Some studies relating to the design of shallow, fluidized bed boilers

The concept of shallow fluidized bed boilers is defined and a preliminary working design for a gas-fired package boiler has been produced. Those areas of the design requiring further study have been specified. Experimental investigations concerning these areas have been carried out. A two-dimensional, conducting paper analog has been developed for the specific purpose of evaluating sheet fins. The analog has been generalised and is presented as a simple means of simulating the general, two-dimensional Helmholtz equation. By recording the transient response of spherical, calorimetric probes when plunged into heated air-fluidized beds, heat transfer coefficients have been measured at bed temperatures up to 1 100°C. A correlation fitting all the data to within ±10% has been obtained. A model of heat transfer to surfaces immersed in high temperature beds has been proposed. The model solutions are, however, only in qualitative agreement with the experimental data. A simple experimental investigation has revealed that the effective, radial, thermal conductivities of shallow fluidized beds are an order of magnitude lower than the axial conductivities. These must, consequently, be taken into account when considering heat transfer to surfaces immersed within fluidized beds. Preliminary work on pre-mixed gas combustion and some further qualitative experiments have been used as the basis for discussing the feasibility of combusting heavy fuel oils within shallow beds. The use of binary beds, within which the fuel could be both gasified and subsequently burnt, is proposed. Finally, the consequences of the experimental studies on the initial design are considered, and suggestions for further work are made.

Internationalization of small and medium sized UK manufacturing enterprises:technology and knowledge transfer perspective

This dissertation examines internationalisation of small and medium sized enterprises. There has been a journey to achieve this. The research has started as an action research as Teaching Company Scheme Associate. This has been done in two research cycles, which investigated factors for successful internationalisation of a small and medium sized UK manufacturing enterprise. This has revealed that successful internationalisation requires good technology and knowledge transfer to the new operations. The action research is followed by a survey that has been conducted within UK manufacturing companies. The data collected was analysed under three models: entry mode selection, role of factory and level of internationalisation. The first two models explain two major aspects of internationalisation decision. The last is showing what makes successful internationalising small and medium sized companies. These models provided several important results. The small and medium sized enterprise internationalisation is harder to achieve because most of these organisations do not have experience in technology and knowledge transfer. The success of internationalisation depends on the success of the transfer. This is achieved through employee ownership of the new knowledge. There are many factors affecting this result such as the network relationships such as trust, control and commitment and cognitive distance between two organisations. The last is a product of the difference between prior knowledge and the required level of knowledge. The entry mode and role of factory are decided through these factors while the level of internationalisation can only be explained by absorptive capacity of the recipient organisation and the technology transfer ability of the host organisation.

Policy transfer in practice:implementing supplier diversity in the UK

This article draws on the policy transfer literature to examine a UK-based initiative to promote supplier diversity and provides insights into three areas neglected in current research, namely: the dynamics of non-governmental policy transfer; the factors that mediate policy transfer in different jurisdictions; and the integration of research and practice in small business related policy transfer. To this end, an innovative action research approach is deployed with the dual purpose of effecting practical change and advancing knowledge. This comprises two phases: first, a realist analysis of the US National Minority Supplier Development Council (NMSDC), an exemplar intermediary; and second, the implementation and concurrent realist evaluation of a supplier diversity initiative modelled on NMSDC, referred to as ‘Supplier Development East Midlands’ (SDEM). The findings provide lessons for academics and practitioners dealing with small and medium-sized enterprise (SME) policy transfer in general and supplier diversity intermediaries in particular.

Photodeposition as a facile route to tunable Pt photocatalysts for hydrogen production:on the role of methanol

Photodeposition of H2PtCl6 in the presence of methanol promotes the formation of highly dispersed, metallic Pt nanoparticles over titania, likely via capture of photogenerated holes by the alcohol to produce an excess of surface electrons for substrate-mediated transfer to Pt complexes, resulting in a high density of surface nucleation sites for Pt reduction. Photocatalytic hydrogen production from water is proportional to the surface density of Pt metal co-catalyst, and hence photodeposition in the presence of high methanol concentrations affords a facile route to optimising photocatalyst design and highlights the importance of tuning co-catalyst properties in photocatalysis.

Kinetic studies of the photopolymerisation of acrylamide in aqueous solution:effects of bromoform as a Chain transfer agent

The effects of adding bromoform (CHBr3) as a potential chain transfer agent in the photopolymerisation of acrylamide (AM) in aqueous solution have been studied both in terms of influencing the rate of polymerisation and the molecular weight of the polyacrylamide (PAM) formed. Using 4,4′-azo-bis(4-cyanopentanoic acid) (ACPA) as photoinitiator, two different CHBr3 concentrations as chain transfer agent were compared: 0.5 and 2.0 mol % (relative to AM), the higher of which was determined by the limit of CHBr3 water solubility. The results showed that CHBr3 was an effective chain transfer agent that could regulate the molecular weight of the PAM formed without seriously affecting the polymerisation rate. It is concluded that chain transfer to CHBr3occurs by both Br and H atom transfer although Br transfer is the more favoured due to the weaker C-Br bond. Furthermore, Br transfer leads to Br-terminated chains in which the terminal C-Br bond can re-dissociate leading to re-initiation and re-propagation of the same chain, thereby maintaining the polymerisation rate. Continuing studies into how this mechanism can be exploited in order to synthesize water-soluble block copolymers of potential biomedical importance are currently in progress.

Category learning induces position invariance of pattern recognition across the visual field

Human object recognition is considered to be largely invariant to translation across the visual field. However, the origin of this invariance to positional changes has remained elusive, since numerous studies found that the ability to discriminate between visual patterns develops in a largely location-specific manner, with only a limited transfer to novel visual field positions. In order to reconcile these contradicting observations, we traced the acquisition of categories of unfamiliar grey-level patterns within an interleaved learning and testing paradigm that involved either the same or different retinal locations. Our results show that position invariance is an emergent property of category learning. Pattern categories acquired over several hours at a fixed location in either the peripheral or central visual field gradually become accessible at new locations without any position-specific feedback. Furthermore, categories of novel patterns presented in the left hemifield are distinctly faster learnt and better generalized to other locations than those learnt in the right hemifield. Our results suggest that during learning initially position-specific representations of categories based on spatial pattern structure become encoded in a relational, position-invariant format. Such representational shifts may provide a generic mechanism to achieve perceptual invariance in object recognition.

Meeting technology needs of enterprises for national competitiveness

This paper addresses the question of how enterprises can improve their competitiveness through the acquisition and development of technology, and hence how countries are able to raise the level of industrial development and grow their GDP. It takes the example of East Asia to demonstrate how fast economic growth can be achieved through the 'stages' approach to technology acquisition and development. It also provides some case studies of technology transfer to China as a means of illustrating how successful transfer can be achieved and the problems that can be encountered. Finally, some comparisons are made with, and among, the Arab countries and an attempt is made to draw some lessons for the development of the Arab world from experiences gained elsewhere. Copyright © 2005 Inderscience Enterprises Ltd.

Radiation effects in metal-oxide-semiconductor capacitors

An investigation has been undertaken into the effects of various radiations on commercially made Al-SiO2-Si Capacitors (MOSCs). Detailed studies of the electrical and physical nature of such devices have been used to characterise both virgin and irradiated devices. In particular, an investigation of the nature and causes of dielectric breakdown in MOSCs has revealed that intrinsic breakdown is a two-stage process dominated by charge injection in a pre-breakdown stage; this is associated with localised high-field injection of carriers from the semiconductor substrate to interfacial and bulk charge traps which, it is proposed, leads to the formation of conducting channels through the dielectric with breakdown occurring as a result of the dissipation of the conduction band energy. A study of radiation-induced dielectric breakdown has revealed the possibility of anomalous hot-electron injection to an excess of bulk oxide traps in the ionization channel produced by very heavily ionizing radiation, which leads to intrinsic breakdown in high-field stressed devices. These findings are interpreted in terms of a modification to the model for radiation-induced dielectric breakdown based upon the primary dependence of breakdown on charge injection rather than high-field mechanisms. The results of a detailed investigation of charge trapping and interface state generation in such MOSCs due to various radiations has revealed evidence of neutron induced interface states, and of the generation of positive oxide charge in devices due to all of the radiations tested. In particular, the greater the linear energy transfer of the radiation, the greater the magnitude of charge trapped in the oxide and the greater the number of interface states generated. These findings are interpreted in terms of Si-H and Si-OH bond-breaking at the Si-SiO2 interface which is enhanced by charge carrier transfer to the interface and by anomalous charge injection to compensate for the excess of charge carriers created by the radiation.

The development of discourse in a discourse of development:a case study of a group constructing a new discourse.

This thesis is a qualitative case study drawing on discourse analysis and ethnographic traditions. The aim of the study is to provide a description of the discourse consciously constructed by a group of six TESOL professionals in the interests of their own development. Once a week, the group met for one hour and took turns to act as 'Speaker'. The other five individuals acted as Understanders. The extra space given to the Speaker allowed a fuller articulation of a problem or focus than would normally be possible in other professional talk. The Understanders contributed moves to support this articulation. The description covers a two-year period (1998-2000) of this constructed discourse. Data, collected during this period, are drawn from several different sources: recordings, interviews, diaries and critical incident journals. The main recordings are of the actual Group Development Meetings (GDMs). Discussion of six transcribed GDMs demonstrates which discourse choices and decisions were important. In particular, the study looks at the key role played by 'Reflection' in this process. It is argued that Reflection is the key element in supporting the Speaker. The analysis of Reflection, which is considered from four perspectives (values, purpose, form and outcomes) draws on data from the featured cases. Issues relating to the transfer to other groups of this discourse-based approach to professional development are considered.

Block copolymer strategies for solar cell technology

A simple overview of the methods used and the expected benefits of block copolymers in organic photovoltaic devices is given in this review. The description of the photovoltaic process makes it clear how the detailed self-assembly properties of block copolymers can be exploited. Organic photovoltaic technology, an inexpensive, clean and renewable energy source, is an extremely promising option for replacing fossil fuels. It is expected to deliver printable devices processed on flexible substrates using high-volume techniques. Such devices, however, currently lack the long-term stability and efficiency to allow organic photovoltaics to surpass current technologies. Block copolymers are envisaged to help overcome these obstacles because of their long term structural stability and their solid-state morphology being of the appropriate dimensions to efficiently perform charge collection and transfer to electrodes.

Classical and technological convergence:beyond the Solow-Swann model

Recent investigations into cross-country convergence follow Mankiw, Romer, and Weil (1992) in using a log-linear approximation to the Swan-Solow growth model to specify regressions. These studies tend to assume a common and exogenous technology. In contrast, the technology catch-up literature endogenises the growth of technology. The use of capital stock data renders the approximations and over-identification of the Mankiw model unnecessary and enables us, using dynamic panel estimation, to estimate the separate contributions of diminishing returns and technology transfer to the rate of conditional convergence. We find that both effects are important.