose that where the majority of employees experience job satisfaction, they will endorse rather than resist innovation and work collaboratively to implement as well as to generate creative ideas.