Ecological studies on:(a) the use of colonisation samplers in relation to biological surveillance of river water quality (b) the requirements of freshwater gastropoda

Some of the factors affecting colonisation of a colonisation sampler, the Standard Aufwuchs Unit (S. Auf. U.) were investigated, namely immersion period, whether anchored on the bottom or suspended, and the influence of riffles. It was concluded that a four-week immersion period was best. S. Auf. U. anchored on the bottom collected both more taxa and individuals than suspended ones. Fewer taxa but more individuals colonised S. Auf. U. in the potamon zone compared to the rhithron zone with a consequent reduction in the values of pollution indexes and diversity. It was concluded that a completely different scoring system was necessary for lowland rivers. Macroinvertebrates colonising S. Auf. U. in simulated streams, lowland rivers and the R. Churnet reflected water quality. A variety of pollution and diversity indexes were applied to results from lowland river sites. Instead of these, it was recommended that an abbreviated species - relative abundance list be used to summarise biological data for use in lowland river surveillance. An intensive study of gastropod populations was made in simulated streams. Lynnaea peregra increased in abundance whereas Potamopyrgas jenkinsi decreased with increasing sewage effluent concentration. No clear-cut differences in reproduction were observed. The presence/absence of eight gastropod taxa was compared with concentrations of various pollutants in lowland rivers. On the basis of all field work it appeared that ammonia, nitrite, copper and zinc were the toxicants most likely to be detrimental to gastropods and that P. jenkinsi and Theodoxus fluviatilis were the least tolerant taxa. 96h acute toxicity tests of P. jenkinsi using ammonia and copper were carried out in a flow-through system after a variety of static range finding tests. P. jenkinsi was intolerant to both toxicants compared to reports on other taxa and the results suggested that these toxicants would affect distribution of this species in the field.

Factors affecting the growth of Cladophora in relation to river pollution

Nuisance growths of Cladophora have been associated with eutrophication. A review of the literature, however, reveals a scarcity of relevant experimental growth studies. Sampling experimental streams reveals that the addition of sewage effluent to good quality water alters the flora from that dominated by Potamogetan crispus to one dominated by CLadophora. Spatial and temporal differences in biomass of taxa present are discussed in the context of accompanying physicochemical data. In laboratory batch culture, growth of unialgal C. glomerata was accompanied by elevation of medium pH - considered largely responsible for the poor growth in such culture. However, appropriate experimental conditions and indices of growth were selected and the effects of various herbicides assessed. Diquat and terbutryne were shown to possess algicidal activity towards Cladophora. A closed continuous culture apparatus was developed: growth proceeded through lag, logarithmic and linear phases. Inoculum size and medium flow rate had significant effects on growth, and were standardized. In continuous culture, specific growth rate increased linearly with increased duration of light per day, up to 24 hours, and increased light intensity, up to 6000 lux - the highest intensity tested. Comparison of field and laboratory results suggests that ammonia toxicity is attributable to the undissociated form. In the laboratory, 185 µg/1 undissociated ammoniacal nitrogen reduced specific growth rate to 50% of that at 10 µg/1 undissociated ammcniacal nitrogen. 0.077-1.057 mg/1 NO2-N had no significant effect on growth. 7.2-15.2 mg/1 NO3-N had no significant effect on specific growth rate. Neither was any nitrate/phosphate interaction significant. At 4.9 mg/1 PO4-1, specific growth rate was only 48% of that at 1.9 g/1 P04-P. The critical medium PO4-P concentration was <0.1 mg/i. Specific growth rate was reduced to 50% of that in natural water by 0.036 mgCu/l, 0.070 mgzn/1 and 1.03 mgPb/l. Metal uptake was evaluated.

Quality improvement in professional local government services : a longitudinal study

This sustained longitudinal study, carried out in a single local authority, investigates the implementation of a Total Quality Management (TQM) philosophy in professional local government services. At the start of this research, a large majority of what was written about TQM was polemical and based on limited empirical evidence. This thesis seeks to provide a significant and important piece of work, making a considerable contribution to the current state of knowledge in this area. Teams from four professional services within a single local authority participated in this research, providing the main evidence on how the quality management agenda in a local authority can be successfully implemented. To supplement this rich source of data, various other sources and methods of data collection have been used: 1) Interviews were carried out with senior managers from within the authority; 2) Customer focus groups and questionnaires were used; 3) Interviews were carried out with other organisations, all of which were proponents of a TQM philosophy. A number of tools have been developed to assist in gathering data: 1) The CSFs (critical success factors) benchmarking tool; 2) Five Stages of Quality Improvement Model. A Best Practice Quality Improvement Model, arising from an analysis of the literature and the researcher's own experience is proposed and tested. From the results a number of significant conclusions have been drawn relating to: 1) Triggers for change; 2) Resistance of local government professionals to change 3) Critical success factors and barriers to quality improvement in professional local government services; 4) The problems associated with participant observation and other methodological issues used.

Export memory: a preliminary investigation of its quality, its use, and its link to export performance

Exporting is one of the main ways in which organizations internationalize. With the more turbulent, heterogeneous, sophisticated and less familiar export environment, the organizational learning ability of the exporting organization may become its only source of sustainable competitive advantage. However, achieving a competitive level of learning is not easy. Companies must be able to find ways to improve their learning capability by enhancing the different aspects of the learning process. One of these is export memory. Building from an export information processing framework this research work particularly focuses on the quality of export memory, its determinants, its subsequent use in decision-making, and its ultimate relationship with export performance. Within export memory use, four export memory use dimensions have been discovered: instrumental, conceptual, legitimizing and manipulating. Results from the qualitative study based on the data from a mail survey with 354 responses reveal that the development of export memory quality is positively related with quality of export information acquisition, the quality of export information interpretation, export coordination, and integration of the information into the organizational system. Several company and environmental factors have also been examined in terms of their relationship with export memory use. The two factors found to be significantly related to the extent of export memory use are acquisition of export information quality and export memory quality. The results reveal that export memory quality is positively related to the extent of export memory use which in turn was found to be positively related to export performance. Furthermore, results of the study show that there is only one aspect of export memory use that significantly affects export performance – the extent of export memory use. This finding could mean that there is no particular type of export memory use favored since the choice of the type of use is situation specific. Additional results reveal that environmental turbulence and export memory overload have moderating effects on the relationship between export memory use and export performance.

Assessment of the impact of discharges from surface water sewers on receiving water quality

A broad based approach has been used to assess the impact of discharges to rivers from surface water sewers, with the primary objective of determining whether such discharges have a measurable impact on water quality. Three parameters, each reflecting the effects of intermittent pollution, were included in a field work programme of biological and chemical sampling and analysis which covered 47 sewer outfall sites. These parameters were the numbers and types of benthic macroinvertebrates upstream and downstream of the outfalls, the concentrations of metals in sediments, and the concentrations of metals in algae upstream and downstream of the outfalls. Information on the sewered catchments was collected from Local Authorities and by observation of the time of sampling, and includes catchment areas, land uses, evidence of connection to the foul system, and receiving water quality classification. The methods used for site selection, sampling, laboratory analysis and data analysis are fully described, and the survey results presented. Statistical and graphical analysis of the biological data, with the aid of BMWP scores, showed that there was a small but persistent fall in water quality downstream of the studied outfalls. Further analysis including the catchment information indicated that initial water quality, sewered catchment size, receiving stream size, and catchment land use were important factors in determining the impact. Finally, the survey results were used to produce guidelines for the estimation of surface water sewer discharge impacts from knowledge of the catchment characteristics, so that planning authorities can consider water quality when new drainage systems are designed.

Optimising the clinical analysis of retinal image quality in the human eye

Visual perception is dependent on both light transmission through the eye and neuronal conduction through the visual pathway. Advances in clinical diagnostics and treatment modalities over recent years have increased the opportunities to improve the optical path and retinal image quality. Higher order aberrations and retinal straylight are two major factors that influence light transmission through the eye and ultimately, visual outcome. Recent technological advancements have brought these important factors into the clinical domain, however the potential applications of these tools and considerations regarding interpretation of data are much underestimated. The purpose of this thesis was to validate and optimise wavefront analysers and a new clinical tool for the objective evaluation of intraocular scatter. The application of these methods in a clinical setting involving a range of conditions was also explored. The work was divided into two principal sections: 1. Wavefront Aberrometry: optimisation, validation and clinical application The main findings of this work were: • Observer manipulation of the aberrometer increases variability by a factor of 3. • Ocular misalignment can profoundly affect reliability, notably for off-axis aberrations. • Aberrations measured with wavefront analysers using different principles are not interchangeable, with poor relationships and significant differences between values. • Instrument myopia of around 0.30D is induced when performing wavefront analysis in non-cyclopleged eyes; values can be as high as 3D, being higher as the baseline level of myopia decreases. Associated accommodation changes may result in relevant changes to the aberration profile, particularly with respect to spherical aberration. • Young adult healthy Caucasian eyes have significantly more spherical aberration than Asian eyes when matched for age, gender, axial length and refractive error. Axial length is significantly correlated with most components of the aberration profile. 2. Intraocular light scatter: Evaluation of subjective measures and validation and application of a new objective method utilising clinically derived wavefront patterns. The main findings of this work were: • Subjective measures of clinical straylight are highly repeatable. Three measurements are suggested as the optimum number for increased reliability. • Significant differences in straylight values were found for contact lenses designed for contrast enhancement compared to clear lenses of the same design and material specifications. Specifically, grey/green tints induced significantly higher values of retinal straylight. • Wavefront patterns from a commercial Hartmann-Shack device can be used to obtain objective measures of scatter and are well correlated with subjective straylight values. • Perceived retinal stray light was similar in groups of patients implanted with monofocal and multi focal intraocular lenses. Correlation between objective and subjective measurements of scatter is poor, possibly due to different illumination conditions between the testing procedures, or a neural component which may alter with age. Careful acquisition results in highly reproducible in vivo measures of higher order aberrations; however, data from different devices are not interchangeable which brings the accuracy of measurement into question. Objective measures of intraocular straylight can be derived from clinical aberrometry and may be of great diagnostic and management importance in the future.

Geospatial data quality indicators

Indicators which summarise the characteristics of spatiotemporal data coverages significantly simplify quality evaluation, decision making and justification processes by providing a number of quality cues that are easy to manage and avoiding information overflow. Criteria which are commonly prioritised in evaluating spatial data quality and assessing a dataset’s fitness for use include lineage, completeness, logical consistency, positional accuracy, temporal and attribute accuracy. However, user requirements may go far beyond these broadlyaccepted spatial quality metrics, to incorporate specific and complex factors which are less easily measured. This paper discusses the results of a study of high level user requirements in geospatial data selection and data quality evaluation. It reports on the geospatial data quality indicators which were identified as user priorities, and which can potentially be standardised to enable intercomparison of datasets against user requirements. We briefly describe the implications for tools and standards to support the communication and intercomparison of data quality, and the ways in which these can contribute to the generation of a GEO label.

Management of nut allergy influences quality of life and anxiety in children and their mothers

Nut allergy is known to impact on the quality of life (QoL) and anxiety of both the allergic child and their parents, but little is known about how the management of food allergy is associated with these variables. To investigate the impact of nut allergy on QoL and anxiety in mothers and children with nut allergy in order to identify management strategies that may influence these factors. Forty-one nut allergic children (age 6–16 yrs) and their mothers completed questionnaires to assess maternal and children’s QoL (PedsQL™, WHOQOL-BREF, FAQL-PB), anxiety (SCAS, STAI) and perceived stress scale (PSS). Children also completed a nut allergy specific QoL questionnaire. Demographic data, details of previous reactions, test results and management plans were collected using parent-report questionnaires and hospital notes. Children with nut allergy had poorer emotional (p = 0.004), social (p = 0.043), and psychological (p = 0.006) QoL compared to healthy normative data. Maternal and child QoL and anxiety were not influenced by the severity of previous reactions. Mother and child reported lower anxiety (p = 0.043 and p < 0.001 respectively) when the child was prescribed an epinephrine auto-injector. Anxiety was not associated with whether the child carried the auto-injector or whether they strictly avoided traces of nuts in foods. Prescribing auto-injectors is associated with reduced anxiety for food allergic children and their mothers, but is not associated with improved adherence with medical management or reduced risk-taking behavior.

Validation of the food allergy quality of life:parental burden questionnaire in the UK

Purpose - Food allergy can have a profound effect on quality of life (QoL) of the family. The Food Allergy Quality of Life—Parental Burden Questionnaire (FAQL-PB) was developed on a US sample to assess the QoL of parents with food allergic children. The aim of this study was to examine the reliability and validity of the FAQL-PB in a UK sample and to assess the effect of asking about parental burden in the last week compared with parental burden in general, with no time limit for recall given. Methods - A total of 1,200 parents who had at least one child with food allergy were sent the FAQL-PB and the Child Health Questionnaire (CHQ-PF50); of whom only 63 % responded. Results - Factor analysis of the FAQL-PB revealed two factors: limitations on life and emotional distress. The total scale and the two sub-scales had high internal reliability (all a > 0.85). There were small to moderate but significant correlations between total FAQL-PB scores and health and parental impact measures on the CHQ-PF50 (p < 0.01). Significantly greater parental burden was reported for the no-time limited compared with the time-limited version (p < 0.01). Conclusions - The FAQL-PB is a reliable and valid measure for use in the UK. The scale could be used in clinic to assess the physical and emotional quality of life in addition to the impact on total quality of life.

Adolescent-parent disagreement on health-related quality of life of food-allergic adolescents:who makes the difference?

Background: Food-allergic adolescents are at highest risk for food allergy fatalities, which may be partly due to compromised self-management behavior. Such behavior may be negatively influenced by conflictual situations caused by adolescent–parent disagreement on the adolescent’s health-related quality of life (HRQL). Comparisons of adolescent-self-reported and parent-proxy-reported HRQL of food-allergic adolescents have never extensively been studied. The aims of this study were to investigate disagreement in adolescent-self-reports and parent-proxy-reports on the HRQL of food-allergic adolescents and to investigate the factors influencing adolescent–parent disagreement. Methods: Teenager Form (TF) and Parent Form (PFA) of the Food Allergy Quality of Life Questionnaire (FAQLQ), Food Allergy Independent Measure (FAIM), and Brief-Illness Perception Questionnaire (Brief-IPQ) were sent to food-allergic Dutch adolescents (13–17 years) and their parents. ICCs, t-tests, and Bland–Altman plots were used to investigate adolescent–parent disagreement. Participant characteristics, illness expectations, and illness perceptions influencing adolescent–parent disagreement were studied using regression analysis. Results: Seventy adolescent–parent pairs were included. There were a moderate correlation (ICC = 0.61, P < 0.001) and no significant difference (3.78 vs 3.56, P = 0.103) between adolescent-self-reported and parent-proxy-reported HRQL at group level. However, Bland–Altman plots showed relevant differences (exceeding the minimal important difference) for 63% of all adolescent–parent pairs. Adolescent’s age (>15 years), poorer adolescent-reported illness comprehension (Brief-IPQ-TF, coherence), and higher adolescent-reported perceived disease severity (Food Allergy Independent Measure-Teenager Form & -Parent Form) were associated with adolescent–parent disagreement. Conclusions: Adolescent–parent disagreement on the adolescent’s HRQL was mainly associated with adolescents’ rather than parents’ perceptions and characteristics. Illness comprehension of the adolescent may be an important target for intervention aimed at reducing adolescent–parent disagreement.

Introduction : the role of quality, production and technological innovation in improving competitive performance

Quality, production and technological innovation management rank among the most important matters of concern to modern manufacturing organisations. They can provide companies with the decisive means of gaining a competitive advantage, especially within industries where there is an increasing similarity in product design and manufacturing processes. The papers in this special issue of International Journal of Technology Management have all been selected as examples of how aspects of quality, production and technological innovation can help to improve competitive performance. Most are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the theme was 'Getting Ahead Through Technology and People'. At the conference itself over 80 papers were presented by authors from 15 countries around the world. Among the many topics addressed within the conference theme, technological innovation, quality and production management emerged as attracting the greatest concern and interest of delegates, particularly those from industry. For any new initiative to be implemented successfully, it should be led from the top of the organization. Achieving the desired level of commitment from top management can, however, be a difficulty. In the first paper of this issue, Mackness investigates this question by explaining how systems thinking can help. In the systems approach, properties such as 'emergence', 'hierarchy', 'commnication' and 'control' are used to assist top managers in preparing for change. Mackness's paper is then complemented by Iijima and Hasegawa's contribution in which they investigate the development of Quality Information Management (QIM) in Japan. They present the idea of a Design Review and demonstrate how it can be used to trace and reduce quality-related losses. The next paper on the subject of quality is by Whittle and colleagues. It relates to total quality and the process of culture change within organisations. Using the findings of investigations carried out in a number of case study companies, they describe four generic models which have been identified as characterising methods of implementing total quality within existing organisation cultures. Boaden and Dale's paper also relates to the management of quality, but looks specifically at the construction industry where it has been found there is still some confusion over the role of Quality Assurance (QA) and Total Quality Management (TQM). They describe the results of a questionnaire survey of forty companies in the industry and compare them to similar work carried out in other industries. Szakonyi's contribution then completes this group of papers which all relate specifically to the question of quality. His concern is with the two ways in which R&D or engineering managers can work on improving quality. The first is by improving it in the laboratory, while the second is by working with other functions to improve quality in the company. The next group of papers in this issue all address aspects of production management. Umeda's paper proposes a new manufacturing-oriented simulation package for production management which provides important information for both design and operation of manufacturing systems. A simulation for production strategy in a Computer Integrated Manufacturing (CIM) environment is also discussed. This paper is then followed by a contribution by Tanaka and colleagues in which they consider loading schedules for manufacturing orders in a Material Requirements Planning (MRP) environment. They compare mathematical programming with a knowledge-based approach, and comment on their relative effectiveness for different practical situations. Engstrom and Medbo's paper then looks at a particular aspect of production system design, namely the question of devising group working arrangements for assembly with new product structures. Using the case of a Swedish vehicle assembly plant where long cycle assembly work has been adopted, they advocate the use of a generally applicable product structure which can be adapted to suit individual local conditions. In the last paper of this particular group, Tay considers how automation has affected the production efficiency in Singapore. Using data from ten major industries he identifies several factors which are positively correlated with efficiency, with capital intensity being of greatest interest to policy makers. The two following papers examine the case of electronic data interchange (EDI) as a means of improving the efficiency and quality of trading relationships. Banerjee and Banerjee consider a particular approach to material provisioning for production systems using orderless inventory replenishment. Using the example of a single supplier and multiple buyers they develop an analytical model which is applicable for the exchange of information between trading partners using EDI. They conclude that EDI-based inventory control can be attractive from economic as well as other standpoints and that the approach is consistent with and can be instrumental in moving towards just-in-time (JIT) inventory management. Slacker's complementary viewpoint on EDI is from the perspective of the quality relation-ship between the customer and supplier. Based on the experience of Lucas, a supplier within the automotive industry, he concludes that both banks and trading companies must take responsibility for the development of payment mechanisms which satisfy the requirements of quality trading. The three final papers of this issue relate to technological innovation and are all country based. Berman and Khalil report on a survey of US technological effectiveness in the global economy. The importance of education is supported in their conclusions, although it remains unclear to what extent the US government can play a wider role in promoting technological innovation and new industries. The role of technology in national development is taken up by Martinsons and Valdemars who examine the case of the former Soviet Union. The failure to successfully infuse technology into Soviet enterprises is seen as a factor in that country's demise, and it is anticipated that the newly liberalised economies will be able to encourage greater technological creativity. This point is then taken up in Perminov's concluding paper which looks in detail at Russia. Here a similar analysis is made of the concluding paper which looks in detail at Russia. Here a similar analysis is made of the Soviet Union's technological decline, but a development strategy is also presented within the context of the change from a centralised to a free market economy. The papers included in this special issue of the International Journal of Technology Management each represent a unique and particular contribution to their own specific area of concern. Together, however, they also argue or demonstrate the general improvements in competitive performance that can be achieved through the application of modern principles and practice to the management of quality, production and technological innovation.

Quality management and performance:a comparison between the UK and Turkey

Purpose: The aim of this article is to detail the correlation between quality management, specifically its tools and critical success factors, and performance in terms of primary operational and secondary organisational performances. Design/methodology/approach: Survey data from the UK and Turkey were analysed using exploratory factor analyses, structural equation modelling and regression analysis. Findings: The results show that quality management has a significant and positive impact on both primary and secondary performances; that Turkish and UK attitudes to quality management are similar; and that quality management is widely practised in manufacturing and service industries but has more statistical emphasis in the manufacturing sector. The main challenge for making quality management practice more effective lies in an appropriate balanced use of the different sorts of the tools and critical success factors. Originality/value: This study takes a novel approach by: (i) exploring the relationship between primary operational and secondary organisational performances, (ii) using service and manufacturing data and (iii) making a cross-country comparison between the UK (a developed economy) and Turkey (a developing economy). Limitations: Detailed contrast provided between only two countries. © 2013 Copyright Taylor and Francis Group, LLC.

Exploring quality of life in families of children living with and without a severe food allergy

This study aimed to explore the impact of food allergy on quality of life in children with food allergy and their primary caregivers, compared to a healthy non-food allergy comparison group. Food allergy children (n = 34) and control children (n = 15), aged 8–12, and their respective primary caregivers (n = 30/n = 13), completed generic quality of life scales (PedsQL™ and WHOQOLBREF) and were asked to take photographs and keep a diary about factors that they believed enhanced and/or limited their quality of life, over a one-week period. Questionnaire analysis showed that parents of children with food allergy had significantly lower quality of life in the social relationships domain and lower overall quality of life than the comparison parents. In contrast, children with food allergy had similar or higher quality of life scores compared to comparison children. Content analysis of photograph and diary data identified ten themes that influenced both child and parental quality of life. It was concluded that although food allergy influenced quality of life for some children, their parent's quality of life was hindered to a greater extent. The variability in findings highlights the importance of assessing quality of life in individual families, considering both children with allergies and their primary caregivers.

What do students really think? Understanding postgraduate students' perception of service quality

This paper explores the components of Service Quality in HE from the Business School Postgraduate student perspective. A six-dimensional scale measuring Service Quality is developed based on focus group and survey data. Our findings highlight that postgraduate students are highly outcome oriented; the award of a reputable degree to gain employment is more important than learning for life. Whilst developing employable graduates, Business Schools must not neglect the core service; teaching & learning. In the long-term this contributes to employability rates and the reputation of institutions. However, as student satisfaction is an increasingly paramount objective, balancing the core service and factors perceived as important by postgraduate students is key.

Development and psychometric tests of the Chinese-version low vision quality of life questionnaire

Background/Aims: To develop and assess the psychometric validity of a Chinese language Vision Health related quality-of-life (VRQoL) measurement instrument for the Chinese visually impaired. Methods: The Low Vision Quality of Life Questionnaire (LVQOL) was translated and adapted into the Chinese-version Low Vision Quality of Life Questionnaire (CLVQOL). The CLVQOL was completed by 100 randomly selected people with low vision (primary group) and 100 people with normal vision (control group). Ninety-four participants from the primary group completed the CLVQOL a second time 2 weeks later (test-retest group). The internal consistency reliability, test-retest reliability, item-internal consistency, item-discrimination validity, construct validity and discriminatory power of the CLVQOL were calculated. Results: The review committee agreed that the CLVQOL replicated the meaning of the LVQOL and was sensitive to cultural differences. The Cronbach's α coefficient and the split-half coefficient for the four scales and total CLVQOL scales were 0.75-0.97. The test-retest reliability as estimated by the intraclass correlations coefficient was 0.69-0.95. Item-internal consistency was >0.4 and item-discrimination validity was generally <0.40. The Varimax rotation factor analysis of the CLVQOL identified four principal factors. the quality-of-life rating of four subscales and the total score of the CLVQOL of the primary group were lower than those of the Control group, both in hospital-based subjects and community-based subjects. Conclusion: The CLVQOL Chinese is a culturally specific vision-related quality-of-life measure instrument. It satisfies conventional psychometric criteria, discriminates visually healthy populations from low vision patients and may be valuable in screening the local community as well as for use in clinical practice or research. © Springer 2005.