Optimizing supply chain waste management through the use of RFID technology

This paper presents a Decision Support System framework based on Constrain Logic Programming and offers suggestions for using RFID technology to improve several of the critical procedures involved. This paper suggests that a widely distributed and semi-structured network of waste producing and waste collecting/processing enterprises can improve their planning both by the proposed Decision Support System, but also by implementing RFID technology to update and validate information in a continuous manner. © 2010 IEEE.

Sol–gel derived coating applied to long-period gratings for enhanced refractive index sensing properties

Long-period fibre gratings (LPGs) have previously been used to detect quantities such as temperature, strain, and refractive index (RI). We report here, to the best of our knowledge, the first investigation on refractive index sensing properties of LPGs with sol–gel derived titanium and silicon oxide coatings. It is revealed that the RI sensitivity of an LPG is affected by both the thickness and the index value of the coating; a coating with higher index and thickness will enhance the LPG RI sensitivity significantly. The surrounding refractive index induced LPG resonance shift has been evaluated over the LPGs' most sensitive RI region from 1.42 to 1.44. We have identified that, in this region, the uncoated LPG has an RI sensitivity of (-673.0 ± 0.4) nm/uri (unit of refractive index) while the LPG coated with titanium oxide exhibits a sensitivity as high as (-1067.15 ± 0.04) nm/uri. The experimental results also reveal that, even in the RI insensitive region around 1.33, there still is a marked enhancement in RI sensitivity of the sol–gel coated LPG compared to the uncoated one. This is potentially significant as coated LPGs may be extended to low RI gas and semi-liquidized based sensing applications.

Novel hydrogel polymers

Hydrogels may be conveniently described as hydrophilic polymers that are swollen by, but do not dissolve in water. In this work a series of copolymer hydrogels and semi-interpenetrating polymer networks based on the monomers 2-hydroxyethyl methacrylate, N-vinyl pyrrolidone and N'N' dimethyl acrylamide, together with some less hydrophilic hydroxyalkyl acrylates and methacrylates have been synthesised. Variations in structure and composition have been correlated both with the total equilibrium water content of the resultant hydrogel and with the more detailed water binding behaviour, as revealed by differential scanning calorimetry studies. The water binding characteristics of the hydrogels were found to be primarily a function of the water structuring groups present in gel. The water binding abilities of these groups were, however, modified by steric effects. The mechanical properties of the hydrogels were also investigated. These were found to be dependent on both the polymer composition and the amount and nature of the water present in the gels. In biological systems, composite formation provides a means of producing strong, high water content materials. As an analogy with these systems hydrogel composites were prepared. In an initial study of these materials the water binding and mechanical properties of semi-interpenetrating polymer networks of N'N'dimethyl acrylamide with cellulosic type materials, with polyurethanes and with ester containing polymers were examined. A preliminary investigation of surface properties of both the copolymers and semi-interpenetrating polymer networks has been completed, using both contact angle measurements and anchorage dependent fibroblast cells. Measurable differences in surface properties attributable to structural variations in the polymers were detected by droplet techniques in the dehydrated state. However, in the hydrated state these differences were masked by the water in the gels. The use of cells enabled the underlying differences to be probed and the nature of the water structuring group was again found to be the dominant factor.

The morphology of spray-dried particles

Samples of Various industrial or pilot plant spray-dried materials were obtained from manufacturers together with details of drying conditions and feed concentrations. The samples were subjected to qualitative and semi-quantitative examination to identify structural and morphological features. The results were related to measured bulk physical properties and to drying conditions. Single particles were produced in a convective drying process Analogous to spray drying, in which different solids or mixtures of solids were dried from solutions, slurries or pastes as single suspended droplets. The localized chemical and physical structures were analysed and in some cases the retention of volatiles monitored. The results were related to experimental conditions, viz.; air temperature, initial solids concentration and the degree of feed aeration. Three distinct categories of particle morphology were identified, i.e.; crystalline, skin-forming and agglomerate. Each category is evidence of a characteristic drying behaviour which is dependent on initial solids concentration. the degree of feed aeration, and drying temperature. Powder flow ability, particle and bulk density, particle-size, particle friability, and the retention of volatiles bear a direct relationship to morphological structure. Morphologies of multicomponent mixtures were complex, but the respective migration rates of the solutes were dependent on drying temperature. Gas-film heat and SDSS transfer coefficients of single pure liquid droplets were also measured over a temperature range of 50•C to 200•C under forced convection. Balanced transfer rates were obtained attributed to droplet instability or oscillation within the airflow, demonstrated in associated work with single free-flight droplets. The results are of relevance to drier optimisation and to the optimisation of product characteristics, e.g.; particle strength and essential volatiles-retention, in convective drying.

An analysis of the effectiveness of a behavioural based safety intervention in a UK paper mill

This research examines a behavioural based safety (BBS) intervention within a paper mill in the South East of England. Further to this intervention two other mills are examined for the purposes of comparison — one an established BBS programme and the other an improving safety management system through management ownership. BBS programmes have become popular within the UK, but most of the research about their efficacy is carried out by the BBS providers themselves. This thesis aims to evaluate a BBS intervention from a standpoint which is not commercially biased in favour of BBS schemes. The aim of a BBS scheme is to either change personnel behaviours or attitudes, which in turn will positively affect the organisation's safety culture. The research framework involved a qualitative methodology in order to examine the effects of the intervention on the paper mill's safety culture. The techniques used were questionnaires and semi structured interviews, in addition to observation and discussions which were possible because of the author's position as participant observer. The results demonstrated a failure to improve any aspect of the mill's safety culture, which worsened following the BBS intervention. Issues such as trust, morale, communication and support of management showed significant signs of negative workforce response. The paper mill where the safety management system approach was utilised demonstrated a significantly improved safety culture and achieved site ownership from middle managers and supervisors. Research has demonstrated that a solid foundation is required prior to successfully implementing a BBS programme. For a programme to work there must be middle management support in addition to senior management commitment. If a trade union actively distances itself from BBS, it is also unlikely to be effective. This thesis proposes that BBS observation programmes are not suitable for the papermaking industry, particularly when staffing levels are low due to challenging economic conditions. Observers are not available when there are high hazard situations and this suggests that BBS implementation is not the correct intervention for the paper industry.

Computer interpretation of engineering drawings as solid models

Much of the geometrical data relating to engineering components and assemblies is stored in the form of orthographic views, either on paper or computer files. For various engineering applications, however, it is necessary to describe objects in formal geometric modelling terms. The work reported in this thesis is concerned with the development and implementation of concepts and algorithms for the automatic interpretation of orthographic views as solid models. The various rules and conventions associated with engineering drawings are reviewed and several geometric modelling representations are briefly examined. A review of existing techniques for the automatic, and semi-automatic, interpretation of engineering drawings as solid models is given. A new theoretical approach is then presented and discussed. The author shows how the implementation of such an approach for uniform thickness objects may be extended to more general objects by introducing the concept of `approximation models'. Means by which the quality of the transformations is monitored, are also described. Detailed descriptions of the interpretation algorithms and the software package that were developed for this project are given. The process is then illustrated by a number of practical examples. Finally, the thesis concludes that, using the techniques developed, a substantial percentage of drawings of engineering components could be converted into geometric models with a specific degree of accuracy. This degree is indicative of the suitability of the model for a particular application. Further work on important details is required before a commercially acceptable package is produced.

Verification of the standard model of the photorefractive nonlinearity in BSO crystals

On the basis of the standard model for the photorefractive nonlinearity we investigate whether a systematic description of the dependence of two-beam energy exchange on beam polarization and grating vector K is possible. Our result is that there is good agreement between theory and experiment with respect to the polarization properties and semi-quantitative agreement with respect to the K-dependence of the energy exchange.

Modelling nonlinear stochastic dynamics in financial time series

For analysing financial time series two main opposing viewpoints exist, either capital markets are completely stochastic and therefore prices follow a random walk, or they are deterministic and consequently predictable. For each of these views a great variety of tools exist with which it can be tried to confirm the hypotheses. Unfortunately, these methods are not well suited for dealing with data characterised in part by both paradigms. This thesis investigates these two approaches in order to model the behaviour of financial time series. In the deterministic framework methods are used to characterise the dimensionality of embedded financial data. The stochastic approach includes here an estimation of the unconditioned and conditional return distributions using parametric, non- and semi-parametric density estimation techniques. Finally, it will be shown how elements from these two approaches could be combined to achieve a more realistic model for financial time series.

Dissipative nonlinear structures in optical fiber systems I : dissipative dispersion managed solitons in mode-locked lasers

In this first talk on dissipative structures in fiber applications, we extend theory of dispersion-managed solitons to dissipative systems with a focus on mode-locked fibre lasers. Dissipative structures exist at high map strengths leading to the generation of stable, short pulses with high energy. Two types of intra-map pulse evolutions are observed depending on the net cavity dispersion. These are characterized by a reduced model and semi-analytical solutions are obtained.

Can incident reporting improve safety? Healthcare practitioners' views of the effectiveness of incident reporting

OBJECTIVE: Recent critiques of incident reporting suggest that its role in managing safety has been over emphasized. The objective of this study was to examine the perceived effectiveness of incident reporting in improving safety in mental health and acute hospital settings by asking staff about their perceptions and experiences. DESIGN: /st>Qualitative research design using documentary analysis and semi-structured interviews. SETTING: /st>Two large teaching hospitals in London; one providing acute and the other mental healthcare. PARTICIPANTS: /st>Sixty-two healthcare practitioners with experience of reporting and analysing incidents. RESULTS: /st>Incident reporting was perceived as having a positive effect on safety, not only by leading to changes in care processes but also by changing staff attitudes and knowledge. Staff discussed examples of both instrumental and conceptual uses of the knowledge generated by incident reports. There are difficulties in using incident reports to improve safety in healthcare at all stages of the incident reporting process. Differences in the risks encountered and the organizational systems developed in the two hospitals to review reported incidents could be linked to the differences we found in attitudes to incident reporting between the two hospitals. CONCLUSION: /st>Incident reporting can be a powerful tool for developing and maintaining an awareness of risks in healthcare practice. Using incident reports to improve care is challenging and the study highlighted the complexities involved and the difficulties faced by staff in learning from incident data.

Strategic sourcing in the UK bioenergy industry

Successful supply chain management requires the management of a complex, multi-stakeholder, multi-criteria system. Stakeholder inclusion in the supply chain design and decision making processes is an area of growing interest for companies looking to design sustainable supply chains or produce sustainable products. This paper demonstrates the use of the integrated quality function deployment and analytic hierarchy process (QFD-AHP) method for the inclusion of a wide group of stakeholder requirements into the supplier selection process. The method provides a weighted ranked list of evaluating criteria which can be used to assess potential suppliers in the UK renewable bioenergy industry. The bioenergy industry is suitable as there are many stakeholders placing various requirements upon potential biomass suppliers. The paper uses a mixture of literature review and semi-structured industry interviews to answer three research questions: which stakeholder groups are important when selecting biomass suppliers for the UK? What requirements are made by these stakeholders on the supply of biomass fuels and feedstocks? Which evaluating criteria are most important? © 2013 Elsevier B.V.

Dissipative nonlinear structures in optical fiber systems I:dissipative dispersion managed solitons in mode-locked lasers

In this first talk on dissipative structures in fiber applications, we extend theory of dispersion-managed solitons to dissipative systems with a focus on mode-locked fibre lasers. Dissipative structures exist at high map strengths leading to the generation of stable, short pulses with high energy. Two types of intra-map pulse evolutions are observed depending on the net cavity dispersion. These are characterized by a reduced model and semi-analytical solutions are obtained.

Verification of the standard model of the photorefractive nonlinearity in BSO crystals

On the basis of the standard model for the photorefractive nonlinearity we investigate whether a systematic description of the dependence of two-beam energy exchange on beam polarization and grating vector K is possible. Our result is that there is good agreement between theory and experiment with respect to the polarization properties and semi-quantitative agreement with respect to the K-dependence of the energy exchange.

Evaluation of vulnerability factors for cyclones : the case of Patuakhali, Bangladesh

Tropical cyclones are considered as the most severe natural disasters in Bangladesh; they cause extensive damage, create losses in the country׳s economy, and affect social settings. The impact of natural disasters has been further intensified due to various vulnerability factors within the Bangladeshi community such as low income; shortages of food; lack of assets such as land and permanent housing; dense population, illiteracy. This study evaluates the vulnerability factors for cyclones in the community based in the Patuakhali region of south western Bangladesh. The bottom-up research approach was adopted for the study, whereby the local community was consulted for their viewpoints by using focus group interviews and semi-structured interviews. Different community groups and social categories including both men and women, from different age groups and livelihoods, participated in the study. The study revealed how the community׳s vulnerability to cyclones has been further aggravated by socio-economic factors such as social status, political influences and economic conditions. The majority of the community in Patuakhali has been “knowingly” vulnerable to cyclone disaster as a result of the lack of alternatives especially in terms of their livelihood patterns. The vulnerability of women, due to their lack of authority, domestic work, and fear of exposure within the society was also highlighted. The study revealed how vulnerability factors are interlinked with each other making them further difficult to manage. This calls for multi-faceted disaster risk reduction strategies that targets vulnerability factors deriving from different origins and root causes.

Understanding high-value manufacturing in Scottish SMEs

Purpose: The purpose of this paper is to investigate the use of high-value manufacturing (HVM) concepts in Scottish SMEs and define how they are being used to gain competitive advantage. Design/methodology/approach: Cross-sectional research carried out using a large-scale survey of 435 SMEs and semi-structured interviews of a subset of 50 SMEs. Findings: Findings indicate that HVM is not a homogeneous state but an umbrella term for a number of operational models adopted by manufacturers that are progressively moving from simple price-based production; companies must, as a foundation, be operationally excellent in all lifecycle phases before extending their capability by offering a more comprehensive service; HVM is not a static state but a journey that differs in nature for each manufacturer depending on the nature of its market and customer. Research limitations/implications: The approach to theory must be more integrated combining aspects of marketing, strategic and operational theory. Research must be carried out using the supply chain, rather than the firm, as the unit of analysis. Practical implications: Manufacturing efficiency has now become an order qualifier and competitive advantage should now be sought through the integration of design, production and service activities from strategic levels down to operational levels across all the functions of a business which link seamlessly to customer and supplier activities. Originality/value: This paper contains insights into Scottish SMEs and their practice of HVM; defines the activity that makes up HVM at an operational as opposed to an economic or strategic level; proposes a model that characterises the stages of HVM that SMEs transition through. © Emerald Group Publishing Limited.