Comparative performance between two photogrammetric systems and a reference laser tracker network for large-volume industrial measurement

This paper determines the capability of two photogrammetric systems in terms of their measurement uncertainty in an industrial context. The first system – V-STARS inca3 from Geodetic Systems Inc. – is a commercially available measurement solution. The second system comprises an off-the-shelf Nikon D700 digital camera fitted with a 28 mm Nikkor lens and the research-based Vision Measurement Software (VMS). The uncertainty estimate of these two systems is determined with reference to a calibrated constellation of points determined by a Leica AT401 laser tracker. The calibrated points have an average associated standard uncertainty of 12·4 μm, spanning a maximum distance of approximately 14·5 m. Subsequently, the two systems’ uncertainty was determined. V-STARS inca3 had an estimated standard uncertainty of 43·1 μm, thus outperforming its manufacturer's specification; the D700/VMS combination achieved a standard uncertainty of 187 μm.

Planar solid oxide fuel cell modeling and optimization targeting the stack's temperature gradient minimization

Minimization of undesirable temperature gradients in all dimensions of a planar solid oxide fuel cell (SOFC) is central to the thermal management and commercialization of this electrochemical reactor. This article explores the effective operating variables on the temperature gradient in a multilayer SOFC stack and presents a trade-off optimization. Three promising approaches are numerically tested via a model-based sensitivity analysis. The numerically efficient thermo-chemical model that had already been developed by the authors for the cell scale investigations (Tang et al. Chem. Eng. J. 2016, 290, 252-262) is integrated and extended in this work to allow further thermal studies at commercial scales. Initially, the most common approach for the minimization of stack's thermal inhomogeneity, i.e., usage of the excess air, is critically assessed. Subsequently, the adjustment of inlet gas temperatures is introduced as a complementary methodology to reduce the efficiency loss due to application of excess air. As another practical approach, regulation of the oxygen fraction in the cathode coolant stream is examined from both technical and economic viewpoints. Finally, a multiobjective optimization calculation is conducted to find an operating condition in which stack's efficiency and temperature gradient are maximum and minimum, respectively.

Clustering web documents using hierarchical representation with multi-granularity

Web document cluster analysis plays an important role in information retrieval by organizing large amounts of documents into a small number of meaningful clusters. Traditional web document clustering is based on the Vector Space Model (VSM), which takes into account only two-level (document and term) knowledge granularity but ignores the bridging paragraph granularity. However, this two-level granularity may lead to unsatisfactory clustering results with “false correlation”. In order to deal with the problem, a Hierarchical Representation Model with Multi-granularity (HRMM), which consists of five-layer representation of data and a twophase clustering process is proposed based on granular computing and article structure theory. To deal with the zero-valued similarity problemresulted from the sparse term-paragraphmatrix, an ontology based strategy and a tolerance-rough-set based strategy are introduced into HRMM. By using granular computing, structural knowledge hidden in documents can be more efficiently and effectively captured in HRMM and thus web document clusters with higher quality can be generated. Extensive experiments show that HRMM, HRMM with tolerancerough-set strategy, and HRMM with ontology all outperform VSM and a representative non VSM-based algorithm, WFP, significantly in terms of the F-Score.

Hong-Ou-Mandel interference with a single atom

The Hong-Ou-Mandel (HOM) effect is widely regarded as the quintessential quantum interference phenomenon in optics. In this work we examine how nonlinearity can smear statistical photon bunching in the HOM interferometer. We model both the nonlinearity and a balanced beam splitter with a single two-level system and calculate a finite probability of anti-bunching arising in this geometry. We thus argue that the presence of such nonlinearity would reduce the visibility in the standard HOM setup, offering some explanation for the diminution of the HOM visibility observed in many experiments. We use the same model to show that the nonlinearity affects a resonant two-photon propagation through a two-level impurity in a waveguide due to a " weak photon blockade" caused by the impossibility of double-occupancy and argue that this effect might be stronger for multi-photon propagation.

Retail restructuring and consumer choice 2:understanding consumer choice at the household level

This paper complements the preceding one by Clarke et al, which looked at the long-term impact of retail restructuring on consumer choice at the local level. Whereas the previous paper was based on quantitative evidence from survey research, this paper draws on the qualitative phases of the same three-year study, and in it we aim to understand how the changing forms of retail provision are experienced at the neighbourhood and household level. The empirical material is drawn from focus groups, accompanied shopping trips, diaries, interviews, and kitchen visits with eight households in two contrasting neighbourhoods in the Portsmouth area. The data demonstrate that consumer choice involves judgments of taste, quality, and value as well as more ‘objective’ questions of convenience, price, and accessibility. These judgments are related to households’ differential levels of cultural capital and involve ethical and moral considerations as well as more mundane considerations of practical utility. Our evidence suggests that many of the terms that are conventionally advanced as explanations of consumer choice (such as ‘convenience’, ‘value’, and ‘habit’) have very different meanings according to different household circumstances. To understand these meanings requires us to relate consumers’ at-store behaviour to the domestic context in which their consumption choices are embedded. Bringing theories of practice to bear on the nature of consumer choice, our research demonstrates that consumer choice between stores can be understood in terms of accessibility and convenience, whereas choice within stores involves notions of value, price, and quality. We also demonstrate that choice between and within stores is strongly mediated by consumers’ household contexts, reflecting the extent to which shopping practices are embedded within consumers’ domestic routines and complex everyday lives. The paper concludes with a summary of the overall findings of the project, and with a discussion of the practical and theoretical implications of the study.

Integrated component scheduling models for chip shooter machines

This paper focuses on minimizing printed circuit board (PCB) assembly time for a chipshootermachine, which has a movable feeder carrier holding components, a movable X–Y table carrying a PCB, and a rotary turret with multiple assembly heads. The assembly time of the machine depends on two inter-related optimization problems: the component sequencing problem and the feeder arrangement problem. Nevertheless, they were often regarded as two individual problems and solved separately. This paper proposes two complete mathematical models for the integrated problem of the machine. The models are verified by two commercial packages. Finally, a hybrid genetic algorithm previously developed by the authors is presented to solve the model. The algorithm not only generates the optimal solutions quickly for small-sized problems, but also outperforms the genetic algorithms developed by other researchers in terms of total assembly time.

Achieving cost competitiveness with an agent based integrated process planning and production scheduling system

From a manufacturing perspective, the efficiency of manufacturing operations (such as process planning and production scheduling) are the key element for enhancing manufacturing competence. Process planning and production scheduling functions have been traditionally treated as two separate activities, and have resulted in a range of inefficiencies. These include infeasible process plans, non-available/overloaded resources, high production costs, long production lead times, and so on. Above all, it is unlikely that the dynamic changes can be efficiently dealt with. Despite much research has been conducted to integrate process planning and production scheduling to generate optimised solutions to improve manufacturing efficiency, there is still a gap to achieve the competence required for the current global competitive market. In this research, the concept of multi-agent system (MAS) is adopted as a means to address the aforementioned gap. A MAS consists of a collection of intelligent autonomous agents able to solve complex problems. These agents possess their individual objectives and interact with each other to fulfil the global goal. This paper describes a novel use of an autonomous agent system to facilitate the integration of process planning and production scheduling functions to cope with unpredictable demands, in terms of uncertainties in product mix and demand pattern. The novelty lies with the currency-based iterative agent bidding mechanism to allow process planning and production scheduling options to be evaluated simultaneously, so as to search for an optimised, cost-effective solution. This agent based system aims to achieve manufacturing competence by means of enhancing the flexibility and agility of manufacturing enterprises.

Entry, reforms complementarity and performance:a tale of two Indian manufacturing sectors

In this paper, we use plant-level data from two Indian industries, namely, electrical machinery and textiles, to examine the empirical relationship between structural reforms like abandonment of entry restrictions to the product market, competition and firm-level productivity and efficiency. These industries have faced different sets of policies since Independence but both were restricted in the adoption of technology and in the development of optimal scales of production. They also belonged to the first set of industries that benefited from the liberalization process started in the 1980s. Our results suggest that both the industries have improved their efficiency and scales of operation by the turn of the century. However, the process of adjustment seems to have been worked out more fully for electrical machinery. We also find evidence of spatial fragmentation of the market as late as 2000–2001. Gains in labour productivity were much more evident in states that either have a strong history of industrial activity or those that have experienced significant improvements in business environment since 1991.

The two forms of visuo-spatial perspective taking are differently embodied and subserve different spatial prepositions

We set out to distinguish level 1 (VPT-1) and level 2 (VPT-2) perspective taking with respect to the embodied nature of the underlying processes as well as to investigate their dependence or independence of response modality (motor vs. verbal). While VPT-1 reflects understanding of what lies within someone else’s line of sight, VPT-2 involves mentally adopting someone else’s spatial point of view. Perspective taking is a high-level conscious and deliberate mental transformation that is crucially placed at the convergence of perception, mental imagery, communication, and even theory of mind in the case of VPT-2. The differences between VPT-1 and VPT-2 mark a qualitative boundary between humans and apes, with the latter being capable of VPT-1 but not of VPT-2. However, our recent data showed that VPT-2 is best conceptualized as the deliberate simulation or emulation of a movement, thus underpinning its embodied origins. In the work presented here we compared VPT-2 to VPT-1 and found that VPT-1 is not at all, or very differently embodied. In a second experiment we replicated the qualitatively different patterns for VPT-1 and VPT-2 with verbal responses that employed spatial prepositions. We conclude that VPT-1 is the cognitive process that subserves verbal localizations using “in front” and “behind,” while VPT-2 subserves “left” and “right” from a perspective other than the egocentric. We further conclude that both processes are grounded and situated, but only VPT-2 is embodied in the form of a deliberate movement simulation that increases in mental effort with distance and incongruent proprioception. The differences in cognitive effort predict differences in the use of the associated prepositions. Our findings, therefore, shed light on the situated, grounded and embodied basis of spatial localizations and on the psychology of their use.