The Application of Geographic Information Systems to climate change & land evaluation : a study of the effects of climate change upon crop productivity in a sub-tropical environment

This research investigates the contribution that Geographic Information Systems (GIS) can make to the land suitability process used to determine the effects of a climate change scenario. The research is intended to redress the severe under representation of Developing countries within the literature examining the impacts of climatic change upon crop productivity. The methodology adopts some of the Intergovernmental Panel on Climate Change (IPCC) estimates for regional climate variations, based upon General Circulation Model predictions (GCMs) and applies them to a baseline climate for Bangladesh. Utilising the United Nations Food & Agricultural Organisation's Agro-ecological Zones land suitability methodology and crop yield model, the effects of the scenario upon agricultural productivity on 14 crops are determined. A Geographic Information System (IDRISI) is adopted in order to facilitate the methodology, in conjunction with a specially designed spreadsheet, used to determine the yield and suitability rating for each crop. A simple optimisation routine using the GIS is incorporated to provide an indication of the 'maximum theoretical' yield available to the country, should the most calorifically significant crops be cultivated on each land unit both before and after the climate change scenario. This routine will provide an estimate of the theoretical population supporting capacity of the country, both now and in the future, to assist with planning strategies and research. The research evaluates the utility of this alternative GIS based methodology for the land evaluation process and determines the relative changes in crop yields that may result from changes in temperature, photosynthesis and flooding hazard frequency. In summary, the combination of a GIS and a spreadsheet was successful, the yield prediction model indicates that the application of the climate change scenario will have a deleterious effect upon the yields of the study crops. Any yield reductions will have severe implications for agricultural practices. The optimisation routine suggests that the 'theoretical maximum' population supporting capacity is well in excess of current and future population figures. If this agricultural potential could be realised however, it may provide some amelioration from the effects of climate change.

Metrics and models to support the development of hybrid information systems

The research described here concerns the development of metrics and models to support the development of hybrid (conventional/knowledge based) integrated systems. The thesis argues from the point that, although it is well known that estimating the cost, duration and quality of information systems is a difficult task, it is far from clear what sorts of tools and techniques would adequately support a project manager in the estimation of these properties. A literature review shows that metrics (measurements) and estimating tools have been developed for conventional systems since the 1960s while there has been very little research on metrics for knowledge based systems (KBSs). Furthermore, although there are a number of theoretical problems with many of the `classic' metrics developed for conventional systems, it also appears that the tools which such metrics can be used to develop are not widely used by project managers. A survey was carried out of large UK companies which confirmed this continuing state of affairs. Before any useful tools could be developed, therefore, it was important to find out why project managers were not using these tools already. By characterising those companies that use software cost estimating (SCE) tools against those which could but do not, it was possible to recognise the involvement of the client/customer in the process of estimation. Pursuing this point, a model of the early estimating and planning stages (the EEPS model) was developed to test exactly where estimating takes place. The EEPS model suggests that estimating could take place either before a fully-developed plan has been produced, or while this plan is being produced. If it were the former, then SCE tools would be particularly useful since there is very little other data available from which to produce an estimate. A second survey, however, indicated that project managers see estimating as being essentially the latter at which point project management tools are available to support the process. It would seem, therefore, that SCE tools are not being used because project management tools are being used instead. The issue here is not with the method of developing an estimating model or tool, but; in the way in which "an estimate" is intimately tied to an understanding of what tasks are being planned. Current SCE tools are perceived by project managers as targetting the wrong point of estimation, A model (called TABATHA) is then presented which describes how an estimating tool based on an analysis of tasks would thus fit into the planning stage. The issue of whether metrics can be usefully developed for hybrid systems (which also contain KBS components) is tested by extending a number of "classic" program size and structure metrics to a KBS language, Prolog. Measurements of lines of code, Halstead's operators/operands, McCabe's cyclomatic complexity, Henry & Kafura's data flow fan-in/out and post-release reported errors were taken for a set of 80 commercially-developed LPA Prolog programs: By re~defining the metric counts for Prolog it was found that estimates of program size and error-proneness comparable to the best conventional studies are possible. This suggests that metrics can be usefully applied to KBS languages, such as Prolog and thus, the development of metncs and models to support the development of hybrid information systems is both feasible and useful.

Business information systems:technology, development and management in the E-business

Information technology is at the centre of today’s business environment. The increasing importance of e-commerce and the integration of information systems in all areas of a business means it is crucial for managers to understand and implement IS (information systems). This major text, now in its second edition, provides the skills and knowledge necessary to choose the right systems, and to develop and manage them effectively. Business Information Systems: Technology, Development and Management assumes no prior knowledge of IS or IT, and emphasises the importance of IS to management decision making. It takes a 3 part structure: Part One covers hardware and software technologies; Part Two looks at information systems analysis and design; and Part Three describes the strategic management of IS. This successful format allows each section to be studied alongside individual modules, and enables students to focus clearly on specific areas and use the book for more than one course. This book is suitable for college students, undergraduate degree and postgraduate students taking courses with modules in the practical IT skills of selection, implementation, management and use of BIS. The practical sections are also of use to managers in industry involved in the development and use of IS.

Business information systems:technology, development and management in the E-business

This major text assumes no prior knowledge of IS or IT and builds both business and Information systems knowledge to enable the reader to choose the right systems, to develop them and to manage them effectively. The three-part structure to the book covers: Introduction to business information systems Business information systems development Business information systems management Suitable for any IS, BIS or MIS course from UG to MBA level within a Business or Computer Science Department.

Business information systems:technology, development and management in the E-business

A comprehensive introduction to the technology, development and management of business information systems. The book assumes no prior knowledge of IS or IT, so that new concepts and terms are defined as clearly as possible, with explanations in the text, and definitions at the margin. In this fast-moving area, the book covers both the crucial underpinnings of the subject as well as the most recent business and technology applications. It is written for students on any IS, BIS or MIS course from undergraduate to postgraduate and MBA level within a Business or Computer Science Department.

Using process-oriented holonic (PrOH) modelling to increase understanding of information systems

Methodologies for understanding business processes and their information systems (IS) are often criticized, either for being too imprecise and philosophical (a criticism often levied at softer methodologies) or too hierarchical and mechanistic (levied at harder methodologies). The process-oriented holonic modelling methodology combines aspects of softer and harder approaches to aid modellers in designing business processes and associated IS. The methodology uses holistic thinking and a construct known as the holon to build process descriptions into a set of models known as a holarchy. This paper describes the methodology through an action research case study based in a large design and manufacturing organization. The scientific contribution is a methodology for analysing business processes in environments that are characterized by high complexity, low volume and high variety where there are minimal repeated learning opportunities, such as large IS development projects. The practical deliverables from the project gave IS and business process improvements for the case study company.

Senior managers’ perception on green information systems (IS) adoption and environmental performance:results from a field survey

Based on a Belief-Action-Outcome framework, we produced a model that shows senior managers' perception of both the antecedents to and the consequences of Green IS adoption by a firm. This conceptual model and its associated hypotheses were empirically tested using a dataset generated from a survey of 405 organizations. The results suggest that coercive pressure influences the attitude toward Green IS adoption while mimetic pressure does not. In addition, we found that there was a significant relationship between Green IS adoption, attitude, and consideration of future consequences. Finally, we found that only long term Green IS adoption was positively related to environmental performance. © 2013 Elsevier B.V.

Information systems, inter-functional collaboration and innovation in Taiwanese high-tech manufacturing firms

This article investigates whether (1) cross-functional integration within a firm and the use of information systems (IS) that support information sharing with external parties can enhance integration across the supply chain and wider networks and (2) whether collaboration with customers, suppliers and other external parties leads to increased supply chain performance in terms of new product development and introduction of new processes. Data from a high-quality survey carried out in Taiwan in 2009 were used, and appropriate econometric models were applied. Results show that the adoption of IS that enhance information sharing is vital not only for the effective communication with suppliers and with wider network members, but their adoption also has a direct effect across a firm's innovative effort. Cross-functional integration appears to matter only for the introduction of an innovative process. Collaboration with customers and suppliers affected a product's design and its overall features and functionality, respectively. © 2013 Copyright Taylor and Francis Group, LLC.

Business information systems:technology, development and management for the e-business

A comprehensive introduction to the technology, development and management of business information systems. The book assumes no prior knowledge of IS or IT, so that new concepts and terms are defined as clearly as possible, with explanations in the text, and definitions at the margin. In this fast-moving area, the book covers both the crucial underpinnings of the subject as well as the most recent business and technology applications.It is written for students on any IS, BIS or MIS course from undergraduate to postgraduate and MBA level within a Business or Computer Science Department - See more at: http://catalogue.pearsoned.ca/educator/product/Business-Information-Systems-Technology-Development-and-Management-for-the-EBusiness/9780273716624.page#sthash.LgAheK57.dpuf

Alignment of information systems and organisation structure:developing an executive information systems with a cybernetic method

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Supplementing the virtual learning environment for information systems graduate education

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Integrated information systems for a contract based company

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Business information systems:technology, development and management for the e-business

In order to run a successful business, today’s manager needs to combine business skills with an understanding of information systems and the opportunities and benefits that they bring to an organisation. Starting from basic concepts, this book provides a comprehensive and accessible guide to: •understanding the technology of business information systems; •choosing the right information system for an organisation; •developing and managing an efficient business information system; •employing information systems strategically to achieve organisational goals. Taking a problem-solving approach, Business Information Systems looks at information systems theory within the context of the most recent business and technological advances. This thoroughly revised new edition has updated and expanded coverage of contemporary key topics such as: •Web 2.0 •enterprise systems •implementation and design of IS strategy •outsourcing

GEO Label – quality information interrogation tool for geospatial datasets:towards effective visualization of quality metadata

Although the importance of dataset fitness-for-use evaluation and intercomparison is widely recognised within the GIS community, no practical tools have yet been developed to support such interrogation. GeoViQua aims to develop a GEO label which will visually summarise and allow interrogation of key informational aspects of geospatial datasets upon which users rely when selecting datasets for use. The proposed GEO label will be integrated in the Global Earth Observation System of Systems (GEOSS) and will be used as a value and trust indicator for datasets accessible through the GEO Portal. As envisioned, the GEO label will act as a decision support mechanism for dataset selection and thereby hopefully improve user recognition of the quality of datasets. To date we have conducted 3 user studies to (1) identify the informational aspects of geospatial datasets upon which users rely when assessing dataset quality and trustworthiness, (2) elicit initial user views on a GEO label and its potential role and (3), evaluate prototype label visualisations. Our first study revealed that, when evaluating quality of data, users consider 8 facets: dataset producer information; producer comments on dataset quality; dataset compliance with international standards; community advice; dataset ratings; links to dataset citations; expert value judgements; and quantitative quality information. Our second study confirmed the relevance of these facets in terms of the community-perceived function that a GEO label should fulfil: users and producers of geospatial data supported the concept of a GEO label that provides a drill-down interrogation facility covering all 8 informational aspects. Consequently, we developed three prototype label visualisations and evaluated their comparative effectiveness and user preference via a third user study to arrive at a final graphical GEO label representation. When integrated in the GEOSS, an individual GEO label will be provided for each dataset in the GEOSS clearinghouse (or other data portals and clearinghouses) based on its available quality information. Producer and feedback metadata documents are being used to dynamically assess information availability and generate the GEO labels. The producer metadata document can either be a standard ISO compliant metadata record supplied with the dataset, or an extended version of a GeoViQua-derived metadata record, and is used to assess the availability of a producer profile, producer comments, compliance with standards, citations and quantitative quality information. GeoViQua is also currently developing a feedback server to collect and encode (as metadata records) user and producer feedback on datasets; these metadata records will be used to assess the availability of user comments, ratings, expert reviews and user-supplied citations for a dataset. The GEO label will provide drill-down functionality which will allow a user to navigate to a GEO label page offering detailed quality information for its associated dataset. At this stage, we are developing the GEO label service that will be used to provide GEO labels on demand based on supplied metadata records. In this presentation, we will provide a comprehensive overview of the GEO label development process, with specific emphasis on the GEO label implementation and integration into the GEOSS.

Managing enterprises and ERP systems:a contingency model for the enterprization of operations

Purpose: The purpose of this paper is to investigate enterprise resource planning (ERP) systems development and emerging practices in the management of enterprises (i.e. parts of companies working with parts of other companies to deliver a complex product and/or service) and identify any apparent correlations. Suitable a priori contingency frameworks are then used and extended to explain apparent correlations. Discussion is given to provide guidance for researchers and practitioners to deliver better strategic, structural and operational competitive advantage through this approach; coined here as the "enterprization of operations". Design/methodology/approach: Theoretical induction uses a new empirical longitudinal case study from Zoomlion (a Chinese manufacturing company) built using an adapted form of template analysis to produce a new contingency framework. Findings: Three main types of enterprises and the three main types of ERP systems are defined and correlations between them are explained. Two relevant a priori frameworks are used to induct a new contingency model to support the enterprization of operations; known as the dynamic enterprise reference grid for ERP (DERG-ERP). Research limitations/implications: The findings are based on one longitudinal case study. Further case studies are currently being conducted in the UK and China. Practical implications: The new contingency model, the DERG-ERP, serves as a guide for ERP vendors, information systems management and operations managers hoping to grow and sustain their competitive advantage with respect to effective enterprise strategy, enterprise structure and ERP systems. Originality/value: This research explains how ERP systems and the effective management of enterprises should develop in order to sustain competitive advantage with respect to enterprise strategy, enterprise structure and ERP systems use. © Emerald Group Publishing Limited.