Environmental quality in residential areas : a social survey approach to improvement priorities

The research is concerned with the measurement of residents' evaluations of the environmental quality of residential areas. The research reflects the increased attention being given to residents' values in planning decisions affecting the residential environment. The work was undertaken in co-operation with a local authority which was in the process of revising its housing strategy, and in particular the priorities for improvement action. The study critically examines the existing evidence on environmental values and their relationship to the environment and points to a number of methodological and conceptual deficiencies. The research strategy developed on the basis of the research review was constrained by the need to keep any survey methods simple so that they could easily be repeated, when necessary, by the sponsoring authority. A basic perception model was assumed, and a social survey carried out to measure residents' responses to different environmental conditions. The data was only assumed to have ordinal properties, necessitating the extensive use of non-parametric statistics. Residents' expressions of satisfaction with the component elements of the environment (ranging from convenience to upkeep and privacy) were successfully related to 'objective' measures of the environment. However the survey evidence did not justify the use of the 'objective' variables as environmental standards. A method of using the social survey data directly as an aid to decision-making is discussed. Alternative models of the derivation of overall satisfaction with the environment are tested, and the values implied by the additive model compared with residents' preferences as measured directly in the survey. Residents' overall satisfactions with the residential environment were most closely related to their satisfactions with the "Appearance" and the "Reputation" of their areas. By contrast the most important directly measured preference was "Friendliness of area". The differences point to the need to define concepts used in social research clearly in operational terms, and to take care in the use of values 'measured' by different methods.

Uses of frontier efficiency methodologies and multi-criteria decision making for performance measurement in the energy sector

Guest editorial Ali Emrouznejad is a Senior Lecturer at the Aston Business School in Birmingham, UK. His areas of research interest include performance measurement and management, efficiency and productivity analysis as well as data mining. He has published widely in various international journals. He is an Associate Editor of IMA Journal of Management Mathematics and Guest Editor to several special issues of journals including Journal of Operational Research Society, Annals of Operations Research, Journal of Medical Systems, and International Journal of Energy Management Sector. He is in the editorial board of several international journals and co-founder of Performance Improvement Management Software. William Ho is a Senior Lecturer at the Aston University Business School. Before joining Aston in 2005, he had worked as a Research Associate in the Department of Industrial and Systems Engineering at the Hong Kong Polytechnic University. His research interests include supply chain management, production and operations management, and operations research. He has published extensively in various international journals like Computers & Operations Research, Engineering Applications of Artificial Intelligence, European Journal of Operational Research, Expert Systems with Applications, International Journal of Production Economics, International Journal of Production Research, Supply Chain Management: An International Journal, and so on. His first authored book was published in 2006. He is an Editorial Board member of the International Journal of Advanced Manufacturing Technology and an Associate Editor of the OR Insight Journal. Currently, he is a Scholar of the Advanced Institute of Management Research. Uses of frontier efficiency methodologies and multi-criteria decision making for performance measurement in the energy sector This special issue aims to focus on holistic, applied research on performance measurement in energy sector management and for publication of relevant applied research to bridge the gap between industry and academia. After a rigorous refereeing process, seven papers were included in this special issue. The volume opens with five data envelopment analysis (DEA)-based papers. Wu et al. apply the DEA-based Malmquist index to evaluate the changes in relative efficiency and the total factor productivity of coal-fired electricity generation of 30 Chinese administrative regions from 1999 to 2007. Factors considered in the model include fuel consumption, labor, capital, sulphur dioxide emissions, and electricity generated. The authors reveal that the east provinces were relatively and technically more efficient, whereas the west provinces had the highest growth rate in the period studied. Ioannis E. Tsolas applies the DEA approach to assess the performance of Greek fossil fuel-fired power stations taking undesirable outputs into consideration, such as carbon dioxide and sulphur dioxide emissions. In addition, the bootstrapping approach is deployed to address the uncertainty surrounding DEA point estimates, and provide bias-corrected estimations and confidence intervals for the point estimates. The author revealed from the sample that the non-lignite-fired stations are on an average more efficient than the lignite-fired stations. Maethee Mekaroonreung and Andrew L. Johnson compare the relative performance of three DEA-based measures, which estimate production frontiers and evaluate the relative efficiency of 113 US petroleum refineries while considering undesirable outputs. Three inputs (capital, energy consumption, and crude oil consumption), two desirable outputs (gasoline and distillate generation), and an undesirable output (toxic release) are considered in the DEA models. The authors discover that refineries in the Rocky Mountain region performed the best, and about 60 percent of oil refineries in the sample could improve their efficiencies further. H. Omrani, A. Azadeh, S. F. Ghaderi, and S. Abdollahzadeh presented an integrated approach, combining DEA, corrected ordinary least squares (COLS), and principal component analysis (PCA) methods, to calculate the relative efficiency scores of 26 Iranian electricity distribution units from 2003 to 2006. Specifically, both DEA and COLS are used to check three internal consistency conditions, whereas PCA is used to verify and validate the final ranking results of either DEA (consistency) or DEA-COLS (non-consistency). Three inputs (network length, transformer capacity, and number of employees) and two outputs (number of customers and total electricity sales) are considered in the model. Virendra Ajodhia applied three DEA-based models to evaluate the relative performance of 20 electricity distribution firms from the UK and the Netherlands. The first model is a traditional DEA model for analyzing cost-only efficiency. The second model includes (inverse) quality by modelling total customer minutes lost as an input data. The third model is based on the idea of using total social costs, including the firm’s private costs and the interruption costs incurred by consumers, as an input. Both energy-delivered and number of consumers are treated as the outputs in the models. After five DEA papers, Stelios Grafakos, Alexandros Flamos, Vlasis Oikonomou, and D. Zevgolis presented a multiple criteria analysis weighting approach to evaluate the energy and climate policy. The proposed approach is akin to the analytic hierarchy process, which consists of pairwise comparisons, consistency verification, and criteria prioritization. In the approach, stakeholders and experts in the energy policy field are incorporated in the evaluation process by providing an interactive mean with verbal, numerical, and visual representation of their preferences. A total of 14 evaluation criteria were considered and classified into four objectives, such as climate change mitigation, energy effectiveness, socioeconomic, and competitiveness and technology. Finally, Borge Hess applied the stochastic frontier analysis approach to analyze the impact of various business strategies, including acquisition, holding structures, and joint ventures, on a firm’s efficiency within a sample of 47 natural gas transmission pipelines in the USA from 1996 to 2005. The author finds that there were no significant changes in the firm’s efficiency by an acquisition, and there is a weak evidence for efficiency improvements caused by the new shareholder. Besides, the author discovers that parent companies appear not to influence a subsidiary’s efficiency positively. In addition, the analysis shows a negative impact of a joint venture on technical efficiency of the pipeline company. To conclude, we are grateful to all the authors for their contribution, and all the reviewers for their constructive comments, which made this special issue possible. We hope that this issue would contribute significantly to performance improvement of the energy sector.

Process improvement and quality management systems in the financial services industry:the case for the OPEX quality management system and framework

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

A survey of continuous improvement practices in the United Kingdom and Mexico

With the advent of globalisation companies all around the world must improve their performance in order to survive. The threats are coming from everywhere, and in different ways, such as low cost products, high quality products, new technologies, and new products. Different companies in different countries are using various techniques and using quality criteria items to strive for excellence. Continuous improvement techniques are used to enable companies to improve their operations. Therefore, companies are using techniques such as TQM, Kaizen, Six-Sigma, Lean Manufacturing, and quality award criteria items such as Customer Focus, Human Resources, Information & Analysis, and Process Management. The purpose of this paper is to compare the use of these techniques and criteria items in two countries, Mexico and the United Kingdom, which differ in culture and industrial structure. In terms of the use of continuous improvement tools and techniques, Mexico formally started to deal with continuous improvement by creating its National Quality Award soon after the Americans began the Malcolm Baldrige National Quality Award. The United Kingdom formally started by using the European Quality Award (EQA), modified and renamed as the EFQM Excellence Model. The methodology used in this study was to undertake a literature review of the subject matter and to study some general applications around the world. A questionnaire survey was then designed and a survey undertaken based on the same scale, about the same sample size, and the about the same industrial sector within the two countries. The survey presents a brief definition of each of the constructs to facilitate understanding of the questions. The analysis of the data was then conducted with the assistance of a statistical software package. The survey results indicate both similarities and differences in the strengths and weaknesses of the companies in the two countries. One outcome of the analysis is that it enables the companies to use the results to benchmark themselves and thus act to reinforce their strengths and to reduce their weaknesses.

Improving performance? The adoption and implementation of quality systems in U.K. nonprofits

There are increasing and multiple pressures on nonprofit organizations to demonstrate excellence in performance. Although there is a growing literature on the various approaches to performance improvement taken by nonprofits, little is known about the processes involved in the adoption and implementation of specific approaches. This article is about the adoption and use of one approach to performance improvement, quality systems, in the U.K. nonprofit sector. We report findings about factors that encourage nonprofits to adopt quality systems. We also analyze the distinctive challenges of implementing quality approaches in a nonprofit sector context and suggest critical success factors. The article concludes with a discussion of the organizational and policy implications of applying the management concepts of quality and performance to the nonprofit sector.

The impact of leadership and quality climate on hospital performance

Objective. To explore the relationship between leadership effectiveness and health-care trust performance, taking into account external quality measures and the number of patient complaints; also, to examine the role of care quality climate as a mediator. Design. We developed scales for rating leadership effectiveness and care quality climate. We then drew upon UK national indices of health-care trust performance—Commission for Health Improvement star ratings, Clinical Governance Review ratings and the number of patient complaints per thousand. We conducted statistical analysis to examine any significant relationships between predictor and outcome variables. Setting. The study is based on 86 hospital trusts run by the National Health Service (NHS) in the UK. The data collection is part of an annual staff survey commissioned by the NHS to explore the quality of working life. Participants. A total of 17 949 employees were randomly surveyed (41% of the total sample). Results. Leadership effectiveness is associated with higher Clinical Governance Review ratings and Commission for Health Improvement star ratings for our sample (ß = 0.42, P < 0.05; ß = 0.37, P < 0.05, respectively), and lower patient complaints (ß = –0.57, P < 0.05). In addition, 98% of the relationship between leadership and patient complaints is explained by care quality climate. Conclusions. Results offer insight into how non-clinical leadership may foster performance outcomes for health-care organizations. A frequently neglected area—patient complaints—may be a valid measure to consider when assessing leadership and quality in a health-care context.

Evaluating service quality and customer satisfaction evaluation in an emerging markets

Developing economies offer tremendous potential for future growth and organizations appreciating these consumers’ requirements stand to reap considerable returns. However, compared with more developed economies published consumer studies are few. In particular, there is a dearth of service quality research and hardly any from Africa. Furthermore, the little available research tends to apply Western methodologies, which may not be entirely appropriate. This research investigates East African consumer perceptions of retail banking using an approach that takes account of the research context. Qualitative research was undertaken to define the relevant service attributes. Performance along these was then investigated through a survey with over 2000 respondents. Principal component analysis identifies 13 core service dimensions and multinomial logistic regression reveals which are the key drivers of customer satisfaction. Comparison of the results with studies from other regions confirms that established standardized research instruments are likely to miss or under-represent service attributes important in developing countries.

Improvement of bio-oil stability in wood pyrolysis process

Pyrolysis is one of several thermochemical technologies that convert solid biomass into more useful and valuable bio-fuels. Pyrolysis is thermal degradation in the complete or partial absence of oxygen. Under carefully controlled conditions, solid biomass can be converted to a liquid known as bie-oil in 75% yield on dry feed. Bio-oil can be used as a fuel but has the drawback of having a high level of oxygen due to the presence of a complex mixture of molecular fragments of cellulose, hemicellulose and lignin polymers. Also, bio-oil has a number of problems in use including high initial viscosity, instability resulting in increased viscosity or phase separation and high solids content. Much effort has been spent on upgrading bio-oil into a more usable liquid fuel, either by modifying the liquid or by major chemical and catalytic conversion to hydrocarbons. The overall primary objective was to improve oil stability by exploring different ways. The first was to detennine the effect of feed moisture content on bio-oil stability. The second method was to try to improve bio-oil stability by partially oxygenated pyrolysis. The third one was to improve stability by co-pyrolysis with methanol. The project was carried out on an existing laboratory pyrolysis reactor system, which works well with this project without redesign or modification too much. During the finishing stages of this project, it was found that the temperature of the condenser in the product collection system had a marked impact on pyrolysis liquid stability. This was discussed in this work and further recommendation given. The quantity of water coming from the feedstock and the pyrolysis reaction is important to liquid stability. In the present work the feedstock moisture content was varied and pyrolysis experiments were carried out over a range of temperatures. The quality of the bio-oil produced was measured as water content, initial viscosity and stability. The result showed that moderate (7.3-12.8 % moisture) feedstock moisture led to more stable bio-oil. One of drawbacks of bio-oil was its instability due to containing unstable oxygenated chemicals. Catalytic hydrotreatment of the oil and zeolite cracking of pyrolysis vapour were discllssed by many researchers, the processes were intended to eliminate oxygen in the bio-oil. In this work an alternative way oxygenated pyrolysis was introduced in order to reduce oil instability, which was intended to oxidise unstable oxygenated chemicals in the bio-oil. The results showed that liquid stability was improved by oxygen addition during the pyrolysis of beech wood at an optimum air factor of about 0.09-0.15. Methanol as a postproduction additive to bio-oil has been studied by many researchers and the most effective result came from adding methanol to oil just after production. Co-pyrolysis of spruce wood with methanol was undertaken in the present work and it was found that methanol improved liquid stability as a co-pyrolysis solvent but was no more effective than when used as a postproduction additive.

Internal service quality and its impact on external service quality:a study of the role of internal customer types and the dimensions which are used to assess internal suppliers within an organisation and how this affects external service quality

This research explores the role of internal customers in the delivery of external service quality. It will consider any potentially different internal customer types that may exist within the organisation. Additionally, it will explore any potential differences in the dimensions that are used to measure service quality internally and externally. If there are different internal customer types then there may be different dimensions which are used to measure service quality between these types and this will be considered also. The approach adopted given the depth and breadth of understanding required, was an action research case based approach. The research objectives were:(i) To determine the dimensions of internal service quality between internal customer supplier cells. (ii) To determine what variation, if any, there is in the dimension sets between internal customer supplier cells. (iii) To determine any ranking in the dimensions that could exist by internal customer supplier cell type. (iv) To investigate the impact of internal service quality on external service quality over time. The research findings were: (i) The majority of the dimensions used in measuring external service quality were also used internally. There were additions of new dimensions however and some dimensions which were used externally, for internal use, had to be redefined. (ii) Variation in dimension sets were revealed during the research. Four different dimension sets were identified and these were matched with four different types of internal service interaction. (iii) Differences in the ranking of dimensions within each dimension set for each internal customer supplier cell type were confirmed. (iv) Internal service quality was seen to influence external service quality but at a cellular level rather than company level. At the company level, the average internal service quality at the start and finish of the research showed no improvement but external service quality had improved. Further investigation at the cellular level showed that improvements in internal service quality had occurred. Those improvements were found to be with the cells that were closest to the customer.The research implications were found to be: (i) some cells may not be necessary in the delivery of external service quality. (ii) The immediacy of the cell to the external customer and number of interactions into and out of that cell has the greatest effect on external customer satisfaction. (iii) Internal service quality may be driven by the customer affecting those cells at the front end of the business first. This then cascades back to those cells which are less immediate until ultimately the whole organisation shows improvements in internal service quality.

Developing and evaluating a methodology for business process improvement

Purpose – There appears to be an ever-insatiable demand from markets for organisations to improve their products and services. To meet this, there is a need to provide business process improvement (BPI) methodologies that are holistic, structured and procedural. Therefore, this paper describes research that has formed and tested a generic and practical methodology termed model-based and integrated process improvement (MIPI) to support the implementation of BPI; and to validate its effectiveness in organisations. This methodology has been created as an aid for practitioners within organisations. Design/methodology/approach – The research objectives were achieved by: reviewing and analysing current methodologies, and selecting a few frameworks against key performance indicators. Using a refined Delphi approach and semi-structured interview with the “experts” in the field. Intervention, case study and process research approach to evaluating a methodology. Findings – The BPI methodology was successfully formed and applied by the researcher and directly by the companies involved against the criteria of feasibility, usability and usefulness. Research limitations/implications – The paper has demonstrated a new knowledge on how to systematically assess a BPI methodology in practice. Practical implications – Model-based and integrated process improvement methodology (MIPI) methodology offers the practitioner (experienced and novice) a set of step-by-step aids necessary to make informed, consistent and efficient changes to business processes. Originality/value – The novelty of this research work is the creation of a holistic workbook-based methodology with relevant tools and techniques. It extends the capabilities of existing methodologies.

An integrated view of data quality in earth observation

Data quality is a difficult notion to define precisely, and different communities have different views and understandings of the subject. This causes confusion, a lack of harmonization of data across communities and omission of vital quality information. For some existing data infrastructures, data quality standards cannot address the problem adequately and cannot full all user needs or cover all concepts of data quality. In this paper we discuss some philosophical issues on data quality. We identify actual user needs on data quality, review existing standards and specification on data quality, and propose an integrated model for data quality in the eld of Earth observation. We also propose a practical mechanism for applying the integrated quality information model to large number of datasets through metadata inheritance. While our data quality management approach is in the domain of Earth observation, we believe the ideas and methodologies for data quality management can be applied to wider domains and disciplines to facilitate quality-enabled scientific research.

Mitigating the obsolescence of quality specifications models in service-based systems

Requirements-aware systems address the need to reason about uncertainty at runtime to support adaptation decisions, by representing quality of services (QoS) requirements for service-based systems (SBS) with precise values in run-time queryable model specification. However, current approaches do not support updating of the specification to reflect changes in the service market, like newly available services or improved QoS of existing ones. Thus, even if the specification models reflect design-time acceptable requirements they may become obsolete and miss opportunities for system improvement by self-adaptation. This articles proposes to distinguish "abstract" and "concrete" specification models: the former consists of linguistic variables (e.g. "fast") agreed upon at design time, and the latter consists of precise numeric values (e.g. "2ms") that are dynamically calculated at run-time, thus incorporating up-to-date QoS information. If and when freshly calculated concrete specifications are not satisfied anymore by the current service configuration, an adaptation is triggered. The approach was validated using four simulated SBS that use services from a previously published, real-world dataset; in all cases, the system was able to detect unsatisfied requirements at run-time and trigger suitable adaptations. Ongoing work focuses on policies to determine recalculation of specifications. This approach will allow engineers to build SBS that can be protected against market-caused obsolescence of their requirements specifications. © 2012 IEEE.

A study into the effectiveness of quality management training:a focus on tools and critical success factors

Purpose – The purpose of this paper is to investigate the effectiveness of quality management training by reviewing commonly used critical success factors and tools rather than the overall methodological approach. Design/methodology/approach – The methodology used a web-based questionnaire. It consisted of 238 questions covering 77 tools and 30 critical success factors selected from leading academic and practitioner sources. The survey had 79 usable responses and the data were analysed using relevant statistical quality management tools. The results were validated in a series of structured workshops with quality management experts. Findings – Findings show that in general most of the critical success factor statements for quality management are agreed with, although not all are implemented well. The findings also show that many quality tools are not known or understood well; and that training has an important role in raising their awareness and making sure they are used correctly. Research limitations/implications – Generalisations are limited by the UK-centric nature of the sample. Practical implications – The practical implications are discussed for organisations implementing quality management initiatives, training organisations revising their quality management syllabi and academic institutions teaching quality management. Originality/value – Most recent surveys have been aimed at methodological levels (i.e. “lean”, “Six Sigma”, “total quality management” etc.); this research proposes that this has limited value as many of the tools and critical success factors are common to most of the methodologies. Therefore, quite uniquely, this research focuses on the tools and critical success factors. Additionally, other recent comparable surveys have been less comprehensive and not focused on training issues.

Myopia control with orthokeratology contact lenses in Spain:a comparison of vision-related quality-of-life measures between orthokeratology contact lenses and single-vision spectacles

Purpose: To compare vision-related quality-of-life measures between children wearing orthokeratology (OK) contact lenses and distance single-vision (SV) spectacles. Methods: Subjects 6 to 12 years of age and with myopia of -0.75 to -4.00 diopters and astigmatism less than or equal to 1.00 diopters were prospectively assigned OK contact lens or SV spectacle correction. A pediatric refractive error profile questionnaire was administered at 12- and 24-month intervals to evaluate children's perceptions in terms of overall vision, near vision, far distance vision, symptoms, appearance, satisfaction, activities, academic performance, handling, and peer perceptions. The mean score of all items was calculated as the overall score. Additionally, parents/guardians were asked to rate their child's mode of visual correction and their intention to continue treatment after study completion. Results: Thirty-one children were fitted with OK contact lenses and 30 with SV spectacles. Children wearing OK contact lenses rated overall vision, far distance vision, symptoms, appearance, satisfaction, activities, academic performance, handling, peer perceptions, and the overall score significantly better than children wearing SV spectacles (all P<0.05). Near vision and handling were, respectively, rated better (P<0.001) and similar (P=0.44) for SV spectacles in comparison to OK contact lenses. No significant differences were found between 12 and 24 months for any of the subjective ratings assessed (all P>0.05). Parents/guardians of children wearing OK contact lenses rated visual correction method and intention to continue treatment higher than parents of children wearing SV spectacles (P=0.01). Conclusion: The results indicate that the significant improvement in vision-related quality of life and acceptability with OK contact lenses is an incentive to engage in its use for the control of myopia in children.

Advanced techniques for the improvement of optical transmission systems

This thesis presents the experimental investigation into two novel techniques which can be incorporated into current optical systems. These techniques have the capability to improve the performance of transmission and the recovery of the transmitted signal at the receiver. The experimental objectives are described and the results for each technique are presented in two sections: The first experimental section is on work related to Ultra-long Raman Fibre lasers (ULRFLs). The fibre lasers have become an important research topic in recent years due to the significant improvement they give over lumped Raman amplification and their potential use in the development of system with large bandwidths and very low losses. The experiments involved the use of ASK and DPSK modulation types over a distance of 240km and DPSK over a distance of 320km. These results are compared to the current state of-the-art and against other types of ultra-long transmission amplification techniques. The second technique investigated involves asymmetrical, or offset, filtering. This technique is important because it deals with the strong filtering regimes that are a part of optical systems and networks in modern high-speed communications. It allows the improvement of the received signal by offsetting the central frequency of a filter after the output of a Delay Line Interferometer (DLI), which induces significant improvement in BER and/or Qvalues at the receiver and therefore an increase in signal quality. The experimental results are then concluded against the objectives of the experimental work and potential future work discussed.