Patterns of phonological errors as a function of a phonological versus an articulatory locus of impairment

WWe present the case of two aphasic patients: one with fluent speech, MM, and one with dysfluent speech, DB. Both patients make similar proportions of phonological errors in speech production and the errors have similar characteristics. A closer analysis, however, shows a number of differences. DB's phonological errors involve, for the most part, simplifications of syllabic structure; they affect consonants more than vowels; and, among vowels, they show effects of sonority/complexity. This error pattern may reflect articulatory difficulties. MM's errors, instead, show little effect of syllable structure, affect vowels at least as much as consonants and, and affect all different vowels to a similar extent. This pattern is consistent with a more central impairment involving the selection of the right phoneme among competing alternatives. We propose that, at this level, vowel selection may be more difficult than consonant selection because vowels belong to a smaller set of repeatedly activated units.

Women beware women: detective fiction and critical discourse stylistics

This article examines the work of four contemporary writers of detective fiction (P.D. James, Amanda Cross, Sara Paretsky and Ruth Rendell/Barbara Vine) from a critical discourse stylistics perspective with the objective of raising the reader’s awareness of the ideological processes that are manifested in the language of these texts. It considers how these writers deal with stereotypical assumptions, how they cope with socially-determined traditional roles and verify whether their choices result in the articulation of an alternative discourse. The investigation arrives at some identifiable cultural and linguistic characteristics which may be singular to this new group of writers. We suggest that by challenging traditional representations of women, these writers may be offering a reconstruction of the genre.

Innovation, ownership and profitability

There is lots of evidence that innovating firms are persistently more profitable than non-innovators, but little agreement on why this is the case. It may be because innovators are somehow able to protect their new products from the competition which normally erodes profits, or because innovating firms have superior capabilities and are able to introduce multiple innovations over time. And very little is known about the relationship between innovation, external ownership and profitability, despite the fact that foreign-owned firms are frequently highly innovative and very profitable. This paper considers the relationship between innovation, ownership and profitability for a panel of manufacturing plants in Ireland and Northern Ireland. We consider the link between innovation and profits separately for innovators and non-innovators, and for indigenous innovators and non-innovators and externally-owned plants. We also consider the determinants of innovation over the distribution of plant-level profitability, and find that the determinants of profitability – including innovation and external ownership – are quite different for low and high-profitability plants. We find support for the view that innovators and non-innovators have different profitability determinants, and that externally-owned plants have their profitability determined in a quite different way from indigenous enterprises. For indigenous non-innovators only the sector matters. Profitability in these enterprises is dictated largely by the industry they are in, with plants having virtually no means of differentiating their profitability from the norms of the industry. By contrast, indigenously-owned innovators are able to differentiate their profit performance from industry norms to some extent. Absolute size matters (negatively) and they get a strong boost from product innovation, but having a high market share does not matter for the profitability of indigenously-owned innovators. Externally-owned plants have a quite different set of profitability determinants from both of these groups. What matters for these plants is not the boost they get from innovating (there is none) but instead their position in the domestic market – a high market share boosts profitability. In policy terms our results suggest both optimistic and cautionary messages. On the positive side our results suggest that efforts to promote innovation activity among indigenously-owned plants are likely to have significant longer term benefits through their capability effects. For the development agencies in Ireland this is a reassuring result. On the more negative side, the lack of any relationship in our models between the innovation activities of externally-owned plants and their (profitability) performance raises potential concerns. This finding may reflect the lack of linkages between externally-owned plants and their Irish resource base, in turn raising some worrying issues about the ‘embeddedness’ of much FDI into Ireland and therefore its ‘stickiness’ in the face of Ireland’s increasing high relative cost base.

Raising rivals' fixed costs

This paper analyses the strategic use of fixed costs to deter entry or monopolize a market in a standard Cournot framework. First of all a general case shows how the presence of fixed costs can affect the possible equilibria to the Cournot game. It is shown that the presence of a firm with a first-mover advantage can have important implications if fixed costs are raised. In addition the forward induction process becomes important in determining plausible equilibria. The use of firstly regulation and secondly ‘nuisance’ law-suits are considered as strategies to increase fixed costs.

Raising the bar for systematic conservation planning

Mathematical methods in systematic conservation planning (SCP) represent a significant step toward cost-effective, transparent allocation of resources for biodiversity conservation. However, research demonstrates important consequences of uncertainties in SCP. Current research often relies on simplified case studies with unknown forms and amounts of uncertainty and low statistical power for generalizing results. Consequently, conservation managers have little evidence for the true performance of conservation planning methods in their own complex, uncertain applications. SCP needs to build evidence for predictive models of error and robustness to multiple, simultaneous uncertainties across a wide range of problems of known complexity. Only then can we determine true performance rather than how a method appears to perform on data with unknown uncertainty.

Bioreaction and separation in preparative batch chromatographic columns : the hydrology of lactose to yield glucose,galactose and oligosaccharides

The initial aim of this project was to improve the performance of a chromatographic bioreactor-separator (CBRS). In such a system, a dilute enzyme solution is pumped continuously through a preparative chromatographic column, while pulses of substrate are periodically injected on to the column. Enzymic reaction and separation are therefore performed in a single unit operation. The chromatographic columns used were jacketed glass columns ranging from 1 to 2 metres long with an internal diameter of 1.5 cm. Linking these columns allowed 1, 2, 3 and 4 metre long CBRS systems to be constructed. The hydrolysis of lactose in the presence of β~galactosidase was the reaction of study. From previous work at Aston University, there appeared to be no difficulties in achieving complete lactose hydrolysis in a CBRS. There did, however, appear to be scope for improving the separative performance, so this was adopted as an initial goal. Reducing the particle size of the stationary phase was identified as a way of achieving this improvement. A cation exchange resin was selected which had an average particle size of around half that previously used when studying this reaction. A CBRS system was developed which overcame the operational problems (such as high pressure drop development) associated with use of such a particle size. A significant improvement in separative power was achieved. This was shown by an increase in the number of theoretical plates (N) from about 500 to about 3000 for a 2 metre long CBRS, coupled with higher resolution. A simple experiment with the 1 metre column showed that combined bioreaction and separation was achievable in this system. Having improved the separative performance of the system, the factors affecting enzymic reaction in a CBRS were investigated; including pulse volume and the degree of mixing between enzyme and substrate. The progress of reaction in a CBRS was then studied. This information was related to the interaction of reaction and separation over the reaction zone. The effect of injecting a pulse over a length of time as in CBRS operation was simulated by fed batch experiments. These experiments were performed in parallel with normal batch experiments where the substrate is mixed almost instantly with the enzyme. The batch experiments enabled samples to be taken every minute and revealed that reaction is very rapid. The hydrodynamic characteristics of the two injector configurations used in CBRS construction were studied using Magnetic Resonance Imaging, combined with hydrodynamic calculations. During the optimisation studies, galactooligosaccharides (GOS) were detected as intermediates in the hydrolysis process. GOS are valuable products with potential and existing applications in food manufacture (as nutraceuticals), medicine and drug targeting. The focus of the research was therefore turned to GOS production. A means of controlling reaction to arrest break down of GOS was required. Raising temperature was identified as a possible means of achieving this within a CBRS. Studies were undertaken to optimise the yield of oligosaccharides, culminating in the design, construction and evaluation of a Dithermal Chromatographic Bioreactor-separator.

The production, harvest and adsorptive recovery of an infectious herpes simplex virus vaccine

At present there is not a reliable vaccine against herpes virus. Viral protein vaccines as yet have proved unsuccessful to meet the challenge of raising an appropriate immune response. Cantab Pharmaceuticals has produced a virus vaccine that can undergo one round of replication in the recipient in order to produce a more specific immune reaction. This virus is called Disabled Infectious Single Cycle Herpes Simplex Virus (DISC HSV) which has been derived by deleting the essential gH gene from a type 2 herpes virus. This vaccine has been proven to be effective in animal studies. Existing methods for the purification of viruses rely on laboratory techniques and for vaccine production would be on a far too small a scale. There is therefore a need for new virus purification methods to be developed in order to meet these large scale needs. An integrated process for the manufacture of a purified recombinant DISC HSV is described. The process involves culture of complementing Vero (CR2) cells, virus infection and manufacture, virus harvesting and subsequent downstream processing. The identification of suitable growth parameters for the complementing cell line and optimal limes for both infection and harvest are addressed. Various traditional harvest methods were investigated and found not to be suitable for a scaled up process. A method of harvesting, that exploits the elution of cell associated viruses by the competitive binding of exogenous heparin to virus envelope gC proteins, is described and is shown to yield significantly less contaminated process streams than sonication or osmotic approaches that involve cell rupture (with> 10-fold less complementing cell protein). High concentrations of salt (>0.8M NaCl) exhibit the same effect, although the high osmotic strength ruptures cells and increase the contamination of the process stream. This same heparin-gC protein affinity interaction is also shown to provide an efficient adsorptive purification procedure for herpes viruses which avoids the need to pre-treat the harvest material, apart from clarification, prior to chromatography. Subsequent column eluates provide product fractions with a 100-fold increase in virus titre and low levels of complementing cell protein and DNA (0.05 pg protein/pfu and 1.2 x 104 pg DNA/pfu respectively).

Bottom-up risk regulation? How nanotechnology risk knowledge gaps challenge federal and state environmental agencies

Nanotechnologies have been called the "Next Industrial Revolution." At the same time, scientists are raising concerns about the potential health and environmental risks related to the nano-sized materials used in nanotechnologies. Analyses suggest that current U.S. federal regulatory structures are not likely to adequately address these risks in a proactive manner. Given these trends, the premise of this paper is that state and local-level agencies will likely deal with many "end-of-pipe" issues as nanomaterials enter environmental media without prior toxicity testing, federal standards, or emissions controls. In this paper we (1) briefly describe potential environmental risks and benefits related to emerging nanotechnologies; (2) outline the capacities of the Toxic Substances Control Act, the Clean Air Act, the Clean Water Act, and the Resources Conservation and Recovery Act to address potential nanotechnology risks, and how risk data gaps challenge these regulations; (3) outline some of the key data gaps that challenge state-level regulatory capacities to address nanotechnologies' potential risks, using Wisconsin as a case study; and (4) discuss advantages and disadvantages of state versus federal approaches to nanotechnology risk regulation. In summary, we suggest some ways government agencies can be better prepared to address nanotechnology risk knowledge gaps and risk management.

The role of analogy in spelling in English primary school children - a partial intervention study

The English writing system is notoriously irregular in its orthography at the phonemic level. It was therefore proposed that focusing beginner-spellers’ attention on sound-letter relations at the sub-syllabic level might improve spelling performance. This hypothesis was tested in Experiments 1 and 2 using a ‘clue word’ paradigm to investigate the effect of analogy teaching intervention / non-intervention on the spelling performance of an experimental group and controls. The results overall showed the intervention to be effective in improving spelling, and this effect to be enduring. Experiment 3 demonstrated a greater application of analogy in spelling, when clue words, which participants used in analogy to spell test words, remained in view during testing. A series of regression analyses, with spelling entered as the criterion variable and age, analogy and phonological plausibility (PP) as predictors, showed both analogy and PP to be highly predictive of spelling. Experiment 4 showed that children could use analogy to improve their spelling, even without intervention, by comparing their performance in spelling words presented in analogous categories or in random lists. Consideration of children’s patterns of analogy use at different points of development showed three age groups to use similar patterns of analogy, but contrasting analogy patterns for spelling different words. This challenges stage theories of analogy use in literacy. Overall the most salient units used in analogy were the rime and, to a slightly lesser degree, the onset-vowel and vowel. Finally, Experiment 5 showed analogy and phonology to be fairly equally influential in spelling, but analogy to be more influential than phonology in reading. Five separate experiments therefore found analogy to be highly influential in spelling. Experiment 5 also considered the role of memory and attention in literacy attainment. The important implications of this research are that analogy, rather than purely phonics-based strategy, is instrumental in correct spelling in English.

Control of soundness and mechanical properties in aluminium-silicon-magnesium alloys

Previously, specifications for mechanical properties of casting alloys were based on separately cast test bars. This practice provided consistently reproducible results; thus, any change in conditions was reflected in changes in the mechanical properties of the test coupons. These test specimens, however, did not necessarily reflect the actual mechanical properties of the castings they were supposed to represent'. Factors such as section thickness and casting configuration affect the solidification rate and soundness of the casting thereby raising or lowering its mechanical properties in comparison with separately cast test specimens. In the work now reported, casting shapes were developed to investigate the variations of section thickness, chemical analysis and heat treatment on the mechanical properties of a high strength Aluminium alloy under varying chilling conditions. In addition, an insight was sought into the behaviour of chills under more practical conditions. Finally, it was demonstrated that additional information could be derived from the radiographs which form an essential part of the quality control of premium quality castings. As a result of the work, it is now possible to select analysis and chilling conditions to optimize the as cast and the heat treated mechanical properties of Aluminum 7% Silicon 0.3% Magnesium alloy.

Isolation, characterisation and application of novel microbial protein cross-linking enzymes

Microbial transglutaminase is favoured for use in industry over the mammalian isoform, and hence has been utilized, to great effect, as an applied biocatalyst in many industrial areas including the food and textiles industries. There are currently only a limited number of microbial TGase sources known. A number of organisms have been screened for transglutaminase activity using biochemical assays directed towards TGase catalyzed reactions (amine incorporation and peptide cross-linking assay). Of those organisms screened, TGase was identified in a number of isolates including members of the Bacillus and Streptomyces families. In addition, a protein capable of performing a TGase-like reaction was identified in the organism Pseudomonas putida that was deemed immunologically distinct from previously described TGase isoforms, though further work would be required to purify the protein responsible. The genuses Streptoverticillium and Streptomyces are known to be closely related. A number of micro-organisms relating to Streptomyces mobaraensis (formerly Streptoverticillium mobaraensis) have been identified as harboring a TGase enzyme. The exact biological role of Streptomyces TGase is not well understood, though from work undertaken here it would appear to be involved in cell wall growth. Comparison of the purified Streptomyces TGase proteins showed them to exhibit marginally different characteristics in relation to enzymatic activity and pH dependency upon comparison with Streptomyces mobaraensis TGase. In addition, TGase was identified in the organism Saccharomonospora viridis that was found to be genetically identical to that from S. mobaraensis raising questions about the enzymes dissemination in nature. TGase from S. baldaccii was found to be most diverse with respect to enzymatic characteristics whilst still retaining comparable E(y-glutamyl) lysine bond formation to S. mobaraensis TGase. As such S. baldaccii TGase was cloned into an expression vector enabling mass production of the enzyme thereby providing a viable alternative to S. mobaraensis TGase for many industrial processes.

The verbal transformation effect:an exploration of the perceptual organization of speech

Six experiments investigated the influence of several grouping cues within the framework of the Verbal Transformation Effect (VTE, Experiments 1 to 4) and Phonemic Transformation Effect (PTE, Experiments 5 and 6), where listening to a repeated word (VTE) or sequence of vowels (PTE) produces verbal transformations (VTs). In Experiment 1, the influence of F0 frequency and lateralization cues (ITDs) was investigated in terms of the pattern of VTs. As the lateralization difference increased between two repeating sequences, the number of forms was significantly reduced with the fewest forms reported in the dichotic condition. Experiment 2 explored whether or not propensity to report more VTs on high pitch was due to the task demands of monitoring two sequences at once. The number of VTs reported was higher when listeners were asked to attend to one sequence only, suggesting smaller attentional constraints on the task requirements. In Experiment 3, consonant-vowel transitions were edited out from two sets of six stimuli words with ‘strong’ and ‘weak’ formant transitions, respectively. Listeners reported more forms in the spliced-out than in the unedited case for the strong-transition words, but not for those with weak transitions. A similar trend was observed for the F0 contour manipulation used in Experiment 4 where listeners reported more VTs and forms for words following a discontinuous F0 contour. In Experiments 5 and 6, the role of F0 frequency and ITD cues was investigated further using a related phenomenon – the PTE. Although these manipulations had relatively little effect on the number of VTs and forms reported, they did influence the particular forms heard. In summary, the current experiments confirmed that it is possible to successfully investigate auditory grouping cues within the VTE framework and that, in agreement with recent studies, the results can be attributed to the perceptual re-grouping of speech sounds.

Ownership characteristics and access to finance:evidence from a survey of large privatised companies in Hungary and Poland

We examine financial constraints and forms of finance used for investment, by analysing survey data on 157 large privatised companies in Hungary and Poland for the period 1998 - 2000. The Bayesian analysis using Gibbs sampling is carried out to obtain inferences about the sample companies' access to finance from a model for categorical outcome. By applying alternative measures of financial constraints we find that foreign companies, companies that are part of domestic industrial groups and enterprises with concentrated ownership are all less constrained in their access to finance. Moreover, we identify alternative modes of finance since different corporate control and past performance characteristics influence the sample firms' choice of finance source. In particular, while being industry-specific, the access to domestic credit is positively associated with company size and past profitability. Industrial group members tend to favour bond issues as well as sells-offs of assets as appropriate types of finance for their investment programmes. Preferences for raising finance in the form of equity are associated with share concentration in a non-monotonic way, being most prevalent in those companies where the dominant owner holds 25%-49% of shares. Close links with a leading bank not only increase the possibility of bond issues but also appear to facilitate access to non-banking sources of funds, in particular, to finance supplied by industrial partners. Finally, reliance on state finance is less likely for the companies whose profiles resemble the case of unconstrained finance, namely, for companies with foreign partners, companies that are part of domestic industrial groups and companies with a strategic investor. Model implications also include that the use of state funds is less likely for Polish than for Hungarian companies.

Using architecture models to support the generation and operation of component-based adaptive systems

Modelling architectural information is particularly important because of the acknowledged crucial role of software architecture in raising the level of abstraction during development. In the MDE area, the level of abstraction of models has frequently been related to low-level design concepts. However, model-driven techniques can be further exploited to model software artefacts that take into account the architecture of the system and its changes according to variations of the environment. In this paper, we propose model-driven techniques and dynamic variability as concepts useful for modelling the dynamic fluctuation of the environment and its impact on the architecture. Using the mappings from the models to implementation, generative techniques allow the (semi) automatic generation of artefacts making the process more efficient and promoting software reuse. The automatic generation of configurations and reconfigurations from models provides the basis for safer execution. The architectural perspective offered by the models shift focus away from implementation details to the whole view of the system and its runtime change promoting high-level analysis. © 2009 Springer Berlin Heidelberg.

Causal relationship between HRM policies and organisational performance:evidence from the Greek manufacturing sector

Blending insights from the contingency theory, the resource-based view, and the AMO theory, the purpose of this paper is to investigate the HRM-performance causal relationship in the Greek context. The empirical research is based on a sample of 178 organisations operating in the Greek manufacturing sector. Using structural equation modelling the results of the study revealed that the ability to perform (resourcing and development), motivation to perform (compensation and incentives), and opportunity to perform (involvement and job design) HRM policy domains are moderated by business strategies (cost, quality, innovation), and additionally, the motivation to perform is further moderated by managerial style and organisational culture. Further, the results indicate that the impact of HRM policies on organisational performance is fully mediated by employee skills, attitudes, and behaviour. The paper concludes that although the motivation to perform HRM policy domain causes organisational performance, through employee attitudes, it may be supported that organisational performance positively moderates the effectiveness of this HRM policy domain, raising thus the question of reverse causality.