A new tool for measurement of process-based performance of multispecialty tertiary care hospitals

There is an increasing need of a model for the process-based performance measurement of multispecialty tertiary care hospitals for quality improvement. Analytic hierarchy process (AHP) is utilized in this study to evolve such a model. Each step in the model was derived by group-discussions and brainstorming sessions among experienced clinicians and managers. This tool was applied to two tertiary care teaching hospitals in Barbados and India. The model enabled identification of specific areas where neither hospital performed very well, and helped to suggest recommendations to improve those areas. AHP is recommended as a valuable tool to measure the process-based performance of multispecialty tertiary care hospitals. © Emerald Group Publishing Limited.

Reliability management of machine tool technology: a case study of current practice

Considerable attention has been given in the literature to identifying and describing the effective elements which positively affect the improvement of product reliability. These have been perceived by many as the 'state of the art' in the manufacturing industry. The applicability, diffusion and effectiveness of such methods and philosophies, as a means of systematically improving the reliability of a product, come in the main from case studies and single and infra-industry empirical studies. These studies have both been carried out within the wider context of quality assurance and management, and taking reliability as a discipline in its own right. However, it is somewhat of a surprise that there are no recently published findings or research studies on the adoption of these methods by the machine tool industry. This may lead one to construct several hypothesised paradigms: (a) that machine tool manufacturers compared to other industries, are slow to respond to propositions given in the literature by theorists or (b) this may indicate that a large proportion of the manufacturers make little use of the reliability improvement techniques as described in the literature, with the overall perception that they will not lead to any significant improvements? On the other hand, it is evident that hypothetical verification of the operational and engineering methods of reliability achievement and improvement adopted in the machine tool industry is less widely researched. Therefore, research into this area is needed in order to explore the 'state of the art' practice in the machine tool industry. This is in terms of the status, structure and activities of the operation of the reliability function. This paper outlines a research programme being conducted with the co-operation of a leading machine tool manufacturer, whose UK manufacturing plant produces in the main Vertical Machining Centres (VMCs) and is continuously undergoing incremental transitions in product reliability improvement.

An evaluation of pharmacy education and pre-registration training

This thesis covers two major aspects of pharmacy education; undergraduate education and pre-registration training. A cohort of pharmacy graduates were surveyed over a period of four years, on issues related to undergraduate education, pre-registration training and continuing education. These graduates were the first-ever to sit the pre-registration examination. In addition, the opinions of pre-registration tutors were obtained on pre-registration training, during the year that competence-based assessment was introduced. It was concluded that although the undergraduate course provided a broad base of knowledge suitable for graduates in all branches of pharmacy, several issues were identified which would require attention in future developments of the course. These were: 1. the strong support for the expansion of clinical, social and practice-based teaching. 2. the strong support to retain the scientific content to the same extent as in the three-year course. 3. a greater use of problem-based learning methods. The graduates supported the provision of a pre-registration continuing education course to help prepare for the examination and in areas inadequately covered in the undergraduate course. There was also support for the introduction of some form of split branch training. There was no strong evidence to suggest that the training had been an application of undergraduate education. In general, competence-based training was well regarded by tutors as an appropriate and effective method of skill assessment. However, community tutors felt it was difficult to carry out effectively due to day-to-day time constraints. The assistant tutors in hospital pharmacy were found to have a very important role in provision of training, and should be adequately trained and supported. The study recommends the introduction of uniform training and a quality assurance mechanism for all tutors and assistants undertaking this role.

Satisfaction with knowledge and competencies:a multi-country study of employers and business graduates

This study critically discusses findings from a research project involving four European countries. The project had two main aims. The first was to develop a systematic procedure for assessing the balance between knowledge and competencies acquired in higher, further and vocational education and the specific needs of the labor market. The second aim was to develop and test a set of meta-level quality indicators aimed at evaluating the linkages between education and employment. The project was designed to address the lack of employer input concerning the requirements of business graduates for successful workplace performance and the need for more specific industry-driven feedback to guide administrative heads at universities and personnel at quality assurance agencies in curriculum development and revision. Approach: The project was distinctive in that it combined different partners from higher education, vocational training, industry and quality assurance. Project partners designed and implemented an innovative approach, based on literature review, qualitative interviews and surveys in the four countries, in order to identify and confirm key knowledge and competency requirements. This study presents this step-by-step approach, as well as survey findings from a sample of 900 business graduates and employers. In addition, it introduces two Partial Least Squares (PLS) path models for predicting satisfaction with work performance and satisfaction with business education. Results: Survey findings revealed that employers were not very confident regarding business graduates’ abilities in key knowledge areas and in key generic competencies. In subsequent analysis, these graduate abilities were tested and identified as important predictors of employers’ satisfaction with graduates’ work performance. Conclusion: The industry-driven approach introduced in this study can serve as a guide to assist different types of educational institutions to better align study programs with changing labor market requirements. Recommendations for curriculum improvement are discussed.

Grading and disease management in national screening for diabetic retinopathy in England and Wales

Aims - A National Screening Programme for diabetic eye disease in the UK is in development. We propose a grading and early disease management protocol to detect sight-threatening diabetic retinopathy and any retinopathy, which will allow precise quality assurance at all steps while minimizing false-positive referral to the hospital eye service. Methods - Expert panel structured discussions between 2000 and 2002 with review of existing evidence and grading classifications. Proposals - Principles of the protocol include: separate grading of retinopathy and maculopathy, minimum number of steps, compatible with central monitoring, expandable for established more complex systems and for research, no lesion counting, no ‘questionable’ lesions, attempt to detect focal exudative, diffuse and ischaemic maculopathy and fast track referral from primary or secondary graders. Sight-threatening diabetic retinopathy is defined as: preproliferative retinopathy or worse, sight-threatening maculopathy and/or the presence of photocoagulation. In the centrally reported minimum data set retinopathy is graded into four levels: none (R0), background (R1), preproliferative (R2), proliferative (R3). Maculopathy and photocoagulation are graded as absent (M0, P0) or present (M1, P1). Discussion - The protocol developed by the Diabetic Retinopathy Grading and Disease Management Working Party represents a new consensus upon which national guidelines can be based leading to the introduction of quality-assured screening for people with diabetes.

Benefit segmentation of international travelers to Macau, China

The purpose of this study is threefold: (1) to identify the underlying benefits sought by international visitors to Macau, China, which has emerged as a popular gambling destination in Asia; (2) to segment tourists visiting Macau by employing a cluster analysis based on the benefits sought; and (3) to examine any salient differences between the segment groups with regard to their behavioral characteristics, socio-economic characteristics, and demographic profiles. A convenience sample was used to collect data in the Macau International Airport, in the Macau Ferry Terminal, and at the border gate with Mainland China. A total 1,513 useful surveys were retained for data analysis. Cluster analysis discloses four distinct clusters: "convention and business seekers," "family and vacation seekers," "gambling and shopping seekers," and "multi-purpose seekers." Based on the results of our findings, several managerial implications are discussed. © Taylor & Francis Group, LLC.

Educating for sustainability in language degrees:a tale of 2 case-studies

Purpose According to the 2014 joint report drafted by the Quality Assurance Agency and Higher Education Academy (QAA/HEA), universities have a key role to play in the development of sustainability literate graduates who can contribute to an environmentally responsible society. In this paper, the authors aim to assess language students’ understanding of sustainable development (SD) issues. Design/methodology/approach Study 1 surveys two cohorts of final year language students about to enter the graduate job market, and Study 2 surveys first year language students before and after the inclusion of SD content in one of their modules. The questions to the students are provided along with qualitative and quantitative results. Findings Results suggest that only 48% of language graduates are currently aware that they will need to take account of the environmental impact of their work as professional practitioners, and 52% do not consider it appropriate to learn about SD during their degree. However, results also suggest that incorporating SD early on in the language curriculum could contribute positively to the development of sustainability literate graduates. Originality/value While many language departments are aware of the importance of integrating sustainability into their curricula, and while employers are increasingly demanding sustainability literate graduates, there is little evidence that language students leave university with a real understanding of sustainability issues. This paper presents evidence of the current situation as well as a novel way to integrate sustainability into the language curriculum in order to remedy the situation.

A new paradigm in large-scale assembly-research priorities in measurement assisted assembly

This paper presents for the first time the concept of measurement assisted assembly (MAA) and outlines the research priorities of the realisation of this concept in the industry. MAA denotes a paradigm shift in assembly for high value and complex products and encompasses the development and use of novel metrology processes for the holistic integration and capability enhancement of key assembly and ancillary processes. A complete framework for MAA is detailed showing how this can facilitate a step change in assembly process capability and efficiency for large and complex products, such as airframes, where traditional assembly processes exhibit the requirement for rectification and rework, use inflexible tooling and are largely manual, resulting in cost and cycle time pressures. The concept of MAA encompasses a range of innovativemeasurement- assisted processes which enable rapid partto- part assembly, increased use of flexible automation, traceable quality assurance and control, reduced structure weight and improved levels of precision across the dimensional scales. A full scale industrial trial of MAA technologies has been carried out on an experimental aircraft wing demonstrating the viability of the approach while studies within 140 smaller companies have highlighted the need for better adoption of existing process capability and quality control standards. The identified research priorities for MAA include the development of both frameless and tooling embedded automated metrology networks. Other research priorities relate to the development of integrated dimensional variation management, thermal compensation algorithms as well as measurement planning and inspection of algorithms linking design to measurement and process planning. © Springer-Verlag London 2013.

Developing a robust self evaluation framework for active learning:the first stage of an ERASMUS+ project (QAEMarketPlace4HEI)

In ensuring the quality of learning and teaching in Higher Education, self-evaluation is an important component of the process. An example would be the approach taken within the CDIO community whereby self-evaluation against the CDIO standards is part of the quality assurance process. Eight European universities (Reykjavik University, Iceland; Turku University of Applied Sciences, Finland; Aarhus University, Denmark; Helsinki Metropolia University of Applied Sciences, Finland; Ume? University, Sweden; Telecom Bretagne, France; Aston University, United Kingdom; Queens University Belfast, United Kingdom) are engaged in an EU funded Erasmus + project that is exploring the quality assurance process associated with active learning. The development of a new self-evaluation framework that feeds into a ?Marketplace? where participating institutions can be paired up and then engage in peer evaluations and sharing around each institutions approach to and implementation of active learning. All of the partner institutions are engaged in the application of CDIO within their engineering programmes and this has provided a common starting point for the partnership to form and the project to be developed. Although the initial focus will be CDIO, the longer term aim is that the approach could be of value beyond CDIO and within other disciplines. The focus of this paper is the process by which the self-evaluation framework is being developed and the form of the draft framework. In today?s Higher Education environment, the need to comply with Quality Assurance standards is an ever present feature of programme development and review. When engaging in a project that spans several countries, the wealth of applicable standards and guidelines is significant. In working towards the development of a robust Self Evaluation Framework for this project, the project team decided to take a wide view of the available resources to ensure a full consideration of different requirements and practices. The approach to developing the framework considered: a) institutional standards and processes b) national standards and processes e.g. QAA in the UK c) documents relating to regional / global accreditation schemes e.g. ABET d) requirements / guidelines relating to particular learning and teaching frameworks e.g. CDIO. The resulting draft self-evaluation framework is to be implemented within the project team to start with to support the initial ?Marketplace? pairing process. Following this initial work, changes will be considered before a final version is made available as part of the project outputs. Particular consideration has been paid to the extent of the framework, as a key objective of the project is to ensure that the approach to quality assurance has impact but is not overly demanding in terms of time or paperwork. In other words that it is focused on action and value added to staff, students and the programmes being considered.