Development of a small-scale trigeneration plant based on a CI engine fuelled by neat non-edible plant oil

This study presents design and construction of a tri-generation system (thermal efficiency, 63%), powered by neat nonedible plant oils (jatropha, pongamia and jojoba oil or standard diesel fuel), besides studies on plant performance and economics. Proposed plant consumes fuel (3 l/h) and produce ice (40 kg/h) by means of an adsorption refrigerator powered from the engine waste jacket water heat. Potential savings in green house gas (GHG) emissions of trigeneration system in comparison to cogeneration (or single generation) has also been discussed.

An investigation of the prevalence and measurement of teams in organisations:the development and validation of the real team scale

This thesis begins with a review of the literature on team-based working in organisations, highlighting the variations in research findings, and the need for greater precision in our measurement of teams. It continues with an illustration of the nature and prevalence of real and pseudo team-based working, by presenting results from a large sample of secondary data from the UK National Health Service. Results demonstrate that ‘real teams’ have an important and significant impact on the reduction of many work-related safety outcomes. Based on both theoretical and methodological limitations of existing approaches, the thesis moves on to provide a clarification and extension of the ‘real team’ construct, demarcating this from other (pseudo-like) team typologies on a sliding scale, rather than a simple dichotomy. A conceptual model for defining real teams is presented, providing a theoretical basis for the development of a scale on which teams can be measured for varying extents of ‘realness’. A new twelve-item scale is developed and tested with three samples of data comprising 53 undergraduate teams, 52 postgraduate teams, and 63 public sector teams from a large UK organisation. Evidence for the content, construct and criterion-related validity of the real team scale is examined over seven separate validation studies. Theoretical, methodological and practical implications of the real team scale are then discussed.

Development and psychometric evaluation of a new team effectiveness scale for all types of community adult mental health teams:a mixed-methods approach

Defining 'effectiveness' in the context of community mental health teams (CMHTs) has become increasingly difficult under the current pattern of provision required in National Health Service mental health services in England. The aim of this study was to establish the characteristics of multi-professional team working effectiveness in adult CMHTs to develop a new measure of CMHT effectiveness. The study was conducted between May and November 2010 and comprised two stages. Stage 1 used a formative evaluative approach based on the Productivity Measurement and Enhancement System to develop the scale with multiple stakeholder groups over a series of qualitative workshops held in various locations across England. Stage 2 analysed responses from a cross-sectional survey of 1500 members in 135 CMHTs from 11 Mental Health Trusts in England to determine the scale's psychometric properties. Based on an analysis of its structural validity and reliability, the resultant 20-item scale demonstrated good psychometric properties and captured one overall latent factor of CMHT effectiveness comprising seven dimensions: improved service user well-being, creative problem-solving, continuous care, inter-team working, respect between professionals, engagement with carers and therapeutic relationships with service users. The scale will be of significant value to CMHTs and healthcare commissioners both nationally and internationally for monitoring, evaluating and improving team functioning in practice.

A quantitative approach for understanding small-scale human mesenchymal stem cell culture - implications for large-scale bioprocess development

Human mesenchymal stem cell (hMSC) therapies have the potential to revolutionise the healthcare industry and replicate the success of the therapeutic protein industry; however, for this to be achieved there is a need to apply key bioprocessing engineering principles and adopt a quantitative approach for large-scale reproducible hMSC bioprocess development. Here we provide a quantitative analysis of the changes in concentration of glucose, lactate and ammonium with time during hMSC monolayer culture over 4 passages, under 100% and 20% dissolved oxgen (dO2), where either a 100%, 50% or 0% growth medium exchange was performed after 72h in culture. Yield coefficients, specific growth rates (h-1) and doubling times (h) were calculated for all cases. The 100% dO2 flasks outperformed the 20% dO2 flasks with respect to cumulative cell number, with the latter consuming more glucose and producing more lactate and ammonium. Furthermore, the 100% and 50% medium exchange conditions resulted in similar cumulative cell numbers, whilst the 0% conditions were significantly lower. Cell immunophenotype and multipotency were not affected by the experimental culture conditions. This study demonstrates the importance of determining optimal culture conditions for hMSC expansion and highlights a potential cost savings from only making a 50% medium exchange, which may prove significant for large-scale bioprocessing. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Parental confidence in managing food allergy:development of the Food Allergy Self-Efficacy Scale for parents (FASE-P)

Background: Food allergy is often a life-long condition that requires constant vigilance in order to prevent accidental exposure and avoid potentially life-threatening symptoms. Parents’ confidence in managing their child’s food allergy may relate to the poor quality of life anxiety and worry reported by parents of food allergic children. Objective: The aim of the current study was to develop and validate the first scale to measure parental confidence (self-efficacy) in managing food allergy in their child. Methods: The Food Allergy Self-Efficacy Scale for Parents (FASE-P) was developed through interviews with 53 parents, consultation of the literature and experts in the area. The FASE-P was then completed by 434 parents of food allergic children from a general population sample in addition to the General Self-Efficacy Scale (GSES), the Food Allergy Quality of Life Parental Burden Scale (FAQL-PB), the General Health Questionnaire (GHQ12) and the Food Allergy Impact Measure (FAIM). A total of 250 parents completed the re-test of the FASE-P. Results: Factor and reliability analysis resulted in a 21 item scale with 5 sub-scales. The overall scale and sub-scales has good to excellent internal consistency (α’s of 0.63-0.89) and the scale is stable over time. There were low to moderate significant correlations with the GSES, FAIM and GHQ12 and strong correlations with the FAQL-PB, with better parental confidence relating to better general self-efficacy, better quality of life and better mental health in the parent. Poorer self-efficacy was related to egg and milk allergy; self-efficacy was not related to severity of allergy. Conclusions and clinical relevance: The FASE-P is a reliable and valid scale for use with parents from a general population. Its application within clinical settings could aid provision of advice and improve targeted interventions by identifying areas where parents have less confidence in managing their child’s food allergy.

Characterization of human mesenchymal stem cells from multiple donors and the implications for large scale bioprocess development

Cell-based therapies have the potential to contribute to global healthcare, whereby the use of living cells and tissues can be used as medicinal therapies. Despite this potential, many challenges remain before the full value of this emerging field can be realized. The characterization of input material for cell-based therapy bioprocesses from multiple donors is necessary to identify and understand the potential implications of input variation on process development. In this work, we have characterized bone marrow derived human mesenchymal stem cells (BM-hMSCs) from multiple donors and discussed the implications of the measurable input variation on the development of autologous and allogeneic cell-based therapy manufacturing processes. The range of cumulative population doublings across the five BM-hMSC lines over 30 days of culture was 5.93, with an 18.2% range in colony forming efficiency at the end of the culture process and a 55.1% difference in the production of interleukin-6 between these cell lines. It has been demonstrated that this variation results in a range in the process time between these donor hMSC lines for a hypothetical product of over 13 days, creating potential batch timing issues when manufacturing products from multiple patients. All BM-hMSC donor lines demonstrated conformity to the ISCT criteria but showed a difference in cell morphology. Metabolite analysis showed that hMSCs from the different donors have a range in glucose consumption of 26.98 pmol cell−1 day−1, Lactate production of 29.45 pmol cell−1 day−1 and ammonium production of 1.35 pmol cell−1 day−1, demonstrating the extent of donor variability throughout the expansion process. Measuring informative product attributes during process development will facilitate progress towards consistent manufacturing processes, a critical step in the translation cell-based therapies.

Glasgow antipsychotic side-effects scale for Clozapine - development and validation of a clozapine-specific side-effects scale

OBJECTIVE: The authors developed and validated a clozapine-specific side-effects scale capable of eliciting the subjectively unpleasant side-effects of clozapine. METHODS: Questions from the original Glasgow Antipsychotic Side-effects Scale (GASS) were compared to a list of the most commonly reported clozapine side-effects and those with a significant subjective burden were included in the GASS for Clozapine (GASS-C). The original authors of the GASS and a group of mental health professionals from the UK and Ireland were enlisted to comment on the questions in the GASS-C based on their clinical experience. 110 clozapine outpatients from two sites completed the GASS-C, the original GASS and a repeat GASS-C. Statistical analyses were performed using SPSS for Windows version 19. RESULTS: The GASS-C was shown to have construct validity, in that Spearman's correlation coefficient was 0.816 (p<0.001) with the original GASS, whilst Cohen's kappa coefficient was >0.77 (p<0.001) for one question and >0.81 (p<0.001) for remaining relevant questions. GASS-C was also shown to have strong test-retest reliability, in that Cronbach's alpha coefficient was >0.907 (p<0.001), whilst Cohen's kappa coefficient was >0.81 (p<0.001) for 12 questions and >0.61 (p<0.001) for the remaining four questions. CONCLUSION: The GASS-C is a valid and reliable clinical tool to enable a systematic assessment of the subjectively unpleasant side-effects of clozapine. Future research should focus on how the scale can be utilised as a clinical tool to improve real-world outcomes such as adherence to clozapine therapy and quality of life.

Empirical analysis of human capital development and economic growth in Europe

Recent discussion of the knowledge-based economy draws increasingly attention to the role that the creation and management of knowledge plays in economic development. Development of human capital, the principal mechanism for knowledge creation and management, becomes a central issue for policy-makers and practitioners at the regional, as well as national, level. Facing competition both within and across nations, regional policy-makers view human capital development as a key to strengthening the positions of their economies in the global market. Against this background, the aim of this study is to go some way towards answering the question of whether, and how, investment in education and vocational training at regional level provides these territorial units with comparative advantages. The study reviews literature in economics and economic geography on economic growth (Chapter 2). In growth model literature, human capital has gained increased recognition as a key production factor along with physical capital and labour. Although leaving technical progress as an exogenous factor, neoclassical Solow-Swan models have improved their estimates through the inclusion of human capital. In contrast, endogenous growth models place investment in research at centre stage in accounting for technical progress. As a result, they often focus upon research workers, who embody high-order human capital, as a key variable in their framework. An issue of discussion is how human capital facilitates economic growth: is it the level of its stock or its accumulation that influences the rate of growth? In addition, these economic models are criticised in economic geography literature for their failure to consider spatial aspects of economic development, and particularly for their lack of attention to tacit knowledge and urban environments that facilitate the exchange of such knowledge. Our empirical analysis of European regions (Chapter 3) shows that investment by individuals in human capital formation has distinct patterns. Those regions with a higher level of investment in tertiary education tend to have a larger concentration of information and communication technology (ICT) sectors (including provision of ICT services and manufacture of ICT devices and equipment) and research functions. Not surprisingly, regions with major metropolitan areas where higher education institutions are located show a high enrolment rate for tertiary education, suggesting a possible link to the demand from high-order corporate functions located there. Furthermore, the rate of human capital development (at the level of vocational type of upper secondary education) appears to have significant association with the level of entrepreneurship in emerging industries such as ICT-related services and ICT manufacturing, whereas such association is not found with traditional manufacturing industries. In general, a high level of investment by individuals in tertiary education is found in those regions that accommodate high-tech industries and high-order corporate functions such as research and development (R&D). These functions are supported through the urban infrastructure and public science base, facilitating exchange of tacit knowledge. They also enjoy a low unemployment rate. However, the existing stock of human and physical capital in those regions with a high level of urban infrastructure does not lead to a high rate of economic growth. Our empirical analysis demonstrates that the rate of economic growth is determined by the accumulation of human and physical capital, not by level of their existing stocks. We found no significant effects of scale that would favour those regions with a larger stock of human capital. The primary policy implication of our study is that, in order to facilitate economic growth, education and training need to supply human capital at a faster pace than simply replenishing it as it disappears from the labour market. Given the significant impact of high-order human capital (such as business R&D staff in our case study) as well as the increasingly fast pace of technological change that makes human capital obsolete, a concerted effort needs to be made to facilitate its continuous development.

How screening criteria change during brand development

Purpose - Despite the increasing sophistication of new product development (NPD) research, the reliance on traditional approaches to studying NPD has left several areas in need of further research. The authors propose addressing some of these gaps, especially the limited focus on consumer brands, evaluation criteria used across different project-review points in the NPD process, and the distinction between "kills", "successes", and "failures". Moreover, they propose investigating how screening criteria change across project-review points, using real-time NPD projects. Design/methodology/approach - A postal survey generated 172 usable questionnaires from a sample of European, North American, Far Eastern and Australian consumer packaged-goods firms, providing data on 314 new product projects covering different development and post-commercialization review points. Findings - The results confirm that acceptance-rejection criteria vary through the NPD process. However, financial criteria dominate across all the project-review points. Initial screening is coarse, focusing predominantly on financial criteria. Fit with organizational, product, brand, promotional, and market requirements dominate in the detailed screen and pre-development evaluation points. At pre-launch, decision-makers focus on product, brand, and promotional criteria. Commercial fit, production synergies, and reliability of the firm's market intelligence are significant discriminators in the post-launch review. Moreover, the importance of marketing and channel issues makes the criteria for screening brands different from those of industrial markets. Originality/value - The study, although largely descriptive and involves a relatively small sample of consumer goods firms, offers new insights into NPD project evaluation behavior. Future, larger-scale investigations covering a broader spectrum of consumer product sectors are needed to validate our results and to explain the reasons behind managers' decisions. © Emerald Group Publishing Limited.

Does the balanced scorecard make a difference to the strategy development process?

A great number of strategy tools are being taught in strategic management modules. These tools are available to managers for use in facilitating strategic decision-making and enhancing the strategy development process in their organisations. A number of studies have been published examining which are the most popular tools; however there is little empirical evidence on how their utilisation influences the strategy process. This paper is based on a large scale international survey on the strategy development process, and seeks to examine the impact of a particular strategy tool, the Balanced Scorecard, upon the strategy process. The Balanced Scorecard is one of the most popular strategy tools whose use has evolved since its introduction in the 1990’s. Recently, it has been suggested that as a strategy tool, Balanced Scorecard can influence all elements of the strategy process. The results of this study indicate that although there are significant differences in some elements of the strategy process between the organisations that have implemented the Balanced Scorecard and those that have not, the impact is not comprehensive.

The development of a multi-function computer-assisted instruction system using a hierarchical database structure as the lesson compendium.

Computer-Based Learning systems of one sort or another have been in existence for almost 20 years, but they have yet to achieve real credibility within Commerce, Industry or Education. A variety of reasons could be postulated for this, typically: - cost - complexity - inefficiency - inflexibility - tedium Obviously different systems deserve different levels and types of criticism, but it still remains true that Computer-Based Learning (CBL) is falling significantly short of its potential. Experience of a small, but highly successful CBL system within a large, geographically distributed industry (the National Coal Board) prompted an investigation into currently available packages, the original intention being to purchase the most suitable software and run it on existing computer hardware, alongside existing software systems. It became apparent that none of the available CBL packages were suitable, and a decision was taken to develop an in-house Computer-Assisted Instruction system according to the following criteria: - cheap to run; - easy to author course material; - easy to use; - requires no computing knowledge to use (as either an author or student) ; - efficient in the use of computer resources; - has a comprehensive range of facilities at all levels. This thesis describes the initial investigation, resultant observations and the design, development and implementation of the SCHOOL system. One of the principal characteristics c£ SCHOOL is that it uses a hierarchical database structure for the storage of course material - thereby providing inherently a great deal of the power, flexibility and efficiency originally required. Trials using the SCHOOL system on IBM 303X series equipment are also detailed, along with proposed and current development work on what is essentially an operational CBL system within a large-scale Industrial environment.

The impact of brand owner on consumers' brand perceptions : a development of Heider's Balance Theory

Studies have shown that the brand “owner” is very influential in positioning the brand and when the brand “owner” ceases his or her active role the brand will be perceived differently by the consumers. Balance Theory (HBT), a cognitive psychological theory, studies the triadic relationships between two persons and an entity and predicts that when a person’s original perception of the relationship is disturbed, the person restructures to a new balanced perception. Consequently, this research was undertaken to: conceptualize the brand owner’s impact on consumer’s brand perception; test the applicability of both the static and dynamic predictions of the Heider’s Balance Theory in brand owner-consumer-brand relation (OCB); construct and test a model of brand owner-consumer-brand relation; and examine if personality has an influence on OCB. A discovery-oriented approach was taken to understand the selected market segment, the ready-to-wear and diffusion lines of international designer labels. Chinese Brand Personality Scale, fashion proneness and hedonic and utilitarian shopping scales were developed, and validated. 51 customers were surveyed. Both traditional and extended methods used in the Balance Theory were employed in this study. Responses to liked brand have been used to test and develop the model, while those for disliked brand were used for test and confirmation. A “what if’ experimental approach was employed to test the applicability of dynamic HBT theory in OCB Model. The hypothesized OCB Model has been tested and validated. Consumers have been found to have separate views on the brand and the brand owner; and their responses to contrasting ethical and non-ethical news of the brand owner are different. Personality has been found to have an influence and two personality adapted models have been tested and validated. The actual results go beyond the prediction of the Balance Theory. Dominant triple positive balance mode, dominant negative balance mode, and mode of extreme antipathy have been found. It has been found that not all balanced modes are good for the brand. Contrary to Heider’s findings, simply liking may not necessarily lead to unit relation in the OCB Model.

The development of a testing procedure for dry friction brakes

A description of the background to testing friction materials for automotive brakes explains the need for a rapid, inexpensive means of assessing their behaviour in a way which is both accurate and meaningful. Various methods of controlling inertia dynamometers to simulate road vehicles are rejected in favour of programming by means of a commercially available XY plotter. Investigation of brake service conditions is used to set up test schedules, and a dynamometer programming unit built to enable service conditions on vehicles to be simulated on a full scale dynamometer. A technique is developed by which accelerated testing can be achieved without operating under overload conditions, saving time and cost without sacrificing validity. The development of programming by XY plotter is described, with a method of operating one XY plotter to programme the machine, monitor its own behaviour, and plot its own results in logical sequence. Commissioning trials are described and the generation of reproducible results in frictional behaviour and material durability is discussed. Teclmiques are developed to cross check the operation of the machine in retrospect, and retrospectively correct results in the event of malfunctions. Sensitivity errors in the measuring circuits are displayed between calibrations, whilst leaving the recorded results almost unaffected by error. Typical results of brake lining tests are used to demonstrate the range of performance parameters which can be studied by use of the machine. Successful test investigations completed on the machine are reported, including comments on behaviour of cast iron drums and discs. The machine shows that materials can repeat their complex friction/ temperature/speed/pressure relationships at a reproducibility of the order of +-0.003u and +~ 0.0002 in. thickness loss during wear tests. Discussion of practical and academic implications completes the report with recommendations for further work in both fields.