Self-calibrated, multi-spectral photometric stereo for 3D face capture

This paper addresses the problem of obtaining 3d detailed reconstructions of human faces in real-time and with inexpensive hardware. We present an algorithm based on a monocular multi-spectral photometric-stereo setup. This system is known to capture high-detailed deforming 3d surfaces at high frame rates and without having to use any expensive hardware or synchronized light stage. However, the main challenge of such a setup is the calibration stage, which depends on the lights setup and how they interact with the specific material being captured, in this case, human faces. For this purpose we develop a self-calibration technique where the person being captured is asked to perform a rigid motion in front of the camera, maintaining a neutral expression. Rigidity constrains are then used to compute the head's motion with a structure-from-motion algorithm. Once the motion is obtained, a multi-view stereo algorithm reconstructs a coarse 3d model of the face. This coarse model is then used to estimate the lighting parameters with a stratified approach: In the first step we use a RANSAC search to identify purely diffuse points on the face and to simultaneously estimate this diffuse reflectance model. In the second step we apply non-linear optimization to fit a non-Lambertian reflectance model to the outliers of the previous step. The calibration procedure is validated with synthetic and real data.

A multimodal investigation of dynamic face perception using functional magnetic resonance imaging and magnetoencephalography

Motion is an important aspect of face perception that has been largely neglected to date. Many of the established findings are based on studies that use static facial images, which do not reflect the unique temporal dynamics available from seeing a moving face. In the present thesis a set of naturalistic dynamic facial emotional expressions was purposely created and used to investigate the neural structures involved in the perception of dynamic facial expressions of emotion, with both functional Magnetic Resonance Imaging (fMRI) and Magnetoencephalography (MEG). Through fMRI and connectivity analysis, a dynamic face perception network was identified, which is demonstrated to extend the distributed neural system for face perception (Haxby et al.,2000). Measures of effective connectivity between these regions revealed that dynamic facial stimuli were associated with specific increases in connectivity between early visual regions, such as inferior occipital gyri and superior temporal sulci, along with coupling between superior temporal sulci and amygdalae, as well as with inferior frontal gyri. MEG and Synthetic Aperture Magnetometry (SAM) were used to examine the spatiotemporal profile of neurophysiological activity within this dynamic face perception network. SAM analysis revealed a number of regions showing differential activation to dynamic versus static faces in the distributed face network, characterised by decreases in cortical oscillatory power in the beta band, which were spatially coincident with those regions that were previously identified with fMRI. These findings support the presence of a distributed network of cortical regions that mediate the perception of dynamic facial expressions, with the fMRI data providing information on the spatial co-ordinates paralleled by the MEG data, which indicate the temporal dynamics within this network. This integrated multimodal approach offers both excellent spatial and temporal resolution, thereby providing an opportunity to explore dynamic brain activity and connectivity during face processing.

The changing face of people management in India

India has been identified as one of the biggest emerging markets in the world. Indian organizations have increasingly begun to understand the importance of human resources and have started to take into account the motivation, commitment and morale of its workforce. Despite great advances in human resource practices in India, the relevant literature on this subject remains scarce. This book seeks to fill the critical gap in the literature by providing a thorough understanding of the changing face of Indian HRM systems. Seeking to provide a comprehensive overview of Indian HRM practices, the book is structured into five parts: •Developments in Indian HRM •Determinants of Indian HRM •Sector specific HRM •Emerging themes •Future challenges and the way forward The Changing Face of People Management in India is written exclusively by Indian natives in order to minimise the Western bias and to provide a realistic picture of HRM practices in India. This book is a key resource for anyone studying or working in HRM or international business or with an interest in the unique Indian HRM context.

The influence of face and group orientation on the perception of luxury goods:a four market study of East Asian consumers

Purpose: The paper aims to further extend our understanding by assessing the extent to which two prominent cultural values in East Asia i.e. face saving and group orientation drive consumers' perceptions of luxury goods across four East Asian markets. Design/methodology/approach: A multi-methods research approach was adopted consisting of: an expert panel of close to 70 participants, group discussions with five extended East Asian families, personal interviews with eight East Asian scholars, a pilot test with over 50 East Asian graduate students and a multi-market survey of 443 consumer respondents in Beijing, Tokyo, Singapore and Hanoi. Findings: The authors extend previous conceptual studies by empirically investigating the impact of these two cultural values on the perception of luxury among East Asian societies. Specifically the study reveals that across all four markets face saving has the strongest influence on the conspicuous and hedonistic dimensions of luxury, group orientation meanwhile is the strongest predictor of the quality, extended self and exclusivity dimensions of luxury. Collectively these two cultural values significantly influence East Asian perceptions of luxury. Overall, the findings reiterate the importance of understanding different cultural values and their influence across different East Asian societies. Practical implications: The findings have important implications for managers of western luxury branded goods that are seeking to penetrate East Asian markets or seek to serve East Asian consumers. Specifically, to assist with developing suitable brand positioning, products, services, communications and pricing strategies. Originality/value: This study contributes to our understanding of the subject by exploring the impact of face saving and group orientation on the perception of luxury goods across four East Asian countries. Several directions for future research are suggested. © Emerald Group Publishing Limited.

Enhancing the performance of intelligent control systems in the face of higher levels of complexity and uncertainty

Modern advances in technology have led to more complex manufacturing processes whose success centres on the ability to control these processes with a very high level of accuracy. Plant complexity inevitably leads to poor models that exhibit a high degree of parametric or functional uncertainty. The situation becomes even more complex if the plant to be controlled is characterised by a multivalued function or even if it exhibits a number of modes of behaviour during its operation. Since an intelligent controller is expected to operate and guarantee the best performance where complexity and uncertainty coexist and interact, control engineers and theorists have recently developed new control techniques under the framework of intelligent control to enhance the performance of the controller for more complex and uncertain plants. These techniques are based on incorporating model uncertainty. The newly developed control algorithms for incorporating model uncertainty are proven to give more accurate control results under uncertain conditions. In this paper, we survey some approaches that appear to be promising for enhancing the performance of intelligent control systems in the face of higher levels of complexity and uncertainty.

Le groupe du Fer de Lance mélanésien face à ses défis

Cet article examine la complexité du processus d’intégration régionale en Océanie à travers le cas du groupe du Fer de Lance mélanésien (gflm). L’émergence de cette structure subrégionale en 1988 avait pour but d’affirmer la spécificité mélanésienne au cœur du Pacifique Sud. Or, en vingt-cinq années d’existence, le Fer de Lance ne semble pas avoir pleinement réalisé tous les objectifs qu’il s’était initialement fixés. Ses ambitions, politiques en particulier, ne sont qu’en partie réalisées. Quant à la récente présidence fidjienne du Fer de Lance, elle a tenté de donner une nouvelle stature régionale au groupe, mais y est-elle parvenue ? Cet article analyse les défis politiques, intérieurs et extérieurs, que le gflm rencontre depuis sa création et considère ceux qui lui restent à relever. This paper examines the complexities of regional integration in Oceania through the case study of the Melanesian Spearhead Group (MSG). The emergence of a new subregional structure in 1988 aimed to support the development of the Melanesian identity within the South Pacific. However, after twenty-five years of existence, the Spearhead Group does not seem to have reached all its initial objectives. Its political ambition has only partly been achieved. The recent Fijian leadership of the MSG has attempted to give a new regional dimension to the Melanesian group, but has it succeeded? This paper analyses how the subregional group has faced the challenges that emerged from its regional environment as well as from within its own structure. It fnally considers the new challenges ahead for the Melanesian group.

Counter-stereotypes reduce emotional intergroup bias by eliciting surprise in the face of unexpected category combinations

In three experiments we investigated the impact that exposure to counter-stereotypes has on emotional reactions to outgroups. In Experiment 1, thinking about gender counter-stereotypes attenuated stereotyped emotions toward females and males. In Experiment 2, an immigrant counterstereotype attenuated stereotyped emotions toward this outgroup and reduced dehumanization tendencies. Experiment 3 replicated these results using an alternative measure of humanization. In both Experiments 2 and 3 sequential meditational analysis revealed that counter-stereotypes produced feelings of surprise which, in turn, elicited a cognitive process of expectancy violation which resulted in attenuated stereotyped emotions and an enhanced use of uniquely human characteristics to describe the outgroup. The findings extend research supporting the usefulness of counter-stereotype exposure for reducing prejudice and highlight its positive impact on intergroup emotions.

A geometrical model for surface roughness prediction when face milling Al 7075-T7351 with square insert tools

Surface quality is important in engineering and a vital aspect of it is surface roughness, since it plays an important role in wear resistance, ductility, tensile, and fatigue strength for machined parts. This paper reports on a research study on the development of a geometrical model for surface roughness prediction when face milling with square inserts. The model is based on a geometrical analysis of the recreation of the tool trail left on the machined surface. The model has been validated with experimental data obtained for high speed milling of aluminum alloy (Al 7075-T7351) when using a wide range of cutting speed, feed per tooth, axial depth of cut and different values of tool nose radius (0.8. mm and 2.5. mm), using the Taguchi method as the design of experiments. The experimental roughness was obtained by measuring the surface roughness of the milled surfaces with a non-contact profilometer. The developed model can be used for any combination of material workpiece and tool, when tool flank wear is not considered and is suitable for using any tool diameter with any number of teeth and tool nose radius. The results show that the developed model achieved an excellent performance with almost 98% accuracy in terms of predicting the surface roughness when compared to the experimental data. © 2014 The Society of Manufacturing Engineers.

Integrated optimisation of surface roughness and tool performance when face milling 416 SS

Tool life is an important factor to be considered during the optimisation of a machining process since cutting parameters can be adjusted to optimise tool changing, reducing cost and time of production. Also the performance of a tool is directly linked to the generated surface roughness and this is important in cases where there are strict surface quality requirements. The prediction of tool life and the resulting surface roughness in milling operations has attracted considerable research efforts. The research reported herein is focused on defining the influence of milling cutting parameters such as cutting speed, feed rate and axial depth of cut, on three major tool performance parameters namely, tool life, material removal and surface roughness. The research is seeking to define methods that will allow the selection of optimal parameters for best tool performance when face milling 416 stainless steel bars. For this study the Taguchi method was applied in a special design of an orthogonal array that allows studying the entire parameter space with only a number of experiments representing savings in cost and time of experiments. The findings were that the cutting speed has the most influence on tool life and surface roughness and very limited influence on material removal. By last tool life can be judged either from tool life or volume of material removal.

Artificial neural networks for surface roughness prediction when face milling Al 7075-T7351

In this work, different artificial neural networks (ANN) are developed for the prediction of surface roughness (R a) values in Al alloy 7075-T7351 after face milling machining process. The radial base (RBNN), feed forward (FFNN), and generalized regression (GRNN) networks were selected, and the data used for training these networks were derived from experiments conducted using a high-speed milling machine. The Taguchi design of experiment was applied to reduce the time and cost of the experiments. From this study, the performance of each ANN used in this research was measured with the mean square error percentage and it was observed that FFNN achieved the best results. Also the Pearson correlation coefficient was calculated to analyze the correlation between the five inputs (cutting speed, feed per tooth, axial depth of cut, chip°s width, and chip°s thickness) selected for the network with the selected output (surface roughness). Results showed a strong correlation between the chip thickness and the surface roughness followed by the cutting speed. © ASM International.

Developmental commonalities between object and face recognition in adolescence

In the visual perception literature, the recognition of faces has often been contrasted with that of non-face objects, in terms of differences with regard to the role of parts, part relations and holistic processing. However, recent evidence from developmental studies has begun to blur this sharp distinction. We review evidence for a protracted development of object recognition that is reminiscent of the well-documented slow maturation observed for faces. The prolonged development manifests itself in a retarded processing of metric part relations as opposed to that of individual parts and offers surprising parallels to developmental accounts of face recognition, even though the interpretation of the data is less clear with regard to holistic processing. We conclude that such results might indicate functional commonalities between the mechanisms underlying the recognition of faces and non-face objects, which are modulated by different task requirements in the two stimulus domains.

Taking risks in the face of uncertainty:an exploratory analysis of green innovation

The relationship between uncertainty and firms’ risk-taking behaviour has been a focus of investigation since early discussion of the nature of enterprise activity. Here, we focus on how firms’ perceptions of environmental uncertainty and their perceptions of the risks involved impact on their willingness to undertake green innovation. Analysis is based on a cross-sectional survey of UK food companies undertaken in 2008. The results reinforce the relationship between perceived environmental uncertainty and perceived innovation risk and emphasise the importance of macro-uncertainty in shaping firms’ willingness to undertake green innovation. The perceived (market-related) riskiness of innovation also positively influences the probability of innovating, suggesting either a proactive approach to stimulating market disruption or an opportunistic approach to innovation leadership.

Influence of cutting parameters and tool wear on martensitic stainless steel surface integrity after a face milling process

Surface finish is one of the most relevant aspects of machining operations, since it is one of the principle methods to assess quality. Also, surface finish influences mechanical properties such as fatigue behavior, wear, corrosion, etc. The feed, the cutting speed, the cutting tool material, the workpiece material and the cutting tool wear are some of the most important factors that affects the surface roughness of the machined surface. Due to the importance of the martensitic 416 stainless steel in the petroleum industry, especially in valve parts and pump shafts, this material was selected to study the influence of the feed per tooth and cutting speed on tool wear and surface integrity. Also the influence of tool wear on surface roughness is analyzed. Results showed that high values of roughness are obtained when using low cutting speed and feed per tooth and by using these conditions tool wear decreases prolonging tool life. Copyright © 2009 by ASME.

Empirical expression of tool wear when face milling 416 SS

During a machining process, cutting parameters must be taken into account, since depending on them the cutting edge starts to wear out to the point that tool can fail and needs to be change, which increases the cost and time of production. Since wear is a negative phenomenon on the cutting tool, due to the fact that tool life is reduced, it is important to optimize the cutting variables to be used during the machining process, in order to increase tool life. This research is focused on the influence of cutting parameters such as cutting speed, feed per tooth and axial depth of cut on tool wear during a face milling operation. The Taguchi method is applied in this study, since it uses a special design of orthogonal array to study the entire parameters space, with only few numbers of experiments. Also a relationship between tool wear and the cutting parameters is presented. For the studies, a martensitic 416 stainless steel was selected, due to the importance of this material in the machining of valve parts and pump shafts. Copyright © 2009 by ASME.