The performance of stabilized and unstabilized minestone in an aqueous environment with emphasis on its erosion resistance

Britain's sea and flood defences are becoming increasingly aged and as a consequence, more fragile and vulnerable. As the government's philosophy on resources shifts against the use of prime quarried and dredged geo-materials, the need to find alternative bulk materials to bolster Britain's prone defences becomes more pressing. One conceivable source for such a material is colliery waste or minestone. Although a plethora of erosion-abrasion studies have been carried out on soils and soil-cements, very little research has been undertaken to determine the resistance of minestone and its cement stabilized form to the effects of water erosion. The thesis reviews the current extent to which soil-cements, minestone and cement stabilized minestone (CSM) have been employed for hydraulic construction projects. A synopsis is also given on the effects of immersion on shales, mudstones and minestone, especially with regard to the phenomena of slaking. A laboratory study was undertaken featuring a selection of minestones from several British coalfields. The stability of minestone and CSM in sea water and distilled water was assessed using slaking tests and immersion monitoring and the bearing on the use of these materials for hydraulic construction is discussed. Following a review of current erosion apparatus, the erosion/abrasion test and rotating cylinder device were chosen and employed to assess the erosion resistance of minestone and CSM. Comparison was made with a sand mix designed to represent a dredged sand, the more traditional, bulk hydraulic construction material. The results of the erosion study suggest that both minestone and CSM were more resistant to erosion and abrasion than equivalently treated sand mixes. The greater resistance of minestone to the agents of erosion and abrasion is attributed to several factors including the size of the particles, a greater degree of cement bonding and the ability of the minestone aggregate to absorb, rather than transmit shock waves produced by impacting abrasive particles. Although minestone is shown to be highly unstable when subjected to cyclic changes in its moisture content, the study suggests that even in an intertidal regime where cyclic immersion does takes place, minestone will retain sufficient moisture within its fabric to prevent slaking from taking place. The slaking study reveals a close relationship between slaking susceptibility and total pore surface area as revealed by porosimetry. The immersion study shows that although the fabric of CSM is rapidly attacked in sea water, a high degree of the disruption is associated with the edges and corners of samples (ie. free surface) while the integrity of the internal fabric remains relatively intact. CSM samples were shown to be resilient when subjected to immersion in distilled water. An overall assessment of minestone and CSM would suggest that with the implementation of judicious selection and appropriate quality control they could be used as alternative materials for flood and sea defences. It is believed, that even in the harsh regime of a marine environment, CSM could be employed for temporary and sacrificial schemes.

The influence of Arabian Gulf environment on mechanisms of reinforcement corrosion

The reduction in the useful-service life of reinforced concrete construction in the Arabian Gulf is attributed to reinforcement corrosion. While this phenomenon is primarily related to chloride ions, the concomitant pressure of sulfate salts may accelerate the deterioration process. Another factor which might influence reinforcement corrosion is the elevated ambient temperature. While few studies have been conducted to evaluate the individual effect of sulfate contamination and temperature on chloride binding and reinforcement corrosion, the synergistic effect of these factors on concrete durability, viz.-a-viz., reinforcement corrosion, needs to be evaluated. Further, the environmental conditions of the Arabian Gulf are also conducive for accelerated carbonation. However, no data are available on the concomitant effect of chloride-sulfate contamination and elevated temperature on the carbonation behaviour of plain and blended cements.This study was conducted to evaluate the conjoint effect of chloride-sulfate contamination and temperature on the pore solution chemistry and reinforcement corrosion. The effect of chloride-sulfate contamination and elevated temperature on carbonation in plain and blended cements was also investigated. Pore solution extraction and analysis, X-ray diffraction, differential thermal analysis, scanning electron microscopy, DC linear polarization resistance and AC impedance spectroscopy techniques were utilized to study the effect of experimental parameters on chloride binding, reinforcement corrosion and carbonation.The results indicated that the concomitant presence of chloride and sulfate salts and temperature significantly influences the durability performance of concrete by: (i) decreasing the chloride binding, (ii) increasing reinforcement corrosion, and (iii) accelerating the carbonation process. To avoid such deterioration, it is advisable to minimize both chloride and sulfate contamination contributed by the mixture ingredients. Due to the known harmful role of sulfate ions in decreasing the chloride binding and increasing reinforcement corrosion, limits on allowable sulfate contamination in concrete should also be established.

A need to consider human factors during manufacturing system design

Manufacturing systems that are heavily dependent upon direct workers have an inherent complexity that the system designer is often ill-equipped to understand. This complexity is due to the interactions that cause variations in performance of the workers. Variation in human performance can be explained by many factors, however one important factor that is not currently considered in any detail during the design stage is the physical working environment. This paper presents the findings of ongoing research investigating human performance within manufacturing systems. It sets out to identify the form of the relationships that exist between changes in physical working environmental variables and operator performance. These relationships can provide managers with a decision basis when designing and managing manufacturing systems and their environments.

Which factors drive firm survival within an industry boundary over time?:the UK onshore oil and gas production industry 1984-1999

This thesis looks at the UK onshore oil and gas production industry and follows the history of a population of firms over a fifteen-year period following the industry's renaissance. It examines the linkage between firm survival, selection pressures and adaptation responses at the firm level, especially the role of discretionary adaptation, specifically exploration and exploitation strategies.Taking a Realist approach and using quantitative and qualitative methods for triangulation on a new data base derived from archival data, as well as informant interviews, it tests seven hypotheses' about post-entry survival of firms. The quantitative findings suggest that firm survival within this industry is linked to discretionary adaptation, when measured at the firm level, and to a mixture of selection and adaptation forces when measured for each firm for each individual year. The qualitative research suggests that selection factors dominate. This difference in views is unresolved. However the small, sparse population and the nature of the oil and gas industry compared with other common research contexts such as manufacturing or service firms suggests the results be treated with caution as befits a preliminary investigation. The major findings include limited support for the theory that the external environment is the major determinant of firm survival, though environment components affect firms differentially; resolution of apparent literature differences relating to the sequencing of exploration and exploitation and potential tangible evidence of coevolution. The research also finds that, though selection may be considered important by industry players, discretionary adaptation appears to play the key role, and that the key survival drivers for thispopulation are intra-industry ties, exploitation experience and a learning/experience component. Selection has a place, however, in determining the life-cycle of the firm returning to be a key survival driver at certain ages of the firm inside the industry boundary.

Institutional environment, innovative entrepreneurial entry and venture capital financing

We analyse the determinants of high growth expectations entrepreneurial entry (HGE) using individual data drawn on working age population, based on the Global Entrepreneurship Monitor (GEM) surveys for the 1998-2004 period. Individual level explanatory variables are combined with country-level factors. Our results suggest that availability of venture capital and intellectual proper rights protection are strong predictors of HGE. In addition, we also find that innovative start-ups are associated with highest growth expectations in countries with extensive supply of venture capital and strongest intellectual property rights. Once we introduce venture capital, we detect no significant effects of other elements of financial systems on high-powered entry.

Success factors of product innovation:an updated meta-analysis

Assessing factors that predict new product success (NPS) holds critical importance for companies, as research shows that despite considerable new product investment, success rates are generally below 25%. Over the decades, meta-analytical attempts have been made to summarize empirical findings on NPS factors. However, market environment changes such as increased global competition, as well as methodological advancements in meta-analytical research, present a timely opportunity to augment their results. Hence, a key objective of this research is to provide an updated and extended meta-analytic investigation of the factors affecting NPS. Using Henard and Szymanski's meta-analysis as the most comprehensive recent summary of empirical findings, this study updates their findings by analyzing articles published from 1999 through 2011, the period following the original meta-analysis. Based on 233 empirical studies (from 204 manuscripts) on NPS, with a total 2618 effect sizes, this study also takes advantage of more recent methodological developments by re-calculating effects of the meta-analysis employing a random effects model. The study's scope broadens by including overlooked but important additional variables, notably “country culture,” and discusses substantive differences between the updated meta-analysis and its predecessor. Results reveal generally weaker effect sizes than those reported by Henard and Szymanski in 2001, and provide evolutionary evidence of decreased effects of common success factors over time. Moreover, culture emerges as an important moderating factor, weakening effect sizes for individualistic countries and strengthening effects for risk-averse countries, highlighting the importance of further investigating culture's role in product innovation studies, and of tracking changes of success factors of product innovations. Finally, a sharp increase since 1999 in studies investigating product and process characteristics identifies a significant shift in research interest in new product development success factors. The finding that the importance of success factors generally declines over time calls for new theoretical approaches to better capture the nature of new product development (NPD) success factors. One might speculate that the potential to create competitive advantages through an understanding of NPD success factors is reduced as knowledge of these factors becomes more widespread among managers. Results also imply that managers attempting to improve success rates of NPDs need to consider national culture as this factor exhibits a strong moderating effect: Working in varied cultural contexts will result in differing antecedents of successful new product ventures.

The influence of environment on foliose lichen growth and its ecological significance

This chapter considers various aspects of the influence of the environment on the growth of foliose lichens and its significance in determining the ecology of individual species. Radial growth (RaG) and growth in mass of foliose lichens is influenced by climate and microclimate and also by substratum factors such as rock and bark texture, substrate chemistry, and nutrient enrichment. Seasonal fluctuations in growth, as measured by radial growth rate (RaGR) per month, often correlate best with average or total rainfall, the number of rain days, or rainfall in a specific season. Temperature has also been identified to be an important climatic factor influencing growth in some studies. Interactions between microclimatic factors and especially light intensity, temperature, and moisture status are important in determining differences in growth in relation to aspect and slope of the substratum. The physical and chemical nature of the substratum has a profound influence on the growth of foliose lichens. Hence, the effects of texture, porosity, rate of drying, and the physical changes of the substratum on growth are likely to influence lichen distributions. Bird droppings may influence growth and survival by smothering the thalli, altering the pH, or adding inhibitory and stimulatory compounds. Nitrogen and phosphate availability may also influence growth. Chemical factors also have an important influence on lichens of maritime rocks, the effect of salinity and calcium ions being of particular importance. Effects of environmental factors on growth influence the competitive ability of a lichen and ultimately its ecology and distribution.

An investigation into the adoption of electronic business in Saudi Arabia using technology-organisation-environment framework

Despite the proliferation of e-business adoption by organisations and the world-wide growth of the e-business phenomenon, there is a paucity of empirical studies that examine the adoption of e-business in the Middle East. The aim of our study is to provide insights into the salient e-business adoption issues by focusing on Saudi Arabian businesses. We developed a conceptual model for electronic business (e-business) adoption incorporating ten factors based on the technology-organization-environment framework. Survey data from 550 businesses were used to test the model and hypotheses. We conducted confirmatory factor analysis to assess the reliability and validity of constructs. The findings of the study suggest that firm technology competence, size, top management Support, technology orientation, consumer readiness, trading partner readiness and regulatory support are important antecedents of e-business adoption and utilisation. In addition, the study finds that, competitive pressure and organisational customer and competitor orientation is not a predictor for e-business adoption and utilisation. The implications of the findings are discussed and suggestions for future inquiry are presented.

The influence of environment on foliose lichen growth and its biological significance

Radial growth and growth in mass of lichens is influenced by climatic and microclimatic factors and also by substratum factors such as rock and bark texture, chemistry, and nutrient enrichment. Seasonal fluctuations in growth, as measured by radial growth rate (RaGR) per month, often correlate best with average or total rainfall, the number of rain days, or rainfall in a specific season. Temperature is also considered to be an important climatic factor in some studies. Interactions between microclimatic factors and especially light intensity, temperature, and moisture are the most important in determining local annual growth rates. The physical and chemical nature of the substratum has a profound influence on the growth of foliose lichens. Hence, the effects of texture, porosity, rate of drying, and the physical changes of the substratum on growth are likely to influence lichen distributions. Bird droppings may influence growth and survival by smothering the thalli, altering the pH, or adding inhibitory and stimulatory compounds. Nitrogen and phosphate availability may also influence growth. Chemical factors may also have an important influence on lichens of maritime rocks, the effect of salinity and calcium ions being of particular importance. Zinc, copper, and mercury may also be important in lichen growth as they have been shown to affect the chlorophyll content of lichen algae. Effects of environmental factors on growth influence the competitive ability of lichens thus influencing their ecology and distribution.

Blastocyst environment and its influence on offspring cardiovascular health:the heart of the matter

The development of adult-onset diseases such as type II diabetes, obesity and cardiovascular disease is traditionally attributed to adult lifestyle characteristics such as a lack of physical exercise, poor diet and smoking. However, evidence from both human and animal model studies has demonstrated that environmental factors such as an imbalance or reduction in maternal nutrition during gestation can have adverse effects on offspring metabolism and cardiovascular health. The severity and nature of the phenotypic changes induced in offspring is influenced by the period of gestation manipulated. In particular, the mammalian preimplantation embryo in different animal models displays particular sensitivity to environmental factors, either in vivo (maternal diet) or in vitro (embryo culture) that is associated with the onset of cardiovascular dysfunction in adult life. The detailed mechanisms by which environmental conditions can alter postnatal cardiovascular physiology are poorly understood. However, various factors including endothelial function, vascular responsiveness, the renin-angiotensin system, kidney structure and early postnatal growth dynamics have all been recognize as potential contributors. Here, we review the relationship between preimplantation embryo environment and postnatal cardiovascular disease risk, and consider biochemical, molecular, genetic and physiological pathways implicated in this association. © 2009 The Authors Journal compilation © 2009 Anatomical Society of Great Britain and Ireland.

Risk factors for childhood myopia:findings from the NICER study

PURPOSE. We explored risk factors for myopia in 12- to 13-year-old children in Northern Ireland (NI). METHODS. Stratified random sampling was performed to obtain representation of schools and children. Cycloplegia was achieved using cyclopentolate hydrochloride 1%. Distance autorefraction was measured using the Shin-Nippon SRW-5000 device. Height and weight were measured. Parents and children completed a questionnaire, including questions on parental history of myopia, sociodemographic factors, childhood levels of near vision, and physical activity to identify potential risk factors for myopia. Myopia was defined as spherical equivalent ≤0.50 diopters (D) in either eye. RESULTS. Data from 661 white children aged 12-to 13-years showed that regular physical activity was associated with a lower estimated prevalence of myopia compared to sedentary lifestyles (odds ratio [OR] = 0.46 adjusted for age, sex, deprivation score, family size, school type, urbanicity; 95% confidence interval [CI], 0.23–0.90; P for trend = 0.027). The odds of myopia were more than 2.5 times higher among children attending academically-selective schools (adjusted OR = 2.66; 95% CI, 1.48–4.78) compared to nonacademically-selective schools. There was no evidence of an effect of urban versus nonurban environment on the odds of myopia. Compared to children with no myopic parents, children with one or both parents being myopic were 2.91 times (95% CI, 1.54–5.52) and 7.79 times (95% CI, 2.93– 20.67) more likely to have myopia, respectively. CONCLUSIONS. In NI children, parental history of myopia and type of schooling are important determinants of myopia. The association between myopia and an environmental factor, such as physical activity levels, may provide insight into preventive strategies.

The design of contact lens based ocular drug delivery systems for single-day use:part (I) structural factors, surrogate ophthalmic dyes and passive diffusion studies

The poor retention and efficacy of instilled drops as a means of delivering drugs to the ophthalmic environment is well-recognised. The potential value of contact lenses as a means of ophthalmic drug delivery, and consequent improvement of pre-corneal retention is one obvious route to the development of a more effective ocular delivery system. Furthermore, the increasing availability and clinical use of daily disposable contact lenses provides the platform for the development of viable single-day use drug delivery devices based on existing materials and lenses. In order to provide a basis for the effective design of such devices, a systematic understanding of the factors affecting the interaction of individual drugs with the lens matrix is required. Because a large number of potential structural variables are involved, it is necessary to achieve some rationalisation of the parameters and physicochemical properties (such as molecular weight, charge, partition coefficients) that influence drug interactions. Ophthalmic dyes and structurally related compounds based on the same core structure were used to investigate these various factors and the way in which they can be used in concert to design effective release systems for structurally different drugs. Initial studies of passive diffusional release form a necessary precursor to the investigation of the features of the ocular environment that over-ride this simple behaviour. Commercially available contact lenses of differing structural classifications were used to study factors affecting the uptake of the surrogate actives and their release under 'passive' conditions. The interaction between active and lens material shows considerable and complex structure dependence, which is not simply related to equilibrium water content. The structure of the polymer matrix itself was found to have the dominant controlling influence on active uptake; hydrophobic interaction with the ophthalmic dye playing a major role. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Glue ear, hearing loss and IQ:an association moderated by the child's home environment

BACKGROUND: Glue ear or otitis media with effusion (OME) is common in children and may be associated with hearing loss (HL). For most children it has no long lasting effects on cognitive development but it is unclear whether there are subgroups at higher risk of sequelae. OBJECTIVES: To examine the association between a score comprising the number of times a child had OME and HL (OME/HL score) in the first four/five years of life and IQ at age 4 and 8. To examine whether any association between OME/HL and IQ is moderated by socioeconomic, child or family factors. METHODS: Prospective, longitudinal cohort study: the Avon Longitudinal Study of Parents and Children (ALSPAC). 1155 children tested using tympanometry on up to nine occasions and hearing for speech (word recognition) on up to three occasions between age 8 months and 5 years. An OME/HL score was created and associations with IQ at ages 4 and 8 were examined. Potential moderators included a measure of the child's cognitive stimulation at home (HOME score). RESULTS: For the whole sample at age 4 the group with the highest 10% OME/HL scores had performance IQ 5 points lower [95% CI -9, -1] and verbal IQ 6 points lower [95% CI -10, -3] than the unaffected group. By age 8 the evidence for group differences was weak. There were significant interactions between OME/HL and the HOME score: those with high OME/HL scores and low 18 month HOME scores had lower IQ at age 4 and 8 than those with high OME/HL scores and high HOME scores. Adjusted mean differences ranged from 5 to 8 IQ points at age 4 and 8. CONCLUSIONS: The cognitive development of children from homes with lower levels of cognitive stimulation is susceptible to the effects of glue ear and hearing loss.