The role of experts in policy making

As public policy issues increasingly have a technical aspect to them an interactive relationship has developed between science and policy. The aim of this thesis is to investigate the two aspects of this relationship: the influence of science on policy and the influence of policy implications on science. Most existing studies in this area treat only one or other of these aspects. Furthermore, they tend to provide interesting case study material but very little theoretical analysis. This thesis attempts to overcome these problems by dealing with both aspects of the interaction between science and policy and by providing theoretical models of this relationship. The thesis combines the theoretical development of these models with the analysis of three empirical case studies: the controversy in Britain over smoking and health; the application of educational psychology to the development of education policy in Britain; the controversy over the health effect of lead in the environment. The theoretical models are developed in Part 1. In Part 2 the empirical case studies are presented and in Part 3 the theoretical material is assessed in the light of these case studies. The main thesis of this study is that there is a fundamental mismatch between science and policy-making. Criticism is always essential in science. However, when science is involved in the policy process, either scientific claims are not subjected to a significant level of criticism or they are scrutinized so closely that no view achieves general consensus and conflicting advice results. In this situation, contrary to the traditional view, science can generate uncertainty. The role which science plays in the policy process is influenced by this level of criticism, by the context of political power and by the progress of an issue through the various stages of the policy process.

The application of fibre Bragg grating networks as strain sensors and as phased array antenna true time delay elements

The fabrication of in-fibre Bragg gratings, and the application of arrays of such gratings as strain sensors and as true time delay elements for the control of phased array antennas is reported. Chirped period Bragg gratings were produced using the fibre deformation fabrication technique, with chirps of between 2.9nm and 17.3nm achieved. Arrays of 5mm and 2mm long uniform period Bragg gratings were fabricated using the inscription method, for use as true time delay elements,dissimilar wavefronts and their spectral characteristics recorded. The uniform period grating arrays were used to create minimum time delays of 9.09ps, 19.02ps and 31ps; making them suitable for controlling phased array antennas operating at RF frequencies of up to 3GHz, with 10° phase resolution. Four 4mm long chirped gratings were produced using the dissimilar wavefronts fabrication method, having chirps of 7nm, 12nm, 20nm and 30nm, and were used to create time delays of between 0.3ps and 59ps. Hence they are suitable for controlling phased array antennas at RF frequencies of up to 48GHz. The application of in fibre Bragg gratings as strain sensors within smart structure materials was investigated, with their sensitivity to applied strain and compression measured for both embedded and surface mounted uniform period and fibre Fabry-Perot filter gratings. A fibre Bragg grating sensor demultiplexing scheme based on a liquid crystal filled Fabry-Perot etalon tuneable transmission filter was proposed, successfully constructed and fully characterised. Three characteristics of the LCFP etalon were found to pose operational limitations to its application in a Bragg grating sensor system; most significantly, the resonance peak wavelength was highly (-2,77nm/°C) temperature dependent. Several methods for minimising this temperature sensitivity were investigated, but enjoyed only limited success. It was therefore concluded that this type (E7 filled) of LCFP etalon is unsuitable for use as a Bragg grating sensor demultiplexing element.

A method for systematic artifact selection decision making

Artifact selection decisions typically involve the selection of one from a number of possible/candidate options (decision alternatives). In order to support such decisions, it is important to identify and recognize relevant key issues of problem solving and decision making (Albers, 1996; Harris, 1998a, 1998b; Jacobs & Holten, 1995; Loch & Conger, 1996; Rumble, 1991; Sauter, 1999; Simon, 1986). Sauter classifies four problem solving/decision making styles: (1) left-brain style, (2) right-brain style, (3) accommodating, and (4) integrated (Sauter, 1999). The left-brain style employs analytical and quantitative techniques and relies on rational and logical reasoning. In an effort to achieve predictability and minimize uncertainty, problems are explicitly defined, solution methods are determined, orderly information searches are conducted, and analysis is increasingly refined. Left-brain style decision making works best when it is possible to predict/control, measure, and quantify all relevant variables, and when information is complete. In direct contrast, right-brain style decision making is based on intuitive techniques—it places more emphasis on feelings than facts. Accommodating decision makers use their non-dominant style when they realize that it will work best in a given situation. Lastly, integrated style decision makers are able to combine the left- and right-brain styles—they use analytical processes to filter information and intuition to contend with uncertainty and complexity.

Supporting decision-making for self-adaptive systems:from goal models to dynamic decision networks

Context/Motivation - Different modeling techniques have been used to model requirements and decision-making of self-adaptive systems (SASs). Specifically, goal models have been prolific in supporting decision-making depending on partial and total fulfilment of functional (goals) and non-functional requirements (softgoals). Different goalrealization strategies can have different effects on softgoals which are specified with weighted contribution-links. The final decision about what strategy to use is based, among other reasons, on a utility function that takes into account the weighted sum of the different effects on softgoals. Questions/Problems - One of the main challenges about decisionmaking in self-adaptive systems is to deal with uncertainty during runtime. New techniques are needed to systematically revise the current model when empirical evidence becomes available from the deployment. Principal ideas/results - In this paper we enrich the decision-making supported by goal models by using Dynamic Decision Networks (DDNs). Goal realization strategies and their impact on softgoals have a correspondence with decision alternatives and conditional probabilities and expected utilities in the DDNs respectively. Our novel approach allows the specification of preferences over the softgoals and supports reasoning about partial satisfaction of softgoals using probabilities. We report results of the application of the approach on two different cases. Our early results suggest the decision-making process of SASs can be improved by using DDNs. © 2013 Springer-Verlag.

Opportunity, fair process and relationship value:career development as a driver of proactive work behaviour

In line with recent findings from organisational justice theory, we hypothesised that employee proactive behaviour and careerist orientation is predicted by the interplay of perceived favourability of career development opportunities, the perceived fairness of the procedures used to decide them, and employee organisational commitment. Employees (N = 325) of a large financial services organisation responded to a self-completion questionnaire. As predicted, when career development opportunities were viewed unfavourably, perceived procedural justice was significantly and positively related to individual proactive behaviour and significantly and negatively related to careerist orientation but only when organisational commitment was high. It appears that high procedural justice may only 'offset' the negative effects of unfavourable career development opportunities when employees identify with, and are committed to, their organisation. Further support is presented for a relational, rather than instrumental, model of procedural justice when reflecting on employee reactions to their employers' policies and decision-making. Implications for theory and practice are discussed.

Philosophy, theory, and practice of green operations management

This paper proposes a more profound discussion of the philosophical underpins of sustainability than currently exists in the MOT literature and considers their influence on the construction of the theories on green operations and technology management. Ultimately, it also debates the link between theory and practice on this subject area. The paper is derived from insights gained in three research projects completed during the past twelve years, primarily involving the first author. From 2000 to 2002, an investigation using scenario analysis, aimed at reducing atmospheric pollution in urban centres by substituting natural gas for petrol and diesel, provided the first set of insights about public policy, environmental impacts, investment analysis, and technological feasibility. The second research project, from 2003 to 2005, using a survey questionnaire, was aimed at improving environmental performance in livestock farming and explored the issues of green supply chain scope, environmental strategy and priorities. Finally, the third project, from 2006 to 2011, investigated environmental decisions in manufacturing organisations through case study research and examined the underlying sustainability drivers and decision-making processes. By integrating the findings and conclusions from these projects, the link between philosophy, theory, and practice of green operations and technology management is debated. The findings from all these studies show that the philosophical debate seems to have little influence on theory building so far. For instance, although ‘sustainable development’ emphasises ‘meeting the needs of current and future generation’, no theory links essentiality and environmental impacts. Likewise, there is a weak link between theory and the practical issues of green operations and technology management. For example, the well-known ‘life-cycle analysis’ has little application in many cases because the life cycle of products these days is dispersed within global production and consumption systems and there are different stakeholders for each life cycle stage. The results from this paper are relevant to public policy making and corporate environmental strategy and decision making. Most of the past and current studies in the subject of green operations and sustainability management deal with only a single sustainability dimension at any one time. Here the value and originality of this paper lies in its integration between philosophy, theory, and practice of green technology and operations management.

Understanding manufacturing companies' environmental decision making structures

This paper provides an understanding of the current environmental decision structures within companies in the manufacturing sector. Through case study research, we explored the complexity, robustness and decision making processes companies were using in order to cope with ever increasing environmental pressures and choice of environmental technologies. Our research included organisations in UK, Thailand, and Germany. Our research strategy was case study composed of different research methods, namely: focus group, interviews and environmental report analysis. The research methods and their data collection instruments also varied according to the access we had. Our unity of analysis was decision making teams and the scope of our investigation included product development, environment & safety, manufacturing, and supply chain management. This study finds that environmental decision making have been gaining importance over the time as well as complexity when it is starting to move from manufacturing to non,manufacturing activities. Most companies do not have a formal structure to take environmental decisions; hence, they follow a similar path of other corporate decisions, being affected by organizational structures besides the technical competence of the teams. We believe our results will help improving structures in both beginners and leaders teams for environmental decision making across the different departments.

Quality management and performance:a comparison between the UK and Turkey

Purpose: The aim of this article is to detail the correlation between quality management, specifically its tools and critical success factors, and performance in terms of primary operational and secondary organisational performances. Design/methodology/approach: Survey data from the UK and Turkey were analysed using exploratory factor analyses, structural equation modelling and regression analysis. Findings: The results show that quality management has a significant and positive impact on both primary and secondary performances; that Turkish and UK attitudes to quality management are similar; and that quality management is widely practised in manufacturing and service industries but has more statistical emphasis in the manufacturing sector. The main challenge for making quality management practice more effective lies in an appropriate balanced use of the different sorts of the tools and critical success factors. Originality/value: This study takes a novel approach by: (i) exploring the relationship between primary operational and secondary organisational performances, (ii) using service and manufacturing data and (iii) making a cross-country comparison between the UK (a developed economy) and Turkey (a developing economy). Limitations: Detailed contrast provided between only two countries. © 2013 Copyright Taylor and Francis Group, LLC.

Cognitive systems associated with the hippocampus of the human brain and their role in behaviour and neurodegenerative disease

Cognitive systems research involves the synthesis of ideas from natural and artificial systems in the analysis, understanding, and design of all intelligent systems. This chapter discusses the cognitive systems associated with the hippocampus (HC) of the human brain and their possible role in behaviour and neurodegenerative disease. The hippocampus (HC) is concerned with the analysis of highly abstract data derived from all sensory systems but its specific role remains controversial. Hence, there have been three major theories concerning its function, viz., the memory theory, the spatial theory, and the behavioral inhibition theory. The memory theory has its origin in the surgical destruction of the HC, which results in severe anterograde and partial retrograde amnesia. The spatial theory has its origin in the observation that neurons in the HC of animals show activity related to their location within the environment. By contrast, the behavioral inhibition theory suggests that the HC acts as a ‘comparator’, i.e., it compares current sensory events with expected or predicted events. If a set of expectations continues to be verified then no alteration of behavior occurs. If, however, a ‘mismatch’ is detected then the HC intervenes by initiating appropriate action by active inhibition of current motor programs and initiation of new data gathering. Understanding the cognitive systems of the hippocampus in humans may aid in the design of intelligent systems involved in spatial mapping, memory, and decision making. In addition, this information may lead to a greater understanding of the course of clinical dementia in the various neurodegenerative diseases in which there is significant damage to the HC.

A method for systematic artifact selection decision making

Artifact selection decisions typically involve the selection of one from a number of possible/candidate options (decision alternatives). In order to support such decisions, it is important to identify and recognize relevant key issues of problem solving and decision making (Albers, 1996; Harris, 1998a, 1998b; Jacobs & Holten, 1995; Loch & Conger, 1996; Rumble, 1991; Sauter, 1999; Simon, 1986). Sauter classifies four problem solving/decision making styles: (1) left-brain style, (2) right-brain style, (3) accommodating, and (4) integrated (Sauter, 1999). The left-brain style employs analytical and quantitative techniques and relies on rational and logical reasoning. In an effort to achieve predictability and minimize uncertainty, problems are explicitly defined, solution methods are determined, orderly information searches are conducted, and analysis is increasingly refined. Left-brain style decision making works best when it is possible to predict/control, measure, and quantify all relevant variables, and when information is complete. In direct contrast, right-brain style decision making is based on intuitive techniques—it places more emphasis on feelings than facts. Accommodating decision makers use their non-dominant style when they realize that it will work best in a given situation. Lastly, integrated style decision makers are able to combine the left- and right-brain styles—they use analytical processes to filter information and intuition to contend with uncertainty and complexity.

Outsourcing:assessing the risks and benefits for organisations, sectors and nations

Purpose - This research aims to assess the risks and benefits of outsourcing for organisations, sectors and nations. The literature on outsourcing contains little evidence of research on holistic issues of its impact at systems levels beyond the firm, notably sectors and nations. Design/methodology/approach - A Delphi study with senior strategists from private and public sectors captured perspectives and specific observations on benefits and risks of outsourcing. Emergent issues on outsourcing policy, strategy and decision-making processes were synthesised into a framework for analysing factors associated with outsourcing. Findings - The findings suggest that a more holistic view of outsourcing is needed, linking local, organisational issues with sector and national level actions and outcomes. In this way, aggregate risks and benefits can be assessed at different systems levels. Research limitations/implications - Future research might address the motivations for outsourcing; currently there is little research evidence to assess whether outsourcing is a mechanism for failing to solve internal problems, and moving responsibility and risk out of the firm. Additionally most outsourcing research to date has concentrated on an activity either being "in" or "out"; there is little research exploring the circumstances in which mixed models might be appropriate. Practical implications - The framework provides an aid to research and an aide memoire for managers considering outsourcing. Originality/value - This paper contributes to knowledge on understanding of outsourcing at different systems levels, particularly highlighting the implications of outsourcing for sectors and nations. Previously most research has focused at the level of the firm or dyadic relationship. © Emerald Group Publishing Limited.

Extreme weather events and construction SMEs:vulnerability, impacts and responses

Purpose – The UK experienced a number of Extreme Weather Events (EWEs) during recent years and a significant number of businesses were affected as a result. With the intensity and frequency of weather extremes predicted in the future, enhancing the resilience of businesses, especially of Small and Medium-sized Enterprises (SMEs), who are considered as highly vulnerable, has become a necessity. However, little research has been undertaken on how construction SMEs respond to the risk of EWEs. In seeking to help address this dearth of research, this investigation sought to identify how construction SMEs were being affected by EWEs and the coping strategies being used. Design/methodology/approach – A mixed methods research design was adopted to elicit information from construction SMEs, involving a questionnaire survey and case study approach. Findings – Results indicate a lack of coping strategies among the construction SMEs studied. Where the coping strategies have been implemented, these were found to be extensions of their existing risk management strategies rather than radical measures specifically addressing EWEs. Research limitations/implications – The exploratory survey focused on the Greater London area and was limited to a relatively small sample size. This limitation is overcome by conducting detailed case studies utilising two SMEs whose projects were located in EWE prone localities. The mixed method research design adopted benefits the research by presenting more robust findings. Practical implications – A better way of integrating the potential of EWEs into the initial project planning stage is required by the SMEs. This could possibly be achieved through a better risk assessment model supported by better EWE prediction data. Originality/value – The paper provides an original contribution towards the overarching agenda of resilience of SMEs and policy making in the area of EWE risk management. It informs both policy makers and practitioners on issues of planning and preparedness against EWEs.

Impacts of flooding on SMEs and their relevance to chartered surveyors:

This is the final report of the RICS Education Trust funded “Developing Flood Expert Knowledge in Chartered Surveyors – DEFENCES” research project. The UK has endured a number of major flood events in recent years, and the UK Environment Agency (2009a) identified that about 5.2million properties in England, amounting to one in six, are at risk of flooding. The impacts of flooding include direct and indirect impacts and can be particularly devastating for small and medium-sized enterprises (SMEs) who are generally more vulnerable to such events than larger business organisations. Recent flood events have established how costly flooding can be to the SME sector (Pitt, 2008, ABI, 2010), which has given greater impetus to the need to improve the resilience of at-risk SMEs. A lack of professional advice on flood protection and adaptation measures represents a potential barrier to the uptake of such interventions by SMEs. A recent Royal Institution of Chartered Surveyors (RICS) survey, as quoted in Defra (2008) notes that, although a majority of chartered surveyors would like to work in this area of practice (flood risk assessment and adaptation), they are conscious of gaps in their competency, knowledge and understanding. The research project sought to contextualise this broader issue and investigate how chartered surveyors can bridge the gap in providing professional flood advice to SMEs. Further, a shift in the UK government policy on flood risk management is evident, where at-risk communities are urged to adapt to flooding. This places greater emphasis on property-level flood adaptation, providing further impetus for Chartered Surveyors to be involved. Findings of the research will be of interest to the RICS, the RICS Flood steering Group, practicing surveyors generally, SMEs, business support and policy making organisations.

Multimodal field data entry:performance and usability issues

Mobile technologies have yet to be widely adopted by the Architectural, Engineering, and Construction (AEC) industry despite being one of the major growth areas in computing in recent years. This lack of uptake in the AEC industry is likely due, in large part, to the combination of small screen size and inappropriate interaction demands of current mobile technologies. This paper discusses the scope for multimodal interaction design with a specific focus on speech-based interaction to enhance the suitability of mobile technology use within the AEC industry by broadening the field data input capabilities of such technologies. To investigate the appropriateness of using multimodal technology for field data collection in the AEC industry, we have developed a prototype Multimodal Field Data Entry (MFDE) application. This application, which allows concrete testing technicians to record quality control data in the field, has been designed to support two different modalities of data input speech-based data entry and stylus-based data entry. To compare the effectiveness or usability of, and user preference for, the different input options, we have designed a comprehensive lab-based evaluation of the application. To appropriately reflect the anticipated context of use within the study design, careful consideration had to be given to the key elements of a construction site that would potentially influence a test technician's ability to use the input techniques. These considerations and the resultant evaluation design are discussed in detail in this paper.

Exploration of metaphors used by Indonesian legislators and political elites in the Indonesian sociopolitical domain

This thesis examines the ways Indonesian politicians exploit the rhetorical power of metaphors in the Indonesian political discourse. The research applies the Conceptual Metaphor Theory, Metaphorical Frame Analysis and Critical Discourse Analysis to textual and oral data. The corpus comprises: 150 political news articles from two newspapers (Harian Kompas and Harian Waspada, 2010-2011 edition), 30 recordings of two television news and talk-show programmes (TV-One and Metro-TV), and 20 interviews with four legislators, two educated persons and two laymen. For this study, a corpus of written bahasa Indonesia was also compiled, which comprises 150 texts of approximately 439,472 tokens. The data analysis shows the potential power of metaphors in relation to how politicians communicate the results of their thinking, reasoning and meaning-making through language and discourse and its social consequences. The data analysis firstly revealed 1155 metaphors. These metaphors were then classified into the categories of conventional metaphor, cognitive function of metaphor, metaphorical mapping and metaphor variation. The degree of conventionality of metaphors is established based on the sum of expressions in each group of metaphors. Secondly, the analysis revealed that metaphor variation is influenced by the broader Indonesian cultural context and the natural and physical environment, such as the social dimension, the regional, style and the individual. The mapping system of metaphor is unidirectionality. Thirdly, the data show that metaphoric thought pervades political discourse in relation to its uses as: (1) a felicitous tool for the rhetoric of political leaders, (2) part of meaning-making that keeps the discourse contexts alive and active, and (3) the degree to which metaphor and discourse shape the conceptual structures of politicians‟ rhetoric. Fourthly, the analysis of data revealed that the Indonesian political discourse attempts to create both distance and solidarity towards general and specific social categories accomplished via metaphorical and frame references to the conceptualisations of us/them. The result of the analysis shows that metaphor and frame are excellent indicators of the us/them categories which work dialectically in the discourse. The acts of categorisation via metaphors and frames at both textual and conceptual level activate asymmetrical concepts and contribute to social and political hierarchical constructs, i.e. WEAKNESS vs.POWER, STUDENT vs. TEACHER, GHOST vs. CHOSEN WARRIOR, and so on. This analysis underscores the dynamic nature of categories by documenting metaphorical transfers between, i.e. ENEMY, DISEASE, BUSINESS, MYSTERIOUS OBJECT and CORRUPTION, LAW, POLITICS and CASE. The metaphorical transfers showed that politicians try to dictate how they categorise each other in order to mobilise audiences to act on behalf of their ideologies and to create distance and solidarity.