The effect of thermochemical treatment on the fatigue properties of alloy steels

The effect of thermochemical treatment namely carburising on the fatigue behaviour of one carbon and two alloy steels has been studied in rotating and unidirectional bending. The effect of carbon profile on the unidirect¬ional bending fatigue strength of 63SA14 was assessed, and it was found that single stage carburising with a surface carbon content of 0.8% has resulted in a higher fatigue strength than other types of carbon profiles. Residual stresses and other metallurgical variables arising from different carbon profiles, were also considered. The highest compressive stresses h~e resulted from boost-diffuse-carburising. On the other hand surface decarburisation was associated with tensile residual stresses and a reduced fatigue strength. Retained austenite was found to be detrimental in unidirectional bending fatigue; however its presence in carburised 83SAIS did not seem to influence the rotating bending fatigue strength. Carbide particles in globular and/or intergranular form were detrimental to compressive residual stresses; the unidirectional bending fatigue strength is markedly lowered. The highest fatigue strength was accomplished by vacuum carburising. The absence of internal oxidation was the key factor in the increased fatigue strength; the presence of uniformly distributed fine carbide particles did not upset the superior fatigue strength of vacuum carburised pieces. The effect of mean stress on the fatigue strength of carburised 63SA14 was studied. Increasing the mean stress as would be expected resulted in a decreased fatigue strength. Carburisation showed its advantages at low mean stress, but at high mean stress it offers little advantage over the uncarburised hardened conditions. Notch effect was also studied in unidirectional bending of carburised 080MlS. The general trend showed that the fatigue strength decreases with increasing the stress concentration factor. But different carburising conditions have different effect on notch sensitivity.

Determination of muscle fatigue in clinical practices using dynamically embedded signals

This paper explores a new method of analysing muscle fatigue within the muscles predominantly used during microsurgery. The captured electromyographic (EMG) data retrieved from these muscles are analysed for any defining patterns relating to muscle fatigue. The analysis consists of dynamically embedding the EMG signals from a single muscle channel into an embedded matrix. The muscle fatigue is determined by defining its entropy characterized by the singular values of the dynamically embedded (DE) matrix. The paper compares this new method with the traditional method of using mean frequency shifts in the EMG signal's power spectral density. Linear regressions are fitted to the results from both methods, and the coefficients of variation of both their slope and point of intercept are determined. It is shown that the complexity method is slightly more robust in that the coefficient of variation for the DE method has lower variability than the conventional method of mean frequency analysis.

Indigenous and foreign innovation efforts and drivers of technological upgrading:evidence from China

This paper explores the role of indigenous and foreign innovation efforts in technological upgrading in developing countries, taking into account sectoral specificities in technical change. Using a Chinese firm-level panel dataset covering 2001–05, the paper decomposes productivity growth into technical change and efficiency improvement and examines the impact of indigenous and foreign innovation efforts on these changes. Indigenous firms are found to be the leading force on the technological frontier in the low- and medium-technology industries, while foreign-invested firms enjoy a clear lead in the high-technology sector. Collective indigenous R&D activities at the industry level are found to be the major driver of technology upgrading of indigenous firms that push out the technology frontier. While foreign investment appears to contribute to static industry capabilities, R&D activities of foreign-invested firms have exerted a significant negative effect on the technical change of local firms over the sample period.

Customer equity drivers and future sales

Research on linking operational marketing inputs to customer attitudes and customer behavior has been gaining significance concomitant with the growing recognition that customers are market-based assets. In response to this, researchers and practitioners have proposed several conceptual models. Despite recent advances in research, the results are still inconclusive as to the relationship between customer attitude and future sales. A reason for this could be due to the paucity of studies combining survey-based data with behavioral data to understand better the drivers of customer behavior. With that in mind, the authors investigate the effects of customer perceptions of key marketing actions on customer attitudes and actual customer behavior as reflected by future sales. The authors propose that customer perceptions of value, brand, and relationship—“customer equity drivers”—affect loyalty intentions and future sales. The results of the study, which is based on a sample of 5694 customers of a large European do-it-yourself retailer, suggest that customer equity drivers can significantly predict future sales, even after the authors control for the current sales level.

Effect of fatigue on consumers' advertising processing

Huge advertising budgets are invested by firms to reach and convince potential consumers to buy their products. To optimize these investments, it is fundamental not only to ensure that appropriate consumers will be reached, but also that they will be in appropriate reception conditions. Marketing research has focused on the way consumers react to advertising, as well as on some individual and contextual factors that could mediate or moderate the ad impact on consumers (e.g. motivation and ability to process information or attitudes toward advertising). Nevertheless, a factor that potentially influences consumers’ advertising reactions has not yet been studied in marketing research: fatigue. Fatigue can yet impact key variables of advertising processing, such as cognitive resources availability (Lieury 2004). Fatigue is felt when the body warns to stop an activity (or inactivity) to have some rest, allowing the individual to compensate for fatigue effects. Dittner et al. (2004) defines it as “the state of weariness following a period of exertion, mental or physical, characterized by a decreased capacity for work and reduced efficiency to respond to stimuli.’’ It signals that resources will lack if we continue with the ongoing activity. According to Schmidtke (1969), fatigue leads to troubles in information reception, in perception, in coordination, in attention getting, in concentration and in thinking. In addition, for Markle (1984) fatigue generates a decrease in memory, and in communication ability, whereas it increases time reaction, and number of errors. Thus, fatigue may have large effects on advertising processing. We suggest that fatigue determines the level of available resources. Some research about consumer responses to advertising claim that complexity is a fundamental element to take into consideration. Complexity determines the cognitive efforts the consumer must provide to understand the message (Putrevu et al. 2004). Thus, we suggest that complexity determines the level of required resources. To study this complex question about need and provision of cognitive resources, we draw upon Resource Matching Theory. Anand and Sternthal (1989, 1990) are the first to state the Resource Matching principle, saying that an ad is most persuasive when the resources required to process it match the resources the viewer is willing and able to provide. They show that when the required resources exceed those available, the message is not entirely processed by the consumer. And when there are too many available resources comparing to those required, the viewer elaborates critical or unrelated thoughts. According to the Resource Matching theory, the level of resource demanded by an ad can be high or low, and is mostly determined by the ad’s layout (Peracchio and Myers-Levy, 1997). We manipulate the level of required resources using three levels of ad complexity (low – high – extremely high). On the other side, the resource availability of an ad viewer is determined by lots of contextual and individual variables. We manipulate the level of available resources using two levels of fatigue (low – high). Tired viewers want to limit the processing effort to minimal resource requirements by making heuristics, forming overall impression at first glance. It will be easier for them to decode the message when ads are very simple. On the contrary, the most effective ads for viewers who are not tired are complex enough to draw their attention and fully use their resources. They will use more analytical strategies, looking at the details of the ad. However, if ads are too complex, they will be too difficult to understand. The viewer will be discouraged to process information and will overlook the ad. The objective of our research is to study fatigue as a moderating variable of advertising information processing. We run two experimental studies to assess the effect of fatigue on visual strategies, comprehension, persuasion and memorization. In study 1, thirty-five undergraduate students enrolled in a marketing research course participated in the experiment. The experimental design is 2 (tiredness level: between subjects) x 3 (ad complexity level: within subjects). Participants were randomly assigned a schedule time (morning: 8-10 am or evening: 10-12 pm) to perform the experiment. We chose to test subjects at various moments of the day to obtain maximum variance in their fatigue level. We use Morningness / Eveningness tendency of participants (Horne & Ostberg, 1976) as a control variable. We assess fatigue level using subjective measures - questionnaire with fatigue scales - and objective measures - reaction time and number of errors. Regarding complexity levels, we have designed our own ads in order to keep aspects other than complexity equal. We ran a pretest using the Resource Demands scale (Keller and Bloch 1997) and by rating them on complexity like Morrison and Dainoff (1972) to check for our complexity manipulation. We found three significantly different levels. After having completed the fatigue scales, participants are asked to view the ads on a screen, while their eye movements are recorded by the eye-tracker. Eye-tracking allows us to find out patterns of visual attention (Pieters and Warlop 1999). We are then able to infer specific respondents’ visual strategies according to their level of fatigue. Comprehension is assessed with a comprehension test. We collect measures of attitude change for persuasion and measures of recall and recognition at various points of time for memorization. Once the effect of fatigue will be determined across the student population, it is interesting to account for individual differences in fatigue severity and perception. Therefore, we run study 2, which is similar to the previous one except for the design: time of day is now within-subjects and complexity becomes between-subjects

Indigenous and foreign innovation efforts and drivers of technological upgrading:evidence from China

This paper explores the drivers of technology upgrading in emerging economies using a recent Chinese firm-level panel dataset over the 2001-2005 period. It extends the Directed Technical Change theory by considering differences in technology intensities across industries within a country; examines the drivers of technical change, efficiency improvement and TFP growth in Chinese manufacturing firms; and explores the roles of indigenous innovations and foreign technology. It finds that FDI contributes to static industry capabilities by advanced technologies embedded in imported machineries, but not to dynamic technological capabilities of indigenous firms in developing countries. Collective indigenous R&D activities at industry level are the major driver of technology upgrading of indigenous firms that push up the technology frontier. Policy implications are discussed.

Perception of risk, feelings of vulnerability and effects on driving behaviour in women drivers across the lifespan.

Sustained driving in older age has implications for quality of life and mental health. Studies have shown that despite the recognised importance of driving in maintaining health and social engagement, many women give up driving prematurely or adopt self-imposed restrictive driving practices. Emotional responses to driving have been implicated in these decisions. This research examined the effect of risk perception and feelings of vulnerability on women’s driving behaviour across the lifespan. It also developed and tested a modified theory of planned behaviour intervention to positively affect driving habits. The first two studies (N=395) used quantitative analysis to model driving behaviours affected by risk perception and feelings of vulnerability, and established that feelings of vulnerability do indeed affect women’s driving behaviour, specifically resulting in increases in driving avoidance and the adoption of maladaptive driving styles. Further, that self-regulation, conceptualised as avoidance, is used by drivers across the lifespan. Qualitative analysis of focus group data (N=48) in the third study provided a deeper understanding of the variations in coping behaviours adopted by sub-groups of drivers and extended the definition of self-regulation to incorporate adaptive coping strategies. The next study (N=64) reported the construction and preliminary validation of the novel self-regulation index (SRI) to measure wider self-regulation behaviours using an objective measure of driving behaviour, a simulated driving task. The understanding gained from the formative research was used in the final study, an extended theory of planned behaviour intervention to promote wider self-regulation behaviour, measured using the previously validated self-regulation index. The intervention achieved moderate success with changes in affective attitude and normative beliefs as well as self-reported behaviour. The results offer promise for self-regulation, incorporating a spectrum of planning and coping behaviours, to be used as a mechanism to assist drivers in achieving their personal mobility goals whilst promoting safe driving.

Drivers of peak sales for pharmaceutical brands

Peak sales are an important metric in the pharmaceutical industry. Specifically, managers are focused on the height-of-peak-sales and the time required achieving peak sales. We analyze how order of entry and quality affect the level of peak sales and the time-to-peak-sales of pharmaceutical brands. We develop a growth model that includes these two variables as well as control variables for own and competitive marketing activities. We find that early entrants achieve peak sales later, and they have higher peak-sales levels. High-quality brands achieve peak sales earlier, and their peak-sales levels are higher. In addition, quality has a moderating effect on the order of entry effect on time-to-peak-sales. Our results indicate that late entrants have longer expected time-to-peak-sales when they introduce a brand with high quality.

Getting marketing back in the boardroom:understanding the drivers of marketing's influence within the firm

As many strategically important aspects of marketing are addressed by other functions in the organization, the decreased influence of the marketing department within companies is a topic of growing debate. In this study, the authors investigate this diminished influence and assess its determinants and consequences. They interviewed 25 marketing and finance executives from leading Dutch firms. They also conducted a large-scale Internet-based survey of several hundred marketing, finance, and general managers. Their results show that accountability and the innovativeness of the marketing department are the major drivers of the marketing department’s influence. They also demonstrate that a firm’s short-term orientation is negatively related to the influence of the marketing department. Marketing influence is positively related to market orientation, which is positively related to firm performance. Their results do not support prior findings of a direct positive link between marketing influence and firm performance, which might suggest that there is no need for a strong marketing department. The study suggests that an influential marketing department is relevant primarily when the firm is not market oriented. When firms are market oriented, a less influential marketing department does not lower their performance. Hence, it appears that they can choose to have an influential or noninfluential marketing department without any repercussions for their performance. Marketing activities could move to other functions. The authors suggest that marketing departments should aim to retain their influence. Dispersing marketing decision making among many functions can cause a lack of coordination; customers also lose their advocate within the firm. How can marketing departments regain their influence? The authors suggest two general solutions. First, marketing departments should become more accountable by linking marketing actions and policies with financial results. Marketers should become capable in analytics and finance. Second, they should become more innovative by increasing their share in new product or service concepts. They can do so by using their knowledge of the market and customers to contribute to new product or service development.