A techno-economic study of the recycling of mixed plastics to useful products

The techno-economic implications of recycling the components of mixed plastics waste have been studied in a two-part investigation: (a) An economic survey of the prospects for plastics recycling, the plastics waste arisings from retailing, building, automotive, light engineering and chemical industries have been surveyed by mans of questionnaires and interviews. This was partially successful and indicated that very considerable quantities of relatively clean plastics packaging was available in major department chains and household stores. The possibility of devising collection systems for such sources, which do not lead to any extra cost, have been suggested. However, the household collection of plastics waste has been found to be uneconomic due to high cost of collection, transportation and lack of markets for the end products. (b) In a technical study of blends of PE/PP and PE/PS which are found in admixture in waste plastics, it has been shown that they exhibit poor mechanical properties due to incompatibility. Consequently reprocessing of such unsegregated blends results in products of little technological value. The inclusion of some commercial block and graft copolymers which behave as solid phase dispersants (SPES) increase the toughness of the blends (e.g. EPDM in PE/PP blend and SBS in PE/PS blend). Also, EPDM is found to be very effective for improving the toughness of single component polypropylene. However, the improved Technical properties of such blends have been accompanied by a fast rate of photo-oxidation and loss of toughness due to the presence of unsaturation in SPD's. The change in mechanical properties occurring during oven ageing and ultra-violet light accelerated weathering of these binary and ternary blends was followed by a viscoelastonetric technique (Rheovibron) over 9,, wide range of temperatures, impact resistance at room temperature (20-41'G) and changes in functional groups (i.e. carbonyl and trans-1,4-polybutadiene). Also the heat and light stability of single and mixed plastics to which thiol antioxidants were bound to SPE1 segment have been studied and compared with conventional antioxidants. The long-term performance of the mixed plastics containing SPE1 have been improved significantly by the use of conventional and bound antioxidants. It is concluded that an estimated amount of 30000 tonnes/year of plastics waste is available from department chains and household stores which can be converted to useful end products. This justifies pilot-experiments in collaboration with supermarkets, recyclers and converters by use of low cost SPD's and additives designed to make the materials more compatible.

An appraisal of employment problems and policies at the micro-economic level

This study has concentrated on the development of an impact simulation model for use at the sub-national level. The necessity for the development of this model was demonstrated by the growth of local economic initiatives during the 1970's, and the lack of monitoring and evaluation exercise to assess their success and cost-effectiveness. The first stage of research involved the confirmation that the potential for micro-economic and spatial initiatives existed. This was done by identifying the existence of involuntary structural unemployment. The second stage examined the range of employment policy options from the macroeconomic, micro-economic and spatial perspectives, and focused on the need for evaluation of those policies. The need for spatial impact evaluation exercise in respect of other exogenous shocks, and structural changes was also recognised. The final stage involved the investigation of current techniques of evaluation and their adaptation for the purpose in hand. This led to a recognition of a gap in the armoury of techniques. The employment-dependency model has been developed to fill that gap, providing a low-budget model, capable of implementation at the small area level and generating a vast array of industrially disaggregate data, in terms of employment, employment-income, profits, value-added and gross income, related to levels of United Kingdom final demand. Thus providing scope for a variety of impact simulation exercises.

The economic impact of high growth start-ups:understanding the challenge for policy in the UK

Objectives The creation of more high-growth firms continues to be a key component of enterprise policy throughout the countries of the OECD. In the UK the developing enterprise policy framework highlights the importance of supporting businesses with growth potential. The difficulty, of course, is the ability of those delivering business support policies to accurately identify those businesses, especially at start-up, which will benefit from interventions and experiences an enhanced growth performance. This paper has a core objective of presenting new data on the number of high growth firms in the UK and providing an assessment of their economic significance. Approach This paper uses a specially created longitudinal firm-level database based on the Inter-Departmental Business Register (IDBR) held by the Office of National Statistics (ONS) for all private sector businesses in the UK for the period 1997-2008 to investigate the share of high-growth firms (including a sub-set of start-up more commonly referred to as gazelles) in successive cohorts of start-ups. We apply OECD definitions of high growth and gazelles to this database and are able to quantify for the first time their number (disaggregated by sector, region, size) and importance (employment and sales). Prior Work However, what is lacking at the core of this policy focus is any comprehensive statistical analysis of the scale and nature of high-growth firms in cohorts of new and established businesses. The evidence base in response to the question “Why do high-growth firms matter?” is surprisingly weak. Important work in this area has been initiated by Bartelsman et al., (2003),Hoffman and Jünge (2006) and Henreksen and Johansson (2009) but to date work in the UK has been limited (BERR, 2008b). Results We report that there are ~11,500 high growth firms in the UK in both 2005 and 2008. The share of high growth start-ups in the UK in 2005 (6.3%) was, contrary to the widely held perception in policy circles, higher than in the United States (5.2%). Of particular interest in the analysis are the growth trajectories (pattern of growth) of these firms as well as the extent to which they are restricted to technology-based or knowledge-based sectors. Implications and Value Using hitherto unused population data for the first time we have answered a fundamental research and policy question on the number and scale of high growth firms in the UK. We draw the conclusion that this ‘rare’ event does not readily lend itself to policy intervention on the grounds that the significant effort needed to identify such businesses ex ante would appear unjustified even if it was possible.

Marketing responsibility in an era of economic and climatic challenge

Purpose – The purpose of this paper is to illustrate Michael Thomas's concept of civic professionalism and social trusteeship as a future alternative to the current marketing profession's code of conduct and to put this in the context of climate change and ecological sustainability as a model for firms everywhere. Design/methodology/approach – Review of the marketing profession's responsibility towards society, communities and the ecology of the planet in the twenty-first century in the light of climate change. Findings – The hypothesis for the paper emerges as: whether it is possible for Chinese firms to embrace the needs of twenty-first century global ecological sustainability in meeting their own economic requirements for development and financial prosperity. Research limitations/implications – Limited secondary research and primary research that is also limited in terms of scope. Practical implications – As we move into an era of Chinese economic supremacy, we marketers must face up to the responsibility we have towards balancing the progression of global economic development (and selling goods and services in global market systems) with our responsibility towards our cultural systems and the global ecological system (the global ecosystem), the home of all our economic wealth. Social implications – To extrapolate lessons and opportunities for firms from developing economies as they move towards global domination of world economic markets and, suggest strategies for sustainability that they can, and should, adopt. Originality/value – The paper presents a theoretical framework for a global strategy for sustainability, and provides a vision of marketing responsibility that embraces civic professionalism, social trusteeship and a strategy for sustainability.

The value of intellectual property to firms and society

Economists view intellectual property rights (IPRs) as policy tools for encouraging innovation, but they recognize that they can also inhibit competition. There are many types of IPRs and institutions concerned with their administration. We begin by outlining how these complex and varied rights are supposed to work and how they interact with other characteristics of firms and markets. We then survey the available literature on patents, trade marks, and copyright to assess the value of these IPRs to firms and the costs to firms of acquiring and defending their rights. The paper concludes with suggestions for topics requiring further research to inform public policy better.

The value of innovation:the interaction of competition, R&D and IP

This paper analyses market valuations of UK companies using a new data set of their R&D and IP activities (1989–2002). In contrast to previous studies, the analysis is conducted at the sectoral-level, where the sectors are based on the technological classification originating from Pavitt [Pavitt, K., 1984. Sectoral patterns of technical change. Research Policy 13, 343–373]. The first main result is that the valuation of R&D varies substantially across these sectors. Another important result is that, on average, firms that receive only UK patents tend to have no significant market premium. In direct contrast, patenting through the European Patent Office does raise market value, as does the registration of trade marks in the UK for most sectors. To explore these variations the paper links competitive conditions with the market valuation of innovation. Using profit persistence as a measure of competitive pressure, we find that the sectors that are the most competitive have the lowest market valuation of R&D. Furthermore, within the most competitive sector (‘science based’ manufacturing), firms with larger market shares (an inverse indicator of competitive pressure) also have higher R&D valuations, as well as some positive return to UK patents. We conclude that this evidence supports Schumpeter by finding higher returns to innovation in less than fully competitive markets and contradicts Arrow [Arrow, K., 1962. Economic welfare and the allocation of resources for invention. In: Nelson, R. (Ed.), The Rate and Direction of Inventive Activity. Princeton University Press, Princeton], who argued that, with the existence of IP rights, competitive market structure provides higher incentives to innovate.

Understanding high-value manufacturing in Scottish SMEs

Purpose: The purpose of this paper is to investigate the use of high-value manufacturing (HVM) concepts in Scottish SMEs and define how they are being used to gain competitive advantage. Design/methodology/approach: Cross-sectional research carried out using a large-scale survey of 435 SMEs and semi-structured interviews of a subset of 50 SMEs. Findings: Findings indicate that HVM is not a homogeneous state but an umbrella term for a number of operational models adopted by manufacturers that are progressively moving from simple price-based production; companies must, as a foundation, be operationally excellent in all lifecycle phases before extending their capability by offering a more comprehensive service; HVM is not a static state but a journey that differs in nature for each manufacturer depending on the nature of its market and customer. Research limitations/implications: The approach to theory must be more integrated combining aspects of marketing, strategic and operational theory. Research must be carried out using the supply chain, rather than the firm, as the unit of analysis. Practical implications: Manufacturing efficiency has now become an order qualifier and competitive advantage should now be sought through the integration of design, production and service activities from strategic levels down to operational levels across all the functions of a business which link seamlessly to customer and supplier activities. Originality/value: This paper contains insights into Scottish SMEs and their practice of HVM; defines the activity that makes up HVM at an operational as opposed to an economic or strategic level; proposes a model that characterises the stages of HVM that SMEs transition through. © Emerald Group Publishing Limited.

Market value, R&D and intellectual property:an empirical analysis of large Australian firms

This paper considers the value of innovation to large Australian firms. Specifically, we investigate how R&D and intellectual property activity influences the market value of firms, using a Tobin’s q approach. R&D data are available for the period 1994–96 and data on patent, trade mark and design applications for 1996. The findings suggest that R&D and patent activity are positively and significantly associated with market value. The results also suggest that private returns to R&D in Australia are low by international standards.

Recent research trend of economic-lot scheduling problems

Purpose - This research note aims to present a summary of research concerning economic-lot scheduling problem (ELSP). Design/methodology/approach - The paper's approach is to review over 100 selected studies published in the last 15 years (1997-2012), which are then grouped under different research themes. Findings - Five research themes are identified and insights for future studies are reported at the end of this paper. Research limitations/implications - The motivation of preparing this research note is to summarize key research studies in this field since 1997, when the ELSP problems have been verified as NP-hard. Originality/value - ELSP is an important scheduling problem that has been studied since the 1950s. Because of its complexity in delivering a feasible analytical closed form solution, many studies in the last two decades employed heuristic algorithms in order to come up with good and acceptable solutions. As a consequence, the solution approaches are quite diversified. The major contribution of this paper is to provide researchers who are interested in this area with a quick reference guide on the reviewed studies. © Emerald Group Publishing Limited.

Barriers to capturing the value of advanced services and digitisation in the road transport industry

Servitization and digitization together provide significant opportunities to raise the performance and profitability of the road transport industry. To date these opportunities are only sparsely captured and the potential economic, social and environmental value is forgone. We set out to investigate the barriers to capturing the value of servitization and digitization in the road transport industry.