River basin surveillance using remotely sensed data: a water resources information management system

This thesis describes the development of an operational river basin water resources information management system. The river or drainage basin is the fundamental unit of the system; in both the modelling and prediction of hydrological processes, and in the monitoring of the effect of catchment management policies. A primary concern of the study is the collection of sufficient and sufficiently accurate information to model hydrological processes. Remote sensing, in combination with conventional point source measurement, can be a valuable source of information, but is often overlooked by hydrologists, due to the cost of acquisition and processing. This thesis describes a number of cost effective methods of acquiring remotely sensed imagery, from airborne video survey to real time ingestion of meteorological satellite data. Inexpensive micro-computer systems and peripherals are used throughout to process and manipulate the data. Spatial information systems provide a means of integrating these data with topographic and thematic cartographic data, and historical records. For the system to have any real potential the data must be stored in a readily accessible format and be easily manipulated within the database. The design of efficient man-machine interfaces and the use of software enginering methodologies are therefore included in this thesis as a major part of the design of the system. The use of low cost technologies, from micro-computers to video cameras, enables the introduction of water resources information management systems into developing countries where the potential benefits are greatest.

The evolution and design of safety management systems

Research in safety management has been inhibited by lack of consensus as to the definitions of the terms with which it is concerned and, in general, the lack of an agreed theoretical framework within which to collate and contrast empirical findings. This thesis sets out definitions of key terms (hazard, risk, accident, incident and safety) and provides a theoretical framework. This framework has been informed by many sources but especially the Management Oversight and Risk Tree (MORT), cybernetics and the Viable System Model (VSM). Fieldwork designs are proposed for the empirical development of an analytical framework and its use to assist study of the development of safety management in organisations.

Accounting students' perceptions of a Learning Management System:an international comparison

Purpose - The purpose of this study is to investigate student perceptions of the design features included in an off the shelf Learning Management System (LMS) in teaching undergraduate accounting students. Design/methodology/approach - Questionnaire responses from 846 accounting students studying in the UK, Australia and New Zealand provide international data to develop a model to explain student perception of the LMS. Findings - The final model shows student satisfaction with the use of a LMS is positively associated with three variables: usefulness of lecture notes, bulletin boards and discussion forums, and other LMS tools. Further, the comparison of cultural differences of the three countries shows all students treat the provision of notes as a desirable attribute on a LMS. Findings also suggest that although students find the provision of materials over the LMS does not enhance student engagement in class, overall a comparison of the three countries shows all students treat the provision of notes as a desirable attribute of a LMS. Research limitations/implications - Future research should collect ethnicity data to enable an analysis of cultural influence on student perceptions of the LMS. Practical implications - As increased motivation to learn is found to contribute to improved achievement of learning outcomes, the study's findings have implications for faculty contemplating the adoption of a LMS in their courses. The findings specifically confirm that usefulness of lecture notes, use of bulletin/discussion boards, and other LMS tools are positively endorsed by students and hence increase their motivation to learn. Originality/value - The current paper adds to the literature as the motivation to use and engage with LMSs by accounting students is not well understood. © Emerald Group Publishing Limited.

Project management system for a concurrent engineering framework

Completing projects faster than normal is always a challenge as it often demands many paradigm shifts. Globalization opportunities and competition from private sectors and multinationals are forcing the management of public sector organizations in India's petroleum industry to take various aggressive strategies to maintain profitability. These projects are required to be completed sooner than with a typical schedule to remain competitive, get faster return on investment and give longer project life.

Diabetic retinopathy and blockade of the renin–angiotensin system:new data from the DIRECT study programme

The pathogenesis and medical management of diabetic retinopathy is reviewed. The importance of good control of blood glucose and blood pressure remain key elements in the prevention and treatment of diabetic retinopathy, and a number of specific metabolic pathways have been identified that may be useful additional targets for therapeutic intervention. Trial data, however, aimed specifically to answer the questions of optimum medical management are limited, so the DIRECT study of renin-angiotensin blockade using oral candesartan 32 mg daily is a welcome addition to our knowledge. This arose from the promising improvement of retinopathy outcomes in the EUCLID study of lisinopril in type I diabetes. In DIRECT, 5 years of candesartan treatment in type I diabetes reduced the incidence of retinopathy by two or more steps (EDTRS) in severity by 18% (P = 0.0508) and, in a post hoc analysis, reduced the incidence of retinopathy by three-step progression by 35% (P = 0.034). In type I diabetes patients there was no effect on progression of established retinopathy. In contrast, in type II diabetes, 5 years of candesartan treatment resulted in 34% regression of retinopathy (P ≤0.009). Importantly, an overall significant change towards less-severe retinopathy was noted in both type I and II diabetes (P0.03). Although there is still no absolute proof that these effects were specific to RAS blockade, or just an effect of lower blood pressure, it is reasonable to conclude that candesartan has earned a place in the medical management of diabetic retinopathy, to prevent the problem in type I diabetes and to treat the early stages in type II diabetes. © 2010 Macmillan Publishers Limited All rights reserved.

Facilitating intuitive-guided learning in a serious game through integration with a learning content management system

Increased global uptake of entertainment gaming has the potential to lead to high expectations of engagement and interactivity from users of technology-enhanced learning environments. Blended approaches to implementing game-based learning as part of distance or technology-enhanced education have led to demonstrations of the benefits they might bring, allowing learners to interact with immersive technologies as part of a broader, structured learning experience. In this article, we explore how the integration of a serious game can be extended to a learning content management system (LCMS) to support a blended and holistic approach, described as an 'intuitive-guided' method. Through a case study within the EU-Funded Adaptive Learning via Intuitive/Interactive, Collaborative and Emotional Systems (ALICE) project, a technical integration of a gaming engine with a proprietary LCMS is demonstrated, building upon earlier work and demonstrating how this approach might be realized. In particular, how this method can support an intuitive-guided approach to learning is considered, whereby the learner is given the potential to explore a non-linear environment whilst scaffolding and blending provide guidance ensuring targeted learning objectives are met. Through an evaluation of the developed prototype with 32 students aged 14-16 across two Italian schools, a varied response from learners is observed, coupled with a positive reception from tutors. The study demonstrates that challenges remain in providing high-fidelity content in a classroom environment, particularly as an increasing gap in technology availability between leisure and school times emerges.

Implementing a knowledge management system within an NHS hospital:a case study exploring the roll-out of an Electronic Patient Record (EPR)

This research aims to contribute to understanding the implementation of knowledge management systems (KMS) in the field of health through a case study, leading to theory building and theory extension. We use the concept of the business process approach to knowledge management as a theoretical lens to analyse and explore how a large teaching hospital developed, executed and practically implemented a KMS. A qualitative study was conducted over a 2.5 year period with data collected from semi-structured interviews with eight members of the strategic management team, 12 clinical users and 20 patients in addition to non-participant observation of meetings and documents. The theoretical propositions strategy was used as the overarching approach for data analysis. Our case study provides evidence that true patient centred approaches to supporting care delivery with a KMS benefit from process thinking at both the planning and implementation stages, and an emphasis on the knowledge demands resulting from: the activities along the care pathways; where cross-overs in care occur; and knowledge sharing for the integration of care. The findings also suggest that despite the theoretical awareness of KMS implementation methodologies, the actual execution of such systems requires practice and learning. Flexible, fluid approaches through rehearsal are important and communications strategies should focus heavily on transparency incorporating both structured and unstructured communication methods.

The Proinflammatory Environment in Potential Heart and Lung Donors: Prevalence and Impact of Donor Management and Hormonal Therapy

BACKGROUND: Brain stem death can elicit a potentially manipulable cardiotoxic proinflammatory cytokine response. We investigated the prevalence of this response, the impact of donor management with tri-iodothyronine (T3) and methylprednisolone (MP) administration, and the relationship of biomarkers to organ function and transplant suitability. METHODS: In a prospective randomized double-blinded factorially designed study of T3 and MP therapy, we measured serum levels of interleukin-1 and -6 (IL-1 and IL-6), tumor necrosis factor-alpha (TNF-alpha), C-reactive protein, and procalcitonin (PCT) levels in 79 potential heart or lung donors. Measurements were performed before and after 4 hr of algorithm-based donor management to optimize cardiorespiratory function and +/-hormone treatment. Donors were assigned to receive T3, MP, both drugs, or placebo. RESULTS: Initial IL-1 was elevated in 16% donors, IL-6 in 100%, TNF-alpha in 28%, CRP in 98%, and PCT in 87%. Overall biomarker concentrations did not change between initial and later measurements and neither T3 nor MP effected any change. Both PCT (P =0.02) and TNF-alpha (P =0.044) levels were higher in donor hearts with marginal hemodynamics at initial assessment. Higher PCT levels were related to worse cardiac index and right and left ventricular ejection fractions and a PCT level more than 2 ng x mL(-1) may attenuate any improvement in cardiac index gained by donor management. No differences were observed between initially marginal and nonmarginal donor lungs. A PCT level less than or equal to 2 ng x mL(-1) but not other biomarkers predicted transplant suitability following management. CONCLUSIONS: There is high prevalence of a proinflammatory environment in the organ donor that is not affected by tri-iodothyronine or MP therapy. High PCT and TNF-alpha levels are associated with donor heart dysfunction. (C) 2009 Lippincott Williams & Wilkins, Inc.

Protein deposition at polymer surfaces:the bulk and surface structure-property effects of hydrogels

The primary objective of this research has been to investigate the interfacial phenomenon of protein adsorption in relation to the bulk and surface structure-property effect s of hydrogel polymers. In order to achieve this it was first necessary to characterise the bulk and surface properties of the hydrogels, with regard to the structural chemistry of their component monomers. The bulk properties of the hydrogels were established using equilibrium water content measurements, together with water-binding studies by differential scanning calorimetry (D.S.C.). Hamilton and captive air bubble-contact angle techniques were employed to characterise the hydrogel-water interface and from which by a mathematical derivation, the interfacial free energy (ðsw) and the surface free energy components (ð psv, ðdsv, ðsv) were obtained. From the adsorption studies using the radio labelled iodinated (125I) proteins of human serum albumin (H.S.A.) and human fibrinogen (H.Fb.), it was Found that multi-layered adsorption was occurring and that the rate and type of this adsorption was dependent on the physico-chemical behaviour of the adsorbing protein (and its bulk concentration in solution), together with the surface energetics of the adsorbent polymer. A potential method for the invitro evaluation of a material's 'biocompatibility' was also investigated, based on an empirically observed relationship between the adsorption of albumin and fibrinogen and the 'biocompatibility' of polymeric materials. Furthermore, some consideration was also given to the biocompatibility problem of proteinaceous deposit formation on hydrophilic soft' contact lenses and in addition a number of potential continual wear contact lens formulations now undergoing clinical trials,were characterised by the above techniques.

Evaluating and improving the performance of video content distribution in lossy networks

The contributions in this research are split in to three distinct, but related, areas. The focus of the work is based on improving the efficiency of video content distribution in the networks that are liable to packet loss, such as the Internet. Initially, the benefits and limitations of content distribution using Forward Error Correction (FEC) in conjunction with the Transmission Control Protocol (TCP) is presented. Since added FEC can be used to reduce the number of retransmissions, the requirement for TCP to deal with any losses is greatly reduced. When real-time applications are needed, delay must be kept to a minimum, and retransmissions not desirable. A balance, therefore, between additional bandwidth and delays due to retransmissions must be struck. This is followed by the proposal of a hybrid transport, specifically for H.264 encoded video, as a compromise between the delay-prone TCP and the loss-prone UDP. It is argued that the playback quality at the receiver often need not be 100% perfect, providing a certain level is assured. Reliable TCP is used to transmit and guarantee delivery of the most important packets. The delay associated with the proposal is measured, and the potential for use as an alternative to the conventional methods of transporting video by either TCP or UDP alone is demonstrated. Finally, a new objective measurement is investigated for assessing the playback quality of video transported using TCP. A new metric is defined to characterise the quality of playback in terms of its continuity. Using packet traces generated from real TCP connections in a lossy environment, simulating the playback of a video is possible, whilst monitoring buffer behaviour to calculate pause intensity values. Subjective tests are conducted to verify the effectiveness of the metric introduced and show that the results of objective and subjective scores made are closely correlated.

"Girls Who Do Boys Like They’re Girls": gender and call centre’s junior management

This paper focuses on the structuring of work and organization by exploring the hierarchical and gendered nature of the division of labour within a contemporary service-based organization. Central to our account is the role of the ‘team leader’, which we argue, as a junior management position, occupies a key role in understanding and accounting for the gendered hierarchical terrain of the organization. In exploring the role of team leaders, a position that empirically, tends overwhelming to be held by female members of staff, we draw attention to the perception of the gendered nature of the role by subordinate members of the organization, team-leaders themselves, and more senior members of staff. The specific constitution and character of the team leader position is brought into sharp relief through comparison with the subordinate role of ‘problem manager’, a position which was overwhelming held by men. Our ethnographic approach attempts to draw attention to that which is both ‘said’ and ‘done’ within the organizational context and the account of junior managers that emerges is highly gendered. The paper seeks to map this account onto the existing and on-going debate within Gender and Organizational research, which explores, documents and challenges Masculinities at work.

Evaluating and developing project-based learning:an empirical approach to evaluating CDIO

As a global profession, engineering is integral to the maintenance and further development of society. Indeed, contemporary social problems requiring engineering solutions are not only a consequence of natural and ‘manmade’ disasters (such as the Japanese earthquake or the oil leakage in the Gulf of Mexico) but also encapsulate 21st Century dilemmas around sustainability, poverty and pollution [2,6,7]. Given the complexity of such problems and the constant need for innovation, the demand for engineering education to provide a ready supply of suitably qualified engineering graduates, able to make innovative decisions has never been higher [3,5]. Bearing this in mind, and taking account problems of attrition in engineering education [1,6,4] innovation in the way in which the curriculum is developed and delivered is crucial. CDIO [Conceive, Design, Implement, Operate] provides a potentially ground-breaking solution to such dilemmas. Aimed at equipping students with practical engineering skills supported by the necessary theoretical background, CDIO could potentially change the way engineering is perceived and experienced within higher education. Aston University introduced CDIO into its Mechanical Engineering and Design programmes in October 2011. From its induction, engineering education researchers have ‘shadowed’ the staff responsible for developing and teaching the programme. Utilising an Action Research Design, and adopting a mixed methodological research design, the researchers have worked closely with the teaching team to critically reflect on the processes involved in introducing CDIO into the curriculum. Concurrently, research has been conducted to capture students’ perspectives of CDIO. In evaluating the introduction of CDIO at Aston, the researchers have developed a distinctive research strategy with which to evaluate CDIO. It is the emergent findings from this research that form the basis of this paper. Although early-on in its development CDIO is making a significant difference to engineering education at the University. The paper draws attention to pedagogical, practical and professional issues – discussing each one in turn and in doing so critically analysing the value of CDIO from academic, student and industrial perspectives. The paper concludes by noting that whilst CDIO represents a forwardthinking approach to engineering education, the need for constant innovation in learning and teaching should not be forgotten. Indeed, engineering education needs to put itself at the forefront of pedagogic practice. Providing all-rounded engineers, ready to take on the challenges of the 21st Century!