In situ synthesis and catalytic activity in CO oxidation of metal nanoparticles supported on porous nanocrystalline silicon

Reactive surface of mesoporous nanocrystalline silicon was used to synthesise noble metal nanoparticles via in situ reduction of the precursor salt solutions. The synthetic methodology for metal nanoparticle formation was systematically developed, and reaction conditions of metal salts reduction were optimised to prepare nanoparticles of controlled size distribution in the order 5–10 nm inside the mesoporous silicon template. CO oxidation was used as a test reaction for the synthesised Pt/porous silicon catalysts. Sharp reaction light-off was observed at about 120 °C on the optimised catalysts. The catalysts were shown to be stable in the extended steady-state runs and in the catalysts re-use experiments. Metal nanoparticles were shown to be stable to sintering at elevated temperatures up to 1000 °C. However, after thermal treatment on air, Pt nanoparticles were covered by a SiOx layer and were less active in CO oxidation.

Older adults with AMD as co-designers of an assistive mobile application

In the UK, 20% of people aged 75 years and over are living with sight loss and age-related macular degeneration (AMD) is the most common cause of sight loss in the UK, impacting nearly 10% of those over 80; regrettably, these fgures are expected to increase in coming decades as the population ages (RNIB, 2012). This paper reports on the authors' design activities conducted for the purpose of informing the development of an assistive self-monitoring, ability-reactive technology (SMART) for older adults with AMD. The authors refect on their experience of adopting and adapting the PICTIVE (Plastic Interface for Collaborative Technology Initiatives through Video Exploration) participatory design approach (Muller, 1992) to support effective design with and for their special needs user group, refect on participants' views of being part of the process, and discuss the design themes identifed via their PD activities.

Multiple roles for executive control in belief-desire reasoning:distinct neural networks are recruited for self perspective inhibition and complexity of reasoning

Belief-desire reasoning is a core component of 'Theory of Mind' (ToM), which can be used to explain and predict the behaviour of agents. Neuroimaging studies reliably identify a network of brain regions comprising a 'standard' network for ToM, including temporoparietal junction and medial prefrontal cortex. Whilst considerable experimental evidence suggests that executive control (EC) may support a functioning ToM, co-ordination of neural systems for ToM and EC is poorly understood. We report here use of a novel task in which psychologically relevant ToM parameters (true versus false belief; approach versus avoidance desire) were manipulated orthogonally. The valence of these parameters not only modulated brain activity in the 'standard' ToM network but also in EC regions. Varying the valence of both beliefs and desires recruits anterior cingulate cortex, suggesting a shared inhibitory component associated with negatively valenced mental state concepts. Varying the valence of beliefs additionally draws on ventrolateral prefrontal cortex, reflecting the need to inhibit self perspective. These data provide the first evidence that separate functional and neural systems for EC may be recruited in the service of different aspects of ToM.

Developing intrinsically motivated information systems - a critical systems approach

This paper deals with the problematic of development methodologies for organisational information systems and especially with their application to business systems. Historically, information systems development methodologies tend to fail, because either they take the organisational purposefulness for granted, or they do not analyse it thoroughly. This paper's position is that the analysis, and the definition or redefinition of the systemic purpose are regarded as the utmost expression of the system 's purposefulness. This is to be achieved by ensuring the participation of all the stakeholders who affect, or are affected by, a particular business system's operations. The nature of participation, defined as a process of the stakeholders' perceptual exchanges, is deemed to be problematic in itself, due to the influence exerted upon it by organisational power, coercion and false consciousness. The paper highlights the philosophical reasons for the failures of information systems development methodologies, and provides a conceptual solution to this problematic as well as a strategy for the development of intrinsically motivated organisational information systems. The intrinsically motivated information systems methodology outlined here (BSPA) is intended to yield organisational information systems that demonstrably improve co-ordination of organisational activities, by enabling the development and maintenance of a single/multifaceted view of purpose throughout organisations.

International technology collaboration for new product development

In recent years it has become increasingly common for companies to improve their competitiveness and find new markets by extending their operations through international new product development collaborations involving technology transfer. Technology development, cost reduction and market penetration are seen as the foci in such collaborative operations with the aim being to improve the competitive position of both partners. In this paper the case of technology transfer through collaborative new product development in the machine tool sector is used to provide a typical example of such partnerships. The research evidence on which the paper is based includes longitudinal case studies and questionnaire surveys of machine tool manufacturers in both countries. The specific case of a UK machine tool company and its Chinese partner is used to provide a specific example of the operational development of a successful collaboration. The paper concludes that a phased co-ordination of commercial, technical and strategic interactions between the two partners is essential for such collaborations to work. In particular, the need to transfer marketing know-how is emphasised, having been identified as an area of weakness among technology acquirers in China.

Selective localization of organoclay and effects on the morphology and mechanical properties of LDPE/PA11 blends with distributed and co-continuous morphology

A study was made on the effect of small amounts of organically modified clay on the morphology and mechanical properties of blends of low-density polyethylene and polyamide 11 at different compositions. The influence of the filler on the blend morphology was investigated using wide angle X-ray diffractometry, scanning and transmission electron microscopy and selective extraction experiments. The filler was found to locate predominantly in the more hydrophilic polyamide phase. Although such uneven distribution does not have a significant effect on the onset of phase co-continuity of the polymer components, it brings about a drastic refinement of the microstructure for the blends both with droplets/matrix and co-continuous morphologies. In addition to the expected reinforcing action of the filler, the resulting fine microstructure plays an important role in enhancing the mechanical properties of the blends. This is essentially because of a good quality of stress transfer across the interface between the constituents, which also seems to benefit for a good interfacial adhesion promoted by the filler. Our results provide the experimental evidence for the capabilities of nanoparticles added to multiphase polymer systems to act selectively as a reinforcing agent for specific domains of the material and as a medium able to assist the refinement of the polymer phases during mixing.

Design and development of agent-based procurement system to enhance business intelligence

The purpose of this research is to propose a procurement system across other disciplines and retrieved information with relevant parties so as to have a better co-ordination between supply and demand sides. This paper demonstrates how to analyze the data with an agent-based procurement system (APS) to re-engineer and improve the existing procurement process. The intelligence agents take the responsibility of searching the potential suppliers, negotiation with the short-listed suppliers and evaluating the performance of suppliers based on the selection criteria with mathematical model. Manufacturing firms and trading companies spend more than half of their sales dollar in the purchase of raw material and components. Efficient data collection with high accuracy is one of the key success factors to generate quality procurement which is to purchasing right material at right quality from right suppliers. In general, the enterprises spend a significant amount of resources on data collection and storage, but too little on facilitating data analysis and sharing. To validate the feasibility of the approach, a case study on a manufacturing small and medium-sized enterprise (SME) has been conducted. APS supports the data and information analyzing technique to facilitate the decision making such that the agent can enhance the negotiation and suppler evaluation efficiency by saving time and cost.

The professional role of breast cancer nurses in multi-disciplinary breast cancer care teams

Since the 1970s breast cancer services have witnessed considerable changes in the management of patients. One significant change was the introduction of specialist core personnel, including the breast care nurse (BCN). The role of the BCN has been gaining credence rapidly in the British NHS and this service is perhaps the paradigm of care for other services. With the lack of specific evidence of the role of specialist nurses in the breast care team, the current study aims to explore this area by in-depth interviews with core team members, and observations of 16 multi-disciplinary teams in England. The study explores the following themes: Nurses' unique informal management leadership role in ensuring the co-ordination, communication and planning of the team work; nurses' innovatory role in making the bureaucracy respond to patients and their relatives needs; nurses supportive role in the provision of expert advice and guidance to other members of the team; nurses confidence and humour in well-performing teams; and the limitations of the professional role of the breast cancer nurse. This study indicates that there is evidence that the BCN is practicing at an advanced level of practice. However, there is a severe lack of evidence-based description of that advanced practice. Cancer nurses including the BCNs should develop and participate in programmes of research in line with cancer legislation in order to build an evidence base that ultimately supports their unique role. © 2004 Elsevier Ltd. All rights reserved.

Interlamellar modification of smectite clays

Clay minerals, both natural and synthetic, have a wide range of applications. Smectite clays are not true insulators, their slight conductivity has been utilized by the paper industry in the development of mildly conducting paper. In particular, the synthetic hectorite clay, laponite, is employed to produce paper which is used in automated drawing offices where electro graphic printing is common. The primary objective of this thesis was to modify smectite clays, particularly laponite, to achieve enhanced conductivity. The primary objective was more readily achieved if the subsidiary objective of understanding the mechanism of conductivity was defined. The cyclic voltammograms of some cobalt complexes were studied in free solution and as clay modified electrodes to investigate the origin of electroactivity in clay modified electrodes. The electroactivity of clay modified electrodes prepared using our method can be attributed to ion pairs sorbed to the surface of the electrode, in excess of the cationic exchange capacity. However, some new observations were made concerning the co-ordination chemistry of the tri-2-pyridylamine complexes used which needed clarification. The a.c. conductivity of pressed discs of laponite RD was studied over the frequency range 12Hz- 100kHz using three electrode systems namely silver-loaded epoxy resin (paste), stainless-steel and aluminium. The a. c. conductivity of laponite consists of two components, reactive (minor) and ionic (major) which can be observed almost independently by utilizing the different electrode systems. When the temperature is increased the conductivity of laponite increases and the activation energy for conductivity can be calculated. Measurement of the conductivity of thin films of laponite RD in two crystal planes shows a degree of anisotropy in the a.c. conductivity. Powder X-ray diffraction and 119Sn Mossbauer spectroscopy studies have shown that attempts to intercalate some phenyltin compounds into laponite RD under ambient conditions result in the formation of tin(IV) oxide pillars. 119Sn Mossbauer data indicate that the order of effectiveness of conversion to pillars is in the order: Ph3SnCl > (Ph3Sn)2O, Ph2SnCl2 The organic product of the pillaring process was identified by 13C m.a.s.n.m.r. spectroscopy as trapped in the pillared lattice. This pillaring reaction is much more rapid when carried out in Teflon containers in a simple domestic microwave oven. These pillared clays are novel materials since the pillaring is achieved via neutral precursors rather than sacrificial reaction of the exchangeable cation. The pillaring reaction depends on electrophilic attack on the aryl tin bond by Brønsted acid sites within the clay. Two methods of interlamellar modification were identified which lead to enhanced conductivity of laponite, namely ion exchange and tin(IV) oxide pillaring. A monoionic potassium exchanged laponite shows a four fold increase in a.c. conductivity compared to sodium exchanged laponite RD. The increased conductivity is due to the appearence of an ionic component. The conductivity is independent of relative humidity and increases with temperature. Tin(IV) oxide pillared laponite RD samples show a significant increase in conductivity. Samples prepared from Ph2SnCl2 show an increase in excess of an order of magnitude. The conductivity of tin(IV) oxide pillared laponite samples is dominated by an ionic component.

A co-ordinated business object approach for supporting tactical level management decisions

The proliferation of data throughout the strategic, tactical and operational areas within many organisations, has provided a need for the decision maker to be presented with structured information that is appropriate for achieving allocated tasks. However, despite this abundance of data, managers at all levels in the organisation commonly encounter a condition of ‘information overload’, that results in a paucity of the correct information. Specifically, this thesis will focus upon the tactical domain within the organisation and the information needs of management who reside at this level. In doing so, it will argue that the link between decision making at the tactical level in the organisation, and low-level transaction processing data, should be through a common object model that used a framework based upon knowledge leveraged from co-ordination theory. In order to achieve this, the Co-ordinated Business Object Model (CBOM) was created. Detailing a two-tier framework, the first tier models data based upon four interactive object models, namely, processes, activities, resources and actors. The second tier analyses the data captured by the four object models, and returns information that can be used to support tactical decision making. In addition, the Co-ordinated Business Object Support System (CBOSS), is a prototype tool that has been developed in order to both support the CBOM implementation, and to also demonstrate the functionality of the CBOM as a modelling approach for supporting tactical management decision making. Containing a graphical user interface, the system’s functionality allows the user to create and explore alternative implementations of an identified tactical level process. In order to validate the CBOM, three verification tests have been completed. The results provide evidence that the CBOM framework helps bridge the gap between low level transaction data, and the information that is used to support tactical level decision making.

University-industry-relations - their role in technological innovation:the case of biotechnology in the UK

Biotechnology is one of a series of new `generic technologies' that have been identified by western governments as possessing stategic economic opportunities. In this thesis I examine the characteristics of the technology and the government policies that have been developed to both promote and exploit the underpinning scientific research for biotechnology. The approach I have taken involves an in-depth analysis of the role of university-industry research relations in the development of biotechnology. To this end I carried out a detailed survey of biotechnology companies in the UK on the nature of their interactions and objectives. Through individual case studies of the SERC and DTI club mechanisms in biotechnology, I provide a contemporary appraisal of the development of new mechanisms involving co-ordination and cooperation between industry, government and academia, established to couple state funded science and national economic development. The public policy implications of the club funding systems for science in the UK are examined.

The neurotoxicity of acrylamide

The experiments described in this thesis compared conventional methods of screening for neurotoxins with potential electrophysiological and pharmacological tests in an attempt to improve the sensitivity of detection of progressive distal neuropathy. Adult male albino mice were dosed orally with the neurotoxicant acylamide and subjected to a test of limb strength and co-ordination and a functional observational battery. These methods established a no observable effect level of 10 mg/kg. A dose of 200 mg/kg resulted in abnormalities of gait and reduced limb strength and/or co-ordination. Analysis of the in vitro 'jitter' of the latency of trains of action potentials evoked at a frequency of 30 Hz in the mouse phrenic nerve/hemidiaphragm preparation showed this technique to be unsuitable for detection of the early phases of acrylamide induced peripheral neuropathy (l00 mg/kg). The evoked and spontaneous twitch responses of the hemidiaphragm preparation following in vitro exposure to the organophosphorous anticholinesterase compound ecothiopate were altered by in vivo pre treatment with acrylamide. Acrylamide caused an increase in the time course of the potentiation of stimulated twitches and a decrease in the maximum potentiation. Spontaneous twitches were reduced in amplitude and frequency. These effects occurred at an acrylamide dose level insufficient to cause clinical signs of neuropathy. Investigations into the mechanisms underlying these observations yielded the following observations. Analysis of miniature endplate potentials at this dose level indicated prolongation of the life of acetylcholine in the synaptic cleft but the implied decrease in cholinesterase activity could not be demonstrated biochemically or histologically. The electrical excitability of the nerve terminal region of phrenic motor nerves was reduced following acrylamide although a possible compromise of antidromic action potential conduction could not be confirmed. There was no histopathological evidence of neuropathy at this dose level. Further exploration of this phenomenon is desirable in order to ascertain whether the effect is specific to acrylamide and/or ecothiopate and to elucidate the mechanisms behind these novel observations.

Computer integrated manufacturing (CIM) and the principle of business control

In response to the increasing international competitiveness, many manufacturing businesses are rethinking their management strategies and philosophies towards achieving a computer integrated environment. The explosive growth in Advanced Manufacturing Technology (AMI) has resulted in the formation of functional "Islands of Automation" such as Computer Aided Design (CAD), Computer Aided Manufacturing (CAM), Computer Aided Process Planning (CAPP) and Manufacturing Resources Planning (MRPII). This has resulted in an environment which has focussed areas of excellence and poor overall efficiency, co-ordination and control. The main role of Computer Integrated Manufacturing (CIM) is to integrate these islands of automation and develop a totally integrated and controlled environment. However, the various perceptions of CIM, although developing, remain focussed on a very narrow integration scope and have consequently resulted in mere linked islands of automation with little improvement in overall co-ordination and control. This thesis, that is the research described within, develops and examines a more holistic view of CIM, which is based on the integration of various business elements. One particular business element, namely control, has been shown to have a multi-facetted and underpinning relationship with the CIM philosophy. This relationship impacts various CIM system design aspects including the CIM business analysis and modelling technique, the specification of systems integration requirements, the CIM system architectural form and the degree of business redesign. The research findings show that fundamental changes to CIM system design are required; these are incorporated in a generic CIM design methodology. The affect and influence of this holistic view of CIM on a manufacturing business has been evaluated through various industrial case study applications. Based on the evidence obtained, it has been concluded that this holistic, control based approach to CIM can provide a greatly improved means of achieving a totally integrated and controlled business environment. This generic CIM methodology will therefore make a significant contribution to the planning, modelling, design and development of future CIM systems.

The discourse of biology lectures : aspects of its mode and text structure

The present thesis investigates mode related aspects in biology lecture discourse and attempts to identify the position of this variety along the spontaneous spoken versus planned written language continuum. Nine lectures (of 43,000 words) consisting of three sets of three lectures each, given by the three lecturers at Aston University, make up the corpus. The indeterminacy of the results obtained from the investigation of grammatical complexity as measured in subordination motivates the need to take the analysis beyond sentence level to the study of mode related aspects in the use of sentence-initial connectives, sub-topic shifting and paraphrase. It is found that biology lecture discourse combines features typical of speech and writing at sentence as well as discourse level: thus, subordination is more used than co-ordination, but one degree complexity sentence is favoured; some sentence initial connectives are only found in uses typical of spoken language but sub-topic shift signalling (generally introduced by a connective) typical of planned written language is a major feature of the lectures; syntactic and lexical revision and repetition, interrupted structures are found in the sub-topic shift signalling utterance and paraphrase, but the text is also amenable to analysis into sentence like units. On the other hand, it is also found that: (1) while there are some differences in the use of a given feature, inter-speaker variation is on the whole not significant; (2) mode related aspects are often motivated by the didactic function of the variety; and (3) the structuring of the text follows a sequencing whose boundaries are marked by sub-topic shifting and the summary paraphrase. This study enables us to draw four theoretical conclusions: (1) mode related aspects cannot be approached as a simple dichotomy since a combination of aspects of both speech and writing are found in a given feature. It is necessary to go to the level of textual features to identify mode related aspects; (2) homogeneity is dominant in this sample of lectures which suggests that there is a high level of standardization in this variety; (3) the didactic function of the variety is manifested in some mode related aspects; (4) the features studied play a role in the structuring of the text.

The political shaping of energy technology:combined heat and power in Britain

There has been negligible adoption of combined heat and power (CHP) for district heating (DH) in Britain, despite continued advocacy. This thesis constructs an account of the treatment of the option, and devises a framework for explanation. Analysis of technological development and adoption, it is argued, should be similar to that of other social processes, and be subject to the same requirements and criticisms. They will, however, show features peculiar to the institutions developing and selecting technologies, their relation to different social groups, and the forms of knowledge in and about technology. Conventional approaches - organisation and interorganisation theories, and analyses of policy-making - give useful insights but have common limitations. Elements of an analytical framework situating detailed issues and outcomes in a structured historical context are derived from convergent radical critiques. Thus activity on CHP/DH is essentially shaped by the development and relations of energy sector institutions: central and local government, nationalised industries and particularly the electricity industry. Analysis of them is related to the specific character of the British state. A few CHP and DH installations were tried before 1940. During postwar reconstruction, extensive plans for several cities were abandoned or curtailed. In the 1960s and 70s, many small non-CHP DH schemes were installed on housing estates. From the mid-70s, the national potential of CHP/DH has been reappraised, with widespread support and favourable evaluations, but little practical progress. Significant CHP/DH adoption is shown to have been systematically excluded ultimately by the structure of energy provision; centralised production interests dominate and co-ordination is weak. Marginal economics and political commitment have allowed limited development in exceptional circumstances. Periods of upheaval provided greater opportunity and incentive for CHP/DH but restructuring eventually obstructed it. Explanation of these outcomes is shown to require analysis at several levels, from broad context to detailed action.