35 resultados para Make-to-Order Operations
Resumo:
This paper evaluates the contribution that village appraisals can make to sustainable development in local communities in rural areas. Based upon an evaluation of the JIGSO initiative, it both outlines the strengths of this approach and argues for the necessity of proper community infrastructure if most benefit is to be gained from it.
Resumo:
This thesis is concerned with the inventory control of items that can be considered independent of one another. The decisions when to order and in what quantity, are the controllable or independent variables in cost expressions which are minimised. The four systems considered are referred to as (Q, R), (nQ,R,T), (M,T) and (M,R,T). Wiith ((Q,R) a fixed quantity Q is ordered each time the order cover (i.e. stock in hand plus on order ) equals or falls below R, the re-order level. With the other three systems reviews are made only at intervals of T. With (nQ,R,T) an order for nQ is placed if on review the inventory cover is less than or equal to R, where n, which is an integer, is chosen at the time so that the new order cover just exceeds R. In (M, T) each order increases the order cover to M. Fnally in (M, R, T) when on review, order cover does not exceed R, enough is ordered to increase it to M. The (Q, R) system is examined at several levels of complexity, so that the theoretical savings in inventory costs obtained with more exact models could be compared with the increases in computational costs. Since the exact model was preferable for the (Q,R) system only exact models were derived for theoretical systems for the other three. Several methods of optimization were tried, but most were found inappropriate for the exact models because of non-convergence. However one method did work for each of the exact models. Demand is considered continuous, and with one exception, the distribution assumed is the normal distribution truncated so that demand is never less than zero. Shortages are assumed to result in backorders, not lost sales. However, the shortage cost is a function of three items, one of which, the backorder cost, may be either a linear, quadratic or an exponential function of the length of time of a backorder, with or without period of grace. Lead times are assumed constant or gamma distributed. Lastly, the actual supply quantity is allowed to be distributed. All the sets of equations were programmed for a KDF 9 computer and the computed performances of the four inventory control procedures are compared under each assurnption.
Resumo:
This thesis has been concerned with obtaining evidence to explore the proposition that the provision of occupational health services as arranged at the present time represents a misallocation of resources. The research has been undertaken within the occupational health service of a large Midlands food factory. As the research progressed it became evident that questions were being raised about the nature and scope of occupational health as well as the contribution, in combating danger at work, that occupational health services can make to the health and safety team. These questions have been scrutinized in depth, as they are clearly important, and a resolution of the problem of the definition of occupational health has been proposed. I have taken the approach of attempting to identify specific objectives or benefits of occupational health activities so that it is possible to assess how far these objectives are being achieved. I have looked at three aspects of occupational health; audiometry, physiotherapy and pre-employment medical examinations as these activities embody crucial concepts which are common to all activities in an occupational health programme. A three category classification of occupational health activities is proposed such that the three activities provide examples within each category. These are called personnel therapy, personnel input screening and personnel throughput screening. I conclude that I have not shown audiometry to be cost-effective. My observations of the physiotherapy service lead me to support the suggestion that there is a decline in sickness absence rates due to physiotherapy in industry. With pre-employment medical examinations I have shown that the service is product safety oriented and that benefits are extremely difficult to identify. In regard to the three services studied, in the one factory investigated, and because of the immeasurability of certain activities, I find support for the proposition that the mix of occupational health services as provided at the present time represents a misallocation of resources.
Resumo:
The economic effects of road building (beyond those accounted for in cost-benefit analysis) are not well understood. This thesis examines the issues surrounding those effects and attempts to clarify the relationship between road building and industrial location and to identify the effect on employment of that location. The literature reviewed leads to some doubt as to the efficacy of roads as an economic tool. A scries of interviews with representatives of business and property professionals in three areas adjacent to motorways is carried out. These covered the firms' location or relocation decisions, their production costs, transport needs and employment. The conclusions drawn echo the above statements based on reviewed literature: 1. There was a general lack of knowledge of transport within a firm despite subjects' very good understanding of the rest of the firms' operations. 2. The importance of major roads to the business location decision and its perceived importance to the operations of the firms was low. Property professionals sec roads as an effective marketing tool. 3. Firms have a tendency to shed labour upon relocation although this does not necessarily constitute a net loss of employment but a redistribution. Recommendations are made for further research.
Resumo:
The thesis discusses the result of a critical language study (CLS) of Tanzanian Presidential Kiswahili political oratory (TPKPO). The CLS was motivted by the belief that one of the principal contributions that linguists could make to the survival and development of their societies is to adopt what Shapiro (1990:12) paraphrasing Foucault (1977) has callled "a commitment to a form of inquiry aimed at the continuous disruption of the structures of "intelligibility" upon which some of the prevailing hegemonic political prejudices and biases are based. Faifclough's (1989) ideas regarding the need for and how to conduct CLS were dapted to suit the specific goal of the curren study which was to determine the inter and intra speker vriation within contemporary Tanzanian Kiswahili political discourse taking the oratory ex-president J. K. Nyerere and tha of Prersident A. H. Mwinyi as a case in point. The results of the study, which adopted a largely ethnographic research design, permit one to make two important observations about TPKPO.
Resumo:
Teacher-fronted interaction is generally seen to place limitations on the contributions that learners can make to classroom discourse and the conclusion is that learners are unable to experiment with, for example, turn-taking mechanisms. This article looks at teacher-fronted interaction in the language classroom from the perspective of learner talk by examining how learners might take the initiative during this apparently more rigid form of interaction. Detailed microanalysis of classroom episodes, using a conversation analysis institutional discourse approach, shows how learners orient to the institutional context to make sophisticated and effective use of turn-taking mechanisms to take the initiative and direct the interaction, even in the controlled environment of teacher-fronted talk. The article describes some of the functions of such learner initiative, examines how learners and teachers co-construct interaction and how learners can create learning opportunities for themselves. It also briefly looks at teacher reactions to such initiative. The article concludes that learner initiative in teacher-fronted interaction may constitute a significant opportunity for learning and that teachers should find ways of encouraging such interaction patterns.
Resumo:
This paper aims to help supply chain managers to determine the value of retailer-supplier partnership initiatives beyond information sharing (IS) according to their specific business environment under time-varying demand conditions. For this purpose, we use integer linear programming models to quantify the benefits that can be accrued by a retailer, a supplier and system as a whole from shift in inventory ownership and shift in decision-making power with that of IS. The results of a detailed numerical study pertaining to static time horizon reveal that the shift in inventory ownership provides system-wide cost benefits in specific settings. Particularly, when it induces the retailer to order larger quantities and the supplier also prefers such orders due to significantly high setup and shipment costs. We observe that the relative benefits of shift in decision-making power are always higher than the shift in inventory ownership under all the conditions. The value of the shift in decision-making power is greater than IS particularly when the variability of underlying demand is low and time-dependent variation in production cost is high. However, when the shipment cost is negligible and order issuing efficiency of the supplier is low, the cost benefits of shift in decision-making power beyond IS are not significant. © 2012 Taylor & Francis.
Resumo:
This, the first part of a two-part article on the discretionary powers of the courts to order a sale of the family home at the request of a secured creditor, considers whether the enactment of the Trusts of Land and Appointment of Trustees Act 1996 s.15 has led judicial decision making to favour the interests of the co-owner of the home. Reviews cases heard since the coming into force of the Act, looking at the factors taken into account when balancing the interests of the creditor and debtor, including the continued need to have a family home, the availability of other assets to pay off the debt, the size of the debt and the likelihood of repayment.
Resumo:
This, the second part of a two-part article on the discretionary powers of the courts to order a sale of the family home at the request of a secured creditor, continues the review begun in part one of common factors taken into account by the courts in post-1996 cases when balancing the interest of the creditor and debtor. Considers the availability of alternative accommodation, the health of the parties, the right to private and family life, the age of the parties, hardship a sale would cause other family members and delay on the part of the creditor in prosecution of proceedings to recover its debt.
Resumo:
Animal celebrity is a human creation informing us about our socially constructed natural world. It is relational, expressive of cultural proclivities, political power plays and the quotidian everyday, as well as serious philosophical reflections on the meaning of being human. This article attempts to outline some key contours in the genealogy of animal celebrity, showing how popular culture, including fairground attractions, public relations, Hollywood movies, documentary films, zoo attractions, commercial sport and mediatised moral panics - particularly those accompanying scientific developments such as cloning - help to order, categorise and license aspects of human understanding and feelings. The nature of [animal] charisma and celebrity are explored with assistance from Jumbo the Elephant, Guy the Gorilla, Paul the clairvoyant octopus, Uggie the film star, Nénette the orang-utan and Dolly the sheep. It argues that the issue of what it is to be human lies beneath the celebritised surface or, as Donna Haraway noted, the issue 'of having to face oneself'. © 2013 Taylor & Francis.
Resumo:
Radio Frequency Identification (RFID) has been identified as a crucial technology for the modern 21st century knowledge-based economy. Some businesses have realised benefits of RFID adoption through improvements in operational efficiency, additional cost savings, and opportunities for higher revenues. RFID research in warehousing operations has been less prominent than in other application domains. To investigate how RFID technology has had an impact in warehousing, a comprehensive analysis of research findings available from articles through leading scientific article databases has been conducted. Articles from years 1995 to 2010 have been reviewed and analysed with respect to warehouse operations, RFID application domains, benefits achieved and obstacles encountered. Four discussion topics are presented covering RFID in warehousing focusing on its applications, perceived benefits, obstacles to its adoption and future trends. This is aimed at elucidating the current state of RFID in the warehouse and providing insights for researchers to establish new research agendas and for practitioners to consider and assess the adoption of RFID in warehousing functions. © 2013 Elsevier B.V.
Resumo:
Although according to Angélil-Carter (2002: 2) ‘plagiarism is a modern Western concept which arose with the introduction of copyright laws in the Eighteenth century’, its avoidance is now a basic plank of respectable academic scholarship. Student plagiarism is currently a hot topic, at least for those who teach and study in British and American universities. There are companies selling both off-the-shelf and written-to-order term papers and others, like Turnitin.com, offering an electronic detection service. Recently an Australian Rector was dismissed for persistent plagiarism earlier in his career and most Anglo-American universities have warnings against and definitions of plagiarism on their websites – indeed Pennycook notes that in the mid-90s Stanford University's documents about plagiarism were reproduced by the University of Oregon apparently without attribution, and suggests, whimsically, that there is 'one set of standards for the guardians of truth and knowledge and another for those seeking entry' (1996: 213), (example and quote taken from Pecorari, 2002, p 29).
Resumo:
The primary objective of this paper is to elimination of the problem of sensitivity to parameter variation of induction motor drive. The proposed sensorless strategy is based on an algorithm permitting a better simultaneous estimation of the rotor speed and the stator resistance including an adaptive mechanism based on the lyaponov theory. To study the reliability and the robustness of the sensorless technique to abnormal operations, some simulation tests have been performed under several cases. The proposed sensorless vector control scheme showed a good performance behavior in the transient and steady states, with an excellent disturbance rejection of the load torque. © 2013 Praise Worthy Prize S.r.l. - All rights reserved.
Resumo:
There is a paucity of literature regarding the construction and operation of corporate identity at the stakeholder group level. This article examines corporate identity from the perspective of an individual stakeholder group, namely, front-line employees. A stakeholder group that is central to the development of an organization’s corporate identity as it spans an organization’s boundaries, frequently interacts with both internal and external stakeholders, and influences a firm’s financial performance by building customer loyalty and satisfaction. The article reviews the corporate identity, branding, services and social identity literatures to address how corporate identity manifests within the front-line employee stakeholder group, identifying what components comprise front-line employee corporate identity and assessing what contribution front-line employees make to constructing a strong and enduring corporate identity for an organization. In reviewing the literature the article develops propositions that, in conjunction with a conceptual model, constitute the generation of theory that is recommended for empirical testing.
Resumo:
As the pressure continues to grow on Diamond and the world's synchrotrons for higher throughput of diffraction experiments, new and novel techniques are required for presenting micron dimension crystals to the X ray beam. Currently this task is both labour intensive and primarily a serial process. Diffraction measurements typically take milliseconds but sample preparation and presentation can reduce throughput down to 4 measurements an hour. With beamline waiting times as long as two years it is of key importance for researchers to capitalize on available beam time, generating as much data as possible. Other approaches detailed in the literature [1] [2] [3] are very much skewed towards automating, with robotics, the actions of a human protocols. The work detailed here is the development and discussion of a bottom up approach relying on SSAW self assembly, including material selection, microfluidic integration and tuning of the acoustic cavity to order the protein crystals.