Cascaded Bayesian processes: an account of bias in orientation perception

Following adaptation to an oriented (1-d) signal in central vision, the orientation of subsequently viewed test signals may appear repelled away from or attracted towards the adapting orientation. Small angular differences between the adaptor and test yield 'repulsive' shifts, while large angular differences yield 'attractive' shifts. In peripheral vision, however, both small and large angular differences yield repulsive shifts. To account for these tilt after-effects (TAEs), a cascaded model of orientation estimation that is optimized using hierarchical Bayesian methods is proposed. The model accounts for orientation bias through adaptation-induced losses in information that arise because of signal uncertainties and neural constraints placed upon the propagation of visual information. Repulsive (direct) TAEs arise at early stages of visual processing from adaptation of orientation-selective units with peak sensitivity at the orientation of the adaptor (theta). Attractive (indirect) TAEs result from adaptation of second-stage units with peak sensitivity at theta and theta+90 degrees , which arise from an efficient stage of linear compression that pools across the responses of the first-stage orientation-selective units. A spatial orientation vector is estimated from the transformed oriented unit responses. The change from attractive to repulsive TAEs in peripheral vision can be explained by the differing harmonic biases resulting from constraints on signal power (in central vision) versus signal uncertainties in orientation (in peripheral vision). The proposed model is consistent with recent work by computational neuroscientists in supposing that visual bias reflects the adjustment of a rational system in the light of uncertain signals and system constraints.

Technological and organisational change in small- to medium-sized manufacturing companies:a learning organisation perspective

This paper examines the extent to which a learning organisation perspective is attainable in small- to medium-sized manufacturing companies. An audit tool is developed from the literature on organisational learning and recognised processes that lead towards becoming a learning organisation. The paper focuses on the application of the audit tool in three UK automotive component suppliers which are all experiencing pressures for change imposed by the major vehicle manufacturers. The main changes are concerned with tiering of the supply chain and substantial delegation of responsibilities to component suppliers including an increasing emphasis on innovation and continuous improvement. The companies presented in the paper are taken from a research project into the impact of changes in supply chain relationships on the operation of small- and medium-sized manufacturing firms in the West Midlands region of the UK. The ways in which the companies are responding to change are presented together with the results of a self-assessment using the developed audit tool. These results suggest that companies of this type tend to focus on change in those areas that involve least challenge to the established power and authority of management.

Business processes and knowledge management

Knowledge has been a subject of interest and inquiry for thousands of years since at least the time of the ancient Greeks, and no doubt even before that. “What is knowledge” continues to be an important topic of discussion in philosophy. More recently, interest in managing knowledge has grown in step with the perception that increasingly we live in a knowledge-based economy. Drucker (1969) is usually credited as being the first to popularize the knowledge-based economy concept by linking the importance of knowledge with rapid technological change in Drucker (1969). Karl Wiig coined the term knowledge management (hereafter KM) for a NATO seminar in 1986, and its popularity took off following the publication of Nonaka and Takeuchi’s book “The Knowledge Creating Company” (Nonaka & Takeuchi, 1995). Knowledge creation is in fact just one of many activities involved in KM. Others include sharing, retaining, refining, and using knowledge. There are many such lists of activities (Holsapple & Joshi, 2000; Probst, Raub, & Romhardt, 1999; Skyrme, 1999; Wiig, De Hoog, & Van der Spek, 1997). Both academic and practical interest in KM has continued to increase throughout the last decade. In this article, first the different types of knowledge are outlined, then comes a discussion of various routes by which knowledge management can be implemented, advocating a process-based route. An explanation follows of how people, processes, and technology need to fit together for effective KM, and some examples of this route in use are given. Finally, there is a look towards the future.

Twelve steps to heaven:successfully managing change through developing innovative teams

In this article we propose that work teams implement many of the innovative changes required to enable organizations to respond appropriately to the external environment. We describe how, using an input?–?process?–?output model, we can identify the key elements necessary for developing team innovation. We propose that it is the implementation of ideas rather than their development that is crucial for enabling organizational change. Drawing on theory and relevant research, 12 steps to developing innovative teams are described covering key aspects of the team task, team composition, organizational context, and team processes.

Perceptions of technological change : the attitude of managers towards group technology in the United States food equipment industry

In the center of today's continued and rapid technological change and ever competitive environment of the next millennium, manufacturers must realize that unless they are ready to consider and evaluate new technologies brought onto them, they may fail to adequately respond to the challenges that lie ahead of them. This research was designed to determine the consistency of the perceptions of technical and non-technical administrators, in manufacturing environment, towards technological change and group technology as an advanced manufacturing system. This research has included a review of literature with references to technological change, justification and implementation processes, and various manufacturing systems including group technology and its benefits. This research has used the research method of empirical analysis (quantitative) and case studies (qualitative) to research perceptions of technical and non-technical administrators towards technological change and group technology. Sixty-four (64) technical and fifty-one (51) nontechnical administrators from fifty (50) manufacturing organizations in the United States of America responded to the mail survey questionnaire used in this research. Responses were analyzed using the Repeated Measures ANOVA procedure to compare mean responses of each group. Two correlation analyses, Cronback Coefficient Alpha and Pearson Correlation Coefficient, were also performed to determine the reliability of the questionnaire as well as the degree of correlation of perceptions between these two groups. This research, through the empirical analysis, has found that perceptions of the technical and non-technical administrators towards group technology were not consistent. In other words, they did not perceive the benefits of group technology in the same manner to the overall organizational performance. This finding was significant since it provided the first clear and comprehensive view of the technical and non-technical administrators' perception towards group technology and technological change, in Food Equipment Manufacturer Industry, in United States of America. In addition, a number of cases were analyzed and the results have supported those of the quantitative analysis. Therefore, this research not only has provided basic data, which was unavailable prior to this investigation, but it also provided a basis for future studies.

An institutional perspective on management accounting change in the public sector : a case study from Canada

This thesis reports on a four-year field study conducted at the Saskatchewan regional office of the Department of Indian Affairs and Northern Development, a large department of the Government of Canada. Over the course of the study, a sweeping government-wide accounting reform took place entitled the Financial Information Strategy. An ethnographic study was conducted that documented the management accounting processes in place at the regional office prior to the Financial Information Strategy reform, the organization’s adoption of the new accounting system associated with this initiative, and the state of the organization’s management accounting system once the implementation was complete. This research, therefore, captures in detail a management accounting change process in a public sector organization. This study employs an interpretive perspective and draws on institution theory as a theoretical framework. The concept of loose coupling and insights from the literature on professions were also employed in the explanation-building process for the case. This research contributes to institution theory and the study of management accounting change by recognizing conflicting institutional forces at the organizational level. An existing Old Institutional Economics-based conceptual framework for management accounting change is advanced and improved upon through the development of a new conceptual framework that incorporates the influence of wider institutional forces, the concepts of open and closed organizational systems and loose coupling, and the recognition of varying rates of change and institutionalization of organizational activity sets. Our understanding of loose coupling is enhanced by the interpretation of institutional influences developed in this study as is the role of professionalization as a normative influence in public sector organizations.

The process of strategic change:a management perspective

This thesis is concerned with the management processes concerned with complex strategic decision in organisations. The research has sought to explore these processes by taking as its focus the reconstruction of decision processes a) on the basis of an historical study of an industry and in particular a major company in that industry; and b) the perception and understanding of strategic decision processes and change by managers involved in companies in that industry. The main body of analysis and theoretical contributions arise from the detailed analysis of extended depth interviews with managers carried out in 1980 and 1983 which trace thirteen years of the strategic development of a firm. In so doing, extensive use is made of verbatim accounts by managers of events and their interpretation of events. This is then compared with data gathered from.similar interviews with managers of two other companies and examined in the light of existing research and theory in the field. The thesis both provides a detailed insight into the processes associated with the identification and resolution of complex strategic issues and also generates a body of theory concerning the mechanisms by which strategic decisions and the processes of strategic change are interwoven with the cultural and political fabric of organisations. The thesis is divided into four parts. The first part deals with the background to the research, provid1ng a fuller summary of the purpose, structure and content of the thesis and a discussion of relevant previous research and the methodology employed herein. The second part mainly provides case studies of the industry and the main company studied. The third part is a detailed presentation and analysis of data. The fourth part is a synthesis of the findings and consolidation of the theoretical interpretation advanced in the thesis.

Task classification and decision processes in monitoring behaviour

Task classification is introduced as a method for the evaluation of monitoring behaviour in different task situations. On the basis of an analysis of different monitoring tasks, a task classification system comprising four task 'dimensions' is proposed. The perceptual speed and flexibility of closure categories, which are identified with signal discrimination type, comprise the principal dimension in this taxonomy, the others being sense modality, the time course of events, and source complexity. It is also proposed that decision theory provides the most complete method for the analysis of performance in monitoring tasks. Several different aspects of decision theory in relation to monitoring behaviour are described. A method is also outlined whereby both accuracy and latency measures of performance may be analysed within the same decision theory framework. Eight experiments and an organizational study are reported. The results show that a distinction can be made between the perceptual efficiency (sensitivity) of a monitor and his criterial level of response, and that in most monitoring situations, there is no decrement in efficiency over the work period, but an increase in the strictness of the response criterion. The range of tasks exhibiting either or both of these performance trends can be specified within the task classification system. In particular, it is shown that a sensitivity decrement is only obtained for 'speed' tasks with a high stimulation rate. A distinctive feature of 'speed' tasks is that target detection requires the discrimination of a change in a stimulus relative to preceding stimuli, whereas in 'closure' tasks, the information required for the discrimination of targets is presented at the same point In time. In the final study, the specification of tasks yielding sensitivity decrements is shown to be consistent with a task classification analysis of the monitoring literature. It is also demonstrated that the signal type dimension has a major influence on the consistency of individual differences in performance in different tasks. The results provide an empirical validation for the 'speed' and 'closure' categories, and suggest that individual differences are not completely task specific but are dependent on the demands common to different tasks. Task classification is therefore shovn to enable improved generalizations to be made of the factors affecting 1) performance trends over time, and 2) the consistencv of performance in different tasks. A decision theory analysis of response latencies is shown to support the view that criterion shifts are obtained in some tasks, while sensitivity shifts are obtained in others. The results of a psychophysiological study also suggest that evoked potential latency measures may provide temporal correlates of criterion shifts in monitoring tasks. Among other results, the finding that the latencies of negative responses do not increase over time is taken to invalidate arousal-based theories of performance trends over a work period. An interpretation in terms of expectancy, however, provides a more reliable explanation of criterion shifts. Although the mechanisms underlying the sensitivity decrement are not completely clear, the results rule out 'unitary' theories such as observing response and coupling theory. It is suggested that an interpretation in terms of the memory data limitations on information processing provides the most parsimonious explanation of all the results in the literature relating to sensitivity decrement. Task classification therefore enables the refinement and selection of theories of monitoring behaviour in terms of their reliability in generalizing predictions to a wide range of tasks. It is thus concluded that task classification and decision theory provide a reliable basis for the assessment and analysis of monitoring behaviour in different task situations.

Technical change and work organisation

This thesis is an exploration of the social and political processes involved in the introduction of new technology to the shopfloor. Through a series of case studies of applications of microelectronics to batch manufacture, it attempts to uncover the ways in which the values and interests of managers, engineers, workers and others profoundly influence the choice and use of technology, and thus the work organisation which emerges. Previous analyses have tended to treat new technology as if it had "impacts" on work organisation - especially skills - which are inevitable in particular technical and economic circumstances. It is in opposition to this view that technical change is here treated as a matter for social choice and political negotiation, the various interested parties to the change being shown to attempt to incorporate their own interests into the technical and social organisation of work. Section one provides the relevant background to the case studies by summarising and criticising previous theoretical and empirical work in the area. The inadequacies of this work for our concerns are drawn out, and the need for detailed studies of the political aspects of technical change is justified. The case studies are presented in section two as a set of "episodes" of innovation, and section three analyses the empirical findings. The innovations are compared and contrasted in order to illustrate the social and political dynamics involved in the various stages of the innovation process. Finally some comments are made on policy issues for which the research has important implications.

Change in third sector organisations: the impact of European Union funding in cross-national perspectives

This is a study of third sector organisations and organisational change resulting from European Union funding. While there is a growing body of research which shows how governmental funding can contribute to the organisational challenges that third sector organisations encounter, research on how European Union funding affects third sector organisations is limited. This thesis contributes towards closing this gap in knowledge by identifying a number of organisational changes which can be attributed to the use of European Union funding. A qualitative approach was taken to explore organisational change resulting from the use of URBAN II funding in nine third sector organisations which were studied in the context of the URBAN II programmes of Belfast, Berlin and Bristol. The conceptual framework for this study draws on organisation theory and resource dependence theory, together with concepts of co-production and multi-level governance. URBAN II funding was found to have affected organisational structures, processes, services, goals and participants, as well as the interactions of organisations with their external environment. In contrast to earlier research however, the findings from this study suggest that many of these organisational changes improved the capacity of third sector organisations to carry out their work. The cross-national comparison of the findings further showed that organisational impacts resulting from the use of URBAN II funding can vary significantly between different countries. Programme Managers were found to have played a critically important' role in enabling third sector organisations to obtain benefits from URBAN II funding. Many positive organisational changes arose from a close collaboration between Programme Managers and third sector organisations. Conversely, many negative organisational impacts were found to be due, not to the regulations associated with European funding, but primarily to the approach adopted by the Programme Managers and Local Development Partnerships towards engaging third sector organisations in programme delivery.

Strategic practices:an activity theory perspective on continuity and change

This paper draws upon activity theory- to analyse an empirical investigation of the micro practices of strategy in three UK universities. Activity theory provides a framework of four interactive components from which strategy emerges; the collective structures of the organization, the primary actors, in this research conceptualized as the top management team (TMT), the practical activities in which they interact and the strategic practices through which interaction is conducted. Using this framework, the paper focuses specifically on the formal strategic practices involved in direction setting, resource allocation, and monitoring and control. These strategic practices arc associated with continuity of strategic activity in one case study but are involved in the reinterpretation and change of strategic activity in the other two cases. We model this finding into activity theory-based typologies of the cases that illustrate the way that practices either distribute shared interpretations or mediate between contested interpretations of strategic activity. The typologies explain the relationships between strategic practices and continuity and change of strategy as practice. The paper concludes by linking activity theory to wider change literatures to illustrate its potential as an integrative methodological framework for examining the subjective and emergent processes through which strategic activity is constructed. © Blackwell Publishing Ltd 2003.

Minority influence and innovation:antecedents, processes and consequences

Social groups form an important part of our daily lives. Within these groups pressures exist which encourage the individual to comply with the group’s viewpoint. This influence, which creates social conformity, is known as ‘majority influence’ and is the dominant process of social control. However, there also exists a ‘minority influence’, which emerges from a small subsection of the group and is a dynamic force for social change. Minority Influence and Innovation seeks to identify the conditions under which minority influence can prevail, to change established norms, stimulate original thinking and help us to see the world in new ways. With chapters written by a range of expert contributors, areas of discussion include: •processes and theoretical issues •the factors which affect majority and minority influence •interactions between majority and minority group members This book offers a thorough evaluation of the most important current developments within this field and presents consideration of the issues that will be at the forefront of future research. As such it will be of interest to theorists and practitioners working in social psychology. This book offers a thorough evaluation of the most important current developments within this field and presents consideration of the issues that will be at the forefront of future research. As such it will be of interest to theorists and practitioners working in social psychology.

Agents for change and changed agents:the micro-politics of change and feminism in the academy

This article explores gender politics and processes in the academy and investigates change from the perspectives of feminist academics. In particular, it explores the experiences of women academics attempting to effect change to the gendered status quo of their own institutions. Focusing on micro-politics, the feminist movement is empirically explored in localized spaces of resistance and in the small but significant individual efforts at making changes in academic institutions. The analysis is based on interviews with female academics working in business and management schools and focuses on the challenges for change and how change attempts affect their personal and professional identities. The article explores the range of change strategies that participants use as they try to progress in their academic career while staying true to their feminist values and priorities through both resisting and incorporating dominant discourses of academic work. The analysis highlights such tensions and focuses on a contextualized, bottom-up perspective on change that, unlike more totalizing theorization, takes into account mundane and lived experiences at the level of the individual. © 2012 Blackwell Publishing Ltd.

Modelling e-business processes:a component-based simulation approach

With new and emerging e-business technologies to transform business processes, it is important to understand how those technologies will affect the performance of a business. Will the overall business process be cheaper, faster and more accurate or will a sub-optimal change have been implemented? The use of simulation to model the behaviour of business processes is well established, and it has been applied to e-business processes to understand their performance in terms of measures such as lead-time, cost and responsiveness. This paper introduces the concept of simulation components that enable simulation models of e-business processes to be built quickly from generic e-business templates. The paper demonstrates how these components were devised, as well as the results from their application through case studies.

Place-renewing leadership:trajectories of change for mature manufacturing regions in Europe

The forces of globalisation now impacting on local economies pose threats to the existing paradigm of competences and routines, yet simultaneously offer opportunities to integrate new knowledge and learning. This is particularly pertinent with respect to Europe’s ‘mature regions’, which are undergoing a major economic restructuring by trying to shift from traditional manufacturing activities to hybrid activities that comprise a combination of manufacturing and a higher component of intangible inputs and related knowledge service activities. The objective of the article is to discuss the concept of ‘place leadership’ by looking at how the embedded skills, knowledge and cumulated learning of a place can be used by its institutional infrastructure to identify sustainable growth trajectories. In other words, its aim is to explore how the economic, social, institutional and cultural aspects of places shape the opportunities for upgrading and renovation drawing upon their historical specialisation. The conceptual contribution of the article draws on two case studies, in the West Midlands, UK and in Prato, Tuscany, where we study the processes of decision-making, forms of leadership and ultimately the nature of local leadership.