Multiscale modelling of heterogeneously catalysed transesterification reaction process:an overview

Biodiesel is fast becoming one of the key transport fuels as the world endeavours to reduce its carbon footprint and find viable alternatives to oil derived fuels. Research in the field is currently focusing on more efficient ways to produce biodiesel, with the most promising avenue of research looking into the use of heterogeneous catalysis. This article presents a framework for kinetic reaction and diffusive transport modelling of the heterogeneously catalysed transesterification of triglycerides into fatty acid methyl esters (FAMEs), unveiled by a model system of tributyrin transesterification in the presence of MgO catalysts. In particular, the paper makes recommendations on multicomponent diffusion calculations such as the diffusion coefficients and molar fluxes from infinite dilution diffusion coefficients using the Wilke and Chang correlation, intrinsic reaction kinetic studies using the Eley-Rideal kinetic mechanism with methanol adsorption as the rate determining steps and multiscale reaction-diffusion process simulation between catalytic porous and bulk reactor scales. © 2013 The Royal Society of Chemistry.

Reliability modelling and verification of manufacturing processes based on process knowledge management

Reliability modelling and verification is indispensable in modern manufacturing, especially for product development risk reduction. Based on the discussion of the deficiencies of traditional reliability modelling methods for process reliability, a novel modelling method is presented herein that draws upon a knowledge network of process scenarios based on the analytic network process (ANP). An integration framework of manufacturing process reliability and product quality is presented together with a product development and reliability verification process. According to the roles of key characteristics (KCs) in manufacturing processes, KCs are organised into four clusters, that is, product KCs, material KCs, operation KCs and equipment KCs, which represent the process knowledge network of manufacturing processes. A mathematical model and algorithm is developed for calculating the reliability requirements of KCs with respect to different manufacturing process scenarios. A case study on valve-sleeve component manufacturing is provided as an application example of the new reliability modelling and verification procedure. This methodology is applied in the valve-sleeve component manufacturing processes to manage and deploy production resources.

Immunological synapse: a mathematical model of the bond formation process:mathematical modelling of the immature synapse

The cell:cell bond between an immune cell and an antigen presenting cell is a necessary event in the activation of the adaptive immune response. At the juncture between the cells, cell surface molecules on the opposing cells form non-covalent bonds and a distinct patterning is observed that is termed the immunological synapse. An important binding molecule in the synapse is the T-cell receptor (TCR), that is responsible for antigen recognition through its binding with a major-histocompatibility complex with bound peptide (pMHC). This bond leads to intracellular signalling events that culminate in the activation of the T-cell, and ultimately leads to the expression of the immune eector function. The temporal analysis of the TCR bonds during the formation of the immunological synapse presents a problem to biologists, due to the spatio-temporal scales (nanometers and picoseconds) that compare with experimental uncertainty limits. In this study, a linear stochastic model, derived from a nonlinear model of the synapse, is used to analyse the temporal dynamics of the bond attachments for the TCR. Mathematical analysis and numerical methods are employed to analyse the qualitative dynamics of the nonequilibrium membrane dynamics, with the specic aim of calculating the average persistence time for the TCR:pMHC bond. A single-threshold method, that has been previously used to successfully calculate the TCR:pMHC contact path sizes in the synapse, is applied to produce results for the average contact times of the TCR:pMHC bonds. This method is extended through the development of a two-threshold method, that produces results suggesting the average time persistence for the TCR:pMHC bond is in the order of 2-4 seconds, values that agree with experimental evidence for TCR signalling. The study reveals two distinct scaling regimes in the time persistent survival probability density prole of these bonds, one dominated by thermal uctuations and the other associated with the TCR signalling. Analysis of the thermal fluctuation regime reveals a minimal contribution to the average time persistence calculation, that has an important biological implication when comparing the probabilistic models to experimental evidence. In cases where only a few statistics can be gathered from experimental conditions, the results are unlikely to match the probabilistic predictions. The results also identify a rescaling relationship between the thermal noise and the bond length, suggesting a recalibration of the experimental conditions, to adhere to this scaling relationship, will enable biologists to identify the start of the signalling regime for previously unobserved receptor:ligand bonds. Also, the regime associated with TCR signalling exhibits a universal decay rate for the persistence probability, that is independent of the bond length.

Modelling Apoptotic cell clearance within the atherosclerotic plaque

The aged population have an increased susceptibility to infection, therefore function of the innate immune system may be impaired as we age. Macrophages, and their precursors monocytes, play an important role in host defence in the form of phagocytosis, and also link the innate and adaptive immune system via antigen presentation. Classically-activated 'M1' macrophages are pro-inflammatory, which can be induced by encountering pathogenic material or pro-inflammatory mediators. Alternatively activated 'M2' macrophages have a largely reparative role, including clearance of apoptotic bodies and debris from tissues. Despite some innate immune receptors being implicated in the clearance of apoptotic cells, the process has been observed to have a dominant anti-inflammatory phenotype with cytokines such as IL-10 and TGF-ß being implicated. The atherosclerotic plaque contains recruited monocytes and macrophages, and is a highly inflammatory environment despite high levels of apoptosis. At these sites, monocytes differentiate into macrophages and gorge on lipoproteins, resulting in formation of 'foam cells' which then undergo apoptosis, recruiting further monocytes. This project seeks to understand why, given high levels of apoptosis, the plaque is a pro-inflammatory environment. This phenomenon may be the result of the aged environment or an inability of foam cells to elicit an anti-inflammatory effect in response to dying cells. Here we demonstrate that lipoprotein treatment of macrophages in culture results in reduced capacity to clear apoptotic cells. The effect of lipoprotein treatment on apoptotic cell-mediated immune modulation of macrophage function is currently under study.

Adding constrained discontinuities to Gaussian process models of wind fields

Gaussian Processes provide good prior models for spatial data, but can be too smooth. In many physical situations there are discontinuities along bounding surfaces, for example fronts in near-surface wind fields. We describe a modelling method for such a constrained discontinuity and demonstrate how to infer the model parameters in wind fields with MCMC sampling.

Modelling frontal discontinuities in wind fields

A Bayesian procedure for the retrieval of wind vectors over the ocean using satellite borne scatterometers requires realistic prior near-surface wind field models over the oceans. We have implemented carefully chosen vector Gaussian Process models; however in some cases these models are too smooth to reproduce real atmospheric features, such as fronts. At the scale of the scatterometer observations, fronts appear as discontinuities in wind direction. Due to the nature of the retrieval problem a simple discontinuity model is not feasible, and hence we have developed a constrained discontinuity vector Gaussian Process model which ensures realistic fronts. We describe the generative model and show how to compute the data likelihood given the model. We show the results of inference using the model with Markov Chain Monte Carlo methods on both synthetic and real data.

Modelling foreign direct investment in China

This thesis consists of three empirical and one theoretical studies. While China has received an increasing amount of foreign direct investment (FDI) and become the second largest host country for FDI in recent years, the absence of comprehensive studies on FDI inflows into this country drives this research. In the first study, an econometric model is developed to analyse the economic, political, cultural and geographic determinants of both pledged and realised FDI in China. The results of this study suggest that China's relatively cheaper labour force, high degree of international integration with the outside world (represented by its exports and imports) and bilateral exchange rates are the important economic determinants of both pledged FDI and realised FDI in China. The second study analyses the regional distribution of both pledged and realised FDI within China. The econometric properties of the panel data set are examined using a standardised 't-bar' test. The empirical results indicate that provinces with higher level of international trade, lower wage rates, more R&D manpower, more preferential policies and closer ethnic links with overseas Chinese attract relatively more FDI. The third study constructs a dynamic equilibrium model to study the interactions among FDI, knowledge spillovers and long run economic growth in a developing country. The ideas of endogenous product cycles and trade-related international knowledge spillovers are modified and extended to FDI. The major conclusion is that, in the presence of FDI, economic growth is determined by the stock of human capital, the subjective discount rate and knowledge gap, while unskilled labour can not sustain growth. In the fourth study, the role of FDI in the growth process of the Chinese economy is investigated by using a panel of data for 27 provinces across China between 1986 and 1995. In addition to FDI, domestic R&D expenditure, international trade and human capital are added to the standard convergence regressions to control for different structural characteristics in each province. The empirical results support endogenous innovation growth theory in which regional per capita income can converge given technological diffusion, transfer and imitation.

Developing an enterprise simulator to support electronic supply chain for B2B electronic process

The application of any e-Solution promises significant returns. In particular, using internet technologies both within enterprises and across the supply (value) chain provides real opportunity, not only for operational improvement but also for innovative strategic positioning. However, significant questions obscure potential investment; how any value will actually be created and, importantly, how this value will be shared across the value chain is not clear. This paper will describe a programme of research that is developing an enterprise simulator that will provide a more fundamental understanding of the impact of e-Solutions across operational supply chains, in terms of both standard operational and financial measures of performance. An efficient supply chain reduces total costs of operations by sharing accurate real-time information and coordinating inter-organizational business processes. This form of electronic link between organizations is known as business-to-business (B2B) e-Business. The financial measures go beyond simple cost calculations to real bottom-line performance by modelling the financial transactions that business processes generate. The paper will show how this enterprise simulator allows for a complete supply chain to be modelled in this way across four key applications: control system design, virtual enterprises, pan-supply-chain performance metrics and supporting e-Supply-chain design methodology.

Simulation modelling for business

Simulation modelling has been used for many years in the manufacturing sector but has now become a mainstream tool in business situations. This is partly because of the popularity of business process re-engineering (BPR) and other process based improvement methods that use simulation to help analyse changes in process design. This textbook includes case studies in both manufacturing and service situations to demonstrate the usefulness of the approach. A further reason for the increasing popularity of the technique is the development of business orientated and user-friendly Windows-based software. This text provides a guide to the use of ARENA, SIMUL8 and WITNESS simulation software systems that are widely used in industry and available to students. Overall this text provides a practical guide to building and implementing the results from a simulation model. All the steps in a typical simulation study are covered including data collection, input data modelling and experimentation.

Adding constrained discontinuities to Gaussian process models of wind fields

Gaussian Processes provide good prior models for spatial data, but can be too smooth. In many physical situations there are discontinuities along bounding surfaces, for example fronts in near-surface wind fields. We describe a modelling method for such a constrained discontinuity and demonstrate how to infer the model parameters in wind fields with MCMC sampling.

The mechanics of the conform continuous extrusion process

The work describes the programme of activities relating to a mechanical study of the Conform extrusion process. The main objective was to provide a basic understanding of the mechanics of the Conform process with particular emphasis placed on modelling using experimental and theoretical considerations. The experimental equipment used includes a state of the art computer-aided data-logging system and high temperature loadcells (up to 260oC) manufactured from tungsten carbide. Full details of the experimental equipment is presented in sections 3 and 4. A theoretical model is given in Section 5. The model presented is based on the upper bound theorem using a variation of the existing extrusion theories combined with temperature changes in the feed metal across the deformation zone. In addition, constitutive equations used in the model have been generated from existing experimental data. Theoretical and experimental data are presented in tabular form in Section 6. The discussion of results includes a comprehensive graphical presentation of the experimental and theoretical data. The main findings are: (i) the establishment of stress/strain relationships and an energy balance in order to study the factors affecting redundant work, and hence a model suitable for design purposes; (ii) optimisation of the process, by determination of the extrusion pressure for the range of reduction and changes in the extrusion chamber geometry at lower wheel speeds; and (iii) an understanding of the control of the peak temperature reach during extrusion.

Modelling the innovation value chain

Innovation events – the introduction of new products or processes – represent the end of a process of knowledge sourcing and transformation. They also represent the beginning of a process of exploitation which may result in an improvement in the performance of the innovating business. This recursive process of knowledge sourcing, transformation and exploitation comprises the innovation value chain. Modelling the innovation value chain for a large group of manufacturing firms in Ireland and Northern Ireland highlights the drivers of innovation, productivity and firm growth. In terms of knowledge sourcing,we find strong complementarity between horizontal, forwards, backwards, public and internal knowledge sourcing activities. Each of these forms of knowledge sourcing also makes a positive contribution to innovation in both products and processes although public knowledge sources have only an indirect effect on innovation outputs. In the exploitation phase, innovation in both products and processes contribute positively tocompany growth, with product innovation having a short-term ‘disruption’ effect on labour productivity. Modelling the complete innovation value chain highlights the structure and complexity of the process of translating knowledge into business value and emphasises the role of skills, capital investment and firms’ other resources in the value creation process.

A study of business user based information systems development, and modelling success factors

This thesis describes research into business user involvement in the information systems application building process. The main interest of this research is in establishing and testing techniques to quantify the relationships between identified success factors and the outcome effectiveness of 'business user development' (BUD). The availability of a mechanism to measure the levels of the success factors, and quantifiably relate them to outcome effectiveness, is important in that it provides an organisation with the capability to predict and monitor effects on BUD outcome effectiveness. This is particularly important in an era where BUD levels have risen dramatically, user centred information systems development benefits are recognised as significant, and awareness of the risks of uncontrolled BUD activity is becoming more widespread. This research targets the measurement and prediction of BUD success factors and implementation effectiveness for particular business users. A questionnaire instrument and analysis technique has been tested and developed which constitutes a tool for predicting and monitoring BUD outcome effectiveness, and is based on the BUDES (Business User Development Effectiveness and Scope) research model - which is introduced and described in this thesis. The questionnaire instrument is designed for completion by 'business users' - the target community being more explicitly defined as 'people who primarily have a business role within an organisation'. The instrument, named BUD ESP (Business User Development Effectiveness and Scope Predictor), can readily be used with survey participants, and has been shown to give meaningful and representative results.