On the adoption decision and the intensity of use of complementary innovations: The intra firm diffusion of management practices across UK establishments

This paper contributes to the literature on the intra-firm diffusion of innovations by investigating the factors that affect the firm’s decision to adopt and use sets of complementary innovations. We define complementary innovations those innovations whose joint use generates super additive gains, i.e. the gain from the joint adoption is higher than the sum of the gains derived from the adoption of each innovation in isolation. From a theoretical perspective, we present a simple decision model, whereby the firm decides ‘whether’ and ‘how much’ to invest in each of the innovations under investigation based upon the expected profit gain from each possible combination of adoption and use. The model shows how the extent of complementarity among the innovations can affect the firm’s profit gains and therefore the likelihood that the firm will adopt these innovations jointly, rather than individually. From an empirical perspective, we focus on four sets of management practices, namely operating (OMP), monitoring (MMP), targets (TMP) and incentives (IMP) management practices. We show that these sets of practices, although to a different extent, are complementary to each other. Then, we construct a synthetic indicator of the depth of their use. The resulting intra-firm index is built to reflect not only the number of practices adopted but also the depth of their individual use and the extent of their complementarity. The empirical testing of the decision model is carried out using the evidence from the adoption behaviour of a sample of 1,238 UK establishments present in the 2004 Workplace Employment Relations Survey (WERS). Our empirical results show that the intra-firm profitability based model is a good model in that it can explain more of the variability of joint adoption than models based upon the variability of adoption and use of individual practices. We also investigate whether a number of firm specific and market characteristics by affecting the size of the gains (which the joint adoption of innovations can generate) may drive the intensity of use of the four innovations. We find that establishment size, whether foreign owned, whether exposed to an international market and the degree of homogeneity of the final product are important determinants of the intensity of the joint adoption of the four innovations. Most importantly, our results point out that the factors that the economics of innovation literature has been showing to affect the intensity of use of a technological innovation do also affect the intensity of use of sets of innovative management practices. However, they can explain only a small part of the diversity of their joint adoption use by the firms in the sample.

Moving from HRM to knowledge productivity:a study of whether and how organizations become learning organizations

Practitioners and academics are in broad agreement that, above all, organizations need to be able to learn, to innovate and to question existing ways of working. This thesis develops a model to take into account, firstly, what determines whether or not organizations endorse practices designed to facilitate learning. Secondly, the model evaluates the impact of such practices upon organizational outcomes, measured in terms of products and technological innovation. Researchers have noted that organizations that are committed to producing innovation show great resilience in dealing with adverse business conditions (e.g. Pavitt, 1991; Leonard Barton, 1998). In effect, such organizations bear many of the characteristics associated with the achievement of ‘learning organization’ status (Garvin, 1993; Pedler, Burgoyne & Boydell, 1999; Senge, 1990). Seven studies are presented to support this theoretical framework. The first empirical study explores the antecedents to effective learning. The three following studies present data to suggest that people management practices are highly significant in determining whether or not organizations are able to produce sustained innovation. The thesis goes on to explore the relationship between organizational-level job satisfaction, learning and innovation, and provides evidence to suggest that there is a strong, positive relationship between these variables. The final two chapters analyze learning and innovation within two similar manufacturing organizations. One manifests relatively low levels of innovation whilst the other is generally considered to be outstandingly innovative. I present the comparative framework for exploring the different approaches to learning manifested by the two organizations. The thesis concludes by assessing the extent to which the theoretical model presented in the second chapter is borne out by the findings of the study. Whilst this is a relatively new field of inquiry, findings reveal that organizations have a much stronger chance of producing sustained innovation where they manage people proactively where people process themselves to be satisfied at work. Few studies to date have presented empirical evidence to substantiate theoretical endorsements to engage in higher order learning, so this research makes an important contribution to existing literature in this field.

Enhancing employability in the "ME generation"

Purpose – The purpose of this paper is to place all of the contributions to this special issue into a theoretical framework and to highlight the role that the so-called “information age mindset” has in the facilitation of employability skills. Design/methodology/approach – The paper discusses the major themes of this special issue. Findings – Undergraduate students do see the importance of technological innovation in the classroom but they see the development of experiential or work-based skills to be more important. Practical implications – Future curriculum design should consider the expectations and attitudes of the modern day undergraduate student to ensure that potential employability is maximised. Originality/value – The findings are placed into the wider context of the emerging field of evolutionary educational psychology.

Envisioning innovation : the communication of technological change through graphic representation

Graphic depiction is an established method for academics to present concepts about theories of innovation. These expressions have been adopted by policy-makers, the media and businesses. However, there has been little research on the extent of their usage or effectiveness ex-academia. In addition, innovation theorists have ignored this area of study, despite the communication of information about innovation being acknowledged as a major determinant of success for corporate enterprise. The thesis explores some major themes in the theories of innovation and compares how graphics are used to represent them. The thesis examines the contribution of visual sociology and graphic theory to an investigation of a sample of graphics. The methodological focus is a modified content analysis. The following expressions are explored: check lists, matrices, maps and mapping in the management of innovation; models, flow charts, organisational charts and networks in the innovation process; and curves and cycles in the representation of performance and progress. The main conclusion is that academia is leading the way in usage as well as novelty. The graphic message is switching from prescription to description. The computerisation of graphics has created a major role for the information designer. It is recommended that use of the graphic representation of innovation should be increased in all domains, though it is conceded that its content and execution need to improve, too. Education of graphic 'producers', 'intermediaries' and 'consumers' will play a part in this, as will greater exploration of diversity, novelty and convention. Work has begun to tackle this and suggestions for future research are made.

Hardware gimmick or cultural innovation? Technological, cultural, and social foundations of the Japanese video game industry

This paper examines the role of creative resources in the emergence of the Japanese video game industry. We argue that creative resources nurtured by popular cartoons and animation sector, combined with technological knowledge accumulated in the consumer electronics industry, facilitated the emergence of successful video game industry in Japan. First we trace the development of the industry from its origin to the rise of platform developers and software publishers. Then, knowledge and creative foundations that influenced the developmental trajectory of this industry are analyzed, with links to consumer electronics and in regards to cartoons and animation industry.

Indigenous and foreign innovation efforts and drivers of technological upgrading:evidence from China

This paper explores the role of indigenous and foreign innovation efforts in technological upgrading in developing countries, taking into account sectoral specificities in technical change. Using a Chinese firm-level panel dataset covering 2001–05, the paper decomposes productivity growth into technical change and efficiency improvement and examines the impact of indigenous and foreign innovation efforts on these changes. Indigenous firms are found to be the leading force on the technological frontier in the low- and medium-technology industries, while foreign-invested firms enjoy a clear lead in the high-technology sector. Collective indigenous R&D activities at the industry level are found to be the major driver of technology upgrading of indigenous firms that push out the technology frontier. While foreign investment appears to contribute to static industry capabilities, R&D activities of foreign-invested firms have exerted a significant negative effect on the technical change of local firms over the sample period.

Indigenous and foreign innovation efforts and drivers of technological upgrading:evidence from China

This paper explores the drivers of technology upgrading in emerging economies using a recent Chinese firm-level panel dataset over the 2001-2005 period. It extends the Directed Technical Change theory by considering differences in technology intensities across industries within a country; examines the drivers of technical change, efficiency improvement and TFP growth in Chinese manufacturing firms; and explores the roles of indigenous innovations and foreign technology. It finds that FDI contributes to static industry capabilities by advanced technologies embedded in imported machineries, but not to dynamic technological capabilities of indigenous firms in developing countries. Collective indigenous R&D activities at industry level are the major driver of technology upgrading of indigenous firms that push up the technology frontier. Policy implications are discussed.

National system of innovation and technological learning:an integrated framework for understanding technological capability development in the Russian forestry sector

One of the issues in the innovation system literature is examination of technological learning strategies of laggard nations. Two distinct bodies of literature have contributed to our insight into forces driving learning and innovation, National Systems of Innovation (NSI) and technological learning literature. Although both literatures yield insights on catch-up strategies of 'latecomer' nations, the explanatory powers of each literature by itself is limited. In this paper, a possible way of linking the macro- and the micro-level approaches by incorporating enterprises as active learning entities into the learning and innovation system is proposed. The proposed model has been used to develop research hypotheses and indicate research directions and is relevant for investigating the learning strategies of firms in less technologically intensive industries outside East Asia.

From national innovation systems to national innovation capacity:internationalisation and technology transfer perspectives

The last decade or so has witnessed the emergence of the national innovation system (NIS) phenomenon. Since then, many scholars have investigated NIS and its implementation in different countries. However, there are very few investigations into the relationship between the NIS of a country and its national innovation capacity. This paper aims to make a contribution in this area by examining the link that currently exists between these two topics. Whilst examining this relationship, we also explore internationalisation and technology transfer, being cognate areas that have been investigated during the same period. This follows our assertion that the link between NIS and national innovation capacity is the mechanism of internationalisation and technology transfer. The NIS approach was introduced in the late 1980s (see Freeman, 1987; Dosi et al., 1988) and further elaborated later (see Lundvall, 1992; Nelson, 1993; Edquist, 1997). In essence, a country?s NIS is a historically grown subsystem of the entire national economy consisting of organisations and institutions which play a major role in the innovative activity in the country. In the NIS approach, interactions within organisations as well as the interplay between organisations and institutions are of central importance. The NIS approach has been used to reveal the structure of the innovation processes and the main actors involved in them in industrialised and emerging countries. Although the national focus remains strong, it has been accompanied by studies seeking to analyse the notion of systems of innovation at an international level and at a sub-national scale (Archibugi et al., 1999). Dosi in the edition of Archibugi et al. (1999) argues that the general background of the discussion of national systems is the observation of non-random distributions across countries of: corporate capabilities; organisational forms; strategies; and ultimately revealed performances, in terms of production efficiency and inputs productivities, rates of innovation, rates of adoption/diffusion of innovation themselves, dynamics of market shares on the world markets, growth of income and employment. They also mention that there are several approaches to NIS. Nelson (1993) focuses upon the specificities of national institutions and policies supporting directly or indirectly innovation, diffusion and skills accumulation. Patel and Pavitt (1991) have stressed the links between the national patterns of technological accumulation and the competencies and innovative strategies of a few major national companies. Amable et al (1997) and Soskice (1993) and Zysman (1994) focus on the specifics of national institutions including, for example, the forms of organization, financial and labour markets, training institutions, forms of state intervention in the economy etc. However, the most common reference is by Lundvall (1992) who argues that the focus on the national level is associated with the fact that national economies vary according to their production system and their institutional framework and these differences are in turn strengthened by different historical experiences, language and culture. On the other hand, the national innovation capability consists of abilities to create and carry new technological possibilities through to economic practice. The term covers a wide range of activities from capability to invent to capability to innovate and to capability to improve existing technology beyond the original design parameters (Kim, 1997). The term innovation is often associated by many with technological change at international frontiers. However, technological capability is not the same as innovation capability. Technological capability refers to assimilation, use, adaptation, and change to existing technologies. It also enables the creation of new technologies and development of new products and processes in response to changing economic environments. It denotes operational command over knowledge (Kim, 1997). It is manifested not merely by the knowledge possessed, but, more important, by the uses to which that knowledge can be put and by the proficiency with which it is applied in the activities of investment and production and in the creation of new knowledge (Westphal et al., 1985). Therefore, the analytical framework that is used in this paper is based on the way a country derives from its NIS a national innovation capacity. There are two perspectives that are identified on this way. These are internationalisation and technology transfer. Even though NIS is not directly related to national innovation capacity, to achieve national innovation capacity from NIS, the country should have the ability for technology transfer. Technology transfer is a link between these two phenomena. On the other hand, internationalisation can be either the input or the output of the relationship between NIS and national innovation capability. If a company is investing in a country because of its national innovation capacity, this can be regarded as an input to the relationship between NIS and national innovation capacity. If this company is investigating the national innovation capacity of a country then, for its internationalisation, the national innovation capacity should be important, which in turn means this company is active in innovation and innovation is also an important success factor. The interrelationship between the investment of the company and the NIS of the country (assuming that the country is competent and competitive in technology transfer) will generate and improve that country?s national innovation capacity. This is the output of internationalisation from the relationship between NIS and national innovation capacity. When companies are evaluating whether to internationalise, they investigate certain factors in the countries in which they are considering to invest. The ability to transfer technology is dependent on ability to adopt a new technology and also on the learning derived from this technology. If countries wish to attract innovation related investment they need to show their ability to have a NIS and also the capability to transfer technology. Without the technology transfer capability, the NIS is not functioning. Therefore, companies that internationalise will investigate the factors common to NIS, technology transfer, and their business needs. Through this paper we will demonstrate this link though its mechanisms. Our research will be through extensive literature review and identifying relevant aspects of previous research carried out by the authors. It will investigate certain factors of different countries that are successful in attracting innovation related foreign direct investment. Through these, we will point out the factors that are important for the link and mechanisms of NIS and national innovation capability.

Technological and organisational change in small- to medium-sized manufacturing companies:a learning organisation perspective

This paper examines the extent to which a learning organisation perspective is attainable in small- to medium-sized manufacturing companies. An audit tool is developed from the literature on organisational learning and recognised processes that lead towards becoming a learning organisation. The paper focuses on the application of the audit tool in three UK automotive component suppliers which are all experiencing pressures for change imposed by the major vehicle manufacturers. The main changes are concerned with tiering of the supply chain and substantial delegation of responsibilities to component suppliers including an increasing emphasis on innovation and continuous improvement. The companies presented in the paper are taken from a research project into the impact of changes in supply chain relationships on the operation of small- and medium-sized manufacturing firms in the West Midlands region of the UK. The ways in which the companies are responding to change are presented together with the results of a self-assessment using the developed audit tool. These results suggest that companies of this type tend to focus on change in those areas that involve least challenge to the established power and authority of management.

Investigating Turkey's national innovation and learning system

The national systems of innovation (NIS) approach focuses on the patterns and the determinants of innovation processes from the perspective of nation-states. This paper reports on continuing work on the application of an NIS model to the development of technological capability in Turkey. Initial assessment of the literature shows that there are a number of alternative conceptualisations of NIS. An attempt by the Government to identify a NIS for Turkey shows the main actors in the system but does not pay sufficient attention to the processes of interactions between agents within the system. An operational model should be capable of representing these processes and interactions and assessing the strengths and weaknesses of the NIS. For industrialising countries, it is also necessary to incorporate learning mechanisms into the model. Further, there are different levels of innovation and capability in different sectors which the national perspective may not reflect. This paper is arranged into three sections. The first briefly explains the basics of the national innovation and learning system. Although there is no single accepted definition of NIS, alternative definitions reviewed share some common characteristics. In the second section, an NIS model is applied to Turkey in order to identify the elements, which characterise the country’s NIS. This section explains knowledge flow and defines the relations between the actors within the system. The final section draws on the “from imitation to innovation” model apparently so successful in East Asia and assesses its applicability to Turkey. In assessing Turkey’s NIS, the focus is on the automotive and textile sectors.

The European Community and innovation policy : reorienting towards diffusion

This study aims to explore the position of diffusion oriented support mechanisms in European Community (EC) innovation policy. With the shift from the traditional linear model towards an integrative approach to innovation, the role of diffusion of technologies and knowledge, achieved greater weight. This shift in both the thinking of academic experts, and of national policy makers, induced EC policy makers to appeal for similar changes in Community innovation policy. From the mid-1980s, the Commission of the European Communities, the key actor in EC policy making, thought to move its innovation policy away from the traditional science push approach. This study shows that in the implementation of programmes for research, technology and innovation, the traditional linear model is still dominant. The core research and technological development programmes still operate from a science push concept of innovation, mainly due to their pre-competitive nature. The case of SPRINT illustrates that policy programmes with an integrated innovation perspective can be successful at Community level. However the programme operates in a relatively isolated position from overall research and technological development policy. The case of BRITE-EURAM illustrates the difficulties of collaborative research programmes, the bulk of EC support mechanisms, to move away from the traditional model. The study shows how conflicting policy objectives arising from the different policy networks that shape EC policy making, in combination with a lack of co-ordination in those policy domains, hinder the emergence of the integrated approach. Consequently EC diffusion policy, implemented from the perspective of the linear model, will have a sub-optimal impact on the competitiveness of European industries.

Business implications of manufacturing innovation : the experience of increasing automation in smaller to medium sized companies.

Despite the considerable potential of advanced manufacturing technologies (AMT) for improving the economic performance of many firms, a growing body of literature highlights many instances where realising this potential has proven to be a more difficult task than initially envisaged. Focussing upon the implementation of new manufacturing technologies in several smaller to medium sized enterprises (SME), the research examines the proposition that many of these problems can be attributed in part to inadequate consideration of the integrated nature of such technologies, where the effects of their implementation are not localised, but are felt throughout a business. The criteria for the economic evaluation of such technologies are seen as needing to reflect this, and the research develops an innovative methodology employing micro-computer based spreadsheets, to demonstrate how a series of financial models can be used to quantify the effects of new investments upon overall company performance. Case studies include: the development of a prototype machine based absorption costing system to assist in the evaluation of CNC machine tool purchases in a press making company; the economics and strategy of introducing a flexible manufacturing system for the production of ballscrews; and analysing the progressive introduction of computer based printing presses in a packaging and general print company. Complementary insights are also provided from discussion with the management of several other companies which have experienced technological change. The research was conducted as a collaborative CASE project in the Interdisciplinary Higher Degrees Scheme and was jointly funded by the SERC and Gaydon Technology Limited and later assisted by PE-Inbucon. The findings of the research shows that the introduction of new manufacturing technologies usually requires a fundamental rethink of the existing practices of a business. In particular, its implementation is seen as ideally needing to take place as part of a longer term business and manufacturing strategy, but that short term commercial pressures and limited resources often mean that firms experience difficulty in realising this. The use of a spreadsheet based methodology is shown to be of considerable assistance in evaluating new investments, and is seen as being the limit of sophistication that a smaller business is willing to employ. Several points for effective modelling practice are also given, together with an outline of the context in which a modelling approach is most applicable.

The value of innovation:the interaction of competition, R&D and IP

This paper analyses market valuations of UK companies using a new data set of their R&D and IP activities (1989–2002). In contrast to previous studies, the analysis is conducted at the sectoral-level, where the sectors are based on the technological classification originating from Pavitt [Pavitt, K., 1984. Sectoral patterns of technical change. Research Policy 13, 343–373]. The first main result is that the valuation of R&D varies substantially across these sectors. Another important result is that, on average, firms that receive only UK patents tend to have no significant market premium. In direct contrast, patenting through the European Patent Office does raise market value, as does the registration of trade marks in the UK for most sectors. To explore these variations the paper links competitive conditions with the market valuation of innovation. Using profit persistence as a measure of competitive pressure, we find that the sectors that are the most competitive have the lowest market valuation of R&D. Furthermore, within the most competitive sector (‘science based’ manufacturing), firms with larger market shares (an inverse indicator of competitive pressure) also have higher R&D valuations, as well as some positive return to UK patents. We conclude that this evidence supports Schumpeter by finding higher returns to innovation in less than fully competitive markets and contradicts Arrow [Arrow, K., 1962. Economic welfare and the allocation of resources for invention. In: Nelson, R. (Ed.), The Rate and Direction of Inventive Activity. Princeton University Press, Princeton], who argued that, with the existence of IP rights, competitive market structure provides higher incentives to innovate.

Supply chain innovation for competing in highly competitive markets:challenges and solutions

Rapid changes in technological development are forcing businesses to continuously innovate to improve their competitiveness, which is particularly evident in logistics and supply chain management (SCM), where innovation impacts both the strategic and operational levels. Supply Chain Innovation for Competing in Highly Dynamic Markets: Challenges and Solutions investigates the role of innovation in the management of supply chains of today. This book focuses on supply chain integration from both strategic and operational perspectives and the impact of information technology-related innovation in supply chain and logistics service industries. It also analyzes how environmental innovation affects logistical decisions throughout the supply chain and the strategies employed in managing logistics-related environmental impacts. Finally, the book explores theoretical and practical implications of innovation in the management of supply systems.