Practice based learning for automotive engineering design students

The automotive industry combines a multitude of professionals to develop a modern car successfully. Within the design and development teams the collaboration and interface between Engineers and Designers is critical to ensure design intent is communicated and maintained throughout the development process. This study highlights recent industry practice with the emergence of Concept Engineers in design teams at Jaguar Land Rover Automotive group. The role of the Concept Engineer emphasises the importance of the Engineering and Design/Styling interface with the Concept engineer able to interact and understand the challenges and specific languages of each specialist area, hence improving efficiency and communication within the design team. Automotive education tends to approach design from two distinct directions, that of engineering design through BSc courses or a more styling design approach through BA and BDes routes. The educational challenge for both types of course is to develop engineers and stylist's who have greater understanding and experience of each other's specialist perspective of design and development. The study gives examples of two such courses in the UK who are developing programmes to help students widen their understanding of the engineering and design spectrum. Initial results suggest the practical approach has been well received by students and encouraged by industry as they seek graduates with specialist knowledge but also a wider appreciation of their role within the design process.

Getting round pegs into round holes:getting students onto the right engineering programme

Aston University offers a Foundation year in Engineering and Applied Science. The purpose of this programme is to prepare people with the necessary skills and knowledge required to enrol on an undergraduate programme in Engineering and Applied Science. It is acknowledged there are many misconceptions as to what engineering is. This is further compounded by the lack of knowledge of the different engineering disciplines both by pre-university students and careers teachers [1]. In order to ameliorate this lack of knowledge, Aston University offers a unique programme where students are given the opportunity to have a ?taste? of four Engineering Disciplines: Mechanical Engineering, Electrical Engineering, Chemical Engineering and Computer Science. Alongside these ?taster? sessions, the students study a Professional Skills module where they are expected to keep a portfolio of skills. In their portfolios they comment on their strengths and weakness in relation to six skill areas: independent enquirer, self-manager, effective participator, creative thinker, reflective learner and team worker. The portfolio gives them the opportunity to perform a self-skills audit and identify areas where they have strengths and areas which require work to improve to become a competent professional engineer. They also have talks from engineers who discuss with them their careers and the different aspects of engineering. The purpose of the ?taster? sessions, portfolio and the talks are to encourage the students to critically examine their career aspirations and choose an engineering undergraduate programme which best suits their ambitions and potential skills. The feedback from students has been very positive. The ?taster? sessions have enabled them to make an informed choice as to the undergraduate programme they would like to study. The programme has given them the technical skills and knowledge to enrol on an undergraduate programme and also the skills and knowledge to be a successful learner.

Building bridges for future sustainability? Breaching the research-teaching nexus in engineering education

The relationship between research and learning and teaching represents what has been described as amongst the most intellectually tangled, managerially complex and politically contentious issues in mass higher education (Scott, 2005, p 53). Despite this, arguments that in order to achieve high quality scholarly outcomes, university teachers need to adopt an approach to teaching similar to that of research (founded upon academic rigour and evidence), has long been discussed in the literature. However, the practicalities of promoting an empirical and evidence-based approach to teaching in engineering education make dealing with the research / teaching nexus a somewhat challenging proposition. Using a phenomenographic approach, bringing together and applying the findings of a mixed methodological study, the workshop will adopt an activity based, interactive approach to encourage staff to consider the challenges and benefits of adopting an evidence-based approach to learning and teaching through the utilisation of research to inform their own practice. © 2009 Authors.

Strategic human resource management:building research-based practice

Strategic Human Resource Management: Building Research-Based Practice is a challenging and engaging student-focussed text written by a team of world-class researchers and experienced HRM tutors at Aston University. It is ideal for students taking a HRM or Strategic HRM module at postgraduate and upper-undergraduate level. Structured around contemporary and emerging issues this critical text is designed to encourage students to think analytically about Strategic HRM and builds real-world practice on the basis of solid research evidence. With a unique and thought-provoking range of contents that explores the links between Strategic HRM, Strategic Management and Organisational Behaviour, this text connects theory, research evidence and real-world practice. It also provides examples and case studies covering a variety of organisations, cultures and contexts, with access to the latest in leading-edge thinking. The text also includes integrated consideration of Strategic HRM in an international context, including coverage of emerging markets such as China and India.

Building a holarchy using business process-oriented holonic (PrOH) modeling

The application of systems thinking to designing, managing, and improving business processes has developed a new "holonic-based" process modeling methodology. The theoretical background and the methodology are described using examples taken from a large organization designing and manufacturing capital goods equipment operating within a complex and dynamic environment. A key point of differentiation attributed to this methodology is that it allows a set of models to be produced without taking a task breakdown approach but instead uses systems thinking and a construct known as the "holon" to build process descriptions as a system of systems (i.e., a holarchy). The process-oriented holonic modeling methodology has been used for total quality management and business process engineering exercises in different industrial sectors and builds models that connect the strategic vision of a company to its operational processes. Exercises have been conducted in response to environmental pressures to make operations align with strategic thinking as well as becoming increasingly agile and efficient. This unique methodology is best applied in environments of high complexity, low volume, and high variety, where repeated learning opportunities are few and far between (e.g., large development projects). © 2007 IEEE.

Simulation modelling for business

Simulation modelling has been used for many years in the manufacturing sector but has now become a mainstream tool in business situations. This is partly because of the popularity of business process re-engineering (BPR) and other process based improvement methods that use simulation to help analyse changes in process design. This textbook includes case studies in both manufacturing and service situations to demonstrate the usefulness of the approach. A further reason for the increasing popularity of the technique is the development of business orientated and user-friendly Windows-based software. This text provides a guide to the use of ARENA, SIMUL8 and WITNESS simulation software systems that are widely used in industry and available to students. Overall this text provides a practical guide to building and implementing the results from a simulation model. All the steps in a typical simulation study are covered including data collection, input data modelling and experimentation.

The application of knowledge based expert systems to mechanical engineering design

Investigation of the different approaches used by Expert Systems researchers to solve problems in the domain of Mechanical Design and Expert Systems was carried out. The techniques used for conventional formal logic programming were compared with those used when applying Expert Systems concepts. A literature survey of design processes was also conducted with a view to adopting a suitable model of the design process. A model, comprising a variation on two established ones, was developed and applied to a problem within what are described as class 3 design tasks. The research explored the application of these concepts to Mechanical Engineering Design problems and their implementation on a microcomputer using an Expert System building tool. It was necessary to explore the use of Expert Systems in this manner so as to bridge the gap between their use as a control structure and for detailed analytical design. The former application is well researched into and this thesis discusses the latter. Some Expert System building tools available to the author at the beginning of his work were evaluated specifically for their suitability for Mechanical Engineering design problems. Microsynics was found to be the most suitable on which to implement a design problem because of its simple but powerful Semantic Net Knowledge Representation structure and the ability to use other types of representation schemes. Two major implementations were carried out. The first involved a design program for a Helical compression spring and the second a gearpair system design. Two concepts were proposed in the thesis for the modelling and implementation of design systems involving many equations. The method proposed enables equation manipulation and analysis using a combination of frames, semantic nets and production rules. The use of semantic nets for purposes other than for psychology and natural language interpretation, is quite new and represents one of the major contributions to knowledge by the author. The development of a purpose built shell program for this type of design problems was recommended as an extension of the research. Microsynics may usefully be used as a platform for this development.

Review of progress in implementing the recommendations of Sir Gareth Roberts regarding employability and career development of PhD students and research staff:A report for Research Councils UK by an independent review panel October 2010

The need for improvement in the development of research careers and researchers’ training in transferable skills was highlighted in two particular recommendations (numbers 4.2 and 5.3) in the 2002 report ‘SET for success: the report of Sir Gareth Roberts’ Review - the supply of people with science, technology, engineering and mathematics skills’ (Roberts, 2002). As a consequence of that review, Research Councils UK (RCUK)1 have invested about £120 million, usually referred to as ’Roberts’ Money’, in research organisations to address this concern in all research disciplines. The last ‘Roberts’ Money’ payment will be for the period up to March 2011; it was therefore proposed to assess the progress made with taking forward these specific recommendations. An independent panel was formed by RCUK to undertake this review in 2010. The terms of reference for the panel are in Annex A. In summary, the panel was asked to review progress made and to advise RCUK and the higher education (HE) sector about future requirements for the development and training of researchers. In the course of their review, the panel considered a wide range of existing reports, interviewed key stakeholders in the HE sector and elsewhere, as well as drawing on their own knowledge and expertise. This report presents the findings of the panel’s review.

Realising competitive advantage:bicycle manufacture - manufacturing engineering and management

Students at Cranfield Manufacturing Systems Centre helped Brompton Bikes formulate a strategy to meet rapid sales growth. The students took up Operations Excellence MSc, a two-year part-time programme based on the Cranfield MSc in Engineering and Management of Manufacturing Systems, include the Realising Competitive Manufacture module, which is set out to consolidate and embed the knowledge and skills developed throughout the two-year programme. Guided by StratNav process, the students analysed the product families of Brompton, established the basis on which they compete in the market place, and then benchmarked against key competitors. The top five developments identified to be needed by Brompton are: the formation of group technology cells, creation of a robotic brazing facility, and training and recruitment initiatives for production staff.

"No one said girls could do engineering":a fresh look at an old problem

Previous work has drawn attention to what, in many respects, appears to be an insurmountable problem, the lack of women and girls in engineering. The debate about why young women are not attracted to engineering mostly focuses around issues of gender, with the profession stereotypically perceived as being more suitable for men. In seeking to investigate why this should be the case a participatory research approach was adopted in which two 17 year old female High School students were employed to interview their peers about their perceptions of engineering as a career. This paper presents some of the emergent findings of this research. In total twenty teenage girls from two city centre Schools were interviewed. The two teenage researchers developed the questions themselves, focusing on issues they identified as being important factors informing girls’ views of engineering. This approach provided a ‘new’ perspective – looking at the topic through the eyes of the target sample group. By drawing attention to some of the issues around gender and engineering, this paper contributes to current debates in this area – in doing so it provides a fresh look at an old problem and offers some workable solutions for ‘how to get more girls into engineering’.

Today's pupils tomorrow's engineers! Pedagogy and policy:a UK perspective

Purpose – This paper aims to provide a critical analysis of UK Government policy in respect of recent moves to attract young people into engineering. Drawing together UK and EU policy literature, the paper considers why young people fail to look at engineering positively. Design/methodology/approach – Drawing together UK policy, practitioner and academic-related literature the paper critically considers the various factors influencing young people's decision-making processes in respect of entering the engineering profession. A conceptual framework providing a diagrammatic representation of the “push” and “pull” factors impacting young people at pre-university level is given. Findings – The discussion argues that higher education in general has a responsibility to assist young people overcome negative stereotypical views in respect of engineering education. Universities are in the business of building human capability ethically and sustainably. As such they hold a duty of care towards the next generation. From an engineering education perspective, the major challenge is to present a relevant and sustainable learning experience that will equip students with the necessary skills and competencies for a lifelong career in engineering. This may be achieved by promoting transferable skills and competencies or by the introduction of a capabilities-driven curriculum which brings together generic and engineering skills and abilities. Social implications – In identifying the push/pull factors impacting young people's decisions to study engineering, this paper considers why, at a time of global recession, young people should select to study the required subjects of mathematics, science and technology necessary to study for a degree in engineering. The paper identifies the long-term social benefits of increasing the number of young people studying engineering. Originality/value – In bringing together pedagogy and policy within an engineering framework, the paper adds to current debates in engineering education providing a distinctive look at what seems to be a recurring problem – the failure to attract young people into engineering.

Doing business in India:building research-based practice

In response to the increasing interest in the growth and developments in the Indian economy, and the dynamic nature of the rapidly changing Indian business environment, this textbook is designed to provide a comprehensive guide to doing business in the Indian context. Written by academic experts in their respective fields, this book is divided into three parts: the Indian business context, conducting business in India, and India and the world. Key information is presented on a wide range of topics, including: •Both the shortcomings and opportunities associated with the Indian business environment •The economic development model in India •Critical skills for negotiation and incentives for foreign investors, including case studies of Italian companies that have entered the Indian market in different ways •Business culture in India, including particular customs and etiquette In addition to the pedagogical features, each chapter contains a set of key issues, and there is also a list of useful websites covering a wide range of business needs. This book introduces students to business in India, and will be also be of use to investors, organisations and managers who are already doing business, or intend to start one, in India.

Student input in the development of a marking scheme for improved engineering logbooks

Engineers logbooks are an important part of the CDIO process, as a prequel to the logooks they will be expected to keep when in industry. Previously however, students logbooks were insufficient and students did not appear to appreciate the importance of the logbooks or how they would be assessed. In an attempt to improve the students understanding and quality of logbooks, a group of ~100 1st year CDIO students were asked to collaboratively develop a marking matrix with the tutors. The anticipated outcome was that students would have more ownership in, and a deeper understanding of, the logbook and what is expected from the student during assessment. A revised marking matrix was developed in class and a short questionnaire was implemented on delivery of the adapted matrix to gauge the students response to the process. Marks from the logbooks were collected twice during teaching period one and two and compared to marks from previous years. This poster will deliver the methodology and outcomes for this venture.

Reflective journals:can they be used to identify struggling students?

The ability to identify early failure in knowledge accquisition amongst students is important because it enables tutors to put in place suitable interventions to help struggling students. We hypothesised that if a reflective learning journal is a useful learning tool, there ought to be relationship between the type of journal entries and the depth of knowledge acquisition. Our research question is: can reflectiuve journals be used to identify struggling students? Previous work with reflective journals has not related the level of reflection with module outcomes obtained by the student. In our study, we have classified journal entries written by first year students in a foundationalprogramming module based on the SOLO taxonomy and compared this against the outcomes of two module assessments. Our results suggest that there is potential for using reflective journals to identify struggling stuidents in first year programming.

Engineering the future:CDIO as a tool for combating retention difficulties

With the demand for engineering graduates at what may be defined as an unprecedented high, many universities find themselves facing significant levels of student attrition-with high "drop-out levels" being a major issue in engineering education. In order to address this, Aston University in the UK has radically changed its undergraduate engineering education curriculum, introducing capstone CDIO (Conceive, Design, Implement, Operate) modules for all first year students studying Mechanical Engineering and Design. The introduction of CDIO is aimed at making project / problem based learning the norm. Utilising this approach, the learning and teaching in engineering purposefully aims to promote innovative thinking, thus equipping students with high-level problem-solving skills in a way that builds on theory whilst enhancing practical competencies and abilities. This chapter provides an overview of an Action Research study undertaken contemporaneously with the development, introduction, and administration of the first two semesters of CDIO. It identifies the challenges and benefits of the approach and concludes by arguing that whilst CDIO is hard work for staff, it can make a real difference to students' learning experiences, thereby positively impacting retention. © 2012, IGI Global.