Build-up of auditory stream segregation induced by tone sequences of constant or alternating frequency and the resetting effects of single deviants

A sequence of constant-frequency tones can promote streaming in a subsequent sequence of alternating-frequency tones, but why this effect occurs is not fully understood and its time course has not been investigated. Experiment 1 used a 2.0-s-long constant-frequency inducer (10 repetitions of a low-frequency pure tone) to promote segregation in a subsequent, 1.2-s test sequence of alternating low- and high-frequency tones. Replacing the final inducer tone with silence substantially reduced reported test-sequence segregation. This reduction did not occur when either the 4th or 7th inducer was replaced with silence. This suggests that a change at the induction/test-sequence boundary actively resets build-up, rather than less segregation occurring simply because fewer inducer tones were presented. Furthermore, Experiment 2 found that a constant-frequency inducer produced its maximum segregation-promoting effect after only three tones—this contrasts with the more gradual build-up typically observed for alternating-frequency sequences. Experiment 3 required listeners to judge continuously the grouping of 20-s test sequences. Constant-frequency inducers were considerably more effective at promoting segregation than alternating ones; this difference persisted for ~10 s. In addition, resetting arising from a single deviant (longer tone) was associated only with constant-frequency inducers. Overall, the results suggest that constant-frequency inducers promote segregation by capturing one subset of test-sequence tones into an ongoing, preestablished stream, and that a deviant tone may reduce segregation by disrupting this capture. These findings offer new insight into the dynamics of stream segregation, and have implications for the neural basis of streaming and the role of attention in stream formation. (PsycINFO Database Record (c) 2013 APA, all rights reserved)

Formant-frequency variation and its effects on across-formant grouping in speech perception

How speech is separated perceptually from other speech remains poorly understood. In a series of experiments, perceptual organisation was probed by presenting three-formant (F1+F2+F3) analogues of target sentences dichotically, together with a competitor for F2 (F2C), or for F2+F3, which listeners must reject to optimise recognition. To control for energetic masking, the competitor was always presented in the opposite ear to the corresponding target formant(s). Sine-wave speech was used initially, and different versions of F2C were derived from F2 using separate manipulations of its amplitude and frequency contours. F2Cs with time-varying frequency contours were highly effective competitors, whatever their amplitude characteristics, whereas constant-frequency F2Cs were ineffective. Subsequent studies used synthetic-formant speech to explore the effects of manipulating the rate and depth of formant-frequency change in the competitor. Competitor efficacy was not tuned to the rate of formant-frequency variation in the target sentences; rather, the reduction in intelligibility increased with competitor rate relative to the rate for the target sentences. Therefore, differences in speech rate may not be a useful cue for separating the speech of concurrent talkers. Effects of competitors whose depth of formant-frequency variation was scaled by a range of factors were explored using competitors derived either by inverting the frequency contour of F2 about its geometric mean (plausibly speech-like pattern) or by using a regular and arbitrary frequency contour (triangle wave, not plausibly speech-like) matched to the average rate and depth of variation for the inverted F2C. Competitor efficacy depended on the overall depth of frequency variation, not depth relative to that for the other formants. Furthermore, the triangle-wave competitors were as effective as their more speech-like counterparts. Overall, the results suggest that formant-frequency variation is critical for the across-frequency grouping of formants but that this grouping does not depend on speech-specific constraints. © Springer Science+Business Media New York 2013.

Design and development of logistics workflow systems for demand management with RFID

This paper discusses demand and supply chain management and examines how artificial intelligence techniques and RFID technology can enhance the responsiveness of the logistics workflow. This proposed system is expected to have a significant impact on the performance of logistics networks by virtue of its capabilities to adapt unexpected supply and demand changes in the volatile marketplace with the unique feature of responsiveness with the advanced technology, Radio Frequency Identification (RFID). Recent studies have found that RFID and artificial intelligence techniques drive the development of total solution in logistics industry. Apart from tracking the movement of the goods, RFID is able to play an important role to reflect the inventory level of various distribution areas. In today’s globalized industrial environment, the physical logistics operations and the associated flow of information are the essential elements for companies to realize an efficient logistics workflow scenario. Basically, a flexible logistics workflow, which is characterized by its fast responsiveness in dealing with customer requirements through the integration of various value chain activities, is fundamental to leverage business performance of enterprises. The significance of this research is the demonstration of the synergy of using a combination of advanced technologies to form an integrated system that helps achieve lean and agile logistics workflow.

Build-up of auditory stream segregation induced by tone sequences of constant or alternating frequency and the resetting effects of single deviants

Three experiments investigated the dynamics of auditory stream segregation. Experiment 1 used a 2.0-s constant-frequency inducer (10 repetitions of a low-frequency pure tone) to promote segregation in a subsequent, 1.2-s test sequence of alternating low- and high-frequency tones. Replacing the final inducer tone with silence reduced reported test-sequence segregation substantially. This reduction did not occur when either the 4th or 7th inducer was replaced with silence. This suggests that a change at the induction/test-sequence boundary actively resets buildup, rather than less segregation occurring simply because fewer inducer tones were presented. Furthermore, Experiment 2 found that a constant-frequency inducer produced its maximum segregation-promoting effect after only 3 tone cycles - this contrasts with the more gradual build-up typically observed for alternating sequences. Experiment 3 required listeners to judge continuously the grouping of 20-s test sequences. Constant-frequency inducers were considerably more effective at promoting segregation than alternating ones; this difference persisted for ∼10 s. In addition, resetting arising from a single deviant (longer tone) was associated only with constant-frequency inducers. Overall, the results suggest that constant-frequency inducers promote segregation by capturing one subset of test-sequence tones into an on-going, pre-established stream and that a deviant tone may reduce segregation by disrupting this capture. © 2013 Acoustical Society of America.

Using process mapping and business process simulation to support a process-based approach to change in a public sector organisation

A case study demonstrates the use of a process-based approach to change regarding the implementation of an information system for road traffic accident reporting in a UK police force. The supporting tools of process mapping and business process simulation are used in the change process and assist in communicating the current process design and people's roles in the overall performance of that design. The simulation model is also used to predict the performance of new designs incorporating the use of information technology. The approach is seen to have a number of advantages in the context of a public sector organisation. These include the ability for personnel to move from a traditional grouping of staff in occupational groups with relationships defined by reporting requirements to a view of their role in a process, which delivers a performance to a customer. By running the simulation through time it is also possible to gauge how changes at an operational level can lead to the meeting of strategic targets over time. Also the ability of simulation to proof new designs was seen as particularly important in a government agency were past failures of information technology investments had contributed to a more risk averse approach to their implementation. © 2004 Elsevier Ltd. All rights reserved.

Inhibitory influences on asynchrony as a cue for auditory segregation

A harmonic that begins before the other harmonics contributes less than they do to vowel quality. This reduction can be partly reversed by accompanying the leading portion with a captor tone. This effect is usually interpreted as reflecting perceptual grouping of the captor with the leading portion. Instead, it has recently been proposed that the captor effect depends on broadband inhibition within the central auditory system. A test of psychophysical predictions based on this proposal showed that captor efficacy is (a) maintained for noise-band captors, (b) absent when a captor accompanies a harmonic that continues after the vowel, and (c) maintained for 80 ms or more over a gap between captor offset and vowel onset. These findings support and refine the inhibitory account. PsycINFO Database Record © 2006 APA, all rights reserved.

Marketing in indigenous and Asian small firms in the West Midlands.

This study is concerned with examining the application of marketing during the start-up, development and growth of small firms in the West Midlands. As an exploratory study, it provides evidence to support the central hypothesis of the thesis that whilst many small firms have the potential to progress through to the successful growth stage of development, they fail to do so because of their owner-managers' orientation towards production and selling and because they do not apply formal marketing during the initial stages of business development. A comparative approach to studying marketing in indigenous and Asian firms is adopted in an attempt to fill a gap in the literature on the characteristics and differences in the formation and development processes of these two groups of enterprises. The study has three main objectives and is based on qualitative research techniques of in-depth interviews, case studies and longitudinal studies among sixty-six firms representing the key activities of the small firms sector of the local economy. Firstly, it investigates owner-managers' orientation in developing and managing new and established businesses and explores the sources of, and changes in their orientation during the various stages of development. Secondly, it assesses the owner-manager's awareness and understanding of what constitutes the marketing function and investigates what aspects of marketing are applied during the different stages of business development. Finally, the study monitors and evaluates the outcomes and implications of applying formal marketing techniques in a small sample of firms over a period of two years. The thesis concludes by using the findings of the study to contribute additions to existing models of growth and by proposing new models of evolution and application of marketing in small firms.

Quality performance rating

This Thesis reports on the principles and usefulness of Performance Rating as developed by the writer over a number of years. In Part one a brief analysis is made of the Quality scene and its development up to the present. The need is exposed for Performance Rating as a tool for all areas of management*. At the same time a system of Quality Control is described which the writer has further developed under the title of 'Operator Control'. This system is based on the integration of all Quality control functions with the creative functions required for Quality achievement. The discussions are mainly focussed on the general philosophy of Quality, its creation and control and that part of Operator Control which affects Performance Rating. Whereas it is shown that the combination of Operator Control and Performance Rating is both economically and technically advantageous, Performance Rating can also usefully be applied under inspection control conditions. Part two describes the principles of Area Performance Rating. *The need for, and the advantages of, Performance Rating are particularly demonstrated in Case study No.1. From this a summation expression is derived which gives the key for grouping of areas with similar Performance Rating (P). A model is devised on which the theory is demonstrated. Relevant case studies, carried out in practice in factories are quoted in Part two, Chapter 4, one written by the Quality manager of that particular factory. Particular stress is laid in the final conclusions on management's function in the Quality field and how greatly this function is eased and improved through the introduction of Area Performance Rating.

Exploring chain, network and cluster collaborative practices:implications for SMEs

Collaboration among enterprises has been rendered as one of the most important issues in the business agenda, either as a result of the globalisation and deregulation of markets or as a result of the Information and Communication Technology (ICT) revolution. Both factors have created a business reality where success in the collaboration practices followed, may result in improvements in the competitive position of enterprises. This paper starts from the basic business activity of the individual enterprise, looks into the chain, network and cluster collaborative practices and analyses their characteristics and the implications for Small-Medium Enterprises (SMEs). In addition, it provides insights regarding the opportunities, benefits, requirements and risks related to each collaborative practice. This paper finally argues that different collaboration practices are required, as enterprises and the industrial sectors where they operate, present distinctive characteristics.

Performance of small and medium enterprises and the impact of environmental variables: evidence from Vietnam

thesis is developed from a real life application of performance evaluation of small and medium-sized enterprises (SMEs) in Vietnam. The thesis presents two main methodological developments on evaluation of dichotomous environment variable impacts on technical efficiency. Taking into account the selection bias the thesis proposes a revised frontier separation approach for the seminal Data Envelopment Analysis (DEA) model which was developed by Charnes, Cooper, and Rhodes (1981). The revised frontier separation approach is based on a nearest neighbour propensity score matching pairing treated SMEs with their counterfactuals on the propensity score. The thesis develops order-m frontier conditioning on propensity score from the conditional order-m approach proposed by Cazals, Florens, and Simar (2002), advocated by Daraio and Simar (2005). By this development, the thesis allows the application of the conditional order-m approach with a dichotomous environment variable taking into account the existence of the self-selection problem of impact evaluation. Monte Carlo style simulations have been built to examine the effectiveness of the aforementioned developments. Methodological developments of the thesis are applied in empirical studies to evaluate the impact of training programmes on the performance of food processing SMEs and the impact of exporting on technical efficiency of textile and garment SMEs of Vietnam. The analysis shows that training programmes have no significant impact on the technical efficiency of food processing SMEs. Moreover, the analysis confirms the conclusion of the export literature that exporters are self selected into the sector. The thesis finds no significant impact from exporting activities on technical efficiency of textile and garment SMEs. However, large bias has been eliminated by the proposed approach. Results of empirical studies contribute to the understanding of the impact of different environmental variables on the performance of SMEs. It helps policy makers to design proper policy supporting the development of Vietnamese SMEs.

Multinational enterprises and technological effort by local firms:a case study of the Malaysian electronics and electrical industry

It is often assumed that foreign MNEs are the driving force behind technological development in developing economies but it has become evident in recent years that the actions of MNEs in isolation from the domestic economy. The study, therefore, examines the determinants of local firms' decisions to undertake technological effort, not only in isolation, but also in the context of linkages between domestic firms and MNEs. There is evidence that linkages between MNEs and local firms are important in explaining technological effort by local firms but direct technological assistance from MNEs does not seem to play a major role in fostering increased technological effort by local firms.

Employment effects of privatisation and foreign acquisition of Chinese state-owned enterprises

This paper investigates the effects of domestic privatisation or foreign acquisition of Chinese State Owned Enterprises (SOEs) on employment growth, using firm level data for China and a combination of propensity score matching and difference-in-differences in order to identify the causal effect. Our results suggest that, controlling for output growth there is some evidence that domestic privatisation leads to contemporaneous reductions in employment growth compared to firms that did not undergo an ownership change. By contrast, there is some evidence that foreign acquisitions show higher employment growth in the post acquisition period than non-acquired SOEs.

FDI, linkages and the efficiency of state-owned enterprises in China

As China seeks to consolidate its position as an emerging global economic power, reforming the largely inefficient state-owned enterprises (SOEs) presents a major challenge. Using a comprehensive micro data set, we investigate whether SOEs in China have benefited from the managerial, technical and organisational skills possessed by multinational firms operating in the economy, and conclude that the evidence in favour of positive spillovers is not overwhelming. Limited regional linkages and low level of absorptive capacity are found to be the main reasons for this disappointing performance. Policy makers involved in the reform of SOEs should ensure that managers have the right incentives to make long-term investment in absorptive capacity development.

What determines innovation activity in Chinese state-owned enterprises? The role of foreign direct investment

We investigate whether inward foreign direct investment (FDI), either at the firm or industry level, has any impact on product innovation by Chinese state-owned enterprises (SOEs). We use a comprehensive firm-level panel data set of some 20,000 SOEs during 1999-2005. Our results show that foreign capital participation at the firm level is associated with higher innovative activity. Inward FDI in the sector, by contrast, has a negative effect on innovative activity in SOEs on average. However, there is a positive effect of sector-level FDI on SOEs that export, invest in human capital, or undertake R&D. © 2008 Elsevier Ltd. All rights reserved.

Relationship characteristics within the supply chain of small and medium-sized construction enterprises in Thailand

The Small and Medium-sized construction Enterprises (construction SMEs) in Thailand face challenges like high fragmented structure and low productivity. Many industries improved their business performance using the supply chain integration. This research was conducted by interviewing 14 small and medium Thai building contractors to understand the features and relationship characteristics of the supply chain of construction SMEs. The study reveals that the linkages between the small and medium general contractors and other supply chain members are based on personal trust rather than contract laws, there is no systematic procedure to manage the relationship with clients during the project execution, and social connections help to maintain long-term relationship with clients. Based on the working behaviour and commitment to long-term relationship, six forms of relationship with supply side members are proposed. Finally, improvement measures for the supply chain integration of the construction SMEs in Thailand are presented.